Integration with Matlab - tests fail

I followed the instructions for MatLab integration
http://help.adobe.com/en_US/Photoshop/11.0/WS62AB0C24-121F-401c-9097-ABCE350A075 Ba.html
but some tests failed. Please explain
Photoshop Extended
Windows 7

Are you running Photoshop in 64 bit?
Try changing back to 32 bit.

Similar Messages

OBEE Integration with EPM workspace failed

Hi,
I am trying to integrate EPM with work space and failing. Initally i tested without copying the file and got reg.proerties file not found in ......\9.5.0.0. Then, I cipied reg.properties file in the appropriate folder ....\9.5.0.0 and tried to register and I am getting the following error.
The EPM Workspace Connection program resulted in a non-zero return code (4294967295). The EPM Workspace Connection program resulted in a non-zero return code (4294967295).
Details:
0 [main] ERROR com.hyperion.hit.registry.RegistryUtils - An error occured when trying create a connection to registry. Detailed message is oracle.jdbc.OracleDriver
com.hyperion.hit.registry.exceptions.RegistryException: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:197)
at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:143)
at com.hyperion.hit.registry.Registry.getInstance(Registry.java:155)
at com.siebel.analytics.web.hyperionregistry.HyperionRegistry.main(HyperionRegistry.java:145)
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:192)
... 3 more
Thank you
Venky

Hi All
I configured the OBIEE with EPM Workspace Connection settings where both Hyperion Workspace and OBIEE are installed in single windows server and it registered with Workspace successfully. I know the 'Source File Path' as "C:\Hyperion\common\config\9.5.0.0\reg.properties", if both Hyperion workspace and OBIEE installed on the same box
However I have Hyperion and OBIEE installed on 2 different boxes, so what is the 'Source File Path' value (how to call Hyperion Server path reg.properties) to be entered in OBIEE->Administration->Manage EPM Workspace Connection screen where OBIEE installed and running.
appreciate if anyone provide pointer to the value to entered in the 'Source File Path' field.
Thanks
Seth

OWSM Integration with Service Registry- Failing

Hi All,
I am trying to import a service published on service registry in OWSM and then trying to test the gateway from OWSM->Tool->TestPage. But I am getting the following error after running the test which is as follows:-
ORABPEL-08021 Cannot find partner wsdl. parnterLink "ManageInventoryService" is not found in process "ManageInventoryService" (revision "1.0") Please check the deployment descriptor of the process to find the correct partnerLink name.
I am also pasting the original service wsdl code below:-
<definitions
name="ManageInventoryService"
targetNamespace="http://www.cognizant.com/ManageInventoryService"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:ns1="http://schemas.oracle.com/bpel/extension"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:client="http://www.cognizant.com/ManageInventoryService"
>
<import namespace="http://schemas.oracle.com/bpel/extension" location="RuntimeFault.wsdl"/>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://www.cognizant.com/ManageInventoryService" schemaLocation="ManageInventoryService.xsd"/>
</schema>
</types>
<message name="ManageInventoryServiceRequestMessage">
<part name="payload" element="client:ManageInventoryServiceProcessRequest"/>
</message>
<message name="ManageInventoryServiceResponseMessage">
<part name="payload" element="client:ManageInventoryServiceProcessResponse"/>
</message>
<portType name="ManageInventoryService">
<operation name="initiate">
<input message="client:ManageInventoryServiceRequestMessage"/>
</operation>
</portType>
<portType name="ManageInventoryServiceCallback">
<operation name="onResult">
<input message="client:ManageInventoryServiceResponseMessage"/>
</operation>
</portType>
<plnk:partnerLinkType name="ManageInventoryService">
<plnk:role name="ManageInventoryServiceProvider">
<plnk:portType name="client:ManageInventoryService"/>
</plnk:role>
<plnk:role name="ManageInventoryServiceRequester">
<plnk:portType name="client:ManageInventoryServiceCallback"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
However when I am trying a dynamic look-up from BPEL on the above service published on service registry it's working fine and returning the expected response.
Please let me know where am I going wrong?It's little urgent and any help will be appreciated.
Thanks.

Thanks Chintan, I think the problem is the needed patch 6133448. I have MLR#9 deployed but I think it does not include 6133448 and I can't install 6133448 as it conflict with MLR#9.
I will check with Oracle.
Thanks
Kish

Integration with Siebel is failing

Hi All,
Siebel is not able to create integration object, while consuming WSDL generated by our BPEL Process.
We have EBMs in WSDL. EBM is referring other schema like meta.xsd etc.
Can any one help in this regards.
I am using Siebel 8.1
Thanks in advance.

Hi Vikky,
Make sure that your BPEL wsdl has only one schema element.
If you have many imports with each in one schema element ...modify them and put all in one schema element.
And another thing is your request XSD should in same folder where you are placing BPEL WSDL.
Regards
PavanKumar.M
Edited by: pavan4s on Aug 3, 2010 9:31 PM

My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?

My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?

Sounds like you may have a harddrive issue. You are probably going to need to get that changed out and then install the OS X again to get it going.

Test failed BAM-00553 Error when integrating B2B with BAM

Hi,
We used the following link to integrate B2B with BAM.
Oracle Fusion Middleware User’s Guide for Oracle B2B 11g.
Monitoring Instance Message Data With Oracle BAM
http://docs.oracle.com/cd/E15586_01/integration.1111/e10229/b2b_bam.htm#CFHJIBHC
server is running on linux machine..
we got the following error when we create Enterprise Message Sources and try to start it.
Name: B2B_EMS
Owner: weblogic
Created: 1/23/2012 9:02:17 AM
Last modified: 1/25/2012 8:37:43 AM
Status: Test failed - BAM-00553: Resources start operation for destination jndi/jms/bamqueue failed.
Initial Context Factory: weblogic.jndi.WLInitialContextFactory.
JNDI Service Provider URL: t3://soahost:9001.
Topic/Queue Connection Factory Name: jms/BAMAQQueueCF.
Topic/Queue Name: jndi/jms/bamqueue.
JNDI Username: .
JNDI Password: .
JMS Message Type: TextMessage.
Durable Subscriber Name (Optional): .
Message Selector (Optional): .
Data Object Name: /Samples/B2B/B2BDO.
Operation: Insert.
Batching: No.
Transaction: No.
Start when BAM Server starts: Yes.
JMS Username (Optional): .
JMS Password (Optional): .
Please suggest with the solution, also provide with any of other sample which defines B2B and BAM Integration.
Regards
Shankar

Hi,
We used the following link to integrate B2B with BAM.
Oracle Fusion Middleware User’s Guide for Oracle B2B 11g.
Monitoring Instance Message Data With Oracle BAM
http://docs.oracle.com/cd/E15586_01/integration.1111/e10229/b2b_bam.htm#CFHJIBHC
server is running on linux machine..
we got the following error when we create Enterprise Message Sources and try to start it.
Name: B2B_EMS
Owner: weblogic
Created: 1/23/2012 9:02:17 AM
Last modified: 1/25/2012 8:37:43 AM
Status: Test failed - BAM-00553: Resources start operation for destination jndi/jms/bamqueue failed.
Initial Context Factory: weblogic.jndi.WLInitialContextFactory.
JNDI Service Provider URL: t3://soahost:9001.
Topic/Queue Connection Factory Name: jms/BAMAQQueueCF.
Topic/Queue Name: jndi/jms/bamqueue.
JNDI Username: .
JNDI Password: .
JMS Message Type: TextMessage.
Durable Subscriber Name (Optional): .
Message Selector (Optional): .
Data Object Name: /Samples/B2B/B2BDO.
Operation: Insert.
Batching: No.
Transaction: No.
Start when BAM Server starts: Yes.
JMS Username (Optional): .
JMS Password (Optional): .
Please suggest with the solution, also provide with any of other sample which defines B2B and BAM Integration.
Regards
Shankar

Testing the enterprise portal in integration with documentum.

hi
can any one plz tell me how to test the enterprise portal when it is integrated with the documentum(content server).in order to check how the data is flowing from documentum to sap portal.
regards,
babu.

Have a look
test the system alias connection.If it is successful , then it will work.
https://www.sdn.sap.com/irj/scn/thread?messageID=977224
Koti Reddy

[svn] 1013: Bug: LCDS-180 - [WebLogic 10.1 on Suse9] MxUnit Dynamic destination "SecurityEmployeeUser" test fails with a NullPointerException

Revision: 1013
Author: [email protected]
Date: 2008-03-28 17:24:25 -0700 (Fri, 28 Mar 2008)
Log Message:
Bug: LCDS-180 - [WebLogic 10.1 on Suse9] MxUnit Dynamic destination "SecurityEmployeeUser" test fails with a NullPointerException
QA: Yes
Doc: No
Details:
This prevents the NPE but for non-servlet endpoints you need to be sure to define your users/roles in Weblogic's default security realm. The test was failing because login was failing, most likely because the regression server wasn't fully configured.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-180
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/weblogic/flex/messaging/security/WeblogicLoginComm and.java

ConnectionBean fail with stress test. please assist.

I am using the following to get connected to database.
package com.db;
import java.util.*;
import java.io.*;
import java.sql.*;
import javax.servlet.http.*;
public class ConnectionManager implements HttpSessionBindingListener
private Connection connection;
private Statement statement;
private String driver = "";
private String dbURL = "";
private String login = "";
private String password = "";
static public void main(String[] args)
      ConnectionManager cm = new ConnectionManager();
} // main
public ConnectionManager()
       Properties Prop = new Properties();
       try {
          InputStream configStream = getClass().getResourceAsStream("/config/database.properties");
               Prop.load(configStream);
          configStream.close();
           } catch(IOException e) {
                  System.out.println("Error: Cannot laod configuration file ");
       driver =Prop.getProperty("driver");
       dbURL = Prop.getProperty("dbURL");
        login = Prop.getProperty("login");
        password = Prop.getProperty("password");
public void setDriver (String sDriver)
   if (sDriver != null)
       driver = sDriver;
public String getDriver ()
   return driver;
public void setDbURL (String sDbURL)
    if (sDbURL != null)
     dbURL = sDbURL;
public String getDbURL()
   return dbURL;
public void setLogin (String sLogin)
   if (sLogin != null)
      login = sLogin;
public String getLogin()
   return login;
public void setPassword (String sPassword)
   if (sPassword != null)
      password = sPassword;
private String getPassword()
   return password;
private void getConn ()
   try
      Class.forName(driver);
      connection = DriverManager.getConnection(dbURL,login,password);
      statement=connection.createStatement();
   catch (ClassNotFoundException e)
      System.out.println("ConnectionManager: driver unavailable");
      connection = null;
   catch (SQLException e)
      System.out.println("ConnectionManager: driver not loaded");
      connection = null;
public Connection getConnection()
   if (connection == null)
      getConn();
   return connection;
public void commit() throws SQLException
    connection.commit();
public void rollback() throws SQLException
    connection.rollback();
public void setAutoCommit(boolean autoCommit)
    throws SQLException
    connection.setAutoCommit(autoCommit );
public ResultSet executeQuery(String sql) throws SQLException
    if (connection == null || connection.isClosed())
        getConn();
    return statement.executeQuery(sql);
public int executeUpdate(String sql) throws SQLException
    if (connection == null || connection.isClosed())
        getConn();
    return statement.executeUpdate(sql);
public void valueBound(HttpSessionBindingEvent event)
    System.err.println("ConnectionBean: in the valueBound method");
    try
      if (connection == null || connection.isClosed())
        connection = DriverManager.getConnection(dbURL,login,password);
        statement = connection.createStatement();
    catch (SQLException e)
      e.printStackTrace();
      connection = null;
public void valueUnbound(HttpSessionBindingEvent event)
    close();
public void close()
   try
       if ( connection != null
            || !connection.isClosed())
        connection.close();
   catch (SQLException e)
      e.printStackTrace();
}This is what I use to test this code:
<%@ page import="java.sql.*" %>
<%@ page import="java.text.*" %>
<%@ page import="java.util.*"%>
<%@ page import="java.io.*" %>
<p>
Testing DBConnection Bean. <p>
<%
String sql="SELECT * FROM BS_PERSON" ;
com.db.ConnectionManager CM = new com.db.ConnectionManager();
ResultSet rset = CM.executeQuery(sql);
while (rset.next()) {
   out.println(rset.getString("PERSON_USERCODE") + "<br>");
%>When I stress test it, the code perform well for a while and then throw the following on Tomcat:
ConnectionManager: driver not loaded
ConnectionManager: driver not loaded
ConnectionManager: driver not loaded
Is there anything I could improve?
For application that has many database read/write, is there any open source connection program that uses connection pooling?
Thank you.

Thank you for the prompt response.
Yes. the code works and the data set gets return when I execute the code. It only fail with stress test after say 150-160 hits.
I have put in the printStack Trace and got the following:
ConnectionManager: driver not loaded
java.sql.SQLException: ORA-00020: maximum number of processes (150) exceeded
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.O3log.receive1st(O3log.java:407)
     at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:259)
     at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:346)
     at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:468)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
     at java.sql.DriverManager.getConnection(DriverManager.java:512)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
     at com.db.ConnectionManager.getConn(ConnectionManager.java:106)
     at com.db.ConnectionManager.executeQuery(ConnectionManager.java:154)
     at org.apache.jsp.dbconnection_jsp._jspService(dbconnection_jsp.java:76)
Could it be that I didn't specifically close the connection? How could I go about doing it?
Thank you.

Unit test runs perfectly fine with NUnit but fails when run from TestExplorer

Hello all,
I have a TestProject, Harmony.Tests. In there, I have a method AddApplicationEvent()
which calls another method Send(InvokeRequestMessage requestMessage) which calls a webservice (OperationHandlerBrokerWebService).
The code snippet looks like this. This is not the complete code but a part where we are calling the web service. It fails on the underlined Italic line of code.
OperationHandlerBrokerWebService brokerService = new OperationHandlerBrokerWebService();
brokerService.UseDefaultCredentials = true;
brokerService.Url = address;
brokerService.Timeout = timeoutInMilliseconds;
byte[] serializedResponseMessage = brokerService.InvokeOperationHandler(serializedRequestMessage);
The same test works and passed fine when I ran it with NUnit, but failed with following exception when I tried to run it from TestExplorer.
Test Name: AddApplicationEvent
Test FullName: N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.AddApplicationEvent
Test Source: d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs : line 665
Test Outcome: Failed
Test Duration: 0:00:00.296
Result Message:
SetUp : Message returned System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: Invalid token for impersonation - it cannot be duplicated.
at System.Security.Principal.WindowsIdentity.CreateFromToken(IntPtr userToken)
at System.Security.Principal.WindowsIdentity..ctor(SerializationInfo info)
at System.Security.Principal.WindowsIdentity..ctor(SerializationInfo info, StreamingContext context)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._SerializationInvoke(Object target, SignatureStruct& declaringTypeSig, SerializationInfo info, StreamingContext context)
at System.Reflection.RuntimeConstructorInfo.SerializationInvoke(Object target, SerializationInfo info, StreamingContext context)
at System.Runtime.Serialization.ObjectManager.CompleteISerializableObject(Object obj, SerializationInfo info, StreamingContext context)
at System.Runtime.Serialization.ObjectManager.FixupSpecialObject(ObjectHolder holder)
at System.Runtime.Serialization.ObjectManager.DoFixups()
at System.Runtime.Serialization.Formatters.Binary.ObjectReader.Deserialize(HeaderHandler handler, __BinaryParser serParser, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream, HeaderHandler handler, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream)
at N4S.Forms.OperationHandlerBroker.AMessage.DeserializeMessage(Byte[] serializedMessage)
at N4S.Forms.OperationHandlerBroker.WebServiceServer.BrokerService.InvokeOperationHandler(Byte[] serializedInvokeRequestMessage)
--- End of inner exception stack trace ---
expected: <0>
but was: <1>
Result StackTrace:
at N4S.Harmony.Tests.TestHelper.InvokeOperation(OperationHandler handler, OperationHandlerInput input, Boolean expectedToWork) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 136
at N4S.Harmony.Tests.TestHelper.LoginAsUser(String username, String password) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 394
at N4S.Harmony.Tests.TestHelper.Login(TestUserName requestedUser) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 377
at N4S.Harmony.Tests.TestHelper.LoginAsAdvisor() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 230
at N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.Login() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs:line 76
at N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.SetupTest() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs:line 67
I am not sure what causing the issue. I checked the Credentials, Windows Identity during both the test run and there is no difference. Please advise !!
Thanks,
Deepak

Hi Tina,
Thanks for your reply.
I do have NUnit adapter installed. I even noticed that the test runs fine with NUnit GUI and also if I run it through Resharper Test Explorer window.
As you can see in the image above the same test is passed when I ran it from Resharper Unit Test Explorer window but fails when I ran it from Test Explorer window. I also captured the information on fiddler.
There was a significant difference in the Header Content length. Also under the User-Agent property the protocol versions are different.
Not sure why VSTest ExecutionEngine is picking a different version.
The UnitTest in question is calling a webservice method which in turn calls a method from another referenced project.
Web Service class
using System;
using System.Web.Services;
using N4S.Forms.OperationHandlerBroker.Server;
using NLog;
namespace N4S.Forms.OperationHandlerBroker.WebServiceServer
/// <summary>
/// The operaton-handler broker service.
/// </summary>
[WebService(Description = "The N4S Forms Operation-Handler Broker Web-Service.", Name = "OperationHandlerBrokerWebService",
Namespace = "N4S.Forms.OperationHandlerBroker.WebServiceServer")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
public class BrokerService : WebService
{ /// <summary>
/// Calls <see cref="HandleRequest"/>. Updates performance-counters.
/// </summary>
/// <param name="serializedInvokeRequestMessage">the binary-serialized <see cref="InvokeRequestMessage"/></param>
/// <returns>the binary-serialized response message</returns>
[WebMethod(BufferResponse = true, CacheDuration = 0, Description = "Invokes the requested operation-handler and returns a binary-serialized response-message.", EnableSession = false)]
public byte[] InvokeOperationHandler(byte[] serializedInvokeRequestMessage)
logger.Trace(Strings.TraceMethodEntered);
PerformanceMonitor.RecordRequestStarted();
InvokeRequestMessage requestMessage = (InvokeRequestMessage) AMessage.DeserializeMessage(serializedInvokeRequestMessage);
InvokeResponseMessage responseMessage;
try
responseMessage = HandleRequest(requestMessage);
PerformanceMonitor.RecordSuccessfulRequest();
catch (Exception)
PerformanceMonitor.RecordFailedRequest();
throw;
finally
PerformanceMonitor.RecordRequestEnded();
logger.Trace(Strings.TraceMethodExiting);
return AMessage.SerializeMessage(responseMessage);
UnitTest snippet
OperationHandlerBrokerWebService brokerService = new OperationHandlerBrokerWebService();
brokerService.UseDefaultCredentials = true;
byte[] serializedResponseMessage = brokerService.InvokeOperationHandler(serializedRequestMessage);
Please advise.
Thanks,
Deepak

How to test whether AIA got integrated with BRM system successfully

Is there a procedure to test whether AIA got integrated with BRM system successfully.How can i test whether BRM Adapter is able to connect to BRM system.
Thanks well in advance
Santosh

Hi Santhosh,
I hope you are using AIA 2.0/2.0.1 for Comms and trying to integrate BRM with Siebel.
1. To check BRM & Siebel integration using AIA. (BRM is the Product master gets synched with Siebel.)
a) Create a new Product in BRM pricing center(Provide product name, Service type)
b) Select Event(Single time purchase event)
c) Provide rating for the product
d) Commit after product creation(Check in BPEL process, whether all the instances are went through successfully)
e) Check Siebel Catalog, whether product got synched from BRM
2. To check whether BRM Adapter connected to BRM,
a) Login into Oracle Application server
b) Select OC4J instance, where your AIA is running
c) Select Applications
d) In view drop down select "StandAlone Resource Adapters"
e) Check the status (green or red) in the installed BRM adapter
If you haven't deployed BRM Adapter read the installation guide to deploy it.
Regards,
Ziaur Rahuman

Help with "Testing Failed" Error message in iWeb09

I bought the iLife 09 upgrade purely so I could publish to my own domain server. I have a MobileMe account and iWeb09 publishes fine there--no problems.
My domain name is hosted on a Windows NT server. The admin is willing to help, but I was hoping someone could point me to documentation for this error:
"Testing Failed.
Unable to write to server. Verify your settings and try again."
If I ftp to the site in a terminal window and do a put, I can write to the site. Obviously, I could at some point, because it servers the "dummy" page I put up, but I tested again in case my permissions had changed.
I looked at the "Publishing to Windows-based FTP Server" but it does not seem to describe this error.
BTW, I pay AppleCare for support, but when I tried to get support documentation from them, the tech said they "can't help" with this part of iWeb and hung up on me--the call lasted exactly 90 seconds.
I am hoping someone out here will know where the errors are documented or will be able to help me figure it out.

I waded through the posts for iWeb09 and came across a recommendation for Cyberduck (www.cyberduck.ch), so I tried a copy. Works like a champ. Unlike iWeb09, all I had to do was type in my server name, user name, and password to open the connection. Then I published my site to a folder in iWeb and uploaded the folder in Cyberduck. Cyberduck had no problem writing to the server.
I still would love to know why iWeb can't write to my web server.

Trouble with the pass/fail test

I started having this trouble just recently and I can't figure out the problem. Just all of a sudden (without me changing anything anywhere apparently), whenever I call a pass/fail test and if the test fails, the sequence execution immediately goes to the <End Group> step. I want the execution to proceed with the next step regardless of a pass or a fail. I have rechecked the run options repeatedly and there's nothing in there that might be causing this. Also, if a pass/fail step fails and I am running on single pass, even the report does not get generated.
I know it can be really hard for someone out there to tell me what the problem is. I am posting this message here just to see if people have any general comments/suggestions on what might be going on (perhaps this is a common problem which someone has run into before). The comments/suggestions might help me debug the problem.
Thanks
Anuj

Hi Anuj,
Do you have other step type in the same sequence or just Pass/Fail type?
What adapter type are you using, LabVIEW, CVI, etc...
Does it happen in the just one sequence or any sequence?
What versions are you using?
Posting an example would help.
Regard
Ray Farmer
Regards
Ray Farmer

CodedUI Tests Fails Intermittently With Initialization Errors

I would like to re-ask the question asked in this thread:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/855c561b-2100-4494-bf65-c5b9ec83e4af/inconsistent-coded-ui-test-behavior-depending-on-lab-size?forum=vsmantest
There was no answer given and no more replies coming in to that thread.
We are exactly in the same situation. We have large number of CodedUI test cases (500+) which runs daily. Some of the tests fails intermittently with the initialization failures. The details are:
ERROR MESSAGE
Error calling Initialization method for test class TEST_CLASS_NAME: System.Runtime.InteropServices.COMException: Error HRESULT E_FAIL has been returned from a call to a COM component.
ERROR STACK TRACE
Microsoft.VisualStudio.TestTools.UITest.Playback.Engine.IRPFPlayback.SetSkipStepEventName(String skipStepEventName)
Microsoft.VisualStudio.TestTools.UITest.Playback.ScreenElement.InitPlayback()
Microsoft.VisualStudio.TestTools.UITesting.Playback.Initialize()
Could someone please let us know what could be the issue of these intermittent failures?

Hi digitali,
According to your description, I would like to know the details:
How many agent machines in the lab environment?
What’s the details of these machines? (e.g. memory, system)
What’s the version of TFS, MTM, test controller and test agent?
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Outbound integration with peoplesoft HRMS using a soap adaptor fails

We are trying to do outbound integration with peoplesoft HRMS as a part of interface requiremnt,we are using soap adaptor for this,we are getting the following error
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message transmission failure, response code: 500 at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1731) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1473) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeInputOnlyOperation(WSIFOperation_JaxRpc.java:1156) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:865) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:781) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:801) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:208) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:127) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:118) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:95) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1444) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:112) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:305) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispatcher.java:138) at oracle.tip.esb.server.dispatch.DeferredEventDispatcher.processSubscriptions(DeferredEventDispatcher.java:153) at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(EventDispatcher
Any clues about this..
How to add HTTP header on top of the response..
Thanks,
Azeem.

We have this working at our organization and my guess is that this is related to either a missing routing or having no security set on the service operation. We are only exploring this in test but we have the ESB set up as node in Peoplesoft. There is then routing defined from that node to financials. On the service operation we have attached the role PTPT1200. I am sure this is not best practice but we are currently only testing.
If you want to attach headers for authentication/authorization I am sure it is defined in the documentation although I don't have the link in front of me.

Integration with Matlab - tests fail

Similar Messages

Maybe you are looking for