Intel and Lion simply isnt having anything to do with my p ower mac pro G5 running leopard 10.5.8, How can i get Lion to accomodate my media files at least?
I upgraded from my
mac pro power pc, G5 ( running leopard 10.5.8 combo update)
to
an Intel iMac Running Lion,
after failing to move my data with migration assist, then target disk mode - i phoned Apple - which said id need an external drive.
I used time machine to copy my user data from my G5. However Lion will not recognize the external drive.
Ive been at this for a few days and anxious to expedite the move, mostly photos, and media files.
If Re-formatting is the only way.....is there a way to do so without another day of re-copying by firewire.
The external drive is a Ciel Lx , recomended to me by apple.
Any one else making the move from power to intel? Havent found much posted recently.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4
On both please.
Similar Messages
-
I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!
Hi there Rlong50,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W. -
How can I get Lion re installed after crash and no recovery disk?
I bought Lion some time ago I did not do a recovery disk and now I had a huge crash. I started over with Snow Leopard cause that's all I had. How can I get Lion re installed?
Make sure you're up to 10.6.8 through Software Updates, and then re-download Lion from the App Store.
Incidentally, many Macs (from 2010 models onwards) have the ability to run Internet Recovery, even if your original hard drive crashed, which will allow you to re-download and install Lion directly from the internet.
But the best way is always to have a local backup of your system drive.
Matt -
Every time I open Safari, I get a message (and a pop-up) that says the Safari browser I'm using does not support Community Toolbar. How can I get rid of the Community Toolbar or at least turn it off?
That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery. -
I have a macbook pro and I connected a new iphone to my computer. Somehow all my pictures in the iphoto app deleted. How can I get them back, and no I do not have my TimeMachine On. Please help!
If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108 -
Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?
Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?
gmiller0 wrote:
My mac has 10.7.3 and will not connect to wifi after it wakes up. Have contacted AppleCare but the problem cannot seem to be resolved.. I guess this is a major issue with Lion:(
What model of Mac? I have a MBP running 10.7.3 and do not have that issue. From the other couple of posts I've seen about it, it seems to be maybe an issue with some iMacs? Have your tried searching the Lion or iMac forums for similar issues, just to see if anyone has hit on why it is happening? -
How can I get LION to let me see the side of folders?
How can I get LION to let me see the side of folders?
and files? at the bottom of the window as in snow leopard.
I miss this and rely on it to monitor the available space on the hard drives ect.Dov, that is close but not in the status bar but at the bottom of the volder window. Surely , everyone can't have forgotten snow leopard and leopard et al already, where you could could to display at the bottom of all ovened folders to see the status of the the files and hard drive. Boy I WISH I HAD A SCREEN SHOT OF WHAT I AM TALKING ABOUT.
Yes you can get the info from get info and in the list view. But we use to be able to have a line at the bottom that gave a running total, which to me was very useful as I throughput mondo files to discrete drives thoughout my network for sorting photos by topic to seperate drives.
ah here we go a screen shot off my macbook running snow leopard, it is that grey bar at the bottom which says "4 items 137,26 GB available",that I am wanting in the LION window bottom. -
I just bought PSE 11. Serial No. accepted but Error appears, preventing me to install. What is wrong OR, how can I get program installed? I've tried at least four times!! Jim H.
Use the instructions here to completely remove/uinstall all iTunes/Apple software and componenets and then start from scratch.
http://support.apple.com/kb/HT1923
B-rock -
I am still running Leopard Mac OS X 10.5.8. How can I get Lion Mac OS X 10.6, so I can update to Mountain Lion?
Upgrading to Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
If you need to purchase Lion call 1-800-692-7753 or 1-800-676-2775. Ask for a Sales Representative. They will check your Apple ID, and email you a code and instructions. The cost is $29.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion. -
I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?
If it's slow on startup it would be extensions loading or LaunchDaemons starting up.
You should have a look in:
/Library/LaunchDaemons
/Library/Extensions
You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. -
Hi everyone,,i bought a used iphone 5 with iOs 7.0.3. i want to delete the icloud account and add mine. I have sent an e-mail to the current account being used in my iphone. How can i get rid of this account plzzz help me ou
no i called the store owner from whom i bought it. he was like i will check in records and if there is something i will let u know...he was like send an e-mail its better so if it was stolen so the shopkeeper wouldnt let me to e-mail to the owner
-
I Have just downloaded the latest upgrade (through software update) and now my Mac Book Pro will not boot up !! how can I get out of this ?,
Try starting in safe mode:
Ciao. -
when I have a pdf file open, I used to be able to click on "Bookmarks" tab on left side and allow me to click on each individual page and delete if I needed to. Now when I click on the Bookmarks tab, that section is empty. How can I get it to show each page again?
Hi chrismarks1,
I think you may be confusing bookmarks with thumbnails. If you click the Page Thumbnails icon (the one above the Bookmarks icon), then you can delete a page by clicking its thumbnail, and clicking the Delete Pages icon (the trashcan icon). Just make sure that you're viewing the PDF file in Acrobat (rather than Acrobat Reader), as you can't delete pages from Reader.
Best,
Sara -
Hi, I rented a movie off iTunes but the there is no sound. I've bought and rented previous movies and I've never had any problems with the sound before. Is this some kind of glitch? How can I get my money back?
Hey grossa2,
First, here is a way to report an issue with your purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Then, I'd go through this article, which helps troubleshoot a lack of audio playback in iTunes:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Take care,
Delgadoh -
How can I get iTUNES library to display renamed files and folders (renamed with Windows Explorer)?
How can I get iTunes library to display the new names and organisation of tracks and albums (ie files and folders) that I have renamed and reorganised (using Windows Explorer) having previously imported them using iTunes?
(Even when I relocate "lost" tracks in iTunes (using the drop down menu facility to view in Windows explorer), although iTunes will then play the track, and knows where to find it, it refuses to display the track with its correct (new) name, or show it the correct (new) album. That means I have lots of things called "Untitled" and "Track 01" etc, all of which have actually been renamed, but iTunes does not seem to have the capability to recognise the changes and update its library listing. Another example - a Tchaikovsky CD with 3 major works in 13 tracks insists on displaying in iTunes as 13 tracks in one album, despite the fact that I have reorganised the tracks into 3 albums - two being Swan Lake and The Nutcracker - and renamed the individual tracks to a more useable format.)Thanks for your replies ckuan
I agree with Tgod that your first solution does not work. It appears unpredictable whether the old or new file names are listed when you drag the folders into iTunes from Windows Explorer. The folder structure is completely missing. I reckon if you have to muck around spending days/weeks/months finding out how to fix links to a secret meta-file (obviously designed by some deep-cover microsoft worm working in the Apple!), then it's pretty obvious that almost any alternate way of doing this would be better. Bye bye iTunes!!
Incidentally, I tried several other things that (if the software was designed intuitively) should work, but give disastrous results:
1) when deleting the library listing in iTunes, it gives you two options - one is to remove the listings to the Recycler. Be aware that IF you select that option, it removes not only your library listing, but also your ACTUAL MUSIC FILES to the Recycler. Moreover, it does NOT remove the insidious secret meta-file that is what apparently keeps rewriting old names over your carefully renamed file names, and keeps totally ignoring your carefully designed folder (album) structure. OK - not a complete disaster, as I realised and went hunting through the chaos in the Recycler to recover all my files. No thanks to the genius who designed this brilliant feature!
2) after deleting the library listing in iTunes, I attempted to import just the folders that I wanted. iTunes refused to allow me to do that, and proceeded to try to import every frigging music file it could find on my whole hard drive, in apparently random fashion into the library. Whoever thought up that doozy either never ever tried to use or market test it, or has modified their mind rather too many times with artificial substances so their brain is like muesli chop suey.
3) oh why go on, it's too depressing ...
Maybe you are looking for
-
Acrobat XI Pro: very frequent crashing.
I have Acrobat XI Pro at home and at work, and I love its features and use it several times a week to edit pdf documents. It is essential to the work I'm doing. However, the program crashes very frequently when I am doing this, and the loss of work
-
MS Word 2007 - An error occurred while saving the Normal Template
Good Morning... I have a user that is getting the following error. I can resolve the issue if I delete the old normal.dotm and let it create a new one however this users has a lot of custom building blocks and she didn't have a good backup. From wha
-
Time Machine sees more data than actually exists
Another way to put it is that Time Machine requires more space than is needed. I found similar posts, but none that were solved. My MacPro has a 160GB startup drive, and three 1TB (931.2GB formatted) storage drives in it. I have a 1TB external FW800
-
Dear all, We have changed the credit account for one of our customers in FD32 The issue now is that when I check the VBAK table the credit account that was changed in FD32 still shows in the table. Is there a way to remove the credit account that was
-
Getting the Selected Role Tab in WebDynpro at runtime.
Hello Friends, I have a requirement to know the selected Role tab in portal at runtime and want to use this reference in WebDynpro. I did a fare research and found that this is possible in tag library however i haven't got anything for WebDynpro. Req