Intel KMS + mplayer with .32 kernel

Hi
Just want to mention that with the new 2.6.32 kernel from [testing] mplayer works again in framebuffer with intel KMS
I have a 915 GM chipset and was not able to watch a movie in tty for months (since I switched to KMS). Just use it with -vo fbdev2.

Wow, this is great. Last time I tried was with 2-6.32-rc8 and it didn.t work. Glad they managed to fix it before releasing -final.

Similar Messages

Radeon Early KMS Fails with Linux LTS

Upgraded to linux-lts 3.0.72-1 yesterday. Kernel now hangs for 60 seconds during the KMS switch with the following error messages (with both the main initramfs and the fallback):
[ 61.120047] r600_cp: Failed to load firmware "radeon/REDWOOD_pfp.bin"
[ 61.120083] [drm:evergreen_startup] *ERROR* Failed to load firmware!
[ 61.120121] radeon 0000:01:00.0: disabling GPU acceleration
GPU acceleration is then disabled and I cannot activate desktop effects.
Here's the full dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.71-1-lts (nobody@andyrtr) (gcc version 4.7.2 (GCC) ) #1 SMP Fri Mar 29 11:32:47 CET 2013
[ 0.000000] Command line: root=/dev/system/root cryptdevice=/dev/sda2:root ro apparmor=1 security=apparmor init=/usr/sbin/e4rat-preload-lite initrd=/initramfs-linux-lts.img BOOT_IMAGE=/vmlinuz-linux-lts
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Dell Inc. Inspiron 530/0RY007, BIOS 1.0.18 02/24/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 100000000 mask F00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 220000000 mask FF0000000 write-back
[ 0.000000] 3 base 000000000 mask F80000000 write-back
[ 0.000000] 4 base 080000000 mask FC0000000 write-back
[ 0.000000] 5 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 6 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f3f00] f3f00
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfe90000 page 4k
[ 0.000000] kernel direct mapping tables up to 0xcfe8ffff @ [mem 0x1fffa000-0x1fffffff]
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 0x22fffffff @ [mem 0xcfe8a000-0xcfe8ffff]
[ 0.000000] RAMDISK: 7fa7d000 - 7ffff000
[ 0.000000] ACPI: RSDP 00000000000f97a0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000cfee3080 0005C (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000cfee7200 000F4 (v03 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000cfee3200 03FFC (v01 DELL AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfe90000 00040
[ 0.000000] ACPI: HPET 00000000cfee73c0 00038 (v01 DELL FX09 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000cfee7400 0003C (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SLIC 00000000cfee7440 00176 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DMY2 00000000cfee75c0 00080 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000cfee7300 00084 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 00000000cfee7ca0 00380 (v01 PmRef CpuPm 00003000 INTL 20041203)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227600000-ffff88022e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cfe90
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096670
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833224 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfee3000
[ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022fc00000 s79360 r8192 d23040 u524288
[ 0.000000] pcpu-alloc: s79360 r8192 d23040 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065305
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/system/root cryptdevice=/dev/sda2:root ro apparmor=1 security=apparmor init=/usr/sbin/e4rat-preload-lite initrd=/initramfs-linux-lts.img BOOT_IMAGE=/vmlinuz-linux-lts
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8185976k/9175040k available (4280k kernel code, 788360k absent, 200704k reserved, 5168k data, 744k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2992.609 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.21 BogoMIPS (lpj=29926090)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000095] Security Framework initialized
[ 0.000115] AppArmor: AppArmor initialized
[ 0.010311] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.013697] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015293] Mount-cache hash table entries: 256
[ 0.015649] Initializing cgroup subsys cpuacct
[ 0.015684] Initializing cgroup subsys memory
[ 0.015706] Initializing cgroup subsys devices
[ 0.015708] Initializing cgroup subsys freezer
[ 0.015710] Initializing cgroup subsys net_cls
[ 0.015712] Initializing cgroup subsys blkio
[ 0.015755] CPU: Physical Processor ID: 0
[ 0.015756] CPU: Processor Core ID: 0
[ 0.015758] mce: CPU supports 6 MCE banks
[ 0.015766] CPU0: Thermal monitoring enabled (TM2)
[ 0.015770] using mwait in idle threads.
[ 0.016853] ACPI: Core revision 20110413
[ 0.020014] ftrace: allocating 16930 entries in 67 pages
[ 0.025685] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.128257] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
[ 0.130000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.130000] ... version: 2
[ 0.130000] ... bit width: 40
[ 0.130000] ... generic registers: 2
[ 0.130000] ... value mask: 000000ffffffffff
[ 0.130000] ... max period: 000000007fffffff
[ 0.130000] ... fixed-purpose events: 3
[ 0.130000] ... event mask: 0000000700000003
[ 0.130000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.130000] Booting Node 0, Processors #1
[ 0.130000] smpboot cpu 1: start_ip = 99000
[ 0.290024] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.290056] Brought up 2 CPUs
[ 0.290058] Total of 2 processors activated (11970.20 BogoMIPS).
[ 0.291770] devtmpfs: initialized
[ 0.291770] PM: Registering ACPI NVS region at cfe90000 (339968 bytes)
[ 0.291770] Time: 22:30:54 Date: 04/09/13
[ 0.291770] NET: Registered protocol family 16
[ 0.291770] ACPI: bus type pci registered
[ 0.291770] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.291770] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.325013] PCI: Using configuration type 1 for base access
[ 0.325392] bio: create slab <bio-0> at 0
[ 0.325392] ACPI: EC: Look up EC in DSDT
[ 0.325392] ACPI: SSDT 00000000cfee7680 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
[ 0.325392] ACPI: Dynamic OEM Table Load:
[ 0.325392] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
[ 0.325392] ACPI: SSDT 00000000cfee7b40 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
[ 0.325392] ACPI: Dynamic OEM Table Load:
[ 0.325392] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
[ 0.325392] ACPI: Interpreter enabled
[ 0.325392] ACPI: (supports S0 S3 S4 S5)
[ 0.325392] ACPI: Using IOAPIC for interrupt routing
[ 0.331156] ACPI: No dock devices found.
[ 0.331158] HEST: Table not found.
[ 0.331160] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.331199] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.331276] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.331278] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.331280] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.331282] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.331283] pci_root PNP0A08:00: host bridge window [mem 0xcff00000-0xfebfffff]
[ 0.331292] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[ 0.331325] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
[ 0.331353] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.331355] pci 0000:00:01.0: PME# disabled
[ 0.331386] pci 0000:00:19.0: [8086:10c0] type 0 class 0x000200
[ 0.331400] pci 0000:00:19.0: reg 10: [mem 0xfdfc0000-0xfdfdffff]
[ 0.331407] pci 0000:00:19.0: reg 14: [mem 0xfdfff000-0xfdffffff]
[ 0.331413] pci 0000:00:19.0: reg 18: [io 0xff00-0xff1f]
[ 0.331462] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.331466] pci 0000:00:19.0: PME# disabled
[ 0.331480] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.331514] pci 0000:00:1a.0: reg 20: [io 0xfe00-0xfe1f]
[ 0.331554] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.331588] pci 0000:00:1a.1: reg 20: [io 0xfd00-0xfd1f]
[ 0.331629] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.331663] pci 0000:00:1a.2: reg 20: [io 0xfc00-0xfc1f]
[ 0.331707] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.331720] pci 0000:00:1a.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.331780] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.331783] pci 0000:00:1a.7: PME# disabled
[ 0.331798] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.331809] pci 0000:00:1b.0: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
[ 0.331862] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.331865] pci 0000:00:1b.0: PME# disabled
[ 0.331881] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.331915] pci 0000:00:1d.0: reg 20: [io 0xfb00-0xfb1f]
[ 0.331957] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.331991] pci 0000:00:1d.1: reg 20: [io 0xfa00-0xfa1f]
[ 0.332031] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.332065] pci 0000:00:1d.2: reg 20: [io 0xf900-0xf91f]
[ 0.332110] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.332123] pci 0000:00:1d.7: reg 10: [mem 0xfdffd000-0xfdffd3ff]
[ 0.332183] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.332186] pci 0000:00:1d.7: PME# disabled
[ 0.332198] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.332247] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
[ 0.332315] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[ 0.332318] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
[ 0.332356] pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101
[ 0.332368] pci 0000:00:1f.2: reg 10: [io 0xf800-0xf807]
[ 0.332374] pci 0000:00:1f.2: reg 14: [io 0xf700-0xf703]
[ 0.332380] pci 0000:00:1f.2: reg 18: [io 0xf600-0xf607]
[ 0.332386] pci 0000:00:1f.2: reg 1c: [io 0xf500-0xf503]
[ 0.332392] pci 0000:00:1f.2: reg 20: [io 0xf400-0xf40f]
[ 0.332398] pci 0000:00:1f.2: reg 24: [io 0xf300-0xf30f]
[ 0.332434] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.332446] pci 0000:00:1f.3: reg 10: [mem 0xfdffc000-0xfdffc0ff 64bit]
[ 0.332462] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.332488] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
[ 0.332500] pci 0000:00:1f.5: reg 10: [io 0xf100-0xf107]
[ 0.332506] pci 0000:00:1f.5: reg 14: [io 0xf000-0xf003]
[ 0.332512] pci 0000:00:1f.5: reg 18: [io 0xef00-0xef07]
[ 0.332518] pci 0000:00:1f.5: reg 1c: [io 0xee00-0xee03]
[ 0.332524] pci 0000:00:1f.5: reg 20: [io 0xed00-0xed0f]
[ 0.332531] pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f]
[ 0.332588] pci 0000:01:00.0: [1002:68d8] type 0 class 0x000300
[ 0.332598] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.332606] pci 0000:01:00.0: reg 18: [mem 0xfddc0000-0xfdddffff 64bit]
[ 0.332612] pci 0000:01:00.0: reg 20: [io 0xce00-0xceff]
[ 0.332622] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.332646] pci 0000:01:00.0: supports D1 D2
[ 0.332661] pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403
[ 0.332671] pci 0000:01:00.1: reg 10: [mem 0xfddfc000-0xfddfffff 64bit]
[ 0.332715] pci 0000:01:00.1: supports D1 D2
[ 0.332739] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.332741] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.332744] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.332747] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.332773] pci 0000:02:00.0: [8086:107c] type 0 class 0x000200
[ 0.332790] pci 0000:02:00.0: reg 10: [mem 0xfdce0000-0xfdcfffff]
[ 0.332798] pci 0000:02:00.0: reg 14: [mem 0xfdcc0000-0xfdcdffff]
[ 0.332806] pci 0000:02:00.0: reg 18: [io 0xdf00-0xdf3f]
[ 0.332835] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.332866] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.332870] pci 0000:02:00.0: PME# disabled
[ 0.332908] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.332911] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.332914] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.332918] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.332920] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.332922] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.332924] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.332926] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.332928] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
[ 0.332936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.333005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.333057] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.333059] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.333060] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.338616] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.338649] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 0.338682] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.338714] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.338746] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.338777] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.338809] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.338841] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.338905] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.338908] vgaarb: loaded
[ 0.338909] vgaarb: bridge control possible 0000:01:00.0
[ 0.338951] PCI: Using ACPI for IRQ routing
[ 0.343725] PCI: pci_cache_line_size set to 64 bytes
[ 0.343777] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.343779] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
[ 0.343870] NetLabel: Initializing
[ 0.343872] NetLabel: domain hash size = 128
[ 0.343873] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.343883] NetLabel: unlabeled traffic allowed by default
[ 0.343887] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.343891] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.343894] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.350015] Switching to clocksource hpet
[ 0.354598] AppArmor: AppArmor Filesystem Enabled
[ 0.354616] pnp: PnP ACPI init
[ 0.354626] ACPI: bus type pnp registered
[ 0.354686] pnp 00:00: [bus 00-ff]
[ 0.354688] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.354690] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.354691] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.354693] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.354694] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.354696] pnp 00:00: [mem 0xcff00000-0xfebfffff window]
[ 0.354731] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.354769] pnp 00:01: [io 0x0010-0x001f]
[ 0.354771] pnp 00:01: [io 0x0022-0x003f]
[ 0.354772] pnp 00:01: [io 0x0044-0x005f]
[ 0.354773] pnp 00:01: [io 0x0060]
[ 0.354775] pnp 00:01: [io 0x0064]
[ 0.354776] pnp 00:01: [io 0x0062-0x0063]
[ 0.354777] pnp 00:01: [io 0x0065-0x006f]
[ 0.354778] pnp 00:01: [io 0x0074-0x007f]
[ 0.354780] pnp 00:01: [io 0x0091-0x0093]
[ 0.354781] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.354782] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.354784] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.354785] pnp 00:01: [io 0x0800-0x087f]
[ 0.354786] pnp 00:01: [io 0x0290-0x0297]
[ 0.354788] pnp 00:01: [io 0x0880-0x088f]
[ 0.354831] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.354833] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.354835] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.354837] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.354839] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.354847] pnp 00:02: [dma 4]
[ 0.354848] pnp 00:02: [io 0x0000-0x000f]
[ 0.354850] pnp 00:02: [io 0x0080-0x0090]
[ 0.354851] pnp 00:02: [io 0x0094-0x009f]
[ 0.354852] pnp 00:02: [io 0x00c0-0x00df]
[ 0.354870] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.354904] pnp 00:03: [irq 0 disabled]
[ 0.354911] pnp 00:03: [irq 8]
[ 0.354912] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.354931] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.354949] pnp 00:04: [io 0x0070-0x0073]
[ 0.354969] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.354975] pnp 00:05: [io 0x0061]
[ 0.354993] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.354999] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.355003] pnp 00:06: [irq 13]
[ 0.355022] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.355123] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.355124] pnp 00:07: [io 0x03f7]
[ 0.355128] pnp 00:07: [irq 6]
[ 0.355130] pnp 00:07: [dma 2]
[ 0.355157] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.355195] pnp 00:08: [io 0x0400-0x04bf]
[ 0.355225] system 00:08: [io 0x0400-0x04bf] has been reserved
[ 0.355227] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.355239] pnp 00:09: [mem 0xffb80000-0xffbfffff]
[ 0.355261] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.355378] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.355414] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.355417] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.355459] pnp 00:0b: [mem 0x000f0000-0x000fffff]
[ 0.355461] pnp 00:0b: [mem 0xcff00000-0xcfffffff]
[ 0.355462] pnp 00:0b: [mem 0xfed00000-0xfed000ff]
[ 0.355463] pnp 00:0b: [mem 0xcfe90000-0xcfefffff]
[ 0.355465] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.355466] pnp 00:0b: [mem 0x00100000-0xcfe8ffff]
[ 0.355468] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.355469] pnp 00:0b: [mem 0xfed14000-0xfed1dfff]
[ 0.355470] pnp 00:0b: [mem 0xfed20000-0xfed9ffff]
[ 0.355472] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.355473] pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
[ 0.355474] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.355476] pnp 00:0b: [mem 0x000e0000-0x000effff]
[ 0.355518] system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.355520] system 00:0b: [mem 0xcff00000-0xcfffffff] has been reserved
[ 0.355522] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.355524] system 00:0b: [mem 0xcfe90000-0xcfefffff] could not be reserved
[ 0.355526] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.355528] system 00:0b: [mem 0x00100000-0xcfe8ffff] could not be reserved
[ 0.355530] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.355532] system 00:0b: [mem 0xfed14000-0xfed1dfff] has been reserved
[ 0.355534] system 00:0b: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.355536] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.355538] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.355540] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.355541] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[ 0.355544] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.355550] pnp: PnP ACPI: found 12 devices
[ 0.355551] ACPI: ACPI bus type pnp unregistered
[ 0.359835] Switched to NOHz mode on CPU #0
[ 0.359957] Switched to NOHz mode on CPU #1
[ 0.361243] PCI: max bus depth: 1 pci_try_num: 2
[ 0.361257] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[ 0.361260] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.361262] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.361264] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.361267] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.361270] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.361272] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.361274] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.361278] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.361281] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.361290] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.361294] pci 0000:00:01.0: setting latency timer to 64
[ 0.361298] pci 0000:00:1e.0: setting latency timer to 64
[ 0.361301] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.361303] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.361304] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.361306] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.361308] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.361310] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.361311] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.361313] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.361315] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.361316] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.361318] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.361320] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.361321] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.361323] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.361325] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.361326] pci_bus 0000:02: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.361382] NET: Registered protocol family 2
[ 0.361578] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.362545] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.365489] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.365885] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.365887] TCP reno registered
[ 0.365898] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.365957] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.366361] NET: Registered protocol family 1
[ 0.366389] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.366404] pci 0000:00:1a.0: PCI INT A disabled
[ 0.366416] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.366430] pci 0000:00:1a.1: PCI INT B disabled
[ 0.366437] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.366450] pci 0000:00:1a.2: PCI INT D disabled
[ 0.366458] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.366482] pci 0000:00:1a.7: PCI INT C disabled
[ 0.366491] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.366505] pci 0000:00:1d.0: PCI INT A disabled
[ 0.366510] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.366524] pci 0000:00:1d.1: PCI INT B disabled
[ 0.366529] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.366543] pci 0000:00:1d.2: PCI INT C disabled
[ 0.366550] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.366567] pci 0000:00:1d.7: PCI INT A disabled
[ 0.366580] pci 0000:01:00.0: Boot video device
[ 0.366585] PCI: CLS 64 bytes, default 64
[ 0.366632] Unpacking initramfs...
[ 0.454751] Freeing initrd memory: 5640k freed
[ 0.456212] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.456215] Placing 64MB software IO TLB between ffff8800cbe8a000 - ffff8800cfe8a000
[ 0.456217] software IO TLB at phys 0xcbe8a000 - 0xcfe8a000
[ 0.456534] audit: initializing netlink socket (disabled)
[ 0.456546] type=2000 audit(1365546653.450:1): initialized
[ 0.464589] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.466761] VFS: Disk quotas dquot_6.5.2
[ 0.466866] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.467034] msgmni has been set to 15999
[ 0.467211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.467240] io scheduler noop registered
[ 0.467241] io scheduler deadline registered (default)
[ 0.467278] io scheduler cfq registered
[ 0.467351] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.467374] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.467469] intel_idle: MWAIT substates: 0x22220
[ 0.467470] intel_idle: does not run on family 6 model 23
[ 0.467475] ERST: Table is not found!
[ 0.467514] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.910220] Linux agpgart interface v0.103
[ 0.910276] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.910607] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.910611] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.910655] mousedev: PS/2 mouse device common for all mice
[ 0.910685] rtc_cmos 00:04: RTC can wake from S4
[ 0.910758] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.910779] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.910786] cpuidle: using governor ladder
[ 0.910788] cpuidle: using governor menu
[ 0.910789] EFI Variables Facility v0.08 2004-May-17
[ 0.910954] TCP cubic registered
[ 0.911069] NET: Registered protocol family 10
[ 0.911546] NET: Registered protocol family 17
[ 0.911549] Registering the dns_resolver key type
[ 0.911619] PM: Hibernation image not present or could not be loaded.
[ 0.911633] registered taskstats version 1
[ 0.912247] Magic number: 9:475:552
[ 0.912270] pci_link PNP0C0F:03: hash matches
[ 0.912305] rtc_cmos 00:04: setting system clock to 2013-04-09 22:30:55 UTC (1365546655)
[ 0.912335] Initializing network drop monitor service
[ 0.913212] Freeing unused kernel memory: 744k freed
[ 0.913401] Write protecting the kernel read-only data: 8192k
[ 0.917371] Freeing unused kernel memory: 1844k freed
[ 0.919244] Freeing unused kernel memory: 656k freed
[ 0.924863] systemd-udevd[35]: starting version 200
[ 0.929217] [drm] Initialized drm 1.1.0 20060810
[ 0.935568] [drm] radeon defaulting to kernel modesetting.
[ 0.935570] [drm] radeon kernel modesetting enabled.
[ 0.935608] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.935612] radeon 0000:01:00.0: setting latency timer to 64
[ 0.935726] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68D8 0x174B:0xE151).
[ 0.935758] [drm] register mmio base: 0xFDDC0000
[ 0.935759] [drm] register mmio size: 131072
[ 0.935849] ATOM BIOS: REDWOOD
[ 0.935864] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 0.935866] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 0.937094] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 0.937097] [drm] RAM width 128bits DDR
[ 0.937161] [TTM] Zone kernel: Available graphics memory: 4097430 kiB.
[ 0.937162] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 0.937164] [TTM] Initializing pool allocator.
[ 0.937201] [drm] radeon: 1024M of VRAM memory ready
[ 0.937203] [drm] radeon: 512M of GTT memory ready.
[ 0.937217] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.937218] [drm] Driver supports precise vblank timestamp query.
[ 0.937250] radeon 0000:01:00.0: irq 41 for MSI/MSI-X
[ 0.937254] radeon 0000:01:00.0: radeon: using MSI.
[ 0.937281] [drm] radeon: irq initialized.
[ 0.937286] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 0.937772] [drm] Loading REDWOOD Microcode
[ 1.460015] Refined TSC clocksource calibration: 2992.499 MHz.
[ 1.460020] Switching to clocksource tsc
[ 61.120047] r600_cp: Failed to load firmware "radeon/REDWOOD_pfp.bin"
[ 61.120083] [drm:evergreen_startup] *ERROR* Failed to load firmware!
[ 61.120121] radeon 0000:01:00.0: disabling GPU acceleration
[ 61.121175] radeon 0000:01:00.0: ffff880220c5c000 unpin not necessary
[ 61.121177] radeon 0000:01:00.0: ffff880220c5c000 unpin not necessary
[ 61.121191] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 61.122829] [drm] Radeon Display Connectors
[ 61.122830] [drm] Connector 0:
[ 61.122831] [drm] DisplayPort
[ 61.122832] [drm] HPD4
[ 61.122834] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 61.122835] [drm] Encoders:
[ 61.122836] [drm] DFP1: INTERNAL_UNIPHY2
[ 61.122838] [drm] Connector 1:
[ 61.122838] [drm] HDMI-A
[ 61.122839] [drm] HPD5
[ 61.122841] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 61.122842] [drm] Encoders:
[ 61.122843] [drm] DFP2: INTERNAL_UNIPHY2
[ 61.122844] [drm] Connector 2:
[ 61.122845] [drm] DVI-I
[ 61.122846] [drm] HPD1
[ 61.122847] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 61.122849] [drm] Encoders:
[ 61.122849] [drm] DFP3: INTERNAL_UNIPHY1
[ 61.122851] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 62.320028] [drm] Radeon display connector DP-1: No monitor connected or invalid EDID
[ 62.371931] [drm] Radeon display connector HDMI-A-1: Found valid EDID
[ 62.423833] [drm] Radeon display connector DVI-I-1: Found valid EDID
[ 62.423849] [drm] Internal thermal controller with fan control
[ 62.423880] [drm] radeon: power management initialized
[ 62.628633] [drm] fb mappable at 0xD0040000
[ 62.628634] [drm] vram apper at 0xD0000000
[ 62.628635] [drm] size 8294400
[ 62.628636] [drm] fb depth is 24
[ 62.628637] [drm] pitch is 7680
[ 62.628675] fbcon: radeondrmfb (fb0) is primary device
[ 62.924892] Console: switching to colour frame buffer device 240x67
[ 62.928774] fb0: radeondrmfb frame buffer device
[ 62.928775] drm: registered panic notifier
[ 62.928779] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0
[ 62.929721] device-mapper: uevent: version 1.0.3
[ 62.929802] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[ 62.951388] usbcore: registered new interface driver usbfs
[ 62.951408] usbcore: registered new interface driver hub
[ 62.951860] usbcore: registered new device driver usb
[ 62.952716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 62.952738] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 62.952760] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 62.952762] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 62.952781] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 62.956678] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 62.956692] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
[ 62.964173] SCSI subsystem initialized
[ 62.966530] FDC 0 is a post-1991 82077
[ 62.966568] libata version 3.00 loaded.
[ 62.980013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 62.980149] hub 1-0:1.0: USB hub found
[ 62.980153] hub 1-0:1.0: 6 ports detected
[ 62.980221] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 62.980241] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 62.980243] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 62.980251] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 62.984146] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 62.984160] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
[ 63.000008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 63.000119] hub 2-0:1.0: USB hub found
[ 63.000122] hub 2-0:1.0: 6 ports detected
[ 63.000275] ata_piix 0000:00:1f.2: version 2.13
[ 63.000283] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 63.000286] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 63.000312] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 63.000621] scsi0 : ata_piix
[ 63.000680] scsi1 : ata_piix
[ 63.000997] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[ 63.001001] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[ 63.001013] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 63.001016] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 63.001039] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 63.001372] scsi2 : ata_piix
[ 63.001546] scsi3 : ata_piix
[ 63.001687] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
[ 63.001690] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
[ 63.030264] uhci_hcd: USB Universal Host Controller Interface driver
[ 63.030424] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 63.030430] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 63.030432] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 63.030438] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 63.030465] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
[ 63.030564] hub 3-0:1.0: USB hub found
[ 63.030567] hub 3-0:1.0: 2 ports detected
[ 63.030617] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 63.030622] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 63.030624] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 63.030631] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 63.030658] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
[ 63.030993] hub 4-0:1.0: USB hub found
[ 63.030996] hub 4-0:1.0: 2 ports detected
[ 63.031041] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 63.031046] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 63.031049] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 63.031054] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 63.031073] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
[ 63.031176] hub 5-0:1.0: USB hub found
[ 63.031179] hub 5-0:1.0: 2 ports detected
[ 63.031221] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 63.031225] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 63.031228] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 63.031233] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 63.031252] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
[ 63.031335] hub 6-0:1.0: USB hub found
[ 63.031338] hub 6-0:1.0: 2 ports detected
[ 63.031391] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 63.031396] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 63.031399] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 63.031403] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 63.031423] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
[ 63.031507] hub 7-0:1.0: USB hub found
[ 63.031510] hub 7-0:1.0: 2 ports detected
[ 63.031554] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 63.031559] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 63.031561] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 63.031567] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 63.031586] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
[ 63.031670] hub 8-0:1.0: USB hub found
[ 63.031673] hub 8-0:1.0: 2 ports detected
[ 63.360617] ata3: SATA link down (SStatus 0 SControl 300)
[ 63.371236] ata4: SATA link down (SStatus 0 SControl 300)
[ 63.480010] usb 1-5: new high speed USB device number 4 using ehci_hcd
[ 63.631903] hub 1-5:1.0: USB hub found
[ 63.632248] hub 1-5:1.0: 4 ports detected
[ 63.750013] usb 1-6: new high speed USB device number 5 using ehci_hcd
[ 63.870059] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 63.870069] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 63.870191] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 63.870202] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 63.870210] ata2.01: link offline, clearing class 3 to NONE
[ 63.890185] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN04, max UDMA/100
[ 63.903235] ata1.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 63.903238] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 63.930119] ata2.00: configured for UDMA/100
[ 63.940457] ata1.00: configured for UDMA/133
[ 63.940539] scsi 0:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 63.943994] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN04 PQ: 0 ANSI: 5
[ 63.946116] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 63.946150] sd 0:0:0:0: [sda] Write Protect is off
[ 63.946152] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 63.946167] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 63.954097] sda: sda1 sda2 sda3
[ 63.954299] sd 0:0:0:0: [sda] Attached SCSI disk
[ 63.963411] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 63.963414] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 63.963518] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 64.360012] usb 2-5: new high speed USB device number 3 using ehci_hcd
[ 64.565540] Initializing USB Mass Storage driver...
[ 64.565618] scsi4 : usb-storage 2-5:1.0
[ 64.565663] usbcore: registered new interface driver usb-storage
[ 64.565664] USB Mass Storage support registered.
[ 64.840010] usb 4-1: new full speed USB device number 2 using uhci_hcd
[ 65.026702] hub 4-1:1.0: USB hub found
[ 65.027689] hub 4-1:1.0: 3 ports detected
[ 65.310009] usb 4-2: new low speed USB device number 3 using uhci_hcd
[ 65.499874] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input0
[ 65.499920] generic-usb 0003:0461:4D15.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-2/input0
[ 65.499929] usbcore: registered new interface driver usbhid
[ 65.499930] usbhid: USB HID core driver
[ 65.570232] scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.08 PQ: 0 ANSI: 0
[ 65.577604] scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.08 PQ: 0 ANSI: 0
[ 65.589979] scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.08 PQ: 0 ANSI: 0
[ 65.597478] scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.08 PQ: 0 ANSI: 0
[ 65.636345] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 65.675345] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 65.691970] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 65.700220] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 65.760011] usb 7-2: new full speed USB device number 2 using uhci_hcd
[ 66.050378] usb 1-5.1: new high speed USB device number 6 using ehci_hcd
[ 66.161907] hub 1-5.1:1.0: USB hub found
[ 66.162251] hub 1-5.1:1.0: 4 ports detected
[ 66.241689] usb 4-1.1: new full speed USB device number 4 using uhci_hcd
[ 66.390902] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.1/4-1.1:1.0/input/input1
[ 66.390933] generic-usb 0003:413C:2010.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.1-1.1/input0
[ 66.397751] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.1/4-1.1:1.1/input/input2
[ 66.397794] generic-usb 0003:413C:2010.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1a.1-1.1/input1
[ 121.430130] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 123.970098] systemd[1]: systemd 200 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 123.998806] systemd[1]: Set hostname to <530-Arch>.
[ 124.769151] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 124.769197] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 124.769210] systemd[1]: Starting Remote File System Setup.
[ 124.769292] systemd[1]: Reached target Remote File System Setup.
[ 124.769300] systemd[1]: Starting Syslog Socket.
[ 124.769374] systemd[1]: Listening on Syslog Socket.
[ 124.769383] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 124.769452] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 124.769460] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 124.769532] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 124.769539] systemd[1]: Starting Delayed Shutdown Socket.
[ 124.769605] systemd[1]: Listening on Delayed Shutdown Socket.
[ 124.769612] systemd[1]: Starting LVM2 metadata daemon socket.
[ 124.769681] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 124.769688] systemd[1]: Starting Encrypted Volumes.
[ 124.769742] systemd[1]: Reached target Encrypted Volumes.
[ 124.769789] systemd[1]: Starting udev Kernel Socket.
[ 124.769854] systemd[1]: Listening on udev Kernel Socket.
[ 124.769891] systemd[1]: Starting udev Control Socket.
[ 124.769957] systemd[1]: Listening on udev Control Socket.
[ 124.769969] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 124.769999] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 124.770015] systemd[1]: Starting Paths.
[ 124.770067] systemd[1]: Reached target Paths.
[ 124.770090] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 124.770232] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 124.770240] systemd[1]: Starting Journal Socket.
[ 124.770320] systemd[1]: Listening on Journal Socket.
[ 124.770334] systemd[1]: Mounting POSIX Message Queue File System...
[ 124.879092] systemd[1]: Started Set Up Additional Binary Formats.
[ 124.879212] systemd[1]: Starting udev Kernel Device Manager...
[ 124.953513] systemd[1]: Starting Load Kernel Modules...
[ 124.990140] systemd-udevd[152]: starting version 200
[ 125.020148] systemd[1]: Starting udev Coldplug all Devices...
[ 125.080119] systemd[1]: Starting Journal Service...
[ 125.130194] systemd[1]: Started Journal Service.
[ 125.154128] systemd[1]: Starting Apply Kernel Variables...
[ 125.172193] vboxdrv: Found 2 processor cores.
[ 125.173262] vboxdrv: fAsync=0 offMin=0x252 offMax=0x1098
[ 125.173309] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 125.173311] vboxdrv: Successfully loaded version 4.2.10_OSE (interface 0x001a0004).
[ 125.210168] systemd[1]: Starting Setup Virtual Console...
[ 125.239943] vboxpci: IOMMU not found (not registered)
[ 125.280099] systemd[1]: Mounting Debug File System...
[ 125.360097] systemd[1]: Mounting Huge Pages File System...
[ 125.411749] fuse init (API version 7.16)
[ 125.430064] systemd[1]: Starting Swap.
[ 125.430138] systemd[1]: Reached target Swap.
[ 125.430167] systemd[1]: Started File System Check on Root Device.
[ 125.430178] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 125.490117] systemd[1]: Expecting device dev-sda1.device...
[ 125.490952] systemd[1]: Expecting device dev-system-home.device...
[ 125.492912] systemd[1]: Started udev Kernel Device Manager.
[ 125.493937] systemd[1]: Mounted POSIX Message Queue File System.
[ 125.504233] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 125.550960] systemd[1]: Started Load Kernel Modules.
[ 125.692260] ACPI: Fan [FAN] (on)
[ 125.692495] thermal LNXTHERM:00: registered as thermal_zone0
[ 125.692497] ACPI: Thermal Zone [THRM] (40 C)
[ 125.694631] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 125.694637] ACPI: Power Button [PWRB]
[ 125.695144] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 125.695147] ACPI: Power Button [PWRF]
[ 125.698756] ACPI: acpi_idle registered with cpuidle
[ 125.711049] systemd[1]: Started Apply Kernel Variables.
[ 125.791030] systemd[1]: Started Setup Virtual Console.
[ 125.792132] systemd[1]: Mounted Debug File System.
[ 125.793196] systemd[1]: Mounted Huge Pages File System.
[ 125.823181] iTCO_vendor_support: vendor-support=0
[ 125.832326] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 125.832413] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
[ 125.832465] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 125.861014] systemd[1]: Started Remount Root and Kernel File Systems.
[ 125.925415] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 125.931016] systemd[1]: Started udev Coldplug all Devices.
[ 125.931053] systemd[1]: Starting Load Random Seed...
[ 125.972288] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 125.974253] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 125.974255] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 125.974275] e1000 0000:02:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 126.010143] systemd[1]: Mounting FUSE Control File System...
[ 126.248928] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 126.294564] Linux media interface: v0.10
[ 126.300084] systemd[1]: Mounted Configuration File System.
[ 126.300106] systemd[1]: Starting Local File Systems (Pre).
[ 126.301223] systemd[1]: Reached target Local File Systems (Pre).
[ 126.301236] systemd[1]: Mounting /tmp...
[ 126.377775] Linux video capture interface: v2.00
[ 126.432046] systemd[1]: Mounted FUSE Control File System.
[ 126.462280] e1000 0000:02:00.0: eth0: (PCI:33MHz:32-bit) 00:0e:0c:d0:a9:e7
[ 126.462285] e1000 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 126.500227] systemd-udevd[164]: renamed network interface eth0 to enp2s0
[ 126.501038] systemd[1]: Started Load Random Seed.
[ 126.502216] systemd[1]: Mounted /tmp.
[ 126.506786] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 126.506833] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 126.506848] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 126.531938] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0809)
[ 126.565629] input: UVC Camera (046d:0809) as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input6
[ 126.565690] usbcore: registered new interface driver uvcvideo
[ 126.565692] USB Video Class driver (v1.1.0)
[ 126.590651] systemd[1]: Starting LVM2 metadata daemon...
[ 126.616253] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 126.619198] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 126.619298] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 126.619341] HDA Intel 0000:01:00.1: irq 42 for MSI/MSI-X
[ 126.619358] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 126.656242] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 126.656451] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9
[ 126.752008] systemd[1]: Started LVM2 metadata daemon.
[ 126.852107] systemd[1]: Found device WDC_WD1002FAEX-00Z3A0.
[ 126.852132] systemd[1]: Starting File System Check on /dev/sda1...
[ 126.968131] systemd[1]: Starting Sound Card.
[ 126.969099] systemd[1]: Reached target Sound Card.
[ 127.068309] usbcore: registered new interface driver snd-usb-audio
[ 127.090039] set resolution quirk: cval->res = 384
[ 127.191068] systemd[1]: Started File System Check on /dev/sda1.
[ 127.191108] systemd[1]: Mounting /boot...
[ 127.342463] systemd[1]: Found device /dev/system/home.
[ 127.342487] systemd[1]: Starting File System Check on /dev/system/home...
[ 127.345862] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 127.347400] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 127.402015] systemd[1]: Mounted /boot.
[ 127.571070] systemd[1]: Started File System Check on /dev/system/home.
[ 127.571107] systemd[1]: Mounting /home...
[ 127.733803] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 127.735071] systemd[1]: Mounted /home.
[ 127.735105] systemd[1]: Mounting /home/user/Temp...
[ 127.941264] systemd[1]: Mounted /home/user/Temp.
[ 127.941290] systemd[1]: Starting Local File Systems.
[ 127.942288] systemd[1]: Reached target Local File Systems.
[ 127.942344] systemd[1]: Starting Recreate Volatile Files and Directories...
[ 128.511113] systemd[1]: Started Recreate Volatile Files and Directories.
[ 128.511164] systemd[1]: Starting System Initialization.
[ 128.512200] systemd[1]: Reached target System Initialization.
[ 128.512212] systemd[1]: Starting D-Bus System Message Bus Socket.
[ 128.513265] systemd[1]: Listening on D-Bus System Message Bus Socket.
[ 128.513275] systemd[1]: Starting Sockets.
[ 128.514300] systemd[1]: Reached target Sockets.
[ 128.514311] systemd[1]: Starting Daily Cleanup of Temporary Directories.
[ 128.514326] systemd[1]: Started Daily Cleanup of Temporary Directories.
[ 128.514335] systemd[1]: Starting Timers.
[ 128.515358] systemd[1]: Reached target Timers.
[ 128.515366] systemd[1]: Starting Restore Sound Card State...
[ 128.590137] systemd[1]: Starting Basic System.
[ 128.591286] systemd[1]: Reached target Basic System.
[ 128.591300] systemd[1]: Starting System Logger Daemon...
[ 128.651171] systemd[1]: Started System Logger Daemon.
[ 128.651191] systemd[1]: Starting powersave level for Radeon driver...
[ 128.720168] systemd[1]: Started SSH Key Generation.
[ 128.720202] systemd[1]: Starting OpenSSH Daemon...
[ 128.801180] systemd[1]: Started OpenSSH Daemon.
[ 128.801207] systemd[1]: Starting Periodic Command Scheduler...
[ 128.861133] systemd[1]: Started Periodic Command Scheduler.
[ 128.861157] systemd[1]: Starting Apparmor...
[ 128.921385] systemd[1]: Started Apparmor.
[ 128.921416] systemd[1]: Starting Netcfg multi-profile daemon...
[ 128.980152] systemd[1]: Starting Packet Filtering Framework...
[ 129.040127] systemd[1]: Starting Xbox 360 Controller Driver...
[ 129.042976] ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 129.121301] systemd[1]: Started Xbox 360 Controller Driver.
[ 129.121333] systemd[1]: Starting Login Service...
[ 129.150621] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 129.190111] systemd[1]: Starting D-Bus System Message Bus...
[ 129.204645] type=1400 audit(1365546783.767:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/managesieve-login" pid=367 comm="apparmor_parser"
[ 129.210909] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 129.271230] systemd[1]: Started D-Bus System Message Bus.
[ 129.291825] e1000: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 129.292656] ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 129.314331] input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input10
[ 129.368509] type=1400 audit(1365546783.927:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dnsmasq" pid=367 comm="apparmor_parser"
[ 129.381085] systemd[1]: Started Restore Sound Card State.
[ 129.471059] systemd[1]: Started powersave level for Radeon driver.
[ 129.591095] systemd[1]: Started Netcfg multi-profile daemon.
[ 129.691085] systemd[1]: Started Packet Filtering Framework.
[ 129.691122] systemd[1]: Starting Network.
[ 129.692143] systemd[1]: Reached target Network.
[ 129.692153] systemd[1]: Starting Anonymizing Overlay Network...
[ 129.770137] systemd[1]: Starting Network Time Service...
[ 129.851368] systemd[1]: Mounting /home/user/NetworkShare...
[ 129.886172] type=1400 audit(1365546784.447:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=367 comm="apparmor_parser"
[ 129.886251] type=1400 audit(1365546784.447:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=367 comm="apparmor_parser"
[ 129.886306] type=1400 audit(1365546784.447:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=367 comm="apparmor_parser"
[ 129.886417] type=1400 audit(1365546784.447:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=367 comm="apparmor_parser"
[ 129.991051] FS-Cache: Loaded
[ 130.059005] FS-Cache: Netfs 'cifs' registered for caching
[ 130.380110] e1000: enp2s0 NIC Link is Down
[ 130.449417] type=1400 audit(1365546785.007:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/chromium/chromium" pid=367 comm="apparmor_parser"
[ 130.600105] type=1400 audit(1365546785.167:9): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=367 comm="apparmor_parser"
[ 130.738201] type=1400 audit(1365546785.297:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/avahi-daemon" pid=367 comm="apparmor_parser"
[ 130.946524] type=1400 audit(1365546785.507:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/pop3-login" pid=367 comm="apparmor_parser"
[ 132.681822] e1000: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 133.770110] e1000: enp2s0 NIC Link is Down
[ 134.715491] audit_printk_skb: 63 callbacks suppressed
[ 134.715494] type=1400 audit(1365546789.277:33): apparmor="STATUS" operation="profile_load" name="/usr/lib/firefox{,-[0-9]*}/firefox{,*[^s][^h]}" pid=367 comm="apparmor_parser"
[ 134.833922] type=1400 audit(1365546789.397:34): apparmor="STATUS" operation="profile_load" name="/usr/sbin/identd" pid=367 comm="apparmor_parser"
[ 136.131828] e1000: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 137.230119] e1000: enp2s0 NIC Link is Down
[ 138.190024] CIFS VFS: Error connecting to socket. Aborting operation
[ 138.240053] CIFS VFS: cifs_mount failed w/return code = -115
[ 139.531821] e1000: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 139.950006] enp2s0: no IPv6 routers present
[ 146.452046] EXT4-fs (dm-1): re-mounted. Opts: commit=0
[ 146.834045] EXT4-fs (dm-2): re-mounted. Opts: commit=0
./usr/lib/firmware/radeon/REDWOOD_pfp.bin is present within the initramfs file, so I'm not quite sure why it cannot find it (lsinitcpio /boot/initramfs-linux-lts.img):
./VERSION
./buildconfig
./config
./shutdown
./hooks
./hooks/shutdown
./hooks/lvm2
./hooks/encrypt
./hooks/udev
./init
./init_functions
./lib64
./sbin
./bin
./lib
./usr
./usr/lib64
./usr/sbin
./usr/bin
./usr/bin/findmnt
./usr/bin/lsblk
./usr/bin/cp
./usr/bin/fsck
./usr/bin/fsck.ext3
./usr/bin/fsck.ext2
./usr/bin/fsck.ext4
./usr/bin/dmsetup
./usr/bin/lvmetad
./usr/bin/lvm
./usr/bin/cryptsetup
./usr/bin/udevadm
./usr/bin/udevd
./usr/bin/switch_root
./usr/bin/mount
./usr/bin/blkid
./usr/bin/modinfo
./usr/bin/modprobe
./usr/bin/lsmod
./usr/bin/rmmod
./usr/bin/insmod
./usr/bin/depmod
./usr/bin/kmod
./usr/bin/yes
./usr/bin/wget
./usr/bin/wc
./usr/bin/vi
./usr/bin/uptime
./usr/bin/uniq
./usr/bin/uname
./usr/bin/umount
./usr/bin/true
./usr/bin/touch
./usr/bin/tftp
./usr/bin/test
./usr/bin/telnet
./usr/bin/tail
./usr/bin/tac
./usr/bin/strings
./usr/bin/stat
./usr/bin/sort
./usr/bin/sleep
./usr/bin/sha512sum
./usr/bin/sha256sum
./usr/bin/sha1sum
./usr/bin/sh
./usr/bin/setfont
./usr/bin/seq
./usr/bin/sed
./usr/bin/route
./usr/bin/rmdir
./usr/bin/rm
./usr/bin/reboot
./usr/bin/readlink
./usr/bin/pwd
./usr/bin/ps
./usr/bin/printf
./usr/bin/poweroff
./usr/bin/ping6
./usr/bin/ping
./usr/bin/pidof
./usr/bin/pgrep
./usr/bin/openvt
./usr/bin/nslookup
./usr/bin/netstat
./usr/bin/nc
./usr/bin/mv
./usr/bin/mktemp
./usr/bin/mknod
./usr/bin/mkfifo
./usr/bin/mkdir
./usr/bin/md5sum
./usr/bin/ls
./usr/bin/losetup
./usr/bin/loadkmap
./usr/bin/loadfont
./usr/bin/ln
./usr/bin/less
./usr/bin/killall
./usr/bin/kill
./usr/bin/kbd_mode
./usr/bin/iptunnel
./usr/bin/iprule
./usr/bin/iproute
./usr/bin/iplink
./usr/bin/ipaddr
./usr/bin/ip
./usr/bin/install
./usr/bin/init
./usr/bin/ifconfig
./usr/bin/hexdump
./usr/bin/head
./usr/bin/halt
./usr/bin/grep
./usr/bin/getopt
./usr/bin/free
./usr/bin/false
./usr/bin/expr
./usr/bin/env
./usr/bin/egrep
./usr/bin/echo
./usr/bin/du
./usr/bin/dmesg
./usr/bin/dirname
./usr/bin/df
./usr/bin/dd
./usr/bin/cut
./usr/bin/cttyhack
./usr/bin/clear
./usr/bin/chroot
./usr/bin/chown
./usr/bin/chmod
./usr/bin/chgrp
./usr/bin/cat
./usr/bin/basename
./usr/bin/awk
./usr/bin/ash
./usr/bin/[[
./usr/bin/[
./usr/bin/busybox
./usr/lib
./usr/lib/firmware
./usr/lib/firmware/radeon
./usr/lib/firmware/radeon/BARTS_pfp.bin
./usr/lib/firmware/radeon/BARTS_me.bin
./usr/lib/firmware/radeon/BARTS_mc.bin
./usr/lib/firmware/radeon/BTC_rlc.bin
./usr/lib/firmware/radeon/TURKS_pfp.bin
./usr/lib/firmware/radeon/TURKS_me.bin
./usr/lib/firmware/radeon/TURKS_mc.bin
./usr/lib/firmware/radeon/CAICOS_pfp.bin
./usr/lib/firmware/radeon/CAICOS_me.bin
./usr/lib/firmware/radeon/CAICOS_mc.bin
./usr/lib/firmware/radeon/CAYMAN_pfp.bin
./usr/lib/firmware/radeon/CAYMAN_me.bin
./usr/lib/firmware/radeon/CAYMAN_mc.bin
./usr/lib/firmware/radeon/CAYMAN_rlc.bin
./usr/lib/firmware/radeon/R600_pfp.bin
./usr/lib/firmware/radeon/R600_me.bin
./usr/lib/firmware/radeon/RV610_pfp.bin
./usr/lib/firmware/radeon/RV610_me.bin
./usr/lib/firmware/radeon/RV630_pfp.bin
./usr/lib/firmware/radeon/RV630_me.bin
./usr/lib/firmware/radeon/RV620_pfp.bin
./usr/lib/firmware/radeon/RV620_me.bin
./usr/lib/firmware/radeon/RV635_pfp.bin
./usr/lib/firmware/radeon/RV635_me.bin
./usr/lib/firmware/radeon/RV670_pfp.bin
./usr/lib/firmware/radeon/RV670_me.bin
./usr/lib/firmware/radeon/RS780_pfp.bin
./usr/lib/firmware/radeon/RS780_me.bin
./usr/lib/firmware/radeon/RV770_pfp.bin
./usr/lib/firmware/radeon/RV770_me.bin
./usr/lib/firmware/radeon/RV730_pfp.bin
./usr/lib/firmware/radeon/RV730_me.bin
./usr/lib/firmware/radeon/RV710_pfp.bin
./usr/lib/firmware/radeon/RV710_me.bin
./usr/lib/firmware/radeon/R600_rlc.bin
./usr/lib/firmware/radeon/R700_rlc.bin
./usr/lib/firmware/radeon/CEDAR_pfp.bin
./usr/lib/firmware/radeon/CEDAR_me.bin
./usr/lib/firmware/radeon/CEDAR_rlc.bin
./usr/lib/firmware/radeon/REDWOOD_pfp.bin
./usr/lib/firmware/radeon/REDWOOD_me.bin
./usr/lib/firmware/radeon/REDWOOD_rlc.bin
./usr/lib/firmware/radeon/JUNIPER_pfp.bin
./usr/lib/firmware/radeon/JUNIPER_me.bin
./usr/lib/firmware/radeon/JUNIPER_rlc.bin
./usr/lib/firmware/radeon/CYPRESS_pfp.bin
./usr/

This occurs with the 3.4 kernel as well, so whatever incompatibility was introduced was fixed in 3.5 or 3.6. I'm using 3.7.10 right now (since everything else seems to be broken in some way), and not experiencing this.

Intel KMS... Finaly useful

After the 2.6.31 kernel and xf86-video-intel 2.9 kms performance is finaly on par with performace of xf86-video-intel 2.7 with EXA on GEM kernel. And also the system is much more stable, no more hardlocks, it's intel's finaly done something 'bout those.
The only bad thing for now is that with KMS enabled lower resolutions (my native is 1280x800) that use different aspect ratio (for example 1024x768) stretch the screen, instead of using two sidelines of 133 pixels)
Anyone know how to fix that.
p.s. Finaly able to use kwin4 compositing, without receiving an immediate hardlock.

Well... I've been getting hardlocks and kernel panics quite frequently on my notebook... Tested with dell test system for sytem errors for several hours and nothing came up so I'm living with them...
I was getting a weekly kernel panic and 3 dayly hardlock, however no hardlocks since using KMS so that's why I said a step in the right direction xd

ATI display driver fails to work with new kernel

Hi,
I've just upgraded from
OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64
to most current
OEL kernel-2.6.18-194.11.4.0.1.el5.x86_64
and got the problem with ATI display driver. Whenever I perform kernel upgrade, I have to recompile vendor-provided ATI display driver downloadable from AMD/ATI site, because system ATI driver, provided by OEL/RHEL as kernel module, doesn't work properly (too slow). I did that hundred times and never had a problem. This time the problem is that after upgrading to new kernel and recompiling the existing ATI display driver (Revision 10.8), it doesn't work anymore, even though it worked perfectly with previous kernel. I cannot even start X11 (glibc problem reported with stack traces!!!). The newest ATI display driver (Revision 10.9) "works" with new kernel, but display is awfully slow making any serious work impossible. It is even slower than system-provided ATI driver.
I am pretty sure the problem is in new kernel. As I have no backup of old kernel files and couldn't download the previous OEL kernel files from ULN, neither binary nor source (the files do not exist on ULN anymore, only the recent kernel files), I downloaded the previous kernel source from ftp.redhat.com, compiled the kernel and downgraded to it, recompiled ATI display driver, and everything works properly and fast as before upgrading. I can remember that ULN site used to have all kernel versions prior to actual one and cannot understand why Oracle dropped this practice. As I have an ULN account, I certainly want to have OEL patched kernel.
My question is: does anybody know how and where I can download the previous OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64 binary rpm files or at least source rpm file?
Maybe Sergio or Tommy can help?
Thanks in advance.
NJ

I have experienced the same with Ubuntu some years ago - specific feature (hack?) that was implemented in the kernel was deprecated. This was used by the display driver for an onboard Intel graphics chipset. Beryl (which was subsequently merged with Compiz) turned into a horribly slow experience. As far as I recall, a subsequent kernel patch "fixed" things as a number of users were affected, of which many complained very loudly.
Anyway, I think the lesson here is that OEL is not really the correct distro to use for a desktop. A broken ATI driver for the OEL kernel? Does not really feature in the scheme of things for OEL support. Oracle Grid/RAC/Enterprise/Standard Edition do not care. Oracle's application servers (Apache, Weblogic, etc) do not care. Etc.
Sure, GUI desktop access to an OEL server is needed (like when running dbca or an installer) - but that can easily and effectively be done using vncserver for example and running twm.
You may be able to fix/work-around the problem with the current kernel update.. you may be able to roll back the update. But what about the next time when some other component does not work after a patch or an update? Surely it is a lot less stressful and frustrating to rather use a desktop distro, like Ubuntu, instead?

[solved] can't find/build mplayer with vdpau codec support

I want to install an mplayer that will handle vdpau.
I installed the standard mplayer version but that didn't have it.
Following some advice in another thread I rebuilt the standard mplayer with yaourt.
When I do 'mplayer -vo help' it shows a vdpau driver on the list. But when I do 'mplayer -vc help' there are no vdpau codecs listed.
I tried the same thing with mplayer-svn but get the same results.
I even tried compiling mplayer manually but get the same results.
What am I doing wrong?
TIA, gabu
(I have just moved to Archlinux64 after 3 years with Gentoo, so my Gentoo experience might be getting in the way)
Last edited by gabu (2009-08-10 18:59:50)

xstaticxgpx:
Yes, you are right. This is what I get:
sh-4.0$ mplayer -vo help
MPlayer SVN-r29411-4.4.1 (C) 2000-2009 MPlayer Team
Available video output drivers:
ID_VIDEO_OUTPUTS
vdpau VDPAU with X11
xv X11/Xv
x11 X11 ( XImage/Shm )
xover General X11 driver for overlay capable video output drivers
gl X11 (OpenGL)
gl2 X11 (OpenGL) - multiple textures version
dga DGA ( Direct Graphic Access V2.0 )
sdl SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!)
fbdev Framebuffer Device
fbdev2 Framebuffer Device
aa AAlib
caca libcaca
v4l2 V4L2 MPEG Video Decoder Output
xvidix X11 (VIDIX)
cvidix console VIDIX
null Null video output
mpegpes MPEG-PES to DVB card
yuv4mpeg yuv4mpeg output for mjpegtools
png PNG file
jpeg JPEG file
gif89a animated GIF output
tga Targa output
pnm PPM/PGM/PGMYUV file
md5sum md5sum of each frame
129 audio & 258 video codecs
ID_EXIT=NONE
sh-4.0$ mplayer -vc help
MPlayer SVN-r29411-4.4.1 (C) 2000-2009 MPlayer Team
129 audio & 258 video codecs
Available video codecs:
ID_VIDEO_CODECS
vc: vfm: status: info: [lib/dll]
coreserve dshowserver working CoreAVC DShow H264 decoder 1.8 for x86 - http://corecodec.org/ [CoreAVCDecoder.ax]
ffmvi1 ffmpeg working FFmpeg Motion Pixels Decoder [motionpixels]
ffmdec ffmpeg working FFmpeg Sony PlayStation MDEC (Motion DECoder) [mdec]
ffsiff ffmpeg working FFmpeg Beam Software SIFF decoder [vb]
ffmimic ffmpeg working FFmpeg Mimic video [mimic]
ffkmvc ffmpeg working FFmpeg Karl Morton Video Codec [kmvc]
ffzmbv ffmpeg working FFmpeg Zip Motion-Block Video [zmbv]
zmbv vfw working Zip Motion-Block Video [zmbv.dll]
mpegpes mpegpes working MPEG-PES output (.mpg or DXR3/IVTV/DVB/V4L2 card)
ffmpeg1 ffmpeg working FFmpeg MPEG-1 [mpeg1video]
ffmpeg2 ffmpeg working FFmpeg MPEG-2 [mpeg2video]
ffmpeg12 ffmpeg working FFmpeg MPEG-1/2 [mpegvideo]
mpeg12 libmpeg2 working MPEG-1 or 2 (libmpeg2)
ffmpeg12mc ffmpeg problems FFmpeg MPEG-1/2 (XvMC) [mpegvideo_xvmc]
ffnuv ffmpeg working NuppelVideo [nuv]
nuv nuv working NuppelVideo
ffbmp ffmpeg working FFmpeg BMP decoder [bmp]
ffgif ffmpeg working FFmpeg GIF decoder [gif]
fftiff ffmpeg working FFmpeg TIFF decoder [tiff]
ffpcx ffmpeg working FFmpeg PCX decoder [pcx]
ffpng ffmpeg working FFmpeg PNG decoder [png]
mpng mpng working PNG image decoder [libpng]
ffptx ffmpeg working FFmpeg V.Flash PTX decoder [ptx]
fftga ffmpeg untested FFmpeg TGA decoder [targa]
mtga mtga working TGA image decoder
sgi sgi working SGI image decoder
ffsunras ffmpeg working FFmpeg SUN Rasterfile decoder [sunrast]
ffindeo3 ffmpeg working FFmpeg Intel Indeo 3.1/3.2 [indeo3]
fffli ffmpeg working Autodesk FLI/FLC Animation [flic]
ffaasc ffmpeg working Autodesk RLE decoder [aasc]
ffloco ffmpeg working LOCO video decoder [loco]
ffqtrle ffmpeg working QuickTime Animation (RLE) [qtrle]
ffrpza ffmpeg working QuickTime Apple Video [rpza]
ffsmc ffmpeg working Apple Graphics (SMC) codec [smc]
ff8bps ffmpeg working Planar RGB (Photoshop) [8bps]
ffcyuv ffmpeg working Creative YUV (libavcodec) [cyuv]
ffmsrle ffmpeg working Microsoft RLE [msrle]
ffroqvideo ffmpeg working Id RoQ File Video Decoder [roqvideo]
lzo lzo working LZO compressed [liblzo]
theora theora working Theora (free, reworked VP3) [libtheora]
msuscls vfw working MSU Screen Capture Lossless Codec [SCLS.DLL]
cram vfw problems Microsoft Video 1 [msvidc32.dll]
ffcvid ffmpeg working Cinepak Video (native codec) [cinepak]
cvidvfw vfw working Cinepak Video [iccvid.dll]
huffyuv vfw problems HuffYUV [huffyuv.dll]
ffvideo1 ffmpeg working Microsoft Video 1 (native codec) [msvideo1]
ffmszh ffmpeg working AVImszh (native codec) [mszh]
ffzlib ffmpeg working AVIzlib (native codec) [zlib]
cvidxa xanim problems XAnim's Radius Cinepak Video [vid_cvid.xa]
ffhuffyuv ffmpeg working FFmpeg HuffYUV [huffyuv]
ffv1 ffmpeg working FFV1 (lossless codec) [ffv1]
ffsnow ffmpeg working FFSNOW (Michael's wavelet codec) [snow]
ffasv1 ffmpeg working FFmpeg ASUS V1 [asv1]
ffasv2 ffmpeg working FFmpeg ASUS V2 [asv2]
ffvcr1 ffmpeg working FFmpeg ATI VCR1 [vcr1]
ffcljr ffmpeg working FFmpeg Cirrus Logic AccuPak (CLJR) [cljr]
ffsvq1 ffmpeg working FFmpeg Sorenson Video v1 (SVQ1) [svq1]
ff4xm ffmpeg working FFmpeg 4XM video [4xm]
ffvixl ffmpeg working Miro/Pinnacle VideoXL codec [xl]
ffqtdrw ffmpeg working QuickDraw native decoder [qdraw]
ffindeo2 ffmpeg working Indeo 2 native decoder [indeo2]
ffflv ffmpeg working FFmpeg Flash video [flv]
fffsv ffmpeg working FFmpeg Flash Screen video [flashsv]
ffdivx ffmpeg working FFmpeg DivX ;-) (MSMPEG-4 v3) [msmpeg4]
ffmp42 ffmpeg working FFmpeg MSMPEG-4 v2 [msmpeg4v2]
ffmp41 ffmpeg working FFmpeg MSMPEG-4 v1 [msmpeg4v1]
ffwmv1 ffmpeg working FFmpeg WMV1/WMV7 [wmv1]
ffwmv2 ffmpeg working FFmpeg WMV2/WMV8 [wmv2]
ffwmv3 ffmpeg problems FFmpeg WMV3/WMV9 [wmv3]
ffvc1 ffmpeg problems FFmpeg WVC1 [vc1]
ffh264 ffmpeg working FFmpeg H.264 [h264]
ffsvq3 ffmpeg working FFmpeg Sorenson Video v3 (SVQ3) [svq3]
ffodivx ffmpeg working FFmpeg MPEG-4 [mpeg4]
ffwv1f ffmpeg working WV1F MPEG-4 [mpeg4]
fflibschroedinger ffmpeg working Dirac (through FFmpeg libschroedinger) [libschroedinger]
fflibdirac ffmpeg working Dirac (through FFmpeg libdirac) [libdirac]
xvid xvid working Xvid (MPEG-4) [libxvidcore.a]
divx4vfw vfw problems DivX4Windows-VFW [divx.dll]
divxds dshow working DivX ;-) (MSMPEG-4 v3) [divx_c32.ax]
divx vfw working DivX ;-) (MSMPEG-4 v3) [divxc32.dll]
mpeg4ds dshow working Microsoft MPEG-4 v1/v2 [mpg4ds32.ax]
mpeg4 vfw working Microsoft MPEG-4 v1/v2 [mpg4c32.dll]
wmv9dmo dmo working Windows Media Video 9 DMO [wmv9dmod.dll]
wmvdmo dmo working Windows Media Video DMO [wmvdmod.dll]
wmv8 dshow working Windows Media Video 8 [wmv8ds32.ax]
wmv7 dshow working Windows Media Video 7 [wmvds32.ax]
wmvadmo dmo working Windows Media Video Adv DMO [wmvadvd.dll]
wmvvc1dmo dmo working Windows Media Video (VC-1) Advanced Profile Decoder [wvc1dmod.dll]
wmsdmod dmo working Windows Media Screen Codec 2 [wmsdmod.dll]
ubmp4 vfw problems UB Video MPEG-4 [ubvmp4d.dll]
zrmjpeg zrmjpeg problems Zoran MJPEG passthrough
ffmjpeg ffmpeg working FFmpeg MJPEG decoder [mjpeg]
ffmjpegb ffmpeg working FFmpeg MJPEG-B decoder [mjpegb]
ijpg ijpg working Independent JPEG Group's codec [libjpeg]
m3jpeg vfw working Morgan Motion JPEG Codec [m3jpeg32.dll]
mjpeg vfw working MainConcept Motion JPEG [mcmjpg32.dll]
avid vfw working AVID Motion JPEG [AvidAVICodec.dll]
LEAD vfw working LEAD (M)JPEG [LCodcCMP.dll]
imagepower vfw problems ImagePower MJPEG2000 [jp2avi.dll]
m3jpeg2k vfw working Morgan MJPEG2000 [m3jp2k32.dll]
m3jpegds dshow crashing Morgan MJPEG [m3jpegdec.ax]
pegasusm vfw crashing Pegasus Motion JPEG [pvmjpg21.dll]
pegasusl vfw crashing Pegasus lossless JPEG [pvljpg20.dll]
pegasusmwv vfw crashing Pegasus Motion Wavelet 2000 [pvwv220.dll]
vivo vfw working Vivo H.263 [ivvideo.dll]
u263 dshow working UB Video H.263/H.263+/H.263++ Decoder [ubv263d+.ax]
i263 vfw working I263 [i263_32.drv]
ffi263 ffmpeg working FFmpeg I263 decoder [h263i]
ffh263 ffmpeg working FFmpeg H.263+ decoder [h263]
ffzygo ffmpeg untested FFmpeg ZyGo [h263]
h263xa xanim crashing XAnim's CCITT H.263 [vid_h263.xa]
ffh261 ffmpeg working CCITT H.261 [h261]
qt261 qtvideo working QuickTime H.261 video decoder [QuickTime.qts]
h261xa xanim problems XAnim's CCITT H.261 [vid_h261.xa]
m261 vfw untested M261 [msh261.drv]
indeo5ds dshow working Intel Indeo 5 [ir50_32.dll]
indeo5 vfwex working Intel Indeo 5 [ir50_32.dll]
indeo4 vfw working Intel Indeo 4.1 [ir41_32.dll]
indeo3 vfwex working Intel Indeo 3.1/3.2 [ir32_32.dll]
indeo5xa xanim working XAnim's Intel Indeo 5 [vid_iv50.xa]
indeo4xa xanim working XAnim's Intel Indeo 4.1 [vid_iv41.xa]
indeo3xa xanim working XAnim's Intel Indeo 3.1/3.2 [vid_iv32.xa]
qdv dshow working Sony Digital Video (DV) [qdv.dll]
ffdv ffmpeg working FFmpeg DV decoder [dvvideo]
libdv libdv working Raw DV decoder (libdv) [libdv.so.2]
mcdv vfw working MainConcept DV Codec [mcdvd_32.dll]
3ivXxa xanim working XAnim's 3ivx Delta 3.5 plugin [vid_3ivX.xa]
3ivX dshow working 3ivx Delta 4.5 [3ivxDSDecoder.ax]
rv3040 realvid working Linux RealPlayer 10 RV30/40 decoder [drvc.so]
rv3040win realvid working Win32 RealPlayer 10 RV30/40 decoder [drvc.dll]
rv40 realvid working Linux RealPlayer 9 RV40 decoder [drv4.so.6.0]
rv40win realvid working Win32 RealPlayer 9 RV40 decoder [drv43260.dll]
rv40mac realvid working Mac OS X RealPlayer 9 RV40 decoder [drvc.bundle/Contents/MacOS/drvc]
rv30 realvid working Linux RealPlayer 8 RV30 decoder [drv3.so.6.0]
rv30win realvid working Win32 RealPlayer 8 RV30 decoder [drv33260.dll]
rv30mac realvid working Mac OS X RealPlayer 9 RV30 decoder [drvc.bundle/Contents/MacOS/drvc]
ffrv20 ffmpeg working FFmpeg RV20 decoder [rv20]
rv20 realvid working Linux RealPlayer 8 RV20 decoder [drv2.so.6.0]
rv20winrp10 realvid working Win32 RealPlayer 10 RV20 decoder [drv2.dll]
rv20win realvid working Win32 RealPlayer 8 RV20 decoder [drv23260.dll]
rv20mac realvid working Mac OS X RealPlayer 9 RV20 decoder [drv2.bundle/Contents/MacOS/drv2]
ffrv10 ffmpeg working FFmpeg RV10 decoder [rv10]
alpary dshow working Alparysoft lossless codec dshow [aslcodec_dshow.dll]
alpary2 vfw working Alparysoft lossless codec vfw [aslcodec_vfw.dll]
LEADMW20 dshow working Lead CMW wavelet 2.0 [LCODCCMW2E.dll]
lagarith vfw working Lagarith Lossless Video Codec [lagarith.dll]
psiv vfw working Infinite Video PSI_V [psiv.dll]
canopushq vfw working Canopus HQ Codec [CUVCcodc.dll]
canopusll vfw working Canopus Lossless Codec [CLLCcodc.dll]
ffvp3 ffmpeg untested FFmpeg VP3 [vp3]
fftheora ffmpeg untested FFmpeg Theora [theora]
vp3 vfwex working On2 Open Source VP3 Codec [vp31vfw.dll]
vp4 vfwex working On2 VP4 Personal Codec [vp4vfw.dll]
ffvp5 ffmpeg working FFmpeg VP5 decoder [vp5]
vp5 vfwex working On2 VP5 Personal Codec [vp5vfw.dll]
ffvp6 ffmpeg working FFmpeg VP6 decoder [vp6]
ffvp6a ffmpeg untested FFmpeg VP6A decoder [vp6a]
ffvp6f ffmpeg working FFmpeg VP6 Flash decoder [vp6f]
vp6 vfwex working On2 VP6 Personal Codec [vp6vfw.dll]
vp7 vfwex working On2 VP7 Personal Codec [vp7vfw.dll]
mwv1 vfw working Motion Wavelets [icmw_32.dll]
asv2 vfw working ASUS V2 [asusasv2.dll]
asv1 vfw working ASUS V1 [asusasvd.dll]
ffultimotion ffmpeg working IBM Ultimotion native decoder [ultimotion]
ultimotion vfw working IBM Ultimotion [ultimo.dll]
mss1 dshow working Windows Screen Video [msscds32.ax]
ucod vfw working UCOD-ClearVideo [clrviddd.dll]
vcr2 vfw working ATI VCR-2 [ativcr2.dll]
CJPG vfw working CJPG [CtWbJpg.DLL]
ffduck ffmpeg working Duck Truemotion1 [truemotion1]
fftm20 ffmpeg working FFmpeg Duck/On2 TrueMotion 2.0 [truemotion2]
tm20 dshow working TrueMotion 2.0 [tm20dec.ax]
ffamv ffmpeg working Modified MJPEG, used in AMV files [amv]
ffsp5x ffmpeg working SP5x codec - used by Aiptek MegaCam [sp5x]
sp5x vfw working SP5x codec - used by Aiptek MegaCam [sp5x_32.dll]
vivd2 vfw working SoftMedia ViVD V2 codec VfW [ViVD2.dll]
winx vfwex working Winnov Videum winx codec [wnvwinx.dll]
ffwnv1 ffmpeg working FFmpeg wnv1 native codec [wnv1]
wnv1 vfwex working Winnov Videum wnv1 codec [wnvplay1.dll]
vdom vfw working VDOWave codec [vdowave.drv]
lsv vfw working Vianet Lsvx Video Decoder [lsvxdec.dll]
ffvmnc ffmpeg working FFmpeg VMware video [vmnc]
vmnc vfw working VMware video [vmnc.dll]
ffsmkvid ffmpeg working FFmpeg Smacker Video [smackvid]
ffcavs ffmpeg working Chinese AVS Video [cavs]
ffdnxhd ffmpeg working FFmpeg DNxHD decoder [dnxhd]
qt3ivx qtvideo working win32/quicktime 3IV1 (3ivx) decoder [3ivx Delta 3.5.qtx]
qtactl qtvideo working Win32/QuickTime Streambox ACT-L2 [ACTLComponent.qtx]
qtavui qtvideo working Win32/QuickTime Avid Meridien Uncompressed [AvidQTAVUICodec.qtx]
qth263 qtvideo crashing Win32/QuickTime H.263 decoder [QuickTime.qts]
qtrlerpza qtvideo crashing Win32/Quicktime RLE/RPZA decoder [QuickTime.qts]
qtvp3 qtvideo crashing Win32/QuickTime VP3 decoder [On2_VP3.qtx]
qtzygo qtvideo problems win32/quicktime ZyGo decoder [ZyGoVideo.qtx]
qtbhiv qtvideo untested Win32/QuickTime BeHereiVideo decoder [BeHereiVideo.qtx]
qtcvid qtvideo working Win32/QuickTime Cinepak decoder [QuickTime.qts]
qtindeo qtvideo crashing Win32/QuickTime Indeo decoder [QuickTime.qts]
qtmjpeg qtvideo crashing Win32/QuickTime MJPEG decoder [QuickTime.qts]
qtmpeg4 qtvideo crashing Win32/QuickTime MPEG-4 decoder [QuickTime.qts]
qtsvq3 qtvideo working Win32/QuickTime SVQ3 decoder [QuickTimeEssentials.qtx]
qtsvq1 qtvideo problems Win32/QuickTime SVQ1 decoder [QuickTime.qts]
vsslight vfw working VSS Codec Light [vsslight.dll]
vssh264 dshow working VSS H.264 New [vsshdsd.dll]
vssh264old vfw working VSS H.264 Old [vssh264.dll]
vsswlt vfw working VSS Wavelet Video Codec [vsswlt.dll]
zlib vfw working AVIzlib [avizlib.dll]
mszh vfw working AVImszh [avimszh.dll]
alaris vfwex crashing Alaris VideoGramPiX [vgpix32d.dll]
vcr1 vfw crashing ATI VCR-1 [ativcr1.dll]
pim1 vfw crashing Pinnacle Hardware MPEG-1 [pclepim1.dll]
qpeg vfw working Q-Team's QPEG (www.q-team.de) [qpeg32.dll]
rricm vfw crashing rricm [rricm.dll]
ffcamtasia ffmpeg working TechSmith Camtasia Screen Codec (native) [camtasia]
camtasia vfw working TechSmith Camtasia Screen Codec [tsccvid.dll]
ffcamstudio ffmpeg working CamStudio Screen Codec [camstudio]
fraps vfw working FRAPS: Realtime Video Capture [frapsvid.dll]
fffraps ffmpeg working FFmpeg Fraps [fraps]
fftiertexseq ffmpeg working FFmpeg Tiertex SEQ [tiertexseqvideo]
ffvmd ffmpeg working FFmpeg Sierra VMD video [vmdvideo]
ffdxa ffmpeg working FFmpeg Feeble Files DXA video [dxa]
ffdsicinvideo ffmpeg working FFmpeg Delphine CIN video [dsicinvideo]
ffthp ffmpeg working FFmpeg THP video [thp]
ffbfi ffmpeg working FFmpeg BFI Video [bfi]
ffbethsoftvid ffmpeg problems FFmpeg Bethesda Software VID [bethsoftvid]
ffrl2 ffmpeg working FFmpeg RL2 decoder [rl2]
fftxd ffmpeg working FFmpeg Renderware TeXture Dictionary decoder [txd]
xan vfw working XAN Video [xanlib.dll]
ffwc3 ffmpeg problems FFmpeg XAN wc3 [xan_wc3]
ffidcin ffmpeg problems FFmpeg Id CIN video [idcinvideo]
ffinterplay ffmpeg problems FFmpeg Interplay Video [interplayvideo]
ffvqa ffmpeg problems FFmpeg VQA Video [vqavideo]
ffc93 ffmpeg problems FFmpeg C93 Video [c93]
rawrgb32 raw working RAW RGB32
rawrgb24 raw working RAW RGB24
rawrgb16 raw working RAW RGB16
rawbgr32flip raw working RAW BGR32
rawbgr32 raw working RAW BGR32
rawbgr24flip raw working RAW BGR24
rawbgr24 raw working RAW BGR24
rawbgr16flip raw working RAW BGR15
rawbgr16 raw working RAW BGR15
rawbgr15flip raw working RAW BGR15
rawbgr15 raw working RAW BGR15
rawbgr8flip raw working RAW BGR8
rawbgr8 raw working RAW BGR8
rawbgr1 raw working RAW BGR1
rawyuy2 raw working RAW YUY2
rawyuv2 raw working RAW YUV2
rawuyvy raw working RAW UYVY
raw444P raw working RAW 444P
raw422P raw working RAW 422P
rawyv12 raw working RAW YV12
rawnv21 hmblck working RAW NV21
rawnv12 hmblck working RAW NV12
rawhm12 hmblck working RAW HM12
rawi420 raw working RAW I420
rawyvu9 raw working RAW YVU9
rawy800 raw working RAW Y8/Y800
null null crashing NULL codec (no decoding!)
ID_EXIT=NONE
I manually compiled using the svn source that I currently use on my Gentoo system and get the same odd results, whereas on Gentoo it compiles as you expect. This would seem to indicate that there is something about the Arch environment which is causing the problem rather than purely the source code.
I tried installing mplayer-vdpau-nogui but have the same problem there.

Suspend / Resume problem with -ck kernels.

Sometimes with the linux-ck kernel my laptop doesn't suspend / resume correctly.
Sometimes when suspending my laptop will take "extra long" to suspend.
When it resumes the processor & fan will turn on, but the suspend light will still be blinking and the screen doesn't turn on. Sometimes (but not always) the caps-lock light will start blinking after I try to wake it up, like a kernel panic. It happens more often when closing the lid to suspend, but has happened while suspending manually.
This only happens with -ck kernels. I have tried both the linux-ck and linux-ck-corex kernels with same result. This started happening around kernel 3.0.8 I believe. I thought it was a bug that would be fixed, but it still occurs.
I have a Lenovo Thinkpad T410s, Intel Core i5, Intel graphics. I use the TLP scripts for power savings, and Xfce-Power-Manager for my power manager. I can see nothing relevant in the logs. Suspend / Resume always works with the "official" kernel.
Any ideas?

Ok, I think I narrowed the problem down to the BFS scheduler.
I compiled "linux-bfs" from the AUR, installed it and rebooted and lo and behold my suspend / resume problem was back. Rebooted with the stock kernel, did about 10 suspend & resume cycles in a row... and it worked great each time.
Sometimes when using linux-bfs or linux-ck, I can "revive" the system after a bad resume, by closing the lid and opening it slowly. Also I know the screen is just not "off", because the caps lock key light will not respond. If the caps-lock key light starts blinking (on-and-off) after a resume, I assume it is a kernel panic, and nothing besides a forced power-off will fix it.
Last edited by jon (2011-12-09 18:11:27)

My iMac crashed during rester with a kernel panic. What is wrong with it?

Hi. My iMac purchaced last month crashed during restart and it issued me with a Kernel panic report. Is there something wrong with the machine?
The report reads as follow:
Interval Since Last Panic Report: 72215 sec
Panics Since Last Report:          1
Anonymous UUID:                    EE4EEBBB-4B06-DAC0-4F2C-6656F553115A
Sun Oct 6 18:37:36 2013
panic(cpu 1 caller 0xffffff8023ab8945): Kernel trap at 0x0000000000000000, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000039491031, CR4: 0x00000000001606e0
RAX: 0xffffff80395c4000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0xffffff803872ec00
RSP: 0xffffff8116893a98, RBP: 0xffffff8116893ad0, RSI: 0xffffff80f6ca7b44, RDI: 0xffffff80395af800
R8: 0x0000000000000000, R9: 0xffffff8116893304, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8038328000, R13: 0x0000000000000000, R14: 0x0000000000000001, R15: 0xffffff8039598400
RFL: 0x0000000000010286, RIP: 0x0000000000000000, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000010, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff8116893730 : 0xffffff8023a1d636
0xffffff81168937a0 : 0xffffff8023ab8945
0xffffff8116893970 : 0xffffff8023acebfd
0xffffff8116893990 : 0x0
0xffffff8116893ad0 : 0xffffff7fa51a46f1
0xffffff8116893b00 : 0xffffff7fa51802b3
0xffffff8116893b30 : 0xffffff7fa416b380
0xffffff8116893b70 : 0xffffff7fa416d75b
0xffffff8116893b90 : 0xffffff7fa4172b73
0xffffff8116893bc0 : 0xffffff8023e70b13
0xffffff8116893c20 : 0xffffff8023e6e74f
0xffffff8116893d70 : 0xffffff8023a98c21
0xffffff8116893e80 : 0xffffff8023a20b4d
0xffffff8116893eb0 : 0xffffff8023a10448
0xffffff8116893f00 : 0xffffff8023a1961b
0xffffff8116893f70 : 0xffffff8023aa6546
0xffffff8116893fb0 : 0xffffff8023acf473
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7fa415f000->0xffffff7fa4196fff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7fa411c000
         com.apple.GeForce(8.1.6)[0E3D8776-A5B7-3D82-9BFD-9188170B358D]@0xffffff7fa517c0 00->0xffffff7fa5249fff
            dependency: com.apple.NVDAResman(8.1.6)[EA4F9902-5AAE-3F1D-A846-3796221C8C91]@0xffffff7fa41 b6000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7fa41a2000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7fa411c000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7fa415f000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12F45
Kernel version:
Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
Kernel slide:     0x0000000023800000
Kernel text base: 0xffffff8023a00000
System model name: iMac13,2 (Mac-FC02E91DDD3FA6A4)
System uptime in nanoseconds: 19597183232
last loaded kext at 18740272837: com.apple.driver.AppleBluetoothMultitouch          75.19 (addr 0xffffff7fa5d42000, size 77824)
loaded kexts:
com.apple.driver.AppleBluetoothMultitouch          75.19
com.apple.iokit.IOBluetoothSerialManager          4.1.7f2
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.ApplePlatformEnabler          2.0.7d2
com.apple.driver.AGPM          100.13.12
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleHDAHardwareConfigDriver          2.4.7fc4
com.apple.driver.AppleHDA          2.4.7fc4
com.apple.driver.AppleUpstreamUserClient          3.5.12
com.apple.iokit.IOBluetoothUSBDFU          4.1.7f2
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.1.7f4
com.apple.GeForce          8.1.6
com.apple.driver.AppleMuxControl          3.4.5
com.apple.driver.AppleBacklight          170.3.5
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.driver.AppleMikeyDriver          2.4.7fc4
com.apple.driver.AppleIntelHD4000Graphics          8.1.6
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.4.5
com.apple.driver.AppleLPC          1.6.3
com.apple.driver.AppleSMBusPCI          1.0.11d1
com.apple.driver.AppleIntelFramebufferCapri          8.1.6
com.apple.nvidia.NVDAStartup          8.1.6
com.apple.iokit.SCSITaskUserClient          3.5.6
com.apple.driver.AppleUSBODD          3.3.1
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.5
com.apple.driver.AppleUSBHub          635.4.0
com.apple.driver.AppleSDXC          1.4.3
com.apple.iokit.AppleBCM5701Ethernet          3.6.2b4
com.apple.driver.AppleAHCIPort          2.6.6
com.apple.driver.AirPort.Brcm4331          615.20.17
com.apple.driver.AppleUSBEHCI          621.4.6
com.apple.driver.AppleUSBXHCI          635.4.0
com.apple.driver.AppleACPIButtons          1.8
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.8
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          214.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2.1
com.apple.driver.AppleIntelCPUPowerManagement          214.0.0
com.apple.driver.IOBluetoothHIDDriver          4.1.7f2
com.apple.driver.AppleMultitouchDriver          237.4
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.4.7fc4
com.apple.iokit.IOAudioFamily          1.9.2fc7
com.apple.kext.OSvKernDSPLib          1.12
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.1.7f2
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.nvidia.gk100hal          8.1.6
com.apple.NVDAResman          8.1.6
com.apple.iokit.IOAcceleratorFamily          74.15
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.driver.AppleThunderboltEDMSink          1.2.0
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.iokit.IOSurface          86.0.4
com.apple.iokit.IOBluetoothFamily          4.1.7f2
com.apple.driver.AppleSMC          3.1.5d4
com.apple.driver.AppleGraphicsControl          3.4.5
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.driver.IOPlatformPluginFamily          5.4.1d13
com.apple.driver.AppleHDAController          2.4.7fc4
com.apple.iokit.IOHDAFamily          2.4.7fc4
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.6
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.6
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOUSBMassStorageClass          3.5.2
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.6
com.apple.iokit.IOUSBHIDDriver          623.4.0
com.apple.driver.AppleThunderboltDPOutAdapter          2.5.0
com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter          1.3.2
com.apple.driver.AppleUSBMergeNub          621.4.6
com.apple.driver.AppleUSBComposite          621.4.0
com.apple.driver.AppleThunderboltNHI          1.9.2
com.apple.iokit.IOThunderboltFamily          2.7.7
com.apple.iokit.IOUSBUserClient          630.4.4
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IOAHCIFamily          2.5.1
com.apple.iokit.IO80211Family          530.5
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          635.4.0
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.8
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: iMac13,2, BootROM IM131.010A.B04, 4 processors, Intel Core i5, 2.9 GHz, 8 GB, SMC 2.11f14
Graphics: NVIDIA GeForce GTX 660M, NVIDIA GeForce GTX 660M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.7f2 12718, 3 service, 21 devices, 3 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD ST1000DM003, 1 TB
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: hub_device, 0x058f (Alcor Micro, Corp.), 0x6254, 0x1a120000 / 4
USB Device: hub_device, 0x058f (Alcor Micro, Corp.), 0x6254, 0x1a124000 / 6
USB Device: Ext HDD 1021, 0x1058 (Western Digital Technologies, Inc.), 0x1021, 0x1a124100 / 7
USB Device: PTK-640, 0x056a (WACOM Co., Ltd.), 0x00b9, 0x1a123000 / 5
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8511, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: MacBook Air SuperDrive, apple_vendor_id, 0x1500, 0x1d130000 / 5
USB Device: hub_device, 0x0424 (SMSC), 0x2412, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x828b, 0x1d181300 / 7

Hi, Linc Davis, can you tell me witch type of error that was? CPU error, GPU error, so on. Thanks.

HT5219 When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.

When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.

You are being scammed. Please ignore and close. Do not click any links or call any phone numbers!
Remove Browser Pop-up Problems
     AdwareMedic
     Adblock Plus 1.8.9
     remove adware that displays pop-up ads and graphics on your Mac

It takes a long time to open up documents on my Imac. I get the multicolor circle for a long time. I have 27 In Mid 2010 3.2 ghz Intel core I3 with 16 gb memory.

It takes a long time to open up documents on my Imac. I get the multicolor circle for a long time. I have 27 In Mid 2010 3.2 ghz Intel core I3 with 16 gb memory.

There are file hidden all around in your system.
Go to Phil Stokes' info page, for a gerat uninstall primer.

Multiple instances of mplayer with jack

"_R_ealtime software mixing ?!?! wtf thats awesome--actually im not a studio junkie, i just need sound on one of them"
i understand that the casual nature of my involvement with jackd suggests a less-than-appropriate level of respect and diligence for what this almighty app is capable of serving up. i just need to level audio volume on multiple instances of mplayer with software mixing (my sound card is cheap).
all my jackd configs are vanilla from the wiki as stated below. if anyone has another solution or a request for information in regard to this solution please reply. as always, thanks in advance
--here is some err... background
i have a some files that i would like to run with mplayer and a video file [with its own audio] that i would like to run concurrently. it should be possible to use jackd to let one instance of mplayer show video with no sound while permitting the audio from the other instance to play at arbitrary volume. without jack, i cannot control sound independantly since both instances seem to use the same device (PCM0). furthermore i have found that starting multiple instances of mplayer leads to weird artifacts which persist after all running instances of mplayer concurrent with artifact appearance have been closed.
so i installed jack-audio-connection-kit following the wiki verbatim. then i installed qjackctl. starting jackd as root and qjackctl with sudo allowed me to see the first instance of mplayer but not the second.
what is the difference between running mplayer through alsa and running mplayer through jack through alsa (not sure if the objects are accurately laid out there but whatever)? the wiki basically provides an out of the box solution for software mixing a bunch of inputs (i have friends who do sound professionally though not with linux and im envisioning way more complicated stuff than my humble pair of mplayers
Last edited by poopship21 (2010-09-25 15:20:56)

ngoonee wrote:
karol wrote:
ngoonee wrote:And running mplayer through alsa won't be able to do what you want, simply because the mixing is fixed. JACK and pulseaudio are sound servers which allow you to control the mixing, both can do what you want.
If you run one file with '-ao null' and the other one with '-vo null' you can manipulate them independently, there's no sound mixing involved, it just allows you "to add visuals to an audio feed spontaneously". They can both be run with 'af scaletempo' to speed up / slow down etc.
Hmm, wonder if that's what the OP was looking for?
From his first posts:
poopship21 wrote:it should be possible to use jackd to let one instance of mplayer show video with no sound while permitting the audio from the other instance to play at arbitrary volume
Also, read his second post. <shrugs>

I need the Adobe Flash Player version 11.1.102.64plug in on my MacAir to view Ustream videos. Adobe message says the version is for Intel-based Macs with Safari; also says that I "may have to temporarily disable antivirus software. is it safe to download?

I need the Adobe Flash Player version 11.1.102.64plug in on my MacAir to view Ustream videos. Adobe message says the version is for Intel-based Macs with Safari; also says that I "may have to temporarily disable antivirus software. is it safe to download?

Your MacBook Air is an Intel-based system. To download the current version (11.2.202.228), go to http://get.adobe.com/flashplayer/ and download it from there.
If there is still a Flash issue, you can try the Google Chrome browser, which has the current Flash built into it, to see if it works any differently with the videos. It's available from https://www.google.com/chrome

Have MacBook Pro (ancient) has 2.16 Ghz Intel Core Duo with 1 GB 667 MHz RAM using OS 10.4.11. Can I upgrade OS? If so, how far? And can I add more memory? I realize this is an old laptop but I need to wait to upgrade to new.

Have MacBook Pro (ancient) has
2.16 Ghz Intel Core Duo with
1 GB 667 MHz RAM
using OS 10.4.11.
Can I upgrade OS? If so, how far?
And can I add more memory?
I realize this is an old laptop but I need to wait to upgrade to new.

if it is the core duo, mac OS X 10.6.8., max ram 2gb.

I have a mac computer 3.2 Ghz intel core i3 with memory 4GB 1333 MHz DDR3, I have recently purchased an new macbook and have yosemite software and iCloud . I can no longer us my mac to open up recent numbers documents from my macbook. I am unabl

I have a mac computer 3.2 Ghz intel core i3 with memory 4GB 1333 MHz DDR3, I have recently purchased an new macbook and have yosemite software and iCloud . I can no longer us my mac to open up recent numbers documents from my macbook. I am unable to upgrade to allow me to get the current numbers version on my mac. What do I need to do to get all my machines woking in harmony again

On each machine turn on iCloud and sync all the available apps. Apple explains how to set up iCloud in http://www.apple.com/icloud/setup/
After doing this run software update on each machine and install all the suggested updates. If you still need help installing the most up-to-date versions of iLife and iWorks open the Mac App Store - click the Purchased tab and update all that need to be updated.

I can't install Windows 7 key over KMS host with WS 2012 R2

Hi
I have a KMS Host with Windows Server 2012 R2. I don't have problems installing keys for Windows 8, Windows 8.1, Office 2013, Windows Server 2012 R2. However, when I tried install keys for Windows 7, Windows 2008 R2 and Windows 2008, I have the next message:
C:\slmgr.vbs /ipk <Windows 7 key>
Error: 0xC004F050 The Software Licensing Service reported that the product key is invalid
I've installed the keys from the same source.
Gary

Hi
I have a KMS Host with Windows Server 2012 R2. I don't have problems installing keys for Windows 8, Windows 8.1, Office 2013, Windows Server 2012 R2. However, when I tried install keys for Windows 7, Windows 2008 R2 and Windows 2008, I have the next message:
C:\slmgr.vbs /ipk <Windows 7 key>
Error: 0xC004F050 The Software Licensing Service reported that the product key is invalid
I've installed the keys from the same source.
Gary
For a KMShost with the OS=WS2012R2, you cannot, and, there is no need to, install any other Windows KMShost keys. The WS2012R2 KMShost key, by itself, will activate the KMShost OS, and will also enable the issuing of activations for ALL Windows KMSclients.
Office KMS features are different, and do need to be installed for Office KMSclient activations.
The error you are experiencing is expected, and is a result of your attempt to perform an unnecessary configuration step.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

[SOLVED] How to add modules to build with the kernel?

Hello i´m trying to learn how to build my own custom kernel and doing it the arch way https://wiki.archlinux.org/index.php/Ke … raditional. But unfortunately dm-crypt was not included in the kernel so it all failed.
svart_alg% sudo mkinitcpio -k 3.15.6 -c /etc/mkinitcpio.conf -g /boot/initramfs-test.img
==> Starting build: 3.15.6
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [lvm2]
==> ERROR: module not found: ‘dm-snapshot’
-> Running build hook: [encrypt]
==> ERROR: module not found: ‘dm-crypt’
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> WARNING: No modules were added to the image. This is probably not what you want.
==> Creating gzip initcpio image: /boot/initramfs-test.img
==> WARNING: errors were encountered during the build. The image may not be complete.
I have never don any of this before and have no idea of how to add a missing module to the kernel i´m building. So i search on internet and had a very hard time finding a good guide for this but i fond one possible solution. https://www.kernel.org/doc/Documentatio … odules.txt
svart_alg% make -C /home/nigro_alko/Kernel/linux-3.15.6 M=/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in
make: Entering directory ‘/home/nigro_alko/Kernel/linux-3.15.6‘
mkdir: cannot create directory ‘/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in’: Not a directory
scripts/Makefile.build:44: /home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in/Makefile: Not a directory
make[1]: *** No rule to make target ‘/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in/Makefile’. Stop.
Makefile:1310: recipe for target ‘_module_/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in’ failed
make: *** [_module_/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in] Error 2
make: Leaving directory ‘/home/nigro_alko/Kernel/linux-3.15.6‘
So is there any one that have time to help a lost little newbie i would bee very happy :-)
Last edited by Moosey_Linux (2014-07-29 15:00:40)

karol wrote:Why do you want a custom kernel in the first place?
Moosey_Linux wrote:i´m trying to learn how to build my own custom kernel
Reason enough IMO. But anyway... you refer to the Traditional build method in the wiki, but is it possible you didn't really read it? Or maybe you only skimmed it? Did you run make menuconfig? Did you try to build everything in instead of using modules? That mkinitcpio output suggests that you did.
As suggested there for first-timers, it's a good idea to start with a kernel configuration that is known to work - the Arch config is the obvious choice, but there are other sources e.g. http://kernel-seeds.org/ .

Intel KMS + mplayer with .32 kernel

Similar Messages

Maybe you are looking for