Intel log errors in Xorg.0.log

My Xorg.0.log is filled every second or so with the following block and it gradually grows larger and larger (ten thousands of lines):
[ 114.832] (II) intel(0): Printing DDC gathered Modelines:
[ 114.832] (II) intel(0): Modeline "1280x800"x0.0 69.32 1280 1292 1356 1416 800 803 806 816 -hsync -vsync (49.0 kHz)
[ 114.867] (II) intel(0): EDID vendor "SEC", prod id 19522
Why is this? Is there some way to stop whatever intel function from doing so? Lately, I have experienced Xorg crashing for unknown reasons, but I don't know if it's related. I have both the intel-dri 7.11-1 package and xf86-video-intel 2.15.0-2 installed.
Any advice would be helpful.
Last edited by roygbiv (2011-09-05 14:12:01)

Thanks, but it didn't change the matter. However, I'm getting more serious log errors:
$ tail /var/log/Xorg.0.log
[ 83.558] (II) intel(0): Modeline "1280x800"x0.0 69.32 1280 1292 1356 1416 800 803 806 816 -hsync -vsync (49.0 kHz)
[ 2513.587] (EE) intel(0): [DRI2] DRI2SwapComplete: bad drawable
[ 3343.637] (EE) intel(0): [DRI2] DRI2SwapComplete: bad drawable
[ 5166.039] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 5176.719] (II) Open ACPI successful (/var/run/acpid.socket)
[ 5176.719] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 5176.729] (II) intel(0): EDID vendor "SEC", prod id 19522
[ 5176.729] (II) intel(0): Printing DDC gathered Modelines:
[ 5176.729] (II) intel(0): Modeline "1280x800"x0.0 69.32 1280 1292 1356 1416 800 803 806 816 -hsync -vsync (49.0 kHz)
[ 5176.770] (--) SynPS/2 Synaptics TouchPad: touchpad found
My daemons:
DAEMONS=(syslog-ng dbus netfs ntpd crond acpid wicd alsa laptop-mode !slim)
I have googled this "bad drawable" issue but no solutions are out there. AFAIK this is the reason for my Xorg strange behaviour. Any similar experience, or maybe suggestions to share with me, guys/girls? What logs or configs should I post here?
Last edited by roygbiv (2011-09-05 14:24:01)

Similar Messages

[newbie] xorg, intel, I830WaitLpRing() error?

Folks;
first off, being rather new to archlinux, let me say I am pretty impressed with what I see after getting the system up and running. Been into Linux for quite a bunch of years by now, having dealt with Xubuntu as of recently and am looking for a more straightforward alternative which is, well, "lighter" on resources on my machine. Did I mention I was using Slackware before that?
Anyhow: Installing a current archlinux on my machine worked almost without any troubles, except for one "show-stopper": I am using a notebook featuring an intel 945gm display controller docked and connected to an external TFT, usually making use of xrandr to use a xinerama-like dual-screen experience (notebook-LVDS "right-of" the TFT). Usually I get this configured according to (1), which however made my X server just blow up immediately in arch. Reading through the Xorg.log, I found I am likely to be stumbled across (2) here as well (an issue that already bugged me in other distributions). The final post in the bug list mentions installing a pre-release intel driver right from xorg, and now I wonder what is the best way of doing so following the "arch way". Somehow I hesitate just to pull and install the package off freedesktop.org, are there any binary packages of that driver available right now? Is there a better way of getting this code installed?
Thanks loads and best regards,
Kristian
(1) http://www.thinkwiki.org/wiki/Xorg_RandR_1.2
(2) http://bugs.archlinux.org/task/8976

Folks,
adding to that: I have (kinda) resolved the issue temporarily by throwing in an intel_drv.so taken off a current ubuntu distribution which seems to make things work, at least now I am kind of a happy archlinux user in front of my two screens. However one more thing: I couldn't help noticing that, comparing to other distributions running dual-screen, it seems the X in arch is astoundingly slow in this setup. Any ideas why it could be this way?
TIA and best regards,
Kristian

[Solved] Problem with xf86-video-intel after upgrade to xorg 1.16

Hi everyone,
since the upgrade to xorg-server 1.16 i can't get X to work again on my thinkpad R50e with an old intel integrated chip (Intel Extreme Graphics 2).
I first encountered the error "cannot open /dev/tty0": http://okraits.de/upload/xorg/Xorg.0.log
Then i created /etc/X11/Xwrapper.config: http://okraits.de/upload/xorg/Xwrapper.config
Then i got the error "failed to set mode": http://okraits.de/upload/xorg/Xorg.1.log
My xorg.conf looks like this: http://okraits.de/upload/xorg/xorg.conf
I start X with startx and this .xinitrc: http://okraits.de/upload/xorg/.xinitrc
I have no clue how to fix this. Any help would be much appreciated!
Greetings,
Oliver
Last edited by okraits (2014-08-08 06:33:09)

lolilolicon wrote:
How do you start X? Note you must start X from the same VT where you login, if you use Xorg.bin (no setuid). From your log there're mentions of /dev/tty0 and "Using VT number 2", so I suppose that might be the problem.
If you simply use `startx`, the actual process running will be something like
/usr/bin/Xorg.bin -nolisten tcp :0 -auth /tmp/serverauth.XXXXXXXXXX vt1
Note the `vt1` in the line must be specified, where 1 is the value of $XDG_VTNR in the VT where you login.
Edit
In my log there's something yours are missing
[ 45.465] (++) using VT number 1
[ 45.465] (--) controlling tty is VT number 1, auto-enabling KeepTty
I login at tty1 (which is the first one visible after boot) and run startx from there.
I added the following to my .xinitrc:
echo "vt: $XDG_VTNR"
The output was:
vt: 1
That would be ok, right? Or is it $XDG_VTNR + 1?
So i am wondering what is forcing X to use vt 2. Or how i can tell X to use vt 1.
Last edited by okraits (2014-08-07 12:37:17)

Intel screen tearing after Xorg update

So after updating Xorg about a week ago, I have had constant screen tearing going on with my Intel chipset. I can't figure out what the issue is.
I am running Arch on a Macbook Air 5.2 with an Intel 4000 chipset. I am using AwesomeWM and LightDM.
[root@zakalwe xorg.conf.d]# uname -a
Linux zakalwe 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64 GNU/Linux
[root@zakalwe xorg.conf.d]# lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
Here is the output of "X -version"
X.Org X Server 1.16.2
Release Date: 2014-11-10
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.17.2-1-ARCH x86_64
Current Operating System: Linux zakalwe 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=0cbd6822-6139-45db-9bab-a5747b8a4bf7 rw quiet
Build Date: 10 November 2014 07:52:13PM
Current version of pixman: 0.32.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Here is the relevant /etc/X11/xorg.conf.d/ file
Section "Device"
Identifier "Intel Options"
Driver "intel"
Option "Backlight" "intel_backlight"
Option "TearFree" "true"
EndSection
Here is an excerpt from my Xorg.0.log file
[ 184.138] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 184.138] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 184.138] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 184.138] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 184.138] (==) intel(0): RGB weight 888
[ 184.138] (==) intel(0): Default visual is TrueColor
[ 184.138] (**) intel(0): Option "Backlight" "intel_backlight"
[ 184.138] (**) intel(0): Option "TearFree" "true"
[ 184.138] (II) intel(0): Output eDP1 has no monitor section
[ 184.138] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 184.138] (II) intel(0): Enabled output eDP1
Any ideas what is causing this/anyone else having the same issue?
Also, let me know if you need me to provide more info.

Perhaps the update did not apply successfully.
Download and reinstall it manually: http://support.apple.com/kb/DL1048.
Still happening after that? Try a safeboot and then restart: http://support.apple.com/kb/HT1455

Synaptics error with Xorg 1.8

Hi,
I get this in Xorg log:
$> cat /var/log/Xorg.0.log | grep -i synaptic
[ 1744.311] (II) LoadModule: "synaptics"
[ 1744.311] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 1744.312] (II) Module synaptics: vendor="X.Org Foundation"
[ 1744.312] (II) Synaptics touchpad driver version 1.2.2
[ 1744.417] (II) Synaptics touchpad driver version 1.2.2
[ 1745.393] AlpsPS/2 ALPS GlidePoint no synaptics event device found
[ 1745.440] Query no Synaptics: 6003C8
[ 1745.440] (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
[ 1745.473] (II) UnloadModule: "synaptics"
Even though, the touchpad somewhat works. It doesn't work as good as before though (ie cursor speed settings won't apply, SHMConfig doesn't work, ...)
Any ideas?
Last edited by kralyk (2010-06-23 13:29:22)

I have made a thread for this in another forum; it hasn't currently come up with a solution though.
http://bbs.archlinux.org/viewtopic.php?id=99482
As for configuration, you ought to be able to edit /etc/X11/xorg.conf.d/10-synaptics.conf. The ArchWiki has some updated information regarding Xorg 1.8 in that respect.

Error on Intel no error on PPC

I am developing a cocoa core data document program on both a MacBook (intel) and a mac mini (ppc). On the PPC, the project compiles and runs fine, but on the Intel, it compiles fine, but at runtime I get the following error.
2007-05-07 14:54:19.942 myProgram[5361] * -[NSBundle load]: Error loading code /Library/InputManagers/SIMBL/SIMBL.bundle/Contents/MacOS/SIMBL for bundle /Library/InputManagers/SIMBL/SIMBL.bundle, error code 2 (link edit error code 0, error number 0 ())
The error does not prevent it from running. In fact it does not seem to affect the functioning of the program at all. But I would like to know what is causing this error to show up and how to fix it. In case it might be relevant: each of the two projects (PPC and Intel) includes a framework that I wrote (so that my custom view would have a data binding in Interface Builder). The custom view appears to work with both versions.
Any ideas about what could be causing the problem and how to fix it? Thank you in advance.
I am using Xcode 2.4.1.

You have an outdated version of SIMBL that is not Univeral Binary. If you get the latest version or just remove SIMBL, the error should go away.
Developers should be careful with 3rd party system additions.They can introduce errors or hide them.

Intel RAID error in Device Manager after updating Intel Matrix Storage Console

The latest in my catalogue of problems arose after updating Intel Matrix Storage Console (IMSC) ...
Lost my RAID volume, but both drives were OK. However, IMSC seemed to be freezing, so I thought I'd install the latest version from Intel. Once installed, it gave me errors saying a plug in was not found, followed by messages saying that the SATA and RAID drivers were not installed. Device Manager thinks the drivers are OK, but the yellow triangle with the ! is shown against the Intel RAID driver. Tried un-installing and re-installing the controller, updating the drivers, different versions of IMSC and still get the yellow triangle with the !
I have been having trouble with the RAID0 set up for weeks so wonder if it has finally died? I'm out of ideas. Can anyone help?
This post gives more details of the history and PC configuration: https://forum-en.msi.com/index.php?topic=121960.0

Quote from: NovJoe on 23-March-09, 14:53:31
Why don't you want to follow up with your previous thread?
It'll be confusing when you started multiple threads linking to the issue.
Sorry, I haven't posted here much so I'm not familiar with the protocols. I just thought it would be less confusing to make this a separate issue. I linked them to avoid duplicating info on my config & h/w

Intel driver error

Morning,
First sorry for my english.
My laptop is HP ProBook 4730s.
Yesterday I reinstall my WIN7 (Windows 7 Ultimate x64).
I try to intall the drivers, but when I install the VGA it write an error "This computer does not meet the minimum requirements set for software installation".
I try some intel driver, and reisntall the windows, but the problem is still.
How can I solve the problem?
Thank you for the help.

Hi:
Your notebook probably has the amd/intel switchable graphics and if that is the case you only need to install the amd graphics driver, which installs the drivers for both the amd and Intel gpu's.
If your notebook has that graphics configuration, you cannot and should not try to install the standalone Intel graphics driver.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060895&sp...

Intel finds errors in Sandy Bridge chipset

I just saw this announcement that Intel has found design flaws in the new Sandy Bridge chipset and it looks like there will be a recall. I just bought a Satellite A660 with the i7-2630qm which has the Intel 6 series chipset in question. What a disappointment! I guess that's the risk you take when you buy new technology. I hope Toshiba will fix this for those who already have this processor. I was thinking about returning this model anyway and now I really want to get rid of it.
Solved!
Go to Solution.

Thanks for the response, Jim, but I'd like to register my disappointment with Toshiba's decision. I *like* my new Satellite and I'd much prefer to get it fixed. I'd like to point out that a certain competitor (rhymes with 'bell') is offering a refund, replace, or repair three-option solution. Toshiba's one size fits all solution, which really only benefits Toshiba and not their customers, looks pretty poor by comparison. I hope Toshiba reconsiders.
Mike

Refurbed dc7900 convertible mini tower Intel ME error

There is a thread on this problem that appears to have died without resolution.
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/dc7900-CMT-2233-HECI-Error-during-MEBX-ex...
I am hoping another go round might provide answers. I have done all the step listed in the noted thread. However despite numerous attempts, both via DOS and Win7, I have been unable to update the firmware for the ME portion of the BIOS.
Reading that I have done suggested that I could access the ME portion using Crtl-P on boot. Then do something similar to the Flash ROM command in the BIOS. That has only displayed a message listing the current version. I can't replace the motherboard as it doesn't seem to be manufactured anymore.
I don't know if it is significant, but, this error manifested after a power failure and only comes up at cold boot. Once it appears I can reboot with Crtl-Alt-Del and it boots normally. Once booted, I can reboot as many times as I want and the error doesn't occur. Shut the power off completely and I get the error.
This question was solved.
View Solution.

Hello fuddlyduddle,
I understand that you are experiencing issues with your HP Compaq dc7900 Business PC BIOS updating the way you expect. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Business PCs - Compaq, Elite, Pro.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

DRM Intel i915 errors

Hi,
After going out of blank mode, my external VGA monitor will randomly refuse to work (the primary laptop monitor works fine). This seems to be fixable only by rebooting.
Those errors show up in dmesg just after booting the computer :
[lun. avril 20 09:15:34 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
[lun. avril 20 09:15:35 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
[lun. avril 20 09:15:53 2015] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
[lun. avril 20 09:15:53 2015] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
Those show up every few minutes or so :
[lun. avril 20 12:35:30 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
[lun. avril 20 12:38:29 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
[lun. avril 20 13:15:04 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
[lun. avril 20 13:23:17 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
[lun. avril 20 13:23:30 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
[lun. avril 20 13:23:49 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
[lun. avril 20 13:24:03 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
[lun. avril 20 13:57:58 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
[lun. avril 20 13:58:11 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
When coming out of blank mode, those show up :
[lun. avril 20 14:16:06 2015] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to enable link training
[lun. avril 20 14:16:06 2015] [drm:intel_dp_complete_link_train [i915]] *ERROR* failed to start channel equalization
[lun. avril 20 14:16:07 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
I've already changed the acceleration method to UXA, without results (although I believe the problem show up less frequently but I'm unsure).
Any idea ?
Thanks in advance

Hi gentledevil,
There is a similar thread here https://bbs.archlinux.org/viewtopic.php?id=184857 and also a couple of bug reports [1] [2]. Unfortunately there is no solution yet.
gentledevil wrote:[lun. avril 20 12:35:30 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
Also, searching the kernel bug tracker for the error above leads to the the following report that may be related https://bugzilla.kernel.org/show_bug.cgi?id=90951

Solaris 8 Intel Installation Error: No suitable hard drives found

HI!
I was trying to install the free Solaris 8 Intel Edition from CD. All devices were recognized. Afterwards, however, I get the message that no suitable place was found to store the installation image. What should a hard disk look like in order to qualify for Solaris?
My system contains several hard drives. The first one, were I would like to install Solaris, is empty without any partitions. Under normal cicumstances (Linux, Windows), I would assume that this is the best possible case for a new operationg system...
Best regards
Klaus

Klaus,
I am having the exact same problem as you. I have the official Solaris CDs from Sun, but am not able to install Solaris on my PC. Installation progresses quite far - including screen, keyboard, time configuration - but then fails saying that it can't find any suitable HDDs.
I too, have two HDDs, one with Windows XP on it, and the other completely blank. However the Solaris installation does not recognise either of them.
I've even tried dis-connecting the Windows HDD in case it may have interfered somehow, but it has no affect.
Please see me message titled 'Intel Installation - Identifying HDDs' which I posted on this forum on 10th November. I haven't received any help on this issue.
Where do we go from here?

Intelli sync error and unable to remove desktop software

Hi, my problems started when I downloaded v.6 desktop software. Once I installed it i couldn't figure it out so i rolled it back and thought I could resume with my previous version of desktop v.5.05, now when i try and sync with my outlook I get a helpful 'unknown error'.
I tried to uninstall the software but got an error message 1316.a, so that doesn't work. I performed the windows install clean-up, but the desktop software is still on my desktop, although when I try and uninstall it from my c drive, it says it's not there!
So really no idea what the problem is. I looked at the clean uninstall steps provided on here, but cannot even do that, as cannot get beyond stage 1! Have been on Twitter with this, but no answer yet.
HELP! please, everything was fine before

This article should provide some more steps to remove the BlackBerry Desktop Software from your computer.
http://bbry.lv/bHe926 Have you tried the utility mentioned in the article to remove the Desktop software?
You may need to manually delete all RIM/BlackBerry folders from the computer.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

More Intel install errors!

I tried booting from CD 1 and I got the error message "cannot find boot.bin ". I have switched to another motherboard and install CD boots fine (CD1 of 2 still won't) but now I have issue with installer software copying to hard disk, after mini.root and platform specific files copy I get the following error message on reboot attempt., "fdisk: cannot stat device /dev/rdsk/c0d0
" Thanks for any help in advance"

CD 1 / 2 is bootable.
I think you should create a new CD and/or download the ISO-file again.

Acer Aspire 5750 Problems in Error.log

Hello,
I installed Arch on a Acer Aspire 5750 with:
i3-2330M CPU @ 2.20GHz
4 GB Ram
and Arch runs very well!
But by every boot of Arch I got this errors:
1: /usr/sbin/crond[469]: (CRON) INFO (Syslog will be used instead of sendmail.): Datei oder Verzeichnis nicht gefunden
But I do not ever install sendmail ...
2: kernel: [ 6.146484] sdhci-pci 0000:02:00.1: Invalid iomem size. You may experience problems.
3: kernel: [ 6.194110] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
4: kernel: [ 7.260867] nouveau 0000:01:00.0: Invalid ROM contents
5: kernel: [ 15.228768] [drm] nouveau 0000:01:00.0: 0xD518: i2c wr fail: -6
and I got a wlan error, but my wlan works very well.
My Arch runs well with this errors... I think this errors are not so bad, but I want to boot arch very fast and with this error messages I need 50 seconds...
The other Problem:
In the Wiki I read something about fgetty and agetty... I replaces agetty with fgetty in /etc/inittab and I installed fgetty via yaourt But I still got an fgetty error:
init: cannot execute "/sbin/fgetty"
But the /sbin/fgetty is there...
Can someone help me with this problems?
Thanks!

1: /usr/sbin/crond[469]: (CRON) INFO (Syslog will be used instead of sendmail.): Datei oder Verzeichnis nicht gefunden
But I do not ever install sendmail ...
That is just telling you that syslog will be used instead of sendmail, because there is no sendmail program to use on the system.
2: kernel: [ 6.146484] sdhci-pci 0000:02:00.1: Invalid iomem size. You may experience problems.
Does your sd card reader work properly? I use to get that error before I noticed it did not work. I fixed it by adding this to modprobe.conf
options sdhci debug_quirks=0x40
Not really sure on the other two as I try to avoid nouveau use personally and have never seen that intel related error on mine either and have not done fgetty on my systems.
Hope that gets you some place
Last edited by vwyodajl (2012-02-20 19:09:34)

Intel log errors in Xorg.0.log

Similar Messages

Maybe you are looking for