Error on Intel no error on PPC

I am developing a cocoa core data document program on both a MacBook (intel) and a mac mini (ppc). On the PPC, the project compiles and runs fine, but on the Intel, it compiles fine, but at runtime I get the following error.
2007-05-07 14:54:19.942 myProgram[5361] * -[NSBundle load]: Error loading code /Library/InputManagers/SIMBL/SIMBL.bundle/Contents/MacOS/SIMBL for bundle /Library/InputManagers/SIMBL/SIMBL.bundle, error code 2 (link edit error code 0, error number 0 ())
The error does not prevent it from running. In fact it does not seem to affect the functioning of the program at all. But I would like to know what is causing this error to show up and how to fix it. In case it might be relevant: each of the two projects (PPC and Intel) includes a framework that I wrote (so that my custom view would have a data binding in Interface Builder). The custom view appears to work with both versions.
Any ideas about what could be causing the problem and how to fix it? Thank you in advance.
I am using Xcode 2.4.1.

You have an outdated version of SIMBL that is not Univeral Binary. If you get the latest version or just remove SIMBL, the error should go away.
Developers should be careful with 3rd party system additions.They can introduce errors or hide them.

Similar Messages

Error in Intel Rapid Storage Technology "Reset to normal"

Hi,
My Notebook is HP Envy 17 3D
OS: Windows 7 Home 64 bit
When I start the pc I got an error in my hard disk raid system. but when i choose continue, then i can access my windows do any thing but I have to open the Intel Rapid Storage Technology and I see an alert on my hard disk and then I have to click on 'Reset to normal"
I am facing slowness in my pc.

Hey there gykdbk,
The ExpressCache software on the SSD is designed to improve overall system performance and greatly speed up Windows PC startup, application launches and data access. Further information regarding ExpressCache can be at this knowledgebase article. For this software to work, you do no need the Intel Rapid Storage Technology driver installed. When running the command eccmd.exe -info I assume you are finding this software is running as per normal, and you are not recieving any error messages, such as ERROR** ECCmd Request device is not available. However, if you do encounter this software not working as per normal there are some instructions here to uninstall and reinstall this software. I hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

RW-50010: Error, RC-50004: Fatal: Error occurred in App and exit_code=139

I am installing R12 on Oracle Enterprise Linux and gettiing above errors.
++++++++ Platform++++++
(I) OS: OEL 4 64-bit update 7 ( installed from DVD if that matters)
[root@arun2 vmware]# uname -a
Linux arun2.devar.com 2.6.9-78.0.0.0.1.ELsmp #1 SMP Fri Jul 25 16:04:35 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
[root@arun2 vmware]# more /etc/redhat-release
Enterprise Linux Enterprise Linux AS release 4 (October Update 7)
(II) Apps: R12 64-bit (latest available on web released on Jan 13, 2009)
[root@arun2 rapidwiz]# ./RapidWizVersion
Oracle Applications Rapid Install Wizard
Version 12.0.4.6
(c) Copyright 2000-2006 Oracle Corporation. All rights reserved.
(III)H/W: Dell(insiron 530) Intel quad core with 6GB RAM 1TB disk
+++++++ rapidwiz+++++
1) Downloaded x86-64bit ebusiness suit from oracle site
2) unzipped all packages
3) installed recommend Linux rpms
[root@arun2 vmware]# more /tmp/orarpm.2.sh
rpm -Uvh binutils-2.15.92.0.2-25.x86_64.rpm
rpm -Uvh compat-db-4.1.25-9.i386.rpm
rpm -Uvh compat-db-4.1.25-9.x86_64.rpm
rpm -Uvh control-center-2.8.0-12.rhel4.5.x86_64.rpm
rpm -Uvh gcc-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh gcc-c++-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh glibc-2.3.4-2.41.i686.rpm
rpm -Uvh glibc-2.3.4-2.41.x86_64.rpm
rpm -Uvh glibc-devel-2.3.4-2.41.i386.rpm
rpm -Uvh glibc-devel-2.3.4-2.41.x86_64.rpm
rpm -Uvh glibc-common-2.3.4-2.41.x86_64.rpm
rpm -Uvh gnome-libs-1.4.1.2.90-44.2.x86_64.rpm
rpm -Uvh libstdc++-3.4.6-10.0.1.i386.rpm
rpm -Uvh libstdc++-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh libstdc++-devel-3.4.6-10.0.1.i386.rpm
rpm -Uvh libstdc++-devel-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh libgcc-3.4.6-10.0.1.i386.rpm
rpm -Uvh libgcc-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh make-3.80-7.EL4.x86_64.rpm
rpm -Uvh pdksh-5.2.14-30.6.x86_64.rpm
rpm -Uvh setarch-1.6-1.x86_64.rpm
rpm -Uvh sysstat-5.0.5-19.el4.x86_64.rpm
rpm -Uvh xscreensaver-4.18-5.rhel4.14.0.1.x86_64.rpm
rpm -Uvh openmotif21-2.1.30-11.0.1.RHEL4.6.i386.rpm
rpm -Uvh libaio-0.3.105-2.x86_64.rpm
rpm -Uvh libaio-0.3.105-2.i386.rpm
rpm -Uvh libaio-devel-0.3.105-2.x86_64.rpm
Note: some of them were already applied.
4) Changed /etc/sysctl.conf
kernel.shmmax=3221225472
net.ipv4.ip_local_port_range = 2024 65000
kernel.semmsl=256
kernel.semmns=32000
kernel.semopm=100
kernel.semmni=142
kernel.shmall=2097152
kernel.shmmni=4096
kernel.msgmax=8192
kernel.msgmnb=65535
kernel.msgmni=2878
fs.file-max=65536
net.core.rmem_default=262144
net.core.rmem_max=262144
net.core.wmem_default=262144
net.core.wmem_max=262144
Note: rebooted the server couple of times
5) /etc/hosts entry
[root@arun2 vmware]# more /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.2.5 arun2.devar.com arun2
6) openmotif:
[root@arun2 vmware]# rpm -qa| grep openm
openmotif-2.2.3-10.2.el4
openmotif-devel-2.2.3-10.2.el4
openmpi-libs-1.2.5-5.el4
openmotif-2.2.3-10.2.el4
openmotif21-2.1.30-11.0.1.RHEL4.6
7) added couple of params to /etc/resolv.conf
options attempts:5
options timeout:15
8) Another hostname file
[root@arun2 rapidwiz]# more /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=arun2.devar.com
9) there is no file called /etc/sysconfig/networking/profiles/default/network
[root@arun2 rapidwiz]# ls -l /etc/sysconfig/networking/profiles/default/network
ls: /etc/sysconfig/networking/profiles/default/network: No such file or directory
10) soft and all in /etc/security/limits.conf
# Added for Oracle
hard nofile 65535
soft nofile 4096
hard nproc 16384
soft nproc 2047
11) It fails at 33% of steps 2
12) I find most binaries are crashing. ldd command on binary doesn't show anything is missing.
13) file on libraries looks like this
[oracle6@arun2 ~]$ file /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1
/d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
/d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
It become challenging and frustrating for me. I am really exhausted. Any help would be greately appreciated.
Regards
-Arun
PS: snip of log file:
(a)
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for MARS6 instance
ADX Database Utility
(b) tail -30
/d01/oracle6/MARS6/db/tech_st/10.2.0/appsutil/log/MARS6_arun2/ApplyDatabase_02021441.log
Executable : /d01/oracle6/MARS6/db/tech_st/10.2.0/bin/sqlplus
The log information will be written to
/d01/oracle6/MARS6/db/tech_st/10.2.0/appsutil/log/MARS6_arun2/adcrdb_MARS6.txt
Creating the control file for MARS6_arun2 database ...
exit_code=139
Checking for errors ...
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : arun2
sDbDomain : devar.com
sDbPort : 1537
sDbSid : MARS6
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@arun2.devar.com:1537:MARS6
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1537))(CONNECT_DATA=(SERVICE_NAME=MARS6)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1537))(CONNECT_DATA=(SERVICE_NAME=MARS6.devar.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase

Thanks, appreciate your reply. As I mentioned earlier, binaries are crashing. (side note: I am on 10th attempt, so SID=MARS10)
1) There is a connection issue, not sure why.
2) I see, something cored. .... adcrdb.sh: line 107: 30881 Segmentation fault sqlplus /nolog......(full text below)
3) ldd on sqlplus in case required
[oracle6@arun2 bin]$ ldd sqlplus
     libsqlplus.so => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so (0x0000002a95557000)
     libclntsh.so.10.1 => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1 (0x0000002a9574a000)
     libnnz10.so => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libnnz10.so (0x0000002a96ae6000)
     libdl.so.2 => /lib64/libdl.so.2 (0x00000039f7200000)
     libm.so.6 => /lib64/tls/libm.so.6 (0x00000039f7000000)
     libpthread.so.0 => /lib64/tls/libpthread.so.0 (0x00000039f7a00000)
     libnsl.so.1 => /lib64/libnsl.so.1 (0x00000039feb00000)
     libc.so.6 => /lib64/tls/libc.so.6 (0x00000039f6d00000)
     /lib64/ld-linux-x86-64.so.2 (0x00000039f6b00000)
4) last part of $ORACLE_HOME/appsutil/log/MARS10_arun2/ApplyDatabase_02061554.log
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : arun2
sDbDomain : devar.com
sDbPort : 1541
sDbSid : MARS10
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@arun2.devar.com:1541:MARS10
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=MARS10)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=MARS10.devar.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Fri Feb 6 15:54:57 EST 2009
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle6/MARS10/db/tech_st/10.2.0
ORACLE_SID : MARS10
TWO_TASK :
PATH : /d01/oracle6/MARS10/db/tech_st/10.2.0/perl/bin:/d01/oracle6/MARS10/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/softwares/appsr12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /d01/oracle6/MARS10/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle6/MARS10/db/tech_st/10.2.0/lib:/usr/dt/lib:/d01/oracle6/MARS10/db/tech_st/10.2.0/ctx/lib
Executable : /d01/oracle6/MARS10/db/tech_st/10.2.0/bin/sqlplus
The log information will be written to
     /d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/log/MARS10_arun2/adcrdb_MARS10.txt
Creating the control file for MARS10_arun2 database ...
exit_code=139
Checking for errors ...
.end std out.
/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/install/MARS10_arun2/adcrdb.sh: line 107: 30881 Segmentation fault sqlplus /nolog @/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/install/MARS10_arun2/adcrdbclone.sql "so" "$S_RDBMS_VERS"
egrep: /d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/log/MARS10_arun2/adcrdb_MARS10.txt: No such file or directory
.end err out.
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase

Error compiling movie: unknown error & Mercury Playback GPU acceleration

Hardware
2014 Mac Pro, 12GB RAM, 3.7 GHz Quad-Core Intel Xenon ES Processor, duel AMD FirePro D300 2048 MB graphics cards
Software
Mavericks (10.9.4)
Premiere Pro CC2014 (8.0.1)
I'm attempting to render out a moderately complex sequence. Raw footage was dslr h.264 MOV files. 30fps 1920x1080 from canon. It has some clips that are pulled from multi-cam sequences and a few that have warp stabilizer applied. 4 total audio tracks with some linked comps from audition. Whole thing is about 14 minutes. It should be noted that I render out similar sequences regularly without issue. However on this occasion whenever I tried to render out using media encoder ( for web h.264 MOV 720 30fps) I was getting an error at the same clip every time. Error Compiling Movie: Unknown Error. So I checked out the clip. It was one of the ones with warp stabilize. I turned that off and sent it out again. Render got further this time but hit a different clip with warp stabilize (after getting through like 2 other clips with warp stabilize enabled) and gave me the same error. I tried getting rid of cache files, saving to a local drive instead of a network drive, uninstalling and re-installing premiere even. (which btw if you check remove preferences then reinstall it def still has preferences so that's a total load.) Anyway I was doing some forum surfing and found several people going all the way back to PP 5.5 saying that the only solution they found was to turn off the Mercury Playback GPU acceleration. Tried that and it's currently rendering just fine but taking roughly 4X longer than with acceleration. The GPU acceleration is a big deal for me since our company relies on putting out a lot of volume quickly. Has anyone else experienced this problem and is it something you were able to fix without turning off GPU acceleration. Grateful for your input.

sorry I actually wrote that wrong. I am using the H.264 setting 720 30fps to create a web friendly .mp4. Alternately though I decided to watch and see if it was the same clip failing every time. It is. I went into the project and did a match frame for the offending clip. Dragged the a new version of the same content onto the timeline and copied the warp stabilize effect onto the new version. Well this time the encode got past the clip with the issue, however the next clip it hit with warp stabilize caused another error compiling movie: unknown error. I guess at this point my options are to turn off the GPU acceleration and wait for a render that takes more than 3x as long to render with software only, or to go through the whole timeline and replace the clips with warp stabilize (there are a bunch, the shooter wasn't having a great day on glidecam). Not a great solution on either end. Please let me know if I should file this as a bug report. Though it seems people have been having the same issues since version CS5.5

I get an error message saying 'An error has caused Photoshop to stop working correctly. Windows will close the programme and notify you if a solution is available'. I have had no notification. My old Photoshop CS5 works fine, but as I'm paying for CC2014

I get an error message saying 'An error has caused Photoshop to stop working correctly. Windows will close the programme and notify you if a solution is available'. I have had no notification. My old Photoshop CS5 works fine, but as I'm paying for CC2014 I would like to use it. I have tried renaming the 'sniffer' file to 'snifferold' as bobmiller4002 suggested but the problem is not resolved. Lightroom works fine.

Hi Nancy,
             I'm not sure I have the answers to all your questions. Although I use Photoshop and Lightroom extensively, I'm not a 'techy'.
My system;
Packard bell imedia S2885
1TB hard drive
500G RAM
Windows 8.1   64- bit
Intel core i5 4440
If I open Photoshop cc14 without opening any image, I still get an error message that reads: 'Photoshop has encountered a problem with the display driver, and has temporarily disabled enhancements which use the graphics hardware'.
There is also a link to the Adobe help site, but I'm not sure exactly what I should be downloading from there.
         Thanks,
                    Dan.

Get error msg. "Configuration error" AGP Graphics Card

I recently purchased a MacBook Pro 17". I migrated my software from my old computer, but when I tried to open Final Cut Express HD, I got an error message saying Configuration Error "AGP Graphics Card." When I went to the support site, it indicated that I needed to download an update. I did that, but the install indicated that I was already updated and current. What can I do?

You are in the Final Cut Pro forum and find more focused help over in the FCExpress forum.
That said, usually these messages arise when you are installing an older, non-intel version of the software on an intel machine.
You can not update it, you need to purchase the upgrade to the current Universal Binary (aka intel ready) version of the software for it to run properly.
Good luck,
x

Premier CS6 - Error Compiling Movie, Unknown Error

Hello all,
I am cutting Red 4k feature movie right now -- and everytime I try to export for preview for my director, it crashes in random time - 2sec, 4,sec, 22 sec, 13sec, all over the place.
And it says Error Compiling MOvie, Unknown Error.
I am getting so annoyed now - because there is no answer for this! Can anybody please help?
My computer is
Model Name:
Mac Pro
Model Identifier:
MacPro3,1
Processor Name:
Quad-Core Intel Xeon
Processor Speed:
3.2 GHz
Number Of Processors:
2
Total Number Of Cores:
8
L2 Cache (per processor):
12 MB
Memory:
12 GB
Bus Speed:
1.6 GHz
And I'm cutting Red 4k files.
Thank you in advance!

What are you exporting to?

Cannot export (error compiling movie, unknown error)

Hi all,
I'm running Premiere Pro 2.0, and I really need to export this vid for a project. EVERY SINGLE TIME it will not export. I always get the same error: 'Error compiling movie (unknown error)'. My graphics drivers are up to date, I have enough disk space, and my scratch disks are set to the right places. I tried Quicktime, AVI, compressed AVI, all at many different resolutions. Has any one else had this problem? If so, is there a solution?
BTW I'm running an Intel Core 2 Quad with 4 gigs of RAM.
Thanks.

Error Compiling Movie... some past discussions and ideas
-http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
-http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
-and nested sequences http://forums.adobe.com/thread/955172
-and WMV files frame rate http://forums.adobe.com/message/4629210

GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown error

I recently updated my system and now it giving me an error:
GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.cinnamon.SettingsDaemon was not provided by any .service files
How can I easily start troubleshooting this issue?
Pacman.log: http://pastebin.com/BRRmuWPV
I've got an IBM T520 laptop with built-in i915:
[blah@blah ~]$ lspci -v -s `lspci | awk '/VGA/{print $1}'`
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 21cf
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 5000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
[blah@blah ~]$
Any help would be appreciated
Last edited by Anoniem (2015-02-09 13:02:53)

Anoniem wrote:
Haha, well:
1. I turn on laptop
2. Login into my desktop
3. My display is low resolution and external display too, fonts and theme settings are gone (gnome)
4. I want to change resolution
5. Get error message like above
Checked my logs, tried reverting packages I updated
Still the same GDBUS thing.
Maybe there is an conflict when the X starts on 2 monitors with 2 different resolutions...
It depends from your graphic card. For example, on my nvidia when X starts with both internal and external monitors plugged in, the resolution is messed up. But when you enter to your desktop, usually it reads the last resolution states and the screen resolution problem if fixed.
One solution is to plug the external monitor after desktop is loaded or create a config file for the monitors on the /etc/X11/... folder Xorg wiki
Last edited by alex.theoto (2014-12-05 17:18:11)

Error Msg. "Configuration Error AGP Graphics Card"

I recently purchased a MacBook Pro 17". I migrated my software from my old computer, but when I tried to open Final Cut Express HD, I got an error message saying Configuration Error "AGP Graphics Card." I reinstalled my original disk but got the same error message. When I went to the support site, it indicated for that error message that I needed to download an update. I did that, but the install indicated that I was already updated and current. What can I do?

Try hitting the esc key whenever you get the message.
You are probably using FCE 3.0 which was not designed to run on Intel Macs.

Why am I getting BHO.DLL error followed by IE3SH error?

I have a HP G60-235DX Notebook PC with Windows Vista 32-bit and keep getting this when starting it up.... BHO.DLL Error followed by IE3SH Error,,,, HELP!! Please and many thanks!! Is there a reason this is being viewed but not answered?

drsbfl wrote:
I have a HP G60-235DX Notebook PC with Windows Vista 32-bit and keep getting this when starting it up.... BHO.DLL Error followed by IE3SH Error,,,, HELP!! Please and many thanks!! Is there a reason this is being viewed but not answered?
Hi,
It looks like your laptop has been infected by some spyware. BHO is a some kind of advertising program so I would suggest to go to the safe mode and restore to some previous point or perform the factory reset using recovery disks..
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

FATAL: Error inserting i915 xorg error, eee pc 1000h

Kernel version 2.6.30. Trying to install X on an eee pc 1000h. When I run xinit (using an xorg.conf autogenerated by X -configure), I get
FATAL: Error inserting i915 (/lib/modules/2.6.30-ARCH/kernel/drivers/gpu/drm/i915/i915.ko): Unknown symbol in module, or unknown parameter (see dmesg)
In short, exactly the same error as this guy is getting: http://bugs.archlinux.org/task/13968
except that I'm on kernel .30 and he's using .29.
That bug report was resolved as not a bug, since apparantly the problem gets fixed as soon as you run 'depmod -a'. Well, I tried running depmod -a, and I still get the same FATAL error when I try to start X.
If I try to run X without an xorg.conf, I get the same error, plus an additional error (EE) Failed to load module "i810" (module does not exist, 0). So that won't solve anything. Any ideas?

I have the same problem with my desktop VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller
and kernel Linux arch 2.6.30-ARCH
then i compile vanilla 2.6.31_rc5 kernel and i915 module have loaded successfully
Last edited by rovic (2009-08-13 09:15:57)

Web-Disk on OSX 10.9 Give me this error: "Finder got an error: Network file permission error."

Previously I was using OSX 10.8 and Web Disk was working great.
Since I upgraded to OSX 10.9 Web Disk Dont Attach to my compputer and give me this ERROR:
FInder got an error: Network file permission error.
When I got this ERROR first time I searched GOOGLE and found this link: http://cammodude.blogspot.no/
And I did:
To force all connections to be SMB1:
Open A terminal window
paste in the following line followed by the return key(should be all on one line):
echo "[default]" >> ~/Library/Preferences/nsmb.conf; echo "smb_neg=smb1_only" >> ~/Library/Preferences/nsmb.conf
What the command does:
Creates a file called nsmb.conf in your home directory at the path ~/Library/Preferences/nsmb.conf.
Adds directives to force SMB connections to use the SMB1 protocol. This is slower but stable.
Then I could use Web Disk on OSX 10.9 after executing this command in Terminal.
But now I restarted my Macbook and now Im NOT able to connect to Web Disk and get the same ERROR.
FInder got an error: Network file permission error
After trying 100 times it attaches 1 time but then show this ERROR:
Can't get <<class cdis>> "my.server.com/2078" of application "Finder".
If this happen then I can see the files in Finder and see the Contents and Size of files but if I open a PHP file in BBEdit then it shows BLANK.. But actually it is NOT blank.
Now Im stuck How can I solve this? All help is highly appericated..
Thank you so much...

Hi,
Make sure to chmod the app, something like this :
chmod -Rf 777 secure_site_WebDisk.app
(in my case the CPanel provided the app for my OSx version.)

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

Error 500--Internal Server Error while opening a taskflow in inline popup

Hi,
I am getting "Error 500--Internal Server Error" while opening a bounded taskflow as a popup from another bounded taskflow containing page fragments. The popup taskflow contains jspx pages. I even removed the jspx pages from the popup taskflow to check if the error is resulting from the bindings on the pages but still I get the same error. The entire stack trace of the error in the popup dialog is :
Error 500--Internal Server Error
oracle.adf.controller.ControllerException: ADFC-04008: The BindingContext on the session is null.
     at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:208)
     at oracle.adfinternal.controller.util.model.AdfmUtil.getBindingContext(AdfmUtil.java:47)
     at oracle.adfinternal.controller.util.model.DCFrameImpl.makeCurrent(DCFrameImpl.java:125)
     at oracle.adfinternal.controller.state.ViewPortContextImpl.makeCurrent(ViewPortContextImpl.java:1006)
     at oracle.adfinternal.controller.state.RequestState.setCurrentViewPortContext(RequestState.java:159)
     at oracle.adfinternal.controller.state.ControllerState.setRequestState(ControllerState.java:900)
     at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart1(ControllerState.java:355)
     at oracle.adfinternal.controller.application.SyncNavigationStateListener.beforePhase(SyncNavigationStateListener.java:105)
     at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:112)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:59)
     at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:258)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Any help is greatly appreciated.
Thanks,
KK

Hi Frank,
Thanks for the reply. I am using it as an inline popup. I am trying to create command links dynamically in an iterator. When a link is clicked a popup window opens. The text of the link is passed to the popup window by creating a variable in the session scope ( I even tried request scope) by an action listener in the backing bean.
I tried to create another simple application with a static command button which passes its text to popup window through a session scope variable. It worked fine. I am not sure why the same procedure is not working in my original application. Can you give me a hint what could possibly go wrong according the exception stack trace ?
Thanks,
KK

Error on Intel no error on PPC

Similar Messages

Maybe you are looking for