Intellegent F4 help for contacts in Opp

Hello All,
We have the following issue and I hope to get answere from someone. In PCUI on Opportunities Partner Tab when we select contact person Partner Function and click on partner Input Help link it opens a BP search window and user can pick any BP or contact from search result. How can we return only those contacts belonging to the Sales Prospect entered in Opp. Sales Prospect is mandatory for us while creating an Opp. We want to make contact person input help intellegent to return only those for the BP in transaction.
Thanks inadvance

There is new feature in CRM 5.0 for value help applications in PC-UI. Its called context sensitive value help. Check the section 5.1.3.7 in the PC-UI cookbook for version 5.0.
I am coping the section 5.1.3.7 here:
5.1.3.7 Context sensitive value help
The current complex value help is not fully context sensitive. It does not consider the information
the user has already entered on the screen, If it is present in different screen position or in different
line of a list than the field on which F4 is pressed. Thus, the value help often displays result set
which are not related in the current context. To make value help context sensitive following points
must be improved.
The complex value help must consider the entries of relevant fields on the calling applications screen as search criteria.
The value help application should be enabled to set the value in the Search-Shuffler depending on the current context.
To implement this feature for any field in the fieldgroup following steps to be performed:
1. New fieldgroup customizing flag is added the by checking this enables context sensitive search for a input field. Field group customizing is called Roundtrip CS Search.
2. Determine the fields to be transferred to the value help application from calling application
and create ABAP structure from this fields.This structure is called Context sensitive screenstructure (CS structure). Assign this CS structure to the complex value help application which is associated with the input field. This is done in:Transaction crmc_blueprint_c
Open the node Application/Layout node
Edit the value help application
Enter the name of the structure in the filed Structure name, Field (F4_CS_STRUCTURE)
3. PC-UI FW takes the CS structure data from the calling application and defaults them in the value help applications advance search screen structure. Include this CS structure to the advanced screen structure of value help application to have the same fields of CS structure and add the corresponding fields for the CS structure to field group of advance search. This is generally the scrreen structure used in the adv search of value help application.
4. Implement IF_CRM_BSP_MODEL_ACCESS_IL_2~FILL_F4_STRUCTURE in the calling applications Model Access Class. In this method you fill the value in CS structure which will
be passed to the value help application.
Fill the data which is to be passed to the value help application.
5. Implement / or enhance if already implemented
IF_CRM_BSP_MODEL_ACCESS_IL_2~CHECK_ACTIVE_SHUFFLER in value help applications MAC. This step is optional, With this you will be able to select the correct
shuffler based on the context sensitive data passed with new import parameters values to
this method.
data in the adv search screen structure based on the cs-data passed to the application to refine their search criteria. In this field they can return the name and value pair table. FW will update SS with this values.
6. CS screen structure should have field called "ERROR_FLAG" with component type
CRMT_BSP_F4_CSERROR. When a wrong value is entered in input field and context
sensitive value help is called, Applications can use this flag to inform FW that wrong data is
present in the field and FW will add an error message to the application log of value help to
tell the user that there is wrong data.
Raj

Similar Messages

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

I have a charge on my itunes account that I did not authorize. Finding help for this type of problem from Apple or itunes is impossible. Who do I contact to get this charge taken off my account?

My checking account was debited by itunes for a subscription i did not order. How do I go about having it taken off? The entire Apple website and the itunes website is competely non-helpful for resolving problems. They should make their site equally as unfriendly when it comes to enticing you to buy their products.

You could simply type "Contact itunes support" into the google search bar. This would give you the link to contact itunes support.
Or you could just click the word Support at the top of this page, then click the link under Contact Apple Support.

Need help in creating documents for Contacts in Oracle HRMS

We are trying to add documents to Contacts in Oracle HRMS. (11.5.10.2)
Navigation: Oracle HR Super User -> Fastpath -> Documents of Record
Search for a Contact -> Manage Documents of Record -> Create Document of Record.
In Document Information -> Type is mandatory field but the LOV is not returning any values.
The LOV works fine for both system defined and custom document types when trying to create documents for Employees or External Contractors.
But we would need to be able to add documents for Contacts also.
Please let us know if this expected functionality or if there is any setup that is needed.
Any help in this regard is highly appreciated.
Thanks,
Kiranmayi.

We are trying to add documents to Contacts in Oracle HRMS. (11.5.10.2)
Navigation: Oracle HR Super User -> Fastpath -> Documents of Record
Search for a Contact -> Manage Documents of Record -> Create Document of Record.
In Document Information -> Type is mandatory field but the LOV is not returning any values.
The LOV works fine for both system defined and custom document types when trying to create documents for Employees or External Contractors.
But we would need to be able to add documents for Contacts also.
Please let us know if this expected functionality or if there is any setup that is needed.
Any help in this regard is highly appreciated.
Thanks,
Kiranmayi.

Problem in search help view for Contact (BP_CONT_SEARCH)

Hi,
I am trying to create service order. There I have 2 fields ... Sold-to-Party and Contact.
when I say F4 for Contact it is displaying the next screen with 4 parameters. There I have Account ID paramater.
In the CRM 6.0, the Account ID is being populated with Sold-to-Party ID, by default.
But, Now I am working in CRM 7.0. The Account id is not defaulting to Sold-to-Party ID.
And I observed that in CRM 6.0, all the fields on Serch help view are binded to SEARCH->VALUE1 attribute.
But, In CRM 7.0, this is not done. I donno whthr it might be the reason..or som thing else.
Please let me know, for defaulting this value, what we need to.
Thanks,
Sandeep

Hi,
I am trying to create service order. There I have 2 fields ... Sold-to-Party and Contact.
when I say F4 for Contact it is displaying the next screen with 4 parameters. There I have Account ID paramater.
In the CRM 6.0, the Account ID is being populated with Sold-to-Party ID, by default.
But, Now I am working in CRM 7.0. The Account id is not defaulting to Sold-to-Party ID.
And I observed that in CRM 6.0, all the fields on Serch help view are binded to SEARCH->VALUE1 attribute.
But, In CRM 7.0, this is not done. I donno whthr it might be the reason..or som thing else.
Please let me know, for defaulting this value, what we need to.
Thanks,
Sandeep

Some contacts have disappeared from my phone contacts. They are still in the phone because if someone calls me their name appears and if i search in text for contacts they are still there - but if i search in phone contacts they are not there, Help

Some contacts have disappeared from my phone. Not all just random ones. They are still in the phone because if someone (who has disappeared from my phone contacts calls me their name appears and if i search in text messages for contacts they are still there - but if i search in phone contacts they are not there, Help!

But once again, I do not want to lose my other texts, app progress, and photos. I could sync the photos but i would still lose the app progress and texts. I would only restore if it was the only option left, but the other space, as already stated, isnt the main concern. The main concern is those 'deleted' texts. If they go, then a good size chunk of the other space goes. I know you CAN delete texts for good. It worked fine before. All i want to know is why its not working for me now, and how to fix it.
I also know that when you delete texts on your iphone, they get marked for deletion, however they stay on your device (thats why they show up when you search for them.) then when you sync your device with itunes, the texts marked for deletion should disappear. When i synced they didnt disappear. Thats what i need an explanation/solution for. Why the texts marked for deletion didnt get fully deleted after the sync.

"Inconsistencies in your sync information for Contacts..." HELP!

Hello helpful smart people!
I can't sync Contacts on my iMac in my kitchen with my office MacPro. I am running OS 10.4.11 on both computers. I keep getting this message: "Inconsistencies in your sync information for Contacts were detected and have been repaired". But Contacts are still not being synced on my kitchen iMac. I have checked my .Mac account and see all the correct info in the Contacts folder - which matches my office MacPro. I have both Unregistered, and Reset Sync Data on the Kitchen iMac and asked that all Sync Info be replaced on the Kitchen iMac with Sync info from .Mac. Can anyone figure this out? Thanks very much for any help you can lend. -Scott

This is the iSync forum. iSync is for syncing to non-Apple mobile phones only, not to other Macs.
Try asking in the *MobileMe Sync* forum: http://discussions.apple.com/forum.jspa?forumID=957

Excuse me, but I don't understand How I can contact a ADOBE expert to ask about my problem? I don't found a mail, or chat or other else...is it possible? Only help for Customer is on the Forum?!?!?

Excuse me, but I don't understand How I can contact a ADOBE expert to ask about my problem? I don't found a mail, or chat or other else...is it possible? Only help for Customer is on the Forum?!?!?
Someone can help me...thanks in advance.
f

While it is possible you have a faulty unit I'd agree that the menu system took a step backwards with the itunes store centric take 2.0+ software. I think I'm in the minority here though. Apart from the 2.0+ top level interface being butt ugly and confusing to navigate, it simply isn't as responsive as 1.0/1.1 and I think most of this is to do with displaying a combined sync/stream menu. if you sync stuff try setting 'show only synced items' in the AppleTv device tabs in iTunes and see if it makes the issue go away - easy to revert back.
Huge libraries (number of files not actual size of the files) can also be problematic given AppleTV's modest hardware specs but that's more exception than the rule.
With streaming/syncing combined I also think any network deficiencies show up more than they used to.

Help needed to generate new target group for contacts from BP Target Group

In CRM 5.0, we have a functionality in which say we have created a target group (T1) for 10 BPu2019s (organization) and each of these BPu2019s have one or more contact persons associated to them. Now if I want to create a target group for all these contact persons associated to the 10 BPu2019s, in CRM 5.0 I have the option to right click on the target group (T1) and then I get an option u201C generate new target group from contactsu201D. By doing so another target group for all the contacts associated to those BPu2019s will be generated. I am not able to find out the similar option in CRM 2007 (web UI) where in I can create target group for contacts associated to BPu2019s (organization). There should be some work around for this requirement.
Please let me know how to achieve this requirement.
Thanks,
udaya

Hi udaya,
we're also using that functionality in CRM 5.0. I think it would be worth a combined OSS message to get this functionality back in standard if it isn't there.
Best regards
Gregor

Please Help!! Images for Contacts

How do I go about getting the contact images to display on my ipod? I have set all images in my Address book, but they don't come over when I sync my contacts. How do I get the images of each individual contact to display in my contacts???

You need to upgrade to Mac OSX 10.4.3 in order to get photos for contacts.
http://docs.info.apple.com/article.html?artnum=302493

How to force a "push" for contacts sync?

In Settings, I use my MobileMe account ONLY for contacts, calendars, and bookmarks, not for e-mail.
I have Fetch New Data set to Push, then Push set to Manually, then in Advanced, my e-mail accounts are set to Fetch (i.e. it'll update my mail only when I launch the Mail app) and my MobileMe account set to Push (i.e. I'd like them to be pushed to the phone).
However, no contacts seem to get pushed to the phone. It's confusing as to how I'm supposed to initiate a manual push. Launching Contacts doesn't update the contacts.
I don't particularly want to set Push to every 15 or 30 minutes, because I don't want to drain battery life. I'd be happy if it sync'ed once a day, but right now it's not syncing at all.
Can someone help me understand how "push" and "manually" work (since there is no "force push right now" button anywhere) and how I can keep my contacts on my iPhone updated regularly automatically?
Should I set MobileMe to Fetch? So that, as in when I launch Mail it updates the mail, when I launch Contacts it will update the Contacts? That would be good enough for me.
(Also, this entire post is about downloading contacts from MobileMe, but I'd also like to make sure the reverse works too -- that if I add a contact or calendar date to my iPhone, it gets synced with MobileMe and later appears on my desktop machine.)

Huh. Mine it does happen automatically, both ways.
On the phone, Settings, Mail, Mobile Me account--do you have to set to sync contacts, calendar and bookmarks? Those can be turned off individually (this is in the account detail itself, not under the Fetch/Push setting screen.)
On the computer, System Preferences, Mobile Me, do you have it set to sync automatically?
When I see things not syncing, I generally force a sync from the computer, figuring that triggers the server and so on down the line to the phone.

Two iphones sharing same itunes account... Help with contacts merging!!

Hello all,
Well my hubby and I are loving our iPhones but I have a few questions.
I already had an iTunes account for my iPod way before we had our iPhones. Because of this we both share the same account.
Well where my concerns are is our contacts. I have sync our phones using the icloud and our contacts have merged. I have even tried to use 2 seperate itunes log ins but this doesn'e seem to work.
One phone is iphone 4 other 4s
Can someone please help????

you can keep the same apple id for purchases like apps and music, but you need to create separate icloud accounts for contacts and so on. after you do this you may need to redo your contacts on each phone.
http://www.apple.com/icloud/setup/ios.html

Outlook 2013 with Exchange Server - Changed custom form for contacts is not shown

Hello,
Our infrastructure:
Exchange Server 2010
Outlook 2010
Outlook 2013
Windows 7 Pro, Windows 8 Pro and Windows 8.1 Pro
The situation:
We've used an old custom form for contacts, worked perfectly fine
I've updated the form (adding some new custom fields and checkboxes) using Outlook 2013 and publishing the form (with a new name) to the Exchange folder
I've set the form as default form in our contacts folder
I've used this Script to set the new form for the existing contacts and the name of the new form is saved correctly
BUT if I open a contact in our Exchange contacts folder, Outlook 2013 (Outlook 2010) still shows the old form
Steps I've taken so far:
Cleared Outlook forms cache
Repeated the above steps 1-4 in Outlook 2010
Switched Cached Exchange Mode off and back on
Allowed Scripts in Trust Center Settings
Used a new clean Windows installation with a new Outlook 2013 installation
Used different Exchange users on different systems, but some behavior when opening contacts
I'm out of options I can think of, so maybe somebody else has some new view on this problem.
Thank you very much in advance!
Greetings,
Karl

Hi,
Is the Exchange folder in which the custom form is published available to all users?
From the description, the script used to work for the old custom form, correct? Which version of Outlook did you use with the old custom contact form? Outlook 2010/Outlook 2013 or an earlier version? If you used the script with an earlier version of Outlook,
we can't make sure it will still work with Outlook 2010/Outlook 2013.
In addition we may also try creating a new contact form and test the steps to see if it will work.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Audigy 2 Tech support little help for n

Original Message Follows:
Subject: CLI - Technical Support Request
Self Description: ID(3) Advanced PC UserSupport Inquiry: ID() I am installing or using the product for the first timeProduct: Audigy 2 ZSOperating System: Windows 2000Creative Model Number: SB0240Computer Brand/Model: Home builtProcessor/CPU: P4 3.0ghzMemory: .024gigBIOS Type/Revision: Award Bios SPE000 Pro-G.ESystem Board/Chipset: GA-8IPE000/Intel 865PE Host/AGP/Controler ICH5 IO
Detailed Problem Description:I have recently made a purchase from e-bay form your company for Creative Sound Blaster Audigy 2 Sound Card http://cgi.ebay.com/ws/eBayISAPI.dll...92950&tc=photo I have install this product to go along with my Creative Labs Inspire P5800 5. speaker system. I am having the following problems.
. I can only get output from 2 speakers front left and front right.2. I cannot get my microphone to work at all. Its plugin to the proper port. It worked with the old sound card. It works on other pc's I have at my residence. So its not the microphone. I checked all the connections and they are correct. I have been to the knowledge base with no luck. I have been through the forums searching and the majority of the forum responses are users helping users with very little input from Creative labs. (disappointed)I have installed/un-installed/re-installed without any luck, the software that came on the cd. I have also retrieved the last software downloads from your web site without any luck.So either I am missing something here, or I got a defecti've sound card.
REPLY/Answers inline:
Jason, My answers are inline.
> Thank you for contacting Creative Technical Support. > With regards to the issue you are having, may I know the model and > serial number of the product you are having? It should start with CT or SB followed by 4 numbers >found on the sound card. As for the serial number, it can be found on the sticker and the ink stamp >which is printed on the back of the card. SB0240 > Below is a link that may help with the location of the model number. Thanks. Run a keyword search for > SID2456 from the link below.> http://us.creative.com//support/kb/> > For the 2 speakers output issue, may I know are you using digital or analog connection for your >speakers? I assume its an analog connection Creative Insprire P5800 as I don't have anything like a EAX control module that goes in between. Also I have no sound at all til I go to the speaker setting control panel andde-select digital output only.
I have 3 wire connection Green Line out (front) Black line out 2 (rear) and Orange line out 3 (center subwoofer) These connect from the back of the sound card directly into the subwoofer. Green (front) black (rear) orange (center subwoofer)
My old sound card RealTek`AC97 worked fine and I had sound in all my speakers. Yes I have removed the old card and un-installed the old drivers for it. Also the mircophone worked with the old sound card so I know thats not an issue. > Sorry for any inconvenience caused. > We'll need this information so that we can provide you with the correct remedy.
Reply/Answers Again Inline:
> May I know have you enabled CMSS?Yes I have this enabled, disabled and re-enabled to try and get this to work. > . Open MediaSource (Start, All Programs, Creative, Creative MediaSource, Creative MediaSource >Organizer).> 2. There should be an EAX button underneath the Record button at the bottom of the screen, towards >the left. Beside this button, there should be a small ellipsis button (. . .) that you can press. >Click on this. Doing this locks up my pc as soon as I hit the (....) tab. The pc spikes to 00% and the only thing I can do is hit the reset button on the pc to hard boot it. I have tried this several times with the same results. Note: I DO NOT have anything running in the background as anti virus programs and such. I don't even have anything like that installed on my pc. NOTE: I can press the EAX button itself to make it from high lighting green on the button to not high lighting green. This has had no effect on the problems I am having. > 3. Go to the CMSS 3D tab and check the box next to "Enable CMSS 3D" The only way I can get to this is by: Start>Program Files>Creative Media>Source>Creative Media Source Go, then the GO button>Product Settings>EAX Console. I have enabled, disabled and re-enable the CMSS 3D with no changes to my problem.> 4. Place a dot next to either CMSS or CMSS2. Whichever sounds better to you. I have tried CMSS and CMSS2, I have the same results with either enabled or even with CMSS 3D enabled or disabled. I only get sound out of 2 of my speakers. I know its not the speaker system (Creative Inspire P5800) because all the speakers worked with my old sound card. > It is important to remember that if you do wish to play a 5. encoded file, you will need to turn CMSS >off. Otherwise you might not receive each discreet channel. This has been Noted ref. to 5. encoded. But I would like to just play anything at this time and have all my speakers work.
> For your microphone, I wil need you to do a mic test.>CHOOSE THE RECORDING SOURCE> . Double click on the Windows Volume Control (generally on task bar) to load the mixer> 2. Go to Options > Properties > 3. Select adjust volume for: Recording, and hit OK> 4. Place a check mark under the proper recording source (Microphone) in the Recording Control box. Done, already checked this. And doubled checked it to make sure. > TEST RECORD THE AUDIO> . Go to Start > Programs > Accessories > Multimedia > Sound Recorder.> 2. Click the Record button (red dot)> 3. Talk into the microphone > 4. Let it record the source for a little bit> 5. Hit the Stop button (black square)> 6. Hit the Play button (single black arrow pointing right)> 7. You should now hear the audio that you recordedNo sound recorded what so ever. I tested 3 different mircophones and none worked. I ran this test on the two other pc's I have at my residence and the mircophones worked and windows recorded just fine. YesI have it plug into the proper slot. > Does it help?I wished it did. > Please get back to us on your findings. Thanks.
Reply/Answers inline:
Dear Creative Labs,DO YOU PEOPLE EVEN READ THE PRIOR CORESPONDCE FROM THE PRIOR E-MAILS SINCE YOU APPARENTLY HAVE MUTLITPLE PEOPLE WORKING THE SAME SUPPORT TICKETS.
I WILL REPLY IN ?CAPS? TO MAKE SURE YOU DON?T MISS ANYTHING THIS TIME??. MY REPLIES ARE INLINE AND IN CAPS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> Thanks for the reply. I need you to know that SB0240 is the Sound Blaster Audigy 2. AS STATED IN MY PRIOR E-MAIL YES IT IS AN AUDIGY 2 SOUND CARD SEE INFORMATION BELOW. Support Inquiry: ID() I am installing or using the product for the first timeProduct: Audigy 2Model: SB0240Blaster Audigy 2 Sound Card http://cgi.ebay.com/ws/eBayISAPI.dll...92950&tc=photo ARE WE CLEAR ON THIS NOW? > Please try the following cleansweep and re-installation procedure, to see if it works:-> . Click START / RUN / Type MSCONFIG and press ENTER. AS STATED BEFORE I AM RUNNING WINDOWS 2000 MSCONFIG.EXE DOES NOT COME WITH WINDOWS 2000 AS DEFAULT. SO TO MAKE SURE I FOLLOWED YOUR DIRECTIONS TO THE ?T? I WAS ABLE TO GET THE MSCONFIG.EXE MICROSOFT. THE COMMON USER WOULD NOT HAVE KNOWN THIS AS THEY WOULD HAVE TRIED ABOVE AND GOTTEN AN ERROR MSG THAT MSCONFIG COULD NOT BE FOUND. > 2. Insert a check to the left of SELECTIVE STARTUP and deselect 'LOAD STARTUP ITEMS'. DONE! > 3. Select the SERVICES tab and select HIDE ALL MICROSOFT SERVICES. DONE! > 4. Uncheck all results and click OK. DONE! > 5. Click OK and reboot when prompted. DONE! > 6. Enable the WINDOWS XP STARTUP MENU by rebooting your computer and tapping F8 once >every second OR holding the SHIFT key while rebooting. I AM RUNNING WINDOWS 2000 AS STATED BEFORE, IF YOUR GOING TO USE TEMPLATES MAKE SURE THEY REFER TO THE OPERATING SYSTEM THE USER HAS. BUT F8 STILL IS THE DEFAULT KEY TO GET TO THE WINDOWS 2000 STARTUP MENU. > 7. When the menu is displayed, select SAFE MODE and press ENTER. DONE! > 8. Once in SAFE MODE, insert the sound card's installation CD and exit out of the installer DONE! > 9. Click START / RUN. DONE! > 0. Type "X:\AUDIO\DRIVERS\CTZAPXX.EXE into the OPEN field (replace X with the applicable CD->ROM dri've letter). DONE! > . Click OK. DONE! > 2. When the CREATIVE DRIVER UPDATE UTILITY opens, select DRIVER UNINSTALLATION under >UPDATE OPTION. DONE! > 3. If two out of the three options are disabled or grayed out under DRIVER TYPE, click OK. >Otherwise, select WDM. You will then be prompted to reboot, but please do not do so. DONE! > 4. Click START / SETTINGS / CONTROL PANEL / ADD/REMOVE PROGRAMS. DONE! > 5. Remove all Creative SB Audigy 2 programs. DONE! > 6. Close all windows, and reboot the computer normally (ENTER NORMAL MODE). DONE! > 7. The Audigy 2 will be detected by Windows. Cancel the ADD NEW HARDWARE WIZARD when >able. DONE! > In order to install your soundcard properly, I recommend you to ensure the following for the audio >installation and test:
>- The card is the only card installed other than the Graphics card. THE ONLY CARDS THAT ARE INSTALLED ON MY PC ARE THE SOUNDCARD AND GRAPHICS CARD WHICH IS IN A APG SLOT. > - The card is at least one empty slot away from the Graphics card. THE CARD IS ON THE 3 SLOT FROM THE TOP AND SLOT FROM THE BOTTOM WITH NO OTHER CARDS INSTALLED. >- Place the soundcard away from all the others. NO OTHER CARDS ARE INSTALLED >- That the card is seated properly in the PCI slot. YES THE CARD IS PROPERLY SEATED THIS A BASIC A+ CERTIFICATION TASK >- Move the PC's internal wires away from the soundcard. NO WIRES ARE NEAR THE SOUND CARD I.E. POWER CONNECTORS > - That the on-board sound on your motherboard is disabled through the BIOS. CORRECT THIS WAS DONE BEFORE INSTALLING THE SOUND CARD > - That the on-board gameport is disabled through the BIOS. CORRECT THIS WAS DONE BEFORE INSTALLING THE SOUND CARD >- That your motherboard BIOS is up-to-date. MOTHERBOARD IS RUNNING THE LATEST BIOS, ITS ONLY 2 MONTHS OLD. > - That the operating system is up-to-date with the latest service packs and patches. WINDOWS UPDATES ARE UP TO DATE WITH THE LATEST PATCHES > - That there are no background applications open when you attempt the solution. CORRECT AS I STATED BEFORE > - That the anti-virus program is disabled. > NONE LOADED ON THE PC AS I STATED BEFORE > - That if you are over-clocking your system, return all options to their recommended settings. I HAVE NEVER OVERCLOCKED ANY OF MY PC?S > - That you access the PC with administrator rights. CORRECT I AM THE ONLY USER > 8. Perform an installation via the CTRUN program on the CD (X:\CTRUN\CTRUN.EXE where X is the >dri've letter of your CD dri've that has the installation CD). DONE! > 9. Reboot if prompted. DONE! > 20. Please obtain the latest updates for your Audigy 2 card from our website:- http://us.creative.com//support/downloads/
DONE! > 2. Once you are prompted to OPEN FROM CURRENT LOCATION or SAVE TO DISK, select SAVE >TO DISK and download the update to MY DESKTOP.
DONE! > 22. When the file has completed the phase of being transferred to your computer, locate the file on >your desktop and double click the file. DONE! > Do a speaker and diagnostic test. Do you have 5. output? DO I HAVE 5. OUTPUT? NO STILL THE SAME PROBLEM > I also need you to check the Speaker selection setting in Start | Programs| Creative | Sound Blaster >Audigy 2 | Creative Surround Mixer and ensure that it is set to 5. Speakers. Also set 5. at the Control CORRECT SEE LINKS FOR DESKTOP PICTURES http://vibig.rachost.com/desktop/DESK.jpghttp://vibig.rachost.com/desktop/DESK2.jpghttp://vibig.rachost.com/desktop/DESK3.jpg > Panel Speaker Settings.> On speaker systems that are equipped with a Fader or Rear channel volume controls, check to see >that these controls have not been set to use the front channels exclusi'vely. CHECKED! > Do reply back to me if you are still having problems with any error messages prompted. Thanks.
> PLEASE READ! AFTER FOLLOWING THE ABOVE INSTRUCTIONS! I REFERED BACK TO THE PRIOR E-MAIL AND DID THE TEST AS REQUESTED THE RESULTS WERE THE SAME WITH MINOR FIX. > . Open MediaSource (Start, All Programs, Creative, Creative MediaSource, Creative MediaSource >Organizer).> 2. There should be an EAX button underneath the Record button at the bottom of the screen, towards the left. Beside this button, there should be a small ellipsis button (. . .) that you can press. Click on this. > > Doing this locks up my pc as soon as I hit the (....) tab. The pc spikes to 00% and the only thing I >>can do is hit the reset button on the pc to hard boot it. I have tried this several times with the same >>results. THIS NO LONGER LOCKS UP MY PC, I AM ABLE TO HIT THE (?) AND IT BRINGS UP THE EAX CONSOLE SCREEN TO ENABLE CMSS 3D THIS HAS BEEN ENABLED ? DISABLED ? RE-ENABLED WITH THE SAME RESULTS. > CHOOSE THE RECORDING SOURCE> . Double click on the Windows Volume Control (generally on task bar) to load the mixer> 2. Go to Options > Properties > 3. Select adjust volume for: Recording, and hit OK> 4. Place a check mark under the proper recording source (Microphone) in the Recording Control box. > > Done, already checked this. And doubled checked it to make sure. > TEST RECORD THE AUDIO> . Go to Start > Programs > Accessories > Multimedia > Sound Recorder.> 2. Click the Record button (red dot)> 3. Talk into the microphone > 4. Let it record the source for a little bit> 5. Hit the Stop button (black square)> 6. Hit the Play button (single black arrow pointing right)> 7. You should now hear the audio that you recorded > > No sound recorded what so ever. I tested 3 different mircophones and > > none worked. I ran this test on the two other pc's I have at my > > residence and the mircophones worked and windows recorded just fine. Yes> > I have it plug into the proper slot. THIS IS STILL AND ISSUE AS IT STILL DOES NOT WORK. THE SPEAKERS ARE STILL NOT WORKING RIGHT AS I ONLY CAN GET SOUND OUT OF THE FRONT 2 SPEAKERS.NOTHING HAS CHANGED AS WE ARE BACK TO SQUARE ONE AGAINIf someone could help me or shed some light on this situation I would be very grateful. !!!
Thanks,
Capt.

Support have to go over some things first to make sure you've tried them. If it hasn't helped, just mail them back and let them know. It sounds like like you have the settings correct (CMSS, 5. in speaker selection), so there must be something wrong in the installation or configuration of the software.
The CleanBoot troubleshooting page on Microsoft's Kbase might help, although, it sounds like you covered a clean install aswell so that would normally help.
These forums are for user-to-user interaction, rather than Support from Creative. We monitor these forums and reply to some posts, but we can't reply to every topic and offer everyone support (that's what the phone and e-mail support are for).
Cat

Status of Backup Assistant for Contact Information

Can some one tell me (preferably a Verizon technical resource) the status of Backup Assistant for Contact Information?
I upgraded to a new phone a few weeks ago, and when searching MyVerizon saw the availability of the "free" contact backup capability...     It is not really free for me, because I don't have a data/text plan, so I had to pay for the app download and sync text transfer.    I figured it would be worth a few dollars to have the backup capability and ability to enter data from a keyboard instead of the numeric pad (I have a flip phone without a qwerty keyboard).     The sync import of my phone's contact list worked fine, and I spent quite a bit of time updating addresses online...   However, the changes online were not exported back to my phone, so my work added no value me.
I attempted to wait a few days to see if a regular update would resolve the problem...   Tried making a few updates today--the web application seemed buggier than a few weeks ago... If I tried to input more that a one field, it refused to save the contact.   I could update by doing small updates and saving, but this was painful...   Tried several times to update the ICE contacts--they would appear to be OK, but after a save the changes were lost...
Tried reading documentation to see if there was an explanation of how to download changes made online to phone...     Could find nothing other than instructions to download to a "new" phone...
Came to the forum to see if there was a message here that would help me...   I was very disappointed to see that the Backup Assistant has apparently been "broken" for several weeks with no apparent resolution timeframe available.
As an IT guy, I was appalled that Verizon does not have anything on the web site that warns users that there is a problem with the site and gives an approximate resolution time for the problem.    This is always a priority for my group--make the users aware of the problem and give them status on resolution progress. Verizon's lack of information has let me waste time and money trying to work with an application that is known to be broken.
Key questions for me:
1) Can the cost of downloading backup assistant and the syncing be refunded to me?   (The service to date has only provides me with a frustrating online update experience with no benefit to me on my phone.)
2) When will the site be functioning with normal capability?
3) What is normal function?   Are the problems that I have had with updates due to the problem discussed in other posts or are they standard features of buggy code?
4) If the application were working normally, how would one do updates online and have those updates exported back to the phone?

BillW wrote:
Can some one tell me (preferably a Verizon technical resource) the status of Backup Assistant for Contact Information? I doubt you will get anything but the "canned" response from the employees and techies....we are aware of a problem and have no estimated time of resolution.
I upgraded to a new phone a few weeks ago, and when searching MyVerizon saw the availability of the "free" contact backup capability...     It is not really free for me, because I don't have a data/text plan, so I had to pay for the app download and sync text transfer.   Yeah, I hear that. $1.99.... I figured it would be worth a few dollars to have the backup capability and ability to enter data from a keyboard instead of the numeric pad (I have a flip phone without a qwerty keyboard).     The sync import of my phone's contact list worked fine, and I spent quite a bit of time updating addresses online...   However, the changes online were not exported back to my phone, so my work added no value me. That's where the current issue is - syncing online changes back to the phone.
I attempted to wait a few days to see if a regular update would resolve the problem...   Tried making a few updates today--the web application seemed buggier than a few weeks ago... If I tried to input more that a one field, it refused to save the contact.   I could update by doing small updates and saving, but this was painful...   Tried several times to update the ICE contacts--they would appear to be OK, but after a save the changes were lost...
Tried reading documentation to see if there was an explanation of how to download changes made online to phone...     Could find nothing other than instructions to download to a "new" phone... The "sync" with the online system is supposed to happen automatically. I set the option on my phone (go to BA on the phone, Options >> Set Schedule. I have mine set to late night.) It is supposed to connect to your online backup and sync any changes. Mine shows last back up at 10 days ago, and I am not inclined to hit the "back up NOW" option as that is what seems to be causing loss of contacts form the phone.
Came to the forum to see if there was a message here that would help me...   I was very disappointed to see that the Backup Assistant has apparently been "broken" for several weeks with no apparent resolution timeframe available.
As an IT guy, I was appalled that Verizon does not have anything on the web site that warns users that there is a problem with the site and gives an approximate resolution time for the problem.    This is always a priority for my group--make the users aware of the problem and give them status on resolution progress. Verizon's lack of information has let me waste time and money trying to work with an application that is known to be broken.
Key questions for me:
1) Can the cost of downloading backup assistant and the syncing be refunded to me? Once the app is downloaded, there is no data charge for the syncing... and I doubt you will get the refund of the $1.99. (The service to date has only provides me with a frustrating online update experience with no benefit to me on my phone.)
2) When will the site be functioning with normal capability? No clue...
3) What is normal function?   Are the problems that I have had with updates due to the problem discussed in other posts or are they standard features of buggy code? It has worked as you expect it would, for me, in the past. I have used it for years, actually, and been pleased, and recommended it to others. The recent debacle is very disappointing.
4) If the application were working normally, how would one do updates online and have those updates exported back to the phone? Normally, it would be automatically synced to your phone when you log out of the online service, and then a daily backup from your phone to the website would occur on the schedule you set.
I am not a Verizon employee, I am simply a customer, satisfied for the most part with my service, and I like to help others. This recent BA mess is not fun....and I hope it gets resolved very soon.

Intellegent F4 help for contacts in Opp

Similar Messages

Maybe you are looking for