Inter company billing - how to post to GL accounts and not sub-ledger

Hi,
During Inter company billing, instead of creating Inter company customer and vendor invoice, there is requirement to post to Inter company GL accounts. How do we tweak the system to post to Inter company GL accounts instead of IC Customer/ Vendor?
Thanks,
Mukul

Use t-code OBYA and instead of vendor/customer accounts use GL Accounts. This should help you post directly to GL versus Customer/Vendors.
Dan

Similar Messages

Inter-company Billing Payment Idoc posting

Hi Friends,
We have got the regular inter-company billing scenario, After creating the inter-company billing document IV we post the payment Idoc through the output processing.
          Here IV document will be created by the user from the delivering company code which leads to creation of the payment document(an FI Doc) through the IDOC in the selling company code.
     But the user in Delivery company code will not have authorization to create an FI Doc in the selling company code right. I hope its the case at most of the customers.
              How can we over come the authorization issue for posting the Payment Idoc properly ?
I would like to have your opinion.
Thanks for your time.
Regards,
Aj

Thank you.
The Accounting Document number range set up within the MM module is:
51     2009     5105600000     5105999999
It is set to assign externally.
If you think it is something to do with the number range I don't understand how this can work ok with the MM processing?????
In the case of the FI processing, what then would be adopted as the FI doc No?
Are there any FI number range settings anywhere that may need to be looked at?
Best regards
Guy

How to configure Free of charge posting to cost account and not to balance?

Hi,
If we post GI for a free of charge delivery (sample) the following will be posted:
Cost of Sales 100
Finished goods 100
But we do not want to post to Cost of Sales but to a cost account.
What do I need to change?
Regards,
Eric.

Hi Eric van Zundert,
Follow below mentioned procedure;
1. OMJJ - Copy a new movement type as "901" from Movement type "601". For new movement type change the Valuation Modifier to "YAX" instead of "VAX" and SAVE.
2. OBYC - Here go to T/E key "GBB" and do the account determination for the new valuation modifier "YAX" of new movement type (Created in Step1).
3. VOV6 - Go to the Schedule Line Category (which is getting determined in Free of Charge Order) and assign the new Movement Type "901" instead of "601" and save.
Note: - If this Schedule Line Category is used for multiple Sales Orders then copy and create a new Schedule Line Category and do the changes for this one as suggeste din step3 and also do the schedule line category determination.
Now create a new order and do delivery and PGI and check A/c entry, also check during delivery it should pick up new Movement Type.
You need to take help of ur SD Consultant in this case.

Credit memo for Inter-company billing

Hi
We are trying to create a credit memo with reference to an inter company billing document. The business requirement is to create a credit memo to adjust the invoice value due to wrong value posted in the original inter-company invoice. Hence we do not want to use the sales returns route for this.
So, we are trying to create a credit memo request (ZCR) in VA01 with reference to the Inter company billing document (ZIV). We have maintained the copy control between ZCR and ZIV.
However, when creating a credit memo request (ZCR) with respect to the intercompany billing document, we get the below error in the sales order.
"Item category ZNLC is not defined" and "Check Item copy" with Message No: V1324.
ZNLC is the item category that we used in the intercompany delivery document.
We are able to ignore this message in sales order screen and save the credit memo request in VA01 and also create credit memo (ZG2) in VF01.
Pl provide your inputs on whether we are missing any other configuration.
Regards,
John

Hi
I have maintained the item level copy control settings as below.
In the copy control (VTAF) between ZCR (Credit memo request) and ZIV (Inter company billing) at the item level for ZNLC (Inter company item category coming source document), the following setup has been maintained
Copying requirements : 303
Copy schedule lines : Blank
Pos / neg qty : Blank
Pricing type : D
Update doc flow : X
Do not copy batch : blank
Pl let me know if there are any other settings to be done in config.
Thanks,
John

Inter Company Billing and automatic booking to Vendor master.

Hi,
Wish you a Happy New year,,,,,,,
We have done all the necessary configuration for generating Inter Company billing including the Cost booking to vendor Automatically.
There are certain points where I need some help,
1) During Idoc genration we are getting error related to Payment terms of Internal Customer.
If the payment terms is immidiate then only an Idoc is getting generated,,,,,,,,, else it is throwing an error message " status 51", but according to our business requirements it may be for any days and this may also impact our aging analysis and cash flows.
2) We have configured upto Third level of product hierarchy but while creating a contract if user maintains only upto first level, then release to account is not happening for inter company billing. Where as if user maintain upto third level there is no issue in the whole process of inter comapny billing.
Kindly suggest us how to restrict user to maintain product hierarchy pto third level during the creation of contract.
3) during the Inter company billing generation, if the internal customer is eligible for Tax exemption or tax booking, that is how to book the tax details to internal customer and also to vendor while booking the cost.Please let us know the logic for tax processign in Inter company billing and Idoc generation.
Awaiting for a favourable reply and thanks in Advance.
Regards,
Upendra.

Hello,
Did you assign the internal customer to the ordering sales organisation? If not, then create a customer in Delivering Sales org + DC+ Div + Plant and assign the same in the ordering sales organisation.
You can maintian the same in SPRO --> Enterprise structure --> Defenition --> Sales organisation (Enter internal customer).
Or
SPRO--> Sales and Distribution --> Billing ---> Intercompany billing --> Define internal customer
Prase

Inter - company Billing - Assign Organisational units by plant

Hi Experts
Im posting this since I found the same question closed, unanswered.
We are on IS - Retail and I have done all configuration for Inter-company Billing. However when I create the inter-company billing document I get the following error, "Sales organization & is not defined"
I checked SAP note 308989 in which it says the delivering plant (Site) needs to be attached to both the Ordering and Delivering companies Sales organisation, Distribution channel combination. Also this needs to be done as part of master data in WB02, which I have done.
It also says that the 2 entries maintained should be present in the table in transaction OVV9 - Assign Organisational units by plant. However, in my case the attachment of the site to the ordering companies sales org. is missing in the inter-company set up. Also it does not give the option of creating a new entry.
Appreciate if someone could help me resolve this so I could create the inter company invoice.
Thank you,
Afzal

Hi Afzal,
in all the customizing setting of note 308989 are good, then those fields should be filled.
Please check it very carefully.
Please check in customizing of sales order type (transaction VOV8) if the intercompany billing type maintained.
In case of stock tranfer order intercompany (where there is not sales order), run transaction 0VLK, display the delivery type used, and check the order type present in field 'Default Ord.Ty.' (usually it is 'DL').
Then check in VOV8 for this sales order type.
If everything is fine, then it is necessary to debug the delivery creation.
The field LIKP-VKOIV etc. should be filled in program FV50XFLK_LIKP_FUELLEN_IV in intercompany sales; program FV50XFLK_LIKP_FUELLEN_IV_UML in stock transfer order intercompany.
Best regards,
Ivano.

Inter company Billing for service industry

Hi,
I never workded over inter company billing.Please suggest me what to do? I am in a service industry project where no delivery takes place.So how should i go about for intercompany billing configuration?
Thanx in advance.
Regardds,
Satya

Dear Satya,
You can create the inter company bill with refrence to the service order
To do inter company billing settings go through this IMG path
IMG>Sales and Distribution>Billing-->Intercompany billing
Process steps for normal inter company process with delivery.
INTER COMPANY BILLING
Definition:
A company arranges direct delivery of the goods to the customer from the stocks of another company belonging to the same corporate group.
To put in simple terms, Company code A orders goods through its sales organization A from Plant B belonging to Company code B.
It is imperative that both Plants A & B should have the material. In other words, the material is created for both the Plants A & B + their respective storage locations.
Sales Organizations and Plants are uniquely assigned to Company codes. It is not possible to assign either a plant or a sales organization to more than one company code.
Sales organizations and plants assigned to each other need not belong to the same company code.
In other terms, a plant belonging to Company code A & assigned to Sales Organization A can also be assigned to Sales Organization B of Company Code B. This enables cross company sales.
PARTIES INVOLVED
1) End Customer 2) Ordering Company code 3) Supplying Company Code.
End customer:
Customer who orders goods from the ordering company code.
Ordering Company Code:
Which orders goods from Plant belonging to Supplying Company code through its sales organization and bills the end customer.
Supplying Company Code:
Supplies goods from its plant to the end customer specified by the ordering company code and bill the ordering company code.
CONFIGURATION SETTINGS
Assign Delivery Plant of the supplying company code to Sales Org + Distribution channel of the Ordering company code in the Enterprise Structure.
DEFINE ORDER TYPES FOR INTERCOMPNY BILLING:
Menu path: IMG/ SD/Billing/Intercompany Billing/Define Order Types for Intercompany billing
Assign Organizational units by Plant:
Menu Path: IMG/ SD/Billing/Intercompany Billing/Assign Organizational units by Plant.
Define Internal Customer Number By Sales Organization:
Menu Path: IMG/ SD / Billing/ Intercompany Billing/ Define Internal Customer Number By Sales Organization:
Creating / Showing Ordering Sales Organization as Internal Customer for Supplying Company code:
Transaction Code: XD01
The ordering sales organization is represented as Internal customer of Supplying company code.
We need to create customer master in Account Group - Sold to Party and maintain minimum required financial & Sales Area data.
This internal customer number has to be assigned to the ordering sales organization. Hence, the system automatically picks up this Internal customer number whenever there is Intercompany billing.
PRICING:
We need to maintain two pricing procedures RVAA01 & ICAA01. Pricing procedure RVAA01 represents condition type PR00 & any other discounts or surcharges that are meant for end customer.
We assign Pricing procedure RVAA01 to combination of Sales area (Of Ordering company code) + Customer Pricing Procedure + Document Pricing Procedure of Sales document type.
This pricing Procedure (RVAA01) is determined both at Sales Order level & Billing processing for the end customer. We maintain PR00 condition type to represent the ordering company code's price to the end customer.
Condition records for PR00 are maintained using organizational elements of Ordering company code, end customer & the Material.
Eg: Sales Org. of Ordering company code + End customer + Material.
We also need to maintain PI01 condition type to represent costs to Ordering company code (in other words revenue to supplying company code). It is statistical condition type & meant for information purpose only.
Condition records for PI01 are created with the following key combination:
Ordering sales Org + Supplying Plant + Material
Pricing Procedure ICAA01is determined at Intercompany billing processing level.
Pricing Procedure ICAA01 - Pricing Procedure for Inter company billing is assigned to the combination of: Sales Area (of supplying company code) + Document pricing Procedure of Billing document type IV + Customer Pricing Procedure of the Internal customer.
Pricing Procedure ICAA01 has condition type IV01 that represents revenues for Supplying company code in the intercompany billing.
PR00 condition type also appears in Intercompany billing document. It is for information purposes only and does not have bearing on the value of the document.
PI01 represented under pricing procedure RVAA01 is reference condition type for IV01 and the same is defined in the condition type IV01. Due to this these two condition types represent same value.
The condition type IV01 in intercompany billing document represents revenue to the Supplying Company. But its corresponding condition type PI01 in the billing document to the end customer is shown as a statistical item meant for information purposes.
In your requirenment there will not be delivery process in between service sales order and the intercompany bill so do the settings accordingly in the copy controls between service sales order type and inter company billing type.
I hope this will help you,
Regards,
Murali.
I hope this will help you,

Re : Organizational data for inter-company billing

Hi
While doing intercompany settings (img - enterprice structure - SD - assign sales org - disribution plant) i am getting the following error
" Organizational data for inter-company billing
missing in plant SUDA "
How to solve.
Thanks
Anto

Hi Anto,
IMG check wheather you assing Supplying company sales area to Supplying plant.
IMG->Saes&Dsitr -> Billing -> InterCompany Billing-> Assign Organizational unit by Plant
Select Plant (supplying company) and assign Sales org, Distbn Channel and Division of supplying company.
Regards,
M.Manickam

Inter company billing use and steps?

Inter company billing use and steps?

INTERCOMPANY BILLING
Definition:
A company arranges direct delivery of the goods to the customer from the stocks of another company belonging to the same corporate group.
To put in simple terms, Company code A orders goods through its sales organization A from Plant B belonging to Company code B.
It is imperative that both Plants A & B should have the material. In other words, the material is created for both the Plants A & B + their respective storage locations.
Sales Organizations and Plants are uniquely assigned to Company codes. It is not possible to assign either a plant or a sales organization to more than one company code.
Sales organizations and plants assigned to each other need not belong to the same company code.
In other terms, a plant belonging to Company code A & assigned to Sales Organization A can also be assigned to Sales Organization B of Company Code B. This enables cross company sales.
PARTIES INVOLVED
1) End Customer 2) Ordering Company code 3) Supplying Company Code.
End customer:
Customer who orders goods from the ordering company code.
Ordering Company Code:
Which orders goods from Plant belonging to Supplying Company code through its sales organization and bills the end customer.
Supplying Company Code:
Supplies goods from its plant to the end customer specified by the ordering company code and bill the ordering company code.
CONFIGURATION SETTINGS
Assign Delivery Plant of the supplying company code to Sales Org + Distribution channel of the Ordering company code in the Enterprise Structure.
DEFINE ORDER TYPES FOR INTERCOMPNY BILLING:
Menu path: IMG/ SD/Billing/Intercompany Billing/Define Order Types for Intercompany billing
Assign Organizational units by Plant:
Menu Path: IMG/ SD/Billing/Intercompany Billing/Assign Organizational units by Plant.
Define Internal Customer Number By Sales Organization:
Menu Path: IMG/ SD / Billing/ Intercompany Billing/ Define Internal Customer Number By Sales Organization:
Creating / Showing Ordering Sales Organization as Internal Customer for Supplying Company code:
Transaction Code: XD01
The ordering sales organization is represented as Internal customer of Supplying company code.
We need to create customer master in Account Group Sold to Party and maintain minimum required financial & Sales Area data.
This internal customer number has to be assigned to the ordering sales organization. Hence, the system automatically picks up this Internal customer number whenever there is Intercompany billing.
PRICING:
We need to maintain two pricing procedures RVAA01 & ICAA01. Pricing procedure RVAA01 represents condition type PR00 & any other discounts or surcharges that are meant for end customer.
We assign Pricing procedure RVAA01 to combination of Sales area (Of Ordering company code) + Customer Pricing Procedure + Document Pricing Procedure of Sales document type.
This pricing Procedure (RVAA01) is determined both at Sales Order level & Billing processing for the end customer.
We maintain PR00 condition type to represent the ordering company codes price to the end customer.
Condition records for PR00 are maintained using organizational elements of Ordering company code, end customer & the Material.
Eg: Sales Org. of Ordering company code + End customer + Material.
We also need to maintain PI01 condition type to represent costs to Ordering company code (in other words revenue to supplying company code). It is statistical condition type & meant for information purpose only.
Condition records for PI01 are created with the following key combination:
Ordering sales Org + Supplying Plant + Material
Pricing Procedure ICAA01is determined at Intercompany billing processing level.
Pricing Procedure ICAA01 Pricing Procedure for Inter company billing is assigned to the combination of:
1) Sales Area (of supplying company code) + Document pricing Procedure of Billing document type IV + Customer Pricing Procedure of the Internal customer.
Pricing Procedure ICAA01 has condition type IV01 that represents revenues for Supplying company code in the intercompany billing.
PR00 condition type also appears in Intercompany billing document. It is for information purposes only and does not have bearing on the value of the document.
PI01 represented under pricing procedure RVAA01 is reference condition type for IV01 and the same is defined in the condition type IV01. Due to this these two condition types represent same value.
The condition type IV01 in intercompany billing document represents revenue to the Supplying Company. But its corresponding condition type PI01 in the billing document to the end customer is shown as a statistical item meant for information purposes.
Condition Type VPRS in the intercompany-billing document indicates cost to the supplying company code.
The use of two different condition types in Intercompany billing is necessary to ensure that data is transmitted correctly to the financial statement (Component CO-PA).
ILLUSTRATION:
STEP 1: Create Sales Order
Manually Enter the Delivery Plant of the Supplying Company Code:
OBSERVE CONDITIONS SCREEN FOR ITEM:
PR00 represents Price to the end customer (in other words, revenue for the ordering company).
PI01 represents cost to ordering company (in other words, revenue for the supplying company). It is represented as statistical item only.
DELIVERY:
Delivery is carried out from the supplying point & hence we can observe that it is done from shipping point assigned to the supplying point.
Subsequently, Picking & PGI are carried out.
BILLING TO END CUSTOMER:
T-Code: VF01
Create Intercompany Billing:
T-code: VF01
OBSERVE THE CONDITIONS SCREEN OF THE INTERNAL INVOICE:
IV01 Condition type represents revenue for the supplying company code.
VPRS condition type represents cost to the supplying company code.
PR00 in intercompany billing document displays amount billed to the end customer. It serves as just an information item and is inactive.
If the ordering company enters the incoming invoice manually, the delivering company can print out an invoice document with the help of output type RD00, which is then sent to the Payer.
If automatic invoice receipt has been agreed, we must use the SD output control functions to ensure that output type RD04 is found in internal billing. In R/3 system, output determination procedure V40000, which includes this output type, is assigned to Intercompany billing type IV.
The automatic posting to the vendor account is initiated when output type RD04 is processed. The system uses the EDI output type INVOIC in the FI variant.
To ensure that payables are posted in financial accounts of the ordering company, the delivery company must be created as a vendor.
Configure Intercompany Stock Transport Order
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with

Inter company Billing - for service

Dear SD Experts,
My client has 2 company; that are,
 Company 1000 with sales org 1000 and
 Company 2000 with sales org 2000
A customer placed order by company 1000. How can I create an order by company 1000 and an invoice it directly to Customer; however, I would like SAP create inter-company billing automatically between company 1000 and company 2000?
P.S. Our client's business are service, he dose not has any sell stock.
Great Thank for any idea and configuration document,
[email protected]
Prach

Dear Prasanth,
 Sorry for make you confused. Clearly customer placed an order in company code 1000. However, company 2000 will take this service. Thus, customer will recieved invoice from company 1000. And company 1000 will recieved invoice from company 2000.
 Actually, "I don't have any problem in crated order by company code 1000"; but how can I get other invoice automatically (invoice from company code 2000 send to company code 1000) after I create invoice from company code 1000 to customer.
Best Regards,
Please share an idea or any configuration document about inter-compnay
Prach

Inter company billing documents

Hi Sap Experts ,
Does any body let me know , how to see the inter company billing documents Through Sales order , Purchase Order , Material , STO,
Thanks & Regards

Hi Shwetha,
You can not get the required information in one table , you need to look into two tables . the better way is make a query using SQVI and Join the tables VBRK and VBRP.
In VBRP, AUBEL is Sales order # so get the IV billing document types from VBRK where AUBEL of VBRP is equal to the sales orders.
You can apply the same logic for Stock transport orders too.
For PO i didn't remember the exact field in VBRP, please refer the table VBRP and apply the logic that I told you.
Please let me know if you have any doubts.
If you don't know Joining tables in SQVI, may be my solution might be confusing to you.
Regards,
Aj..
Don't forget to reward points if helpful.

Inter Company billing issues with product heirarchy

Hi,
Wish you a Happy New year,,,,,,,
We have done all the necessary configuration for generating Inter Company billing including the Cost booking to vendor Automatically.
There are certain points where I need some help,
1) During Idoc genration we are getting error related to Payment terms of Internal Customer.
If the payment terms is immidiate then only an Idoc is getting generated,,,,,,,,, else it is throwing an error message " status 51", but according to our business requirements it may be for any days and this may also impact our aging analysis and cash flows.
2) We have configured upto Third level of product hierarchy but while creating a contract if user maintains only upto first level, then release to account is not happening for inter company billing. Where as if user maintain upto third level there is no issue in the whole process of inter comapny billing.
Kindly suggest us how to restrict user to maintain product hierarchy pto third level during the creation of contract.
3) during the Inter company billing generation, if the internal customer is eligible for Tax exemption or tax booking, that is how to book the tax details to internal customer and also to vendor while booking the cost.Please let us know the logic for tax processign in Inter company billing and Idoc generation.
Awaiting for a favourable reply and thanks in Advance.
Regards,
Upendra.

Double click the status 51 to find the error message. 51 just tells that the Idoc has an error, but which error can only be seen if you go a step more into detail.
For what reason do you have level 1 product hierarchies in the system, if you need the full hierarchy to level 3?
I give you example:
Level 1 =11111
level 2 = 21111, and 22222 and 23333
level 3 = 31111 and 32222 and 33333
Hierarchy should only be maintained available in customizing only in its full length:
111112222233333
or 111112111131111
but not the level one alone.

Inter Company Billing (for order-related)

Dear SD Expert,
I have problem with "Inter Company Billing". What I have searched are showed in term of "Inter Company Billing (for Delivery-related). But, my case is about "Inter Company Billing (for Order-related). Thus, I got problem in created inter-company billing.
Ex In "Copy Control from Sales Order to Billing", the configuration guide suggest me to use "014 (Hdr dlv.rel.IC bill.)"; but, I didn't want it to copy from delivery order. How can I solve it?
Could you help me on that?
Best Regard,
Prach

Hi,
I saw in SAP Forum that you faced a similar problem sometime back as I am facing now. Just curious to check whether you had a solution for the same, if so, please share with me. Please see below for my problem.
We are using SAP R/3 4.6C version. Normally, the inter-company billing are delivery related and this is working fine. I am configuring the order related Inter-company billing, i.e. Third Party drop shipment with Inter-company. I refered to SAP notes 203876, 63459, 381042 and maintained the copy control between OR => IVA (for TAS) as follows:
Copying requirement = '013',
Invoiced quantity = 'F', (*)
Quantity/value = '+',
Pricing type = 'G'.
The issue I am facing is when I try to create an Inter-company invoice (after the F2 Customer invoice), the End customer details is being pulled instead of the Inter-company customer details. In other words the Inter-company invoice is also being issued to the End customer. Also the prices are showing in negative.
Kindly share with me if any of you guys know a solution for this. I have searched all the SAP forums, but couldn't find a similar issue.
My concern here is, in none of the SAP notes, there is no information about the copying requirement at the header level between OR=>IVA. I am not sure whether this is causing the issue.
My mail id is "[email protected]".
I would appreciate your reply to this message.
Regards,
Saravanan

Cross company LIV without a Inter-company billing

Hi,
Is it possible to post a FI-customer invoice (FB70) in Company A by posting a LIV in Company Code B. Currently Company A does not have a Sales/Purchasing organization setup. Requirement for a PO in Company B is, to track the products and monitor the sales.
The standard (EDI) inter-company billing needs a order/billing to be created in Company A.

Hi,
Check these notes:
SAP Note 109254 - Customizing stock transport order Cross Company
SAP Note 338922 - Analysis note for cross-company transactions (delivery)
SAP Note 543821 - FAQ: cross-company processing
Regards
Eduardo

Want to know about inter company billing or stock transfer

Dear All,
I want detail about intercomany billing. Currently we are not suing this std. flow. I want to study and implent. Pl. help me in this process.
Points will be added.
Nik

Hi ,
Below is the interco. process.
Business case: - Customer orders goods to company code/Sales organization A (Eg.1000/1000). Sales org 1000 will accept and punch the order in the system with sold to party as end customer code in the system. Company code/sales org B (Eg.2000/2000) will deliver the goods to end customer and raise an inter-company billing on C.Code/Sales Org 1000 with reference to delivery. This can happen only after 1000 raises invoice to his end customer to whom the material has been delivered by 2000.
SPRO Customization required:-
1. Assign plant of delivering company code to sales org/distribution channel combination of ordering company code (Enterprise structure -->Assignment --> S&D --> Assign Sales org, Dist channel to Plant)
2. Assign intercompany billing type as IV for sales document type OR (S&D -->Billing --> Interco Billing -->Define order types for inter.co billing)
3. Assign Organizational Units By Plant (S&D -->Billing --> Interco Billing -->Assign Org Units by Plant)
4.Define Internal Customer Number By Sales Organization (S&D -->Billing --> Interco Billing -->Assign Org Units by Plant)
5. Automatic posting to vendor account (Optional)
6. Maintain pricing procedure determination -For customer sales and billing
Maintain pricing procedure determination - For inter-company billing (interco price procedure ICAA01)
Master data to be maintained:-
1. Create end customer master in company code/sales org
2. Create customer master for 1000 company code/sales org in sales area for 2000
3. Maintain PR00 as price for end customer-Active in standard pricing procedure RVAA01
4. Maintain PI01 as price which has to be paid to 2000-Statistical in RVAA01
5. Maintain IV01 as inter-company Price-Active in ICAA01
Process:-
1. Create OR with sold to party as end customer.
2. Plant to be selected is delivering plant belonging to different company code. With this selection system will treat this order as inter-company sales.
3. Pricing procedure is RVAA01
4. With reference to this order delivery will be created from the delivering plant and post the goods issue for this delivery.
5. Ordering sales org will create billing document F2 with reference to delivery for end customer.
6. Delivering sales org will create inter-company billing IV with reference to delivery document.
Hope this helps.

Inter company billing - how to post to GL accounts and not sub-ledger

Similar Messages

Maybe you are looking for