Interactivate buttons on iframe

Hello!
I am currently working on a webpage, in which I put a
"floating" .html page on top of a .swf page with an iframe.
my question is-
how to code the buttons on the .swf to inteact with the
iframe(by clicking on the various buttons, only the content of the
iframe should change to a different .html page)?
I tried the code below, but it didn't work(It only opened the
page in an new window.
'float' being the name of the iframe.
on (release) {
navigateToURL(request, '_float');
thanks in advance!

Thanks-
i tried it..but it still opens a new page.
I want it to open a page in the frame itself..
Any other suggestions, please?

Similar Messages

Flash button targeting iframe

I have a flash nav the has button and on the same html page I
have an iframe. The iframe is in a table. I cannot taget the iframe
to change the html within. It just open the html I am calling in a
new window each time. I am useing the get url , and in the window
space I am putting the name of the iframe. I have been told this
will work but it doesn't I believe because it is in a table. Heres
the layout....PLEASE HELP
http://www.bravocorp.com/hyper06/

hi Rob,
thanks for the advice, i managed to solve the porblem (i put the script in the wrong frame of the timeline where the buttons movie symbol is)
but another problem came in hand, when i try it on safari, its all good, smooth and no borders, but when i try it on firefox, theres a white border appearing on it, i think its compatibility problem?
ill try the 1st that you mentioned maybe it'll work since i used the ".swf" file than the html in the iframe
tnx Rob.

IFrame not working in IE

Hello,
I have a page that utilizes an IFrame - http://www.freddoubleday.com/testSite/listen.html. In FF and Safari, when you click on one of the "Play" buttons, the IFrame changes to display the lyrics for that song. However, in IE this does not happen. Does anyone know how I can fix this with a hack, etc...? If not, can you think of a better way to accomplish my goal without an IFrame? Thank you for reading, and any help you may be able to offer! I would love the help!
Cheers,
A.B.

This page is not found on server
http://www.freddoubleday.com/testSite/lyrics/meredith.html
Code errors can cause problems with browser rendering:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.freddoubleday.com%2FtestSite% 2Flisten.html
http://jigsaw.w3.org/css-validator/validator?profile=css21&warning=0&uri=http%3A%2F%2Fwww. freddoubleday.com%2FtestSite%2Flisten.html
Also may wish to add allowtransparency="true" attribute to your iFrame code for IE.
Iframe Attributes:
http://www.w3schools.com/TAGS/tag_iframe.asp
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Iframes show and hide

Hi All,
I have the Requirement like :
I have two iframes side by side in a page, and two buttons show and hide,
once i click hide button second iframe should disappear and first one should be increase in size to fit whole window. and once i click show first and second should be 50/50 in the page
for this i followed below steps
1) created page.
2) created two report region (No Template)
3) In one region source i called iframe like
TABLE>
<TR>
<td>
<IFRAME SRC="http://Localhost:7777/pls/apex/f?p=&APP_ID.:&P104_INTERFACE.:&SESSION." WIDTH=&P104_WIDTH. HEIGHT=540 scrolling="auto" frameborder="1"></IFRAME>
</td>
</tr>
</table>
4) in second region
TABLE>
<TR>
<td>
<IFRAME SRC="www.google.com ; HEIGHT=540 scrolling="auto" frameborder="1"></IFRAME>
</td>
</tr>
</table>
6)conditionally showing the region with the help of SHOW and HIDE BUTTON
7)and also on Show and hide button i am setting the value of P104_WIDTH . So the size will vary with conditional display?
NOW MY QUESTION IS:
once i click hide button THE CONTENTS(item VALUES) OF THE FIRST FRAME ARE REFRESHED, DUE THAT ALL ENTERED DATA WIL DISAPPEAR SO HOW TO AVOID IT , without refreshing the frist frame i need to set the P104_width value so it interm width will set in the iframe region??????
Thanks & Regards
Nagaraj B K

I had another idea that I am pursuing. I am looking into extending the current renderer CommandNavigationRenderer and will render another goLink just after the current goLink that will execute a close action. I was able to re-direct the rendering by added an override render-kit block in my current faces-config.xml file.
<render-kit>
<renderer>
<component-family>org.apache.myfaces.trinidad.Command</component-family>
<renderer-type>oracle.adf.rich.NavigationItem</renderer-type>
<renderer-class>com.riscs.ui.backing.jsp.components.ClosableCommandNavigationItemRenderer</renderer-class>
</renderer>
</render-kit>
If this works I am planning on extending the commandNavigationItem by creating a ClosableCommandNavigation tag and add a "closeAction" tag that will determine if a close item should render.
Preliminary work looks promising. I will update if I make progress...please let me know if I am crazy.
Thanks.

HELP ABOUT IFRAME EVENT!

I'm wanna check button in iframe is clicked, so if it clicked it will redirect to specific url.
here is button from iframe
<input type="submit" value="Vote for Crystal Dekaron - 11 Classes" name="2fae16e9a671c5f05a419782d585cce4" style="padding: 10px;">
here is script:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style>
#outerdiv
width:480px;
height:265px;
overflow:hidden;
position:relative;
align:center;
#inneriframe
position:absolute;
top:-100px;
left:-250px;
width:1310px;
height:1200px;
</style>
<div id="fb-root"></div>
<script>(function(d, s, id) {
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = "//connect.facebook.net/hr_HR/all.js#xfbml=1";
fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script>
</script>
<script language="javascript">
document.onmousedown=disableclick;
status="Right Click Disabled";
Function disableclick(e)
if(event.button==2)
     alert(status);
     return false;
</script>
<title>vote</title>
</head>
<body bgcolor="#FFFFFF" onload="disableContextMenu();" oncontextmenu="return false">
<center>
<div id='outerdiv'>
<br></br>
<center><iframe id="inneriframe" name="inneriframe" src="http://www.xtremetop100.com/in.php?site=1132341231" scrolling="no" frameborder="0" height="350" width="230" onload="disableContextMenu();" onMyLoad="disableContextMenu();" ></iframe>
</div>
<center>
<br></br>
<center>AFTER U DONE, U WILL BE GET COINS!
</center>
<center>
<script type="text/javascript">
    setTimeout(function(){
alert("U didn't enter rapacha, please try again");
   window.location.reload(1);
}, 1000);
         </script>
    <script type="text/javascript">
    var count=60;
var counter=setInterval(timer, 200);
function timer()
count=count-1;
if (count <= 0)
     clearInterval(counter);
     return;
   $(window.frames['inneriframe']).mousedown(function(event){
   var eventId = $(event.target).attr('type');
   if (eventId == 'sumbit') {
   alert("thanks for vote")
document.getElementById("timer").innerHTML=count + " secs";
if (count <= 1)
        document.getElementById('timer_div').innerHTML = 'YOU DIDNT ENTER RAPACHA, TRY AGAIN';
        clearInterval(interval);
    </script>
    Totally <span id="timer"></span>, please hurry up!
    </center>
</head>
<body>
</IFRAME></body>
</html>

I think that if replace options in NSTrackingArea for NSButton it will be help me
In Debugger I saw that default options is 4225 - I think that it's NSTrackingMouseEnteredAndExited|NSTrackingActiveAlways|NSTrackingAssumeInside
I want replace it to NSTrackingMouseEnteredAndExited|NSTrackingActiveAlways|NSTrackingInVisibleRect
But if I do it in awakeFromNib function and add breakpoint in drawRect: -- it have first value. Somewhere value overwrite before drawRect:
Code:
//MyButton.mm
- (void)awakeFromNib
NSArray *a = [self trackingAreas];
NSTrackingArea * t = [[NSTrackingArea alloc] initWithRect:(NSRect){0, 0, 100, 50}
options:NSTrackingMouseEnteredAndExited|NSTrackingActiveAlways|NSTrackingInVisi bleRect
owner:self
userInfo:nil];
[self removeTrackingArea:[a objectAtIndex:0]];
[self addTrackingArea:t];
[t release];
- (void)drawRect:(NSRect)aRect
NSArray *a = [self trackingAreas];
NSTrackingArea *t1 = [a objectAtIndex:0]; //always first value !!!
[super drawRect: aRect];
Any idea how to do that ?
Message was edited by: pavelmagur

How to Navigate from af:internalFrame to another page in the parent frame?

Hi!
I'm using an ADF IFrame Component <af:internalFrame>..
we have a requirement where we needed to navigate from a page in the Internal frame to another page in the browser, i.e., on clicking a ceratain button in IFrame , the browser window should load an another page in the main window/frame(not in IFrame). I know this can be done with javascript by setting the
window.location='newurl'
But that would take me away from the normal JSF lifecycle, that is I have to perform certain processing of the inputs from the Iframe, and then navigate in the normal JSF way to another page in the main browser window,according to the navigation configured in the faces-config.xml; or if possible, programmatically ,in the backing bean.
Can someone give me any hint of how to do this?
Thanking you in advance,
Samba

Correct. To achieve this functionality JavaScript is required.
--Ric

OT: Safari for XP/Vista

Apple has just released Safari 3 public beta web browser for
Windows
XP/Vista.
I just installed it and it is fast. But I wonder if the page
rendering on
PC is really the same as on a Mac. Anybody with dual OSs care
to compare
the two?
http://www.apple.com/safari/download/
--Nancy O.

Thanks for that confirmation. Additionally, I've found it
ignores
<acronyms>. It ignores the print page form buttons on
iframed pages.
Browser window isn't resizable except for min & max -
nothing in between. It
doesn't open local files easily and is thus useless for
previewing pages
from DW. And it's been hacked so security isn't what they
claim.
Honestly, I had no interest in using this as my default
browser. Was just
wanting to know if it would be reliable for cross browser
testing of web
sites. Evidently not.
-Nancy O.
"Brendon Pascoe" <[email protected]> wrote in message
news:[email protected]...
> : Nadia : ** Adobe Community Expert ** wrote:
> > "Nancy O" <[email protected]>
wrote in message
> > news:[email protected]...
> >> Apple has just released Safari 3 public beta
web browser for Windows
> >> XP/Vista.
> >>
> >> I just installed it and it is fast. But I
wonder if the page rendering
on
> >> PC is really the same as on a Mac. Anybody with
dual OSs care to
compare
> >> the two?
> >>
> >>
http://www.apple.com/safari/download/
> >
> >
> > Downloaded and tested yesterday. Found that the
pages I tested looked
the
> > same in the Win version of Safari as they did on
the Mac version (I had
> > tested them previously :) - oh apart from the font
rendering - we all
know
> > that's a bit of a problem.
> >
> > However, I worked on a site last night using
show/hide behaviours and I
know
> > that this *should* have worked cross browser, but
for some reason the
Win
> > Safari, was very inconsistent - one minute the
show/hide would work and
then
> > the next it wouldn't........ totally weird.
> >
> >
>
> From my limited testing experience of it, it most
certainly doesn't
> operate the same between the two platforms. I (along
with Michael E.)
> use a bit of scripting which works just fine in IE, FF,
Safari on Mac,
> most any browser, as a dhtml fade slideshow, today it
was tested in
> Safari 3 beta Windows, and it doesn't work. Here:
>
http://www.redmountainhome.com/
>
> Either the browse needs to be fixed, or the developer of
that [articular
> (and many others I would suggest) script needs to do
some tweaking.
> Hopefully, for us, its the latter - chances are the fix
will be out
> sooner. Mind you, I don't know any of my clients that
will even know
> about Safari, even by the end of the year, so its not an
overwhelming
> concern at this stage.
>
> Brendon

In the Firefox browser, when i click button in ADF page, then popup the OAF page in iframe tag,and then when i click the PPR bean in OAF page, then Firefox browser reload to ADF page. This is not the right response,browser should not reload the ADF pa

In the Firefox browser, when i click button in ADF page, then popup the OAF page in iframe tag,and then when i click the PPR bean in OAF page, then Firefox browser reload to ADF page. This is not the right response,browser should not reload the ADF page.It should stays in OAF page or goto another OAF page. and in other browser such ad IE,We get the right response.

hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
[[Fix problems connecting to websites after updating Firefox]]

How do you fire a button click event on apex page from fancybox iframe that was created by page

I am trying to fire off the button click event from fancybox iframe. The apex page has a button that launches a fancybox iframe which is loaded with an APEX form. On close of that fancy box, I am trying to fire a click event on the parent page which will refresh a div with html that is created with plsql. The button on the page works as expected when clicked from the page. It will show a debug alert message to prove it was called and then load the div with the correct data. I am unable to fire off this button click from the fancybox iframe when it closes.
A couple of points:
I using Plug-in: Execute PL/SQL Code and Return Content ("PLUGIN_MULEDEV.SERVER_REGION_REFRESH") to place the create fancybox statement. It is used to populate a div using plsql.
The name of the button on the main page is P2020_REFRESH_SECTION_BUILDER_BTN.
The click dynamic action on the button is calling the plugin to replace the html in the div.
The data in the form in the fancybox is being saved to the database. On close of the fancybox box I want to refresh the div so the new record is included in the div html.
Can anyone help. Here is the fancybox code:
function customProcessOnReadyState4(){
    for (var i=0;i<11;i++){
      $( "#tabs"+i ).tabs();
      $("#createNewExerciseLink"+i).fancybox({
          ''width''         : ''60%'',
          ''height''        : ''70%'',
          ''autoScale''     : true,
          ''transitionIn'' : 200,
          ''transitionOut'' : 200,
          ''type''          : ''iframe'',
          ''onClosed''         : function() {
                                     window.parent.$(''#P2020_REFRESH_SECTION_BUILDER_BTN'').click();
Here are the dynamic actions assigned to the button:
5 - Execute JavaScript Code
alert("Starting refresh");
10 - Execute PL/SQL Code and Return Content [Plug-in]
begin
SCTUI.create_sct_tabs2(:P2020_CREATE_SECTION_LOV, '1');
end;

user setActionListener...
<af:setActionListener from="#{bindings.XXX.inputValue" to="#{backingbean.variable}"
              <af:inputText value="#{bindings.Email.inputValue}"
                            label="#{bindings.Email.hints.label}"
                            binding="#{backingBeanScope.backing_ShuttlePage.it2}"
                            id="it2">
                <f:validator binding="#{bindings.Email.validator}"/>
              </af:inputText>
              <af:commandButton text="commandButton 2"
                                binding="#{backingBeanScope.backing_ShuttlePage.cb2}"
                                id="cb2" action="passing">
                <af:setActionListener from="#{bindings.Email.inputValue}"
                                      to="#{processScope.detail}"/>
              </af:commandButton>next jsf page:
            <af:outputText value="#{processScope.detail}"
                           binding="#{backingBeanScope.backing_ProcessScope.ot1}"
                           id="ot1"/>setPropertyListener also should work
<af:setPropertyListener from="#{bindings.Email.inputValue}" to="#{processScope.detail}" type="action"/>

IFrame in jQuery Dialog - submit iFrame using dialog button

Hi Everyone,
I know a lot of us are using JQuery modal dialog feature and some of us using iframe strategy to display form or page inside of modal dialog popup. Personally, I am using these features a lot in my app but there is a step where I am a bit stuck.
Here is my situation ( I am sure most of us will be interested in this to be resolved if not yet):
I have a regular page (will call it parent page), on this page I have a button and by clicking on this button I am getting a jquery modal window popup. The button itself is pointed to url: javascript:LinkAssets(); and the script to call modal popup with iFrame in HTML Header of parent page is:
<script type="text/javascript">
// Link Assets - Modal PopUp
    function LinkAssets(){
var apexSession = $v('pInstance');
var apexAppId = $v('pFlowId');
var assetNumber = $v('P17_ORDER_ID');
$(function(){vRuleBox = '<div id="LinkAssetsBox" title="Link Assets to the Order">
   <iframe src="f?p='+apexAppId+':55:'+apexSession+'::NO:55:P55_ORDER_NUMBER:'+assetNumber+'"
     width="680" height="320" title="Link Assets to the Order" frameborder="no">
   </iframe>
   </div>'
$(document.body).append(vRuleBox);
$("#LinkAssetsBox").dialog({buttons:{"Close":function(){$(this).dialog("close");}},
                                                               stack:true,
                                                               modal:true,
                                                               width:700,
                                                               height:340,
                                                               resizable:true,
                                                               autoResize:true,
                                                               draggable:true,
                    close: function(){$("#LinkAssetsBox").remove();
                                                         location.reload(true);}
</script> As you see I am calling page 55 from jquery script into iFarme which will be displayed in modal dialog. All described above is working fine, no problems and most of us use it.
My problem is here: my JQuery modal dialog has a "CLOSE" button which allows me to close a modal dialog without any changes and go back to my parent page - which is normal behavior. In my iFarme page (page 55) i have an "apply changes" button, and this button calls a process on page 55 by submitting a value and than it closes the modal dialog. "APPLY Changes" button has pointed to the url: javascript:UpdateRecord(); and page 55 has a script in HTML Header to submit value and close modal dialog:
<script type="text/javascript">
// -- Function to apply changes and close Modal Dialog--
function closePopup(){
   $(function(){parent.$('*').dialog('close');});}
function UpdateRecord(){doSubmit('APPLY_CHANGES');closePopup();}
</script> So, what I want is not to have this "Apply Changes" button in my page 55 which is iFrame page, I want this button to be next to my jQuery modal dialog "CLOSE" button which means I have to change my modal dialog popup script to include "APPLY CHANGES" button where this button will submit value to iFrame page and close my dialog.
I hope whatever is above is readable and understandable.
Thanks

since my previous solution didn't work I did try another way. I did try to create a hidden item in my iFrame page -> pass a values "APPLY_CHANGES" to this item from my "ADD" button in parent dialog window and make my DML process in my iFrame (page 55) to fire conditionally when hidden item in iFrame page has "APPLY_CHANGES" value. So, I did change my dialog window script with iframe again to include this:
$(document.body).append(vRuleBox);
          $("#LinkAssetsBox").dialog({
                        buttons:{"Close":function(){$(this).dialog("close");}
//from here ---------------
,Add:function(){location.href="f?p=&APP_ID.:55:&SESSION.::NO:55:P55_CREATE_REQUEST:APPLY_CHANGES"}
//to here -----------------
},               stack: true,
               modal: true,
                        width: 950,
...and again....it passes the "APPLY_CHANGES" value to my iFrame page item ( i can see that in session view) but my process is not running or may be it is not getting values of my form items in iFrame page.
Any ideas...comments on this???

How to create a button which unloads an iFrame and puts in its position another iFrame?

How to create a button which unloads an iFrame and puts in its position another iFrame?
It is very important for me if anyone could answer...
Thank you all in advance,
Frank

Ok I found it!!

Iframe in web dynpro refreshed automatically when clicking on button

Hello,
I have called standard SAP T-code using webgui in web dynpro component insdie iframe.
whenever I clicked on button. Screen inside iframe refreshed automatically.
Consider tcode having multiple screen. If I clicked on button, iframe getting refreshed and return to first screen of the tcode.
Please do the needful
Thanks & Regards
Kishan Rana

You are using either the built-in Mozilla PDF Viewer or the built-in Chrome PDF VIewer and have a LiveCycle Designer XFA form being viewed. You need to configure the web browser accordingly.
XFA-based PDF forms on Mozilla Firefox and Google Chrome
There are are probably registry entries available for setting this up in the HKEY_CURRENT_USER registry hive for both Mozilla Firefox and Google Chrome, but I don't know them and have not seen them posted on any vendor site. Then again, I haven't looked either.

How do I set the buttons on my website to trigger an iFrame when I hover over them?

How do I set the buttons on my website to trigger an iFrame when I hover over them? At the moment they work when I click on them.
I have tried everything to try and get them to work when I hover over them.
If anybody could point me in the right direction or give me any help it would be greatly appreciated.
imbriggy

I think this would pose a major usability issue for touch screen devices that have no mouse and thus don't respond to mouseover/hover. In that sense, OnClick is much more reliable. But to answer your question, you would need to invoke the event with JavaScript.
Nancy O.

Update available to address iFrame and button issues

We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
Neil

did you check with VBPA Table ?
are you passing parvw field as 'WE'

Flash button: Jump to anchor tag in iframe.

Hi there...
I have a problem with flash button when linking to named anchor in html - iframe. I used the code below:
on (release) {
getURL ("calculator.html#goldvalue", "main");
"main" is name of an iframe in index.html, that opens with calculator.html.
<iframe id="main" src="calculator.html" width="1024" height="500" frameborder="0" scrolling="no" name="main"><p>Your browser doesn't support iframes.</p></iframe>
Any idea how to fix this?
Tnx, A.

"goldvalue" is na anchor name in calculator.html, it's not a function or anything... I'd like flash button to scroll or in another words to jump to middle of the html page. All links do work - except the ones with anchor names. As the matter of fact even calculator.html#goldvalue works as a link, it just doesn't jumps to the #goldvalue.

Interactivate buttons on iframe

Similar Messages

Maybe you are looking for