Interactive Report - How to display Aggregate values in first row

Hi,
I have an interactive report in which I have included aggregate for count.
But the count doesn't show until I navigate to the last page of the report.
Any idea how to display all the aggregate values on the top(in first row), so that the user doesn't have to click next to see these values.
Also when I downloaded the report the aggregate columns are not exported into csv. Any thoughts on this highly appreciated.
Thanks,
Raj.

Any help on this guys ?

Similar Messages

Interactive report: How to display "count" column on total data set?

Hi,
I'm a relative newbie to APEX and would appreciate some help with the following:
I have an interactive report that will usually contain around 8000 rows.
I need to report the total number of distinct values in one of the columns - but I need to get around the limitation of APEX where it only counts the number of rows displayed on the screen.
I thought to create a separate region and use a separate SQL query to show the full total regardless of the number of rows displayed - however, I've now got the problem of not being able to access the interactive report "query", so, for example, if someone running the report adds a filter, I need the total to report with this new filter applied.
Does anyone know if I can:
a) get around the the limitation of only counting the number of rows displayed?
or, if not,
b) how to access the interactive report "query" that is being run?
or
c) any other way of doing this!?
I do hope this makes sense. Thanks in advance for any help....
Helen

Hi all,
Thanks for your responses. They really are much appreciated.
I had hoped to spend some time on this over the weekend - but haven't got round to it. I'll work on it again tomorrow and will certainly look at the thread you mentioned Tony.
Sorry I'm not being very clear about what I want. Why are these things always so hard to explain in words :o)
I'll have another go....
I have an interactive report that would report around, say, 8000 rows. Obviously I don't want to display all 8000 on the screen so I'll probably display them in chunks of 15 rows. If I use the aggregation function on the report, I can add a count of the distinct account numbers to the bottom of the display, but it will only count the ones displayed on the screen. I need the count to be of all the rows - so 8000 instead of 15 - but still displaying only 15 rows. When a user then applies a filter to the report, I need the count to change in accordance with the filter - so if the number of rows returned as a result of the filter is now 4000 instead of 8000, I need the count to now say 4000 instead of 8000 even though still only 15 rows are actually displayed on the screen.
I'll try and pre-empt the questions...
1) There will always be duplicate account numbers in there so the count will never be the actual number of rows - but I'm simplifying above to help explain the problem better
2) Why would they want 8000 rows? Don't ask. I'm sure it's something to do with exporting the lot into an excel spreadsheet but they'll never admit it :o)
I hope this makes more sense......
Thanks again!!
Helen
P.S. Almost forgot again... I'm using Apex 4.1 on the Oracle hosted environment which I assume is 11g.

Interactive Report how to get Item Values

Hi there,
I have created a workflow which is going through 12 pages. At each page the user needs to choose his variables.
This could be the y-axes, x-axes, amount, surname ... etc.
The variables are given to the next page via branch to next page process. Everything works well until I need to create an interactive report out of the choosen variables.
Lets say I have a variable called :P7_XAXIS with static LOV :
Amount,Amount;Date,Date;quantity,quantity
Page 8 is my IR. If I try :
Select :P7_XAXIS from mytable This will not work.
But if I try
Select Date from mytable This will work. Why? In my workflow there are several variables that can be used in a where condition. This also works. But I need to access the values before the condition and I also need to get a chart out of it.

Even if I try
Select (Select :P7_XAXIS from dual) from mytable this will not work in my IR. Just getting no result.

How to display the value of a column in a chart at the top of each column

How to display the value of each column in a chart at the top of each column?

Like this?
Done using chart Inspector.
For details, see Chapter 7, Creating Charts from Numerical Data in the Numbers '09 User Guide. The guide may be downloaded via the Help menu in Numbers.
Regards,
Barry

How to display 7 values of single field in row wise.

hi,
how to display 7 values of single field in row wise.
thankx in advance.

hi ,
do it like this :
1 Place ur UI element in tranparent container with Layout as Row Data and Layout Data as Row Head Data
2 Ur first UI , which contains the first value as Row Head Data ,
3 Others as Row Data
u can do it with Matrix Data as well
if u want to give space , u can use HORIZONTAL GUTTER and set its width to medium / large / Xlarge
also there is a UI element "INVISIBLE ELEMENT" ,
1 u can use this UI element to provide space between ur other UI elements in the view
2 u can insert a text element as well , and in the Text property of the element press ALT + 0160.
u can give the space bw UIs as desired.
regards,
amit

How to display filter values in analyzer

Hi expert,
I want to add filter into analyzer, above data table, I insert a few rows, and add text to hold filters, but after quit from design mode, inserted rows for filters dispear, and its spaces are taken by data table. could you please tell how to display filter values .
Many Thanks,

It is looking like you are saving them as workbooks. It will be possible to maintain fliters if you save with the filters given by workbook properties, not by manual feeding.
let us know with clear expectation if you are not clear with it.

How to display negative values in a screen field of a screen

Hi All,
Please let me know how to display negative values in a screen field of a screen.
thanks

Hi Kishore,
You can do this method. In the screen , create a text field of CHAR instead fo creating an INT4 field.
I have created a field of CHAR of name say TEXT.
In the main program,
declare a variable of the same name ie. TEXT.
data: TEXT(5) TYPE C.
In PBO, just assign the negative values.
It will work.Since there is automatic conversion between character and integer data types, it will work for positive values as well.
Regards,
Sylendra.

PPR Report ,How to display Label with TOTAl

Hi,
How Can i display PPR Report ,How to display Label with TOTAl like
[http://apex.oracle.com/pls/apex/f?p=267:30:]
Thanks
Edited by: 805629 on Jan 6, 2011 3:34 AM

Hi,
For PPR Report:
Select "Yes" in "Enable Partial Page Refresh" item of "Layout and Pagination" region in Report Attributes of that report.
For display Label with TOTAL:
Use "Break Formatting" region in Report Attributes of that report.
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1

When using a interactive report I go to aggregate and no column are there

When using a interactive report I go to aggregate, sum and go to choose my columns but I have no column there what am I missing

Just a guess, but have you checked to make sure there's a numeric column in your report (and not, for example, a varchar column that happens to have numbers)?
-David

ALV: how to display only subtotals and total rows in the output

ALV: how to display only subtotals and total rows in the output
i am getting output
i am getting subtotals for respective fields
but i want to display only subtotals and totals rows in the output
i have tried the
totals_only parameter in slis_layout_alv
but it is not working.

hi,
For TOTAL
For the amount field / quantity field in the field catalog give DO_SUM = 'X' for WHOLE total
For SUBTOTAL
For subtotal you will have to create an internal table sort..Let's say you want to do subtotal for each customer..
DATA: lt_sort type SLIS_T_SORTINFO_ALV,
ls_sort type slis_sortinfo_alv.
CLEAR ls_sort.
ls_sort-spos = 1.
ls_sort-fieldname = 'Give the field name that you do the sum'.
ls_sort-up = 'X'.
ls_sort-subtot = 'X'.
APPEND ls_sort TO lt_sort.
fieldcatalog-do_dum = 'X'.
for subtotals
WA_SORT-FIELDNAME = 'ERSDA'.
WA_SORT-SPOS = '2'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOTAL = 'X'.
APPEND WA_SORT TO IT_SORT.
Refer
http://help.sap.com/saphelp_erp2004/helpdata/en/ee/c8e056d52611d2b468006094192fe3/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/doesnt-function-event-subtotal_text-in-alv-713787
regards,
Prabhu
reward if it is helpful

How to display a fixed number of rows in a page when using CL_GUI_ALV_GRID

Hy experts
How to display a fixed number of rows in a page when using CL_GUI_ALV_GRID?? lets say 500 ?? because my display table it may contain in some cases 10.000 and evidently I can t see all of them..
I have a button in my toolbar witch triggers this event
(display 500 records ) but I don t have the logic to do this only with methods of CL_GUI_ALV_GRID.
can you tell me a standard method of CL_GUI_ALV_GRID witch can help me do this?? any hint will be good..
Till now I was used to add a column to my structure witch represents a flag that is a number corresponding to every 500 records (a batch containing 500 records )
first       500 - flag -> 1
second 500 - flag -> 2
etc..but I m convinced that exists a way of doing this more easy..without damaging my structure..
thanx in advance..don t be shy..reply if you have any hints..

Hi,
if method SET_FILTER_CRITERIA doesn´t help, I think that you must work with 2 internal tables, a counter and a loop for filtering the records to be displayed:
case counter.
when 1.
     loop at int_table1 from 1 to 500.      "<-- your table with all records
       move int_table1 to int_table2
    endloop.
when 2.
     loop at int_table1 from 501 to 1000.
       move int_table1 to int_table2
    endloop.
etc, etc.
Call grid-->SET_TABLE_FOR_FIRST_DISPLAY
   exporting
     IT_OUTTAB = int_table2                "<-- instead of your currently table int_table1

Interactive Report: how to get value of given row/col cell in selected row

Hi -- I have an interactive report. Instead of the default behavior of the link going to a single row view, I want it to
go to a form for editing the row. This means I have to be able to populate the form w/ the correct row's information...
so need to get the value(s) for the PK column(s) in the selected row of the interactive report, so I can select the row
from the database.
How can I do this? I see in the report attributes, Link Column section, I can set Rows Uniquely Identified by, and a Unique
Column (though there could be more than one in a PK). I imagine I'd want to use the rowid, but I'm not sure how the
rowid of the selected IR row can be referenced. And at that point, I'm not sure how to get the IR column value for
that row. (Say I'm on the 8th row and I need the first column... How is the column referenced? By a number, it's name,
its heading?)
Or maybe I'm not on the right track at all...
Ideas?
Thanks,
Carol

Hi Carol,
What I´m trying to do is: defining a button such as when you click it a pl-sql procedure is called, which needs as an input parameter the id of the row selected in my form. what I need first, then, is to get the id of the selected row. how did you get it?
Thanks in advance
Francesco

Interactive Report: how can I display carriage returns?

Hello everybody.
Here is my problem: I created a table containing a field COMMENT varchar2(4000) and using APEX 4.1 I built an interactive report on it.
Users can fill the field COMMENT with sentences on different rows, ex:
" this is the first line
this is the second line
this is the third line"
This is correctly managed in the FORM, where I defined the field COMMENT as 'Text Area', but in the REPORT I wasn't able to set it in a way which permits to see it whit the carriage returns: the content is displayed on one row only : "this is the first linethis is the second linethis is the third line".
I tried and set all the possible field types, but I found no ways to display the content exactly as it is (with carriage returns).
Obviously I cannot use HTML
, since I cannot ask users to digit it when inserting their text.
Could someone suggest me how to reach this result? In need to use the interactive report because the searching/filtering tool is fundamental.
Thanks in advance,
Daniele

>
Please update your forum profile with a real handle instead of "user9211286".
Here is my problem: I created a table containing a field COMMENT varchar2(4000) and using APEX 4.1 I built an interactive report on it.
Users can fill the field COMMENT with sentences on different rows, ex:
" this is the first line
this is the second line
this is the third line"
This is correctly managed in the FORM, where I defined the field COMMENT as 'Text Area', but in the REPORT I wasn't able to set it in a way which permits to see it whit the carriage returns: the content is displayed on one row only : "this is the first linethis is the second linethis is the third line".
I tried and set all the possible field types, but I found no ways to display the content exactly as it is (with carriage returns).
Obviously I cannot use HTML
, since I cannot ask users to digit it when inserting their text.
Could someone suggest me how to reach this result? In need to use the interactive report because the searching/filtering tool is fundamental.Use a CSS style sheet with attribute selectors. Put this in the page HTML Header, replacing the <tt>T_EMP_NAME</tt> etc selectors with the actual <tt>id</tt> attributes of your column headers:
<style type="text/css">
.apexir_WORKSHEET_DATA td[headers="T_EMP_NAME"] {
white-space: pre;
</style>
Interactive Report Control Break disregards HTML Header style.

How to display Month values in SSRS report

Hi All,
I have a requirement to display month values in SSRS Chart. x-axis should display all month names from January till current month. How can I set this properties and show it in a line graph
Thanks & Regards,
Regards RCP

Hi,
The above link is not meeting my requirement. I need January till July to be displayed in x-axis
labels of graph. How this can be achieved ??
Regards RCP
You can create a calendar table on the fly and use it for your dataset to be used in the graph. Use logic as below
http://visakhm.blogspot.in/2010/02/generating-calendar-table.html
For getting January till current month use query as
DECLARE @Start datetime,@End datetime
SELECT @Start = DATEADD(yy,DATEDIFF(yy,0,GETDATE()),0),
@End = GETDATE()
SELECT *
FROM dbo.CalendarTable(@Start,@End,0,1) f
As a long time persistent solution best option would be to create a calendar table in the database.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to limit an Interactive Report Region from displaying.

I have a page which is an interactive report. When you call that page from another one it takes a while as it is selecting all rows (over 10k). Once those rows are retrieved and the user adds a filter criteria it's relatively fast. How do I limit the report from running when I call the page until the user adds a filter?
thanks
John

I'm not sure how this works. If I set it to a really small number say 5 rows it shows only 5 rows upon rendering of that page. However, when I subsequently click on Go for all rows or any other larger number I don't get the larger number. How do I get that portion to work as well?
thanks

Interactive Report - How to display Aggregate values in first row

Similar Messages

Maybe you are looking for