Intercom service for multiple remote sites

We are deploying 180 remote locations with IPT. Each site is connected via a WAN. We have a centralized CallMgr (4.1(3)). Each site will be configured with SRST.
Each site will need to be able to intercom other phones within the site. (so intercom will stay within each site).
Is there a service that will work? asp or jsp.
How well will that service scale?
Is there any third party apps that will provide this service?
Thanks
Trae

There are 3rd party apps out there, Berbee's Informacast is one product I've seen but there's others.
Most (if not all) of the intercom products utilise multicasting to do the audio distribution, so generally that's stopped at your LAN border (your network guys may have it setup otherwise though).
There's an intercom example in the SDK you may want to take a look at, but you'll be looking at further dev work yourself to get something beyond the simple example.
cheers

Similar Messages

Start and stop windows service for multiple remote computers

Hello,
Can someone show me how to Start and Stop windows service for multiple remote computers using Command Prompt or PowerShell or even Java?
Thank you

You asked a pure Windows related question at a pure Java related forum. We have advised you to look for a Windows related forum to post the question. Nothing special. It's like asking a car mechanican to help you with your migraine, he would advise you to look for a general practitioner.
But why are you so surprised and negative about this answer after all? Don't we have to help you? Don't you appreciate help? So be it then, but please stay away then if you keep this attitude.

Running one rmiregistry for multiple remote object servers

Hi,
I don't find any clear answer for this situation. I want that multiple objet servers (running in separated JVMs) share one rmiregistry placed on a dedicated server. Servers stays in a same network (no firewall at all). If this feature is covered, could you give me any example or link that describe the source code ?
Thanks very well for yours answers.
Manuel

Thanks again for your help, and sorry for my weak usage of english language.
I've tried to bind some remote objects from distinct 'physical' hosts (or computers) to a dedicated registry located on another host.
To resume: I want to use one unique registry for multiple remote objects hosts.
EJP you have posted : But they must all be running on the same host as the Registry.
After reading again the official rmi tutorial, I found :
For security reasons, an application can only bind, unbind, or rebind remote object references with a registry running on the same host. This restriction prevents a remote client from removing or overwriting any of the entries in a server's registry. A lookup, however, can be requested from any host, local or remote.
This confirm that I wanted to do was not possible.
To override this limitation, do you think it's possible to write a remote object located on the registry host, that propose a method used from other hosts to register their remote objects ? Something like that:
// Interface
public interface recordFromHost extends Remote {
    int recordObject(String name, Remote obj) throws RemoteException;
// Implementation of interface
public class recordFromHostImpl extends UnicastRemoteObject implements recordFromHost {
    public recordFromHostImpl () throws RemoteException {
        super();
    public int recordObject(String name, Remote obj) {
       int ret=0;
        try {
            Registry registry = LocateRegistry.getRegistry();
            registry.bind(name, obj);
        } catch (Exception e) {
            System.err.println("recordObject exception:");
            e.printStackTrace();
            ret = -1;
    return ret;
// Server code on registry host
public class Serveur {
public static void main(String args[]) {
        // Security manager
        if (System.getSecurityManager() == null) {
            System.setSecurityManager(new SecurityManager());
        // Start of registry
        try{
            LocateRegistry.createRegistry(1099);
        }catch(RemoteException e){
            System.exit(1);
        try {
            String name = "recordFromHost";
            recordFromHost myObj = new recordFromHostImpl ();
            Registry registry = LocateRegistry.getRegistry();
            registry.bind(name, myObj);
        } catch (Exception e) {
            System.err.println("bind exception:");
            e.printStackTrace();
// Code used from a server host to register his remote object in the distant registry
Registry registry = LocateRegistry.getRegistry(registry host adress);
recordFromHost myRecord = (recordFromHost) registry.lookup("recordFromHost");
Create local remote object to register (remoteObject : interface, remoteObjectImpl : implementation)
remoteObject myRemoteObject = new remoteObjectImpl();
// register myRemoteObject
myRecord.recordObject("myRemoteObject", myRemoteObject );
...Finally, a client who want to use myRemoteObject ask the registry for this object, and use it without limitation : the remote object host will not be the registry host.
I hope that you understand what I mean :-)
Manuel

Configuring AD Sites and Services best practice for multiple office site ?

Hi People,
Can anyone here please suggest me or share the link of what is the best practice in configuring the AD Sites and Service for single AD domain with multiple office sites ?
I'd like to know more about the number and the direction of the connection between Domain Controllers in one site to the Data Center and vice versa.
Thanks.
/* Server Support Specialist */

Hi People,
Can anyone here please suggest me or share the link of what is the best practice in configuring the AD Sites and Service for single AD domain with multiple office sites ?
This series can be useful:
Active Directory Structure Guidelines – Part 1
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Database Design for Multiple function site

Hi
I am working on one project which involve multiple function
site, such as
Company Product Catelog, Customer Support Forum, Document
Exchange Engine and
etc...
Normally we will combine ALL TABLEs into one DATABASE.
My question are:
1) Is my break them to individual DATABASE, will it perform
better?
Means Product Catelog and Forum will have different
DATABASE, but they
will using the same DOMAIN NAME.
2) I am worried about the break down and corruption of
DATABASE, so I have the
idea to separate them out. Are my idea correct or wrong?
3) I am seeking for better DATABASE DESIGN, because I know
the database will
become huge in future. I request for your idea and opinion.
Thank you very much.

Creating views: not an option I think. It would involve a lot of programming with 'instead of' triggers etc.
Seperate databases: a good way if the locations are completely independant and do not share information. This involves more DBA work.
Separate schema's in one database: this would make public synonyms impossible, and is probably not a good option.
Adding a location id to tables: the best way I think, and flexible. You can easily add another location, and locations can easily share information.

Just bought WildBlue Sat service for my remote home location, to access internet wirelessly.. Have 3GS , Just bought WildBlue Sat service for my remote home location, to access internet wirelessly.. Have 3GS

Just bought WildBlue Sat service for wireless internet access from my remote location. Have 3GS, MacBook pro w/ Snow Leopard, OSX v.10.6.3, aircard. WildBlue comes with receiver. What else do I need to connect my mac? Can you sketch a config please? Thx, Ms. Rita

Assuming the sat service has an ethernet port, connect your Mac and use System Preferences/Network and the Network Assistant to help.

RMI for multiple remote interfaces

We have a few classes that extend multiple remote interfaces. The stub and
skeleton created by the weblogic rmi compiler have strange names like
WLSkel3f2i4g44322n5l3i1r224p60697473f.class and
WLStub3f2i4g44322n5l3i1r224p60697473f.class.
Is this ok? How can we make it create "normal" class names?
Thanks,
Inbal

try using the -nomanglednames option on the weblogic.rmic compiler.
I think what you've got is OK - it's a result of the clever stubs weblogic
generates for rmi.
It's documented in the "Using weblogic RMI" guide.
-Dominic
Inbal Ronen wrote:
We have a few classes that extend multiple remote interfaces. The stub and
skeleton created by the weblogic rmi compiler have strange names like
WLSkel3f2i4g44322n5l3i1r224p60697473f.class and
WLStub3f2i4g44322n5l3i1r224p60697473f.class.
Is this ok? How can we make it create "normal" class names?
Thanks,
Inbal

How to configure request manager service for multiple website in one web application

I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
Awen

That's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx

Use same URL for multiple SharePoint sites

Hi there,
Our requirement is to create multiple web applications in one Farm (which contains 1 Web Front End, 1 Application Server & 1 DB Server) using 80 port of Web Front End which is having single public IP.
There are number of ways of doing this - One way is to create new domain name for each web application (like www.abc.com; www.xyz.com); another way is to create multiple sub domains in a single domain name like www.sub1.abc.com; www.sub2.abc.com, etc.
However our requirement for URL naming convention for these web applications is "www.[Domain Name]/[Client Name]" (like www.abc.com/client1, www.abc.com/client2, etc)
In SharePoint we can achieve this if we create one Parent site and others as Child site. However we don't want to us this.
So, is their any way where we can form URL of these web applications as "www.[Domain Name]/[Client Name]"
Regards,
Adi

Is there a reason for this? I would think subdomains would be ideal, but just curious on the reasoning. Also, do they need a full web application, or simply different site collections? If you just need site collections, and assuming you
don't have a massive number of them, you could use Managed Paths to explicitly allow a site collection immediately under the root url. Be careful, though, Managed Paths can cause a lot of overhead after you go over 10-15 if you're hardware isn't up for
it (I would assume you wouldn't put 10-15 web apps on the farm anyway, cause that's also not so great).
There really isn't a way to do what you are asking for a full Web Application, only at the site collection level(which should be good from my limited understanding of your scenario)
I am very curious why subdomains wouldn't work, though, as they can all point to the same IP and takes no additional purchasing of domains or anything.
Christopher Webb MCM: SharePoint 2010 MCSM: SharePoint Charter MCT http://blog.christophermichaelwebb.com

Connecting Multiple Remote Sites with VPN Passthrough

I have several Win2003SBS sites requiring VPN passthrough from remote clients some using the VPN Connectoid supplied with the SBS (on the RWW - "Download Connection Manager". The requirement is for an DSL modem router with at least 10 tunnels which also supports GRE. The device should support ADSL2 as a minimum and SDSL is preferred.
A more detailed diagram is attached. Access to the Web Server will be required from both the LAN and WAN sides later.
Any suggestions please?

3700 Series multiservice access routers supports GRE, SDSL, ADSL.Refer the following URL for more information
http://cisco.com/en/US/products/hw/routers/ps282/products_data_sheet09186a00800921f0.html

SQL Command to Start/Stop SQL services for multiple server

From Central server I want to Start/Stop SQL services and SQL Agent service. Is there any SQL command which I can execute on query analyzer which can Start/Stop SQL services?
Rahul

See command line options here using net start
http://msdn.microsoft.com/en-IN/library/hh403394.aspx
You can invoke them using xp_cmdshell from management studio as
ie like below for default instance
EXEC xp_cmdshell 'net start MSSQLSERVER'
EXEC xp_cmdshell 'net start SQLSERVERAGENT'
etc
and below for named instance
EXEC xp_cmdshell 'net start MSSQLSERVER$instancename'
EXEC xp_cmdshell 'net start SQLSERVERAGENT$instancename'
etc
and use net stop for stopping services
EXEC xp_cmdshell 'net start MSSQLSERVER' EXEC xp_cmdshell 'net start SQLSERVERAGENT' etc
EXEC xp_cmdshell 'net start MSSQLSERVER' EXEC xp_cmdshell 'net start SQLSERVERAGENT' etc
EXEC xp_cmdshell 'net start MSSQLSERVER' EXEC xp_cmdshell 'net start SQLSERVERAGENT' etc
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

EventListeners for multiple remote object calls

Hi all,
I have a Flex component that is displaying content from multiple (specifically two) remote object calls. I can call both remote methods, get the results back, pass them off to their respective ItemRenderers, etc. with no trouble. What I need, though, is a way to determine if I get no results back from either function call, to dispatch an event to trigger the next view state, and I don't know how to do that. Something like:
protected function ticketConfigurationStateChangeHandler(event:Event):void
               if(getPackagePromptsResult.lastResult.length == 0 && getTicketPromptsResult.lastResult.length == 0)
                     this.dispatchEvent(new Event("ticketConfigurationStateChange"));
            protected function ticketPrompts_creationCompleteHandler(event:FlexEvent):void
                getTicketPromptsResult.token = registrationAPI.getTicketPrompts();
                getTicketPromptsResult.addEventListener(ResultEvent.RESULT, showTicketConfiguration);
            protected function packagePrompts_creationCompleteHandler(event:FlexEvent):void
                getPackagePromptsResult.token = registrationAPI.getPackageCPrompts();
                getPackagePromptsResult.addEventListener(ResultEvent.RESULT, showPackageConfiguration);
Any suggestions would be greatly appreciated...I know I need the event listeners to be able to get lastResult.length (and have it not be null) but I don't know how to set them up so I can automatically pass the user through the component and onto the next one if there are no results returned without having the user click a button or something similar on an otherwise blank component.
Thanks in advance!
~ Amanda

Hi all,
I have a Flex component that is displaying content from multiple (specifically two) remote object calls. I can call both remote methods, get the results back, pass them off to their respective ItemRenderers, etc. with no trouble. What I need, though, is a way to determine if I get no results back from either function call, to dispatch an event to trigger the next view state, and I don't know how to do that. Something like:
protected function ticketConfigurationStateChangeHandler(event:Event):void
               if(getPackagePromptsResult.lastResult.length == 0 && getTicketPromptsResult.lastResult.length == 0)
                     this.dispatchEvent(new Event("ticketConfigurationStateChange"));
            protected function ticketPrompts_creationCompleteHandler(event:FlexEvent):void
                getTicketPromptsResult.token = registrationAPI.getTicketPrompts();
                getTicketPromptsResult.addEventListener(ResultEvent.RESULT, showTicketConfiguration);
            protected function packagePrompts_creationCompleteHandler(event:FlexEvent):void
                getPackagePromptsResult.token = registrationAPI.getPackageCPrompts();
                getPackagePromptsResult.addEventListener(ResultEvent.RESULT, showPackageConfiguration);
Any suggestions would be greatly appreciated...I know I need the event listeners to be able to get lastResult.length (and have it not be null) but I don't know how to set them up so I can automatically pass the user through the component and onto the next one if there are no results returned without having the user click a button or something similar on an otherwise blank component.
Thanks in advance!
~ Amanda

Login Settings for multiple language sites

I'm using the standard ADDT Control Panel Login Settings for a site that has multi-country and multi-language areas. However, the global redirect pages (login, redirects) can't be customised to each specific country area as they need a direct page reference. How do I get round this so I can have individual page redirections per country?
Ta!

Hi Matthew,
 
 just an idea: let´s assume you´re storing the country areas in the main "users" table like this:
 
 - en
 - de
 - fr
 
 ..., you could...
 
 1. add a recordset to the global redirect page like this:
 
 "SELECT country_area FROM users WHERE user_id" equals the Session Variable kt_login_id
 
 2. implement a simple standard PHP redirection which embeds the recordset´s value, like this:
 
 <?php header('Location: http://www.yoursite.com/page_'.$row_queryname['country_area'].'.php' ) ; ?>
 
 This should translate to "page_en.php", "page_de.php" etc etc
 
 Cheers,
 Günter Schenk
 Adobe Community Expert, Dreamweaver

How to use simple values services for multiple rows ina table

Hi Frnds...
As per my requirment i need to use SVS for multile rows in a table.
The coding goes like this for getting single attribute which is directly under root context.
objSimpleValueSetCurr = wdContext.getNodeInfo().getAttribute("ctx_attribute");
(this is only for context attribute directly placed under root context in the view controller.)
We need to use value node and a value attribute inside this node. And retrieve the same. so need help regarding the code changes.
Regards,
Sudeep

Hi ,
I had tried out your suggestion. Its not working.
The code goes like this, but the data is not getting populated.
"controller_curr" is the value attribute under the node "InitTable" in the controller which is further mapped to view controller with the same structure.
The data is geting printed through the message manager just before the line
divSMT.put(currency,currency); in this code, at the end.
But "divSMT.put" is not able to populate the data.
_________START________
public void currency( )
 //@@begin currency()
 IWDMessageManager msg = wdComponentAPI.getMessageManager();
 ISimpleTypeModifiable objSimpleTypeCurr = null;
 IModifiableSimpleValueSet objSimpleValueSetCurr = null;
 String currency=null;
 String bandg = null;
 Z_Bapi_Get_Curr_Rate_Input authCurrDet = null; //for FCURR
 Try
authCurrDet = new Z_Bapi_Get_Curr_Rate_Input();
 wdContext.nodeZ_Bapi_Get_Curr_Rate_Input().bind(authCurrDet);
 wdContext.nodeZ_Bapi_Get_Curr_Rate_Input().currentZ_Bapi_Get_Curr_Rate_InputElement().modelObject().execute();
IWDAttributeInfo objSimpleValueSetCurr1 = wdContext.nodeInitTable().getNodeInfo().getAttribute("controller_curr");
ISimpleTypeModifiable countryType = objSimpleValueSetCurr1.getModifiableSimpleType();
IModifiableSimpleValueSet divSMT = countryType.getSVServices().getModifiableSimpleValueSet();
int sizeofCurrencyFCURR = wdContext.nodeOPCURROutput().nodeIt_Curr_Rate().size();
msg.reportSuccess("SizeofCurrency FCURR : "+sizeofCurrencyFCURR);
for(int i=0;i<sizeofCurrencyFCURR;i++)
currency = wdContext.nodeOPCURROutput().nodeIt_Curr_Rate().getIt_Curr_RateElementAt(i).getFcurr();
msg.reportSuccess("Currency : "+currency);
divSMT.put(currency,currency);
 catch(Exception e)
//@@end
_________END________
Please look into the issue.
Regards.

Multiple EasyVPN Remote sites using NEM

I am installing 2 ASA 5505s at home offices with dynamic IPs. The EasyVPN server is a ASA585x. I am using the 5505s in NEM mode. I configured a unique DHCP scope on each 5505. I have a dynamic crpto map on the server. I configured unique tunnel groups, group policies and usernames for each site on the server.
This seems to work fine.
Is it normal to configure unique tunnel groups, group policies and usernames for each remote site?

Hi,
I would say yes, since you have full control over each connection profile and group-policy. Usually one single connection profile and group-policy represent one single point of failure.
You could use the same username as long as you allow enough simultaneous logins with the "vpn-simultaneous-login" command under the group-policy settings.
Portu.
Please rate any helpful posts

Intercom service for multiple remote sites

Similar Messages

Maybe you are looking for