Stuck with transported tablespace and ASM
Hi,
I'm on 10.2.0.5.4 and playing with TTS feature .
So I've made TTS on source DB 10.2.0.5 via rman tts feature (auxilary instance) , and copied to cloned database with ASM (same os solaris10).
Now my situation is as follows :
on target I can see TTS1 tablespace
FILE_NAME TABLESPACE_NAME STATUS
+DG1/sol10p/datafile/users.262.763395469 USERS AVAILABLE
+DG1/sol10p/datafile/sysaux.260.763395447 SYSAUX AVAILABLE
+DG1/sol10p/datafile/undotbs1.259.763395423 UNDOTBS1 AVAILABLE
+DG1/sol10p/datafile/system.258.763395387 SYSTEM AVAILABLE
+DG1/sol10p/datafile/example.261.763395463 EXAMPLE AVAILABLE
+DG1/sol10p/datafile/assm.257.763395311 ASSM AVAILABLE
/u01/tts/tts1.274.763488147 TTS1 AVAILABLE
/u01/tts/tts1.272.763487799 TTS1 AVAILABLEbut when trying to copy those files into ASM I'm getting
RMAN> report schema;
Report of database schema
List of Permanent Datafiles
===========================
File Size(MB) Tablespace RB segs Datafile Name
1 510 SYSTEM *** +DG1/sol10p/datafile/system.258.763395387
2 310 UNDOTBS1 *** +DG1/sol10p/datafile/undotbs1.259.763395423
3 250 SYSAUX *** +DG1/sol10p/datafile/sysaux.260.763395447
4 62 USERS *** +DG1/sol10p/datafile/users.262.763395469
5 100 EXAMPLE *** +DG1/sol10p/datafile/example.261.763395463
6 2048 ASSM *** +DG1/sol10p/datafile/assm.257.763395311
List of Temporary Files
=======================
File Size(MB) Tablespace Maxsize(MB) Tempfile Name
1 512 TEMP 512 +DG1/sol10p/tempfile/temp.265.763396585
RMAN> backup as copy datafile '/u01/tts/tts1.274.763488147' format '+DG1';
Starting backup at 03-OCT-11
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/03/2011 20:00:34
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /u01/tts/tts1.274.763488147Please advice .
Regards
GregG
I'm not using catalog (connecting as nocatalog) Hmm....
The files are listed in V$DATAFILE and DBA_DATA_FILES but not in an RMAN REPORT SCHEMA ?
That's curious. V$DATAFILE and RMAN REPORT SCHEMA would both be reading from the controlfile.
What was the sequence of actions to transport the tablespace ? Have you tried reconnecting with RMAN ?
Hemant K Chitale
Similar Messages
-
Transportable Tablespace and Packages/Functions etc
We are currently experimenting with transportable tablespaces. Is it possible to take functions/packages etc or are you limited to tables/data/triggers.
Thanks
ChrisTransport tablespace is available in version 9.2. In that version you need to put the tablespace in read only mode, export the tablespace metadata, copy the tabalespace files, and then import the metadata. Now, I don't believe this will transport the other objects. Someone else chime in if I am incorrect.
What you can do is transport the tabelspace and then run an export rows=n
and then import this empty dump (that will include the procedures/functions.etc) with ignore=y -
Iphone stuck with apple symbol and wont start up
i updated my iphone and when it finished and went to reboot it just stays stuck on the apple symbol it constantly reboots and will never connect to my laptop i dont know what to do if anyone can help please do
Hi,
Luca224 & Ingo2711. Thanks for bringing this topic. on 29th Nov. I faced the same problem on my iPhone 3GS 32GB Firmware 3.1.2, iPhone stuck with apple symbol and wont start up. I have tried with 10 Seconds Sleep/wake-up button + home button to reset. But didn't work. Did google about an hour with many blogs. Finally I made a call to 3 iPhone care and spent 30 minutes and explained whatever I have done; iPhone customer care asked me to go to nearby iPhone service center in Sydney. BUT BY LUCK CLICKED ON iTUNE AND GOT THE OPTION FOR ONLINE FORUM FOR APPLE iPHONE. Many many thanks to Ingo2711 who has given the solution link and also thanks to Luca224 , who raised the issue. I feel, this is a common problem with iPhones those who using iPhone 3GS 3.1.2...... but try the link http://support.apple.com/kb/HT1808 and thanks to Luca224 & Ingo2711. PLEASE FOLLOW THE INSTRUCTION CAREFULY:
1. Verify you have iTunes 7.5 or later. Apple recommends using the latest version of iTunes.
2. Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
3. Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off. _+(in my case - red slider didn't appear, but i pressed the Sleep/Wake button until the iPhone went off, finally it was just off... i was frustrated... tried 3 times with more patience )+_
4. Press and hold the Home button while reconnecting the USB cable to iPhone. When you reconnect the USB to iPhone, the device should then power on. +_( Do exactly as it says)_+
Note: If you see the message "Charging... Please Wait" or you see the screen pictured below, let the device charge for at least 10 minutes to ensure the battery has some charge and then start with step 2 again. +_(True ... for me it happened 3 times)_+
5. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. +_( I was nearly frustrated at my 3rd attempet; my thumb was hurting as I was holding the home button for few minutes..... but finally it worked yahooooooooooooooooo...... suddenly changed my decision.... about going to 3/Apple service center)_+
6. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message:
If you don't see the "Connect to iTunes" screen, then disconnect the USB cable from iPhone and repeat steps 3-6.
Because you must restore iPhone or iPod touch, iTunes will not recover data from the device, but if it was previously synced on the same computer and the same user account, it should restore a backup (if available). See document HT1414, "Updating and Restoring iPhone Software."
If you are still unable to restore the iPhone using this method, check Apple support for further troubleshooting and/or service options.
Note: If you sync both an iPhone and an iPod touch to the same computer, make sure you select the correct backup to restore your settings from (don't select an iPhone backup if you have an iPod touch and don't select an iPod touch backup if you have an iPhone).
**** ( BACKUP FROM YOUR iTUNES : MAC/PC; AS I GOT MY 95% DATA FROM THERE.... GOOD LUCK)******* IF IT WORKS PLEASE POST YOUR EXPERIENCE....*
THANKS -
My clone tool in Lr is stuck in the scissors mode. How do I get it back to normal clone function.
Spending hours with this FRUSTRATION.
CAN SOMEONE HELP ME?DOWNLOADED 5.7 CAN'T POST CLIP BECAUSE WHEN i LET GO OF THE ALT KEY THEY DISAPPEAR.
Fr5.7om: Bob Somrak <[email protected]>
To: Cat Anders <[email protected]>
Sent: Sunday, February 15, 2015 5:22 PM
Subject: lightroom 5.2 my clone tool is stuck with the scissors and won't clone a spot. How do I get rid of the scissors? HELP!!!!!
lightroom 5.2 my clone tool is stuck with the scissors and won't clone a spot. How do I get rid of the scissors? HELP!!!!!
created by Bob Somrak in Photoshop Lightroom - View the full discussionFirst thing to do is update to LR 5.7.1. No use trying to solve a problem on an outdated version. BTW, could you post a screen clip of these SCISSORS? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7197183#7197183 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7197183#7197183 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
when i restored my iphone 5 it shows 4013 and 4005 error and my phone was stuck with apple logo and above some letters where also there in black and white colour . pls say me how to fix this plssss . my email = **********
<E-mail Edited by Host>Wrong Forum
-
Try updating my ipad 2, pop up with error 1602 and now my ipad is stuck with the itune and USB icon on the screen. I tried to restart it, but screen still comes up the same.
See if this page helps http://support.apple.com/kb/TS3694#error1602
-
I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?
If you didn't back it up, your data is gone. There is no "solution" after the fact.
-
I just updated my phone and it is now stuck with usb cable and itunes logo and itunes on my computer says I have to restore. Can I get my phone working again without loosing my photos?
There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore -
while updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?
- What was the error message?
- Try closing iTunes and then disconnect the iPod from the computer. Then reconnect the iPod. If the iPod shows in iTunes then you can try again. However, You should try to resolve the error message first.
- If iTunes does not see the iPod try reetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- I recommend that you come back with the what the error message said and the condition of the iPod and if it is visible in iTunes. -
HT201412 my Ipad screen is stuck with Itunes logo and wont repsond
my Ipad screen is stuck with Itunes logo and wont repsond
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
Character set problem with transportable tablespace
Hi,
I'm trying to import a transportable tablespace with data pump into a database with a different character set compared to the source database. I know this is by default not possible. But there's no violating data in the tablespace that could make it a problem when transfering the TS. So I issued 'ALTER SYSTEM SET "_tts_allow_nchar_mismatch"=true;' on the target to force the import. However; I still get the eror:
ORA-29345: can not plug a tablespace into a database using a different character set
How can I fix this?Hi,
What're the character sets of the source and target database?
A general restriction of transportable tablespace is that the source and target databases must use the same database character set.
Regards
Nat -
Transportable Tablespace in ASM
Hi all,
I want to move one tablespace from a database to another database using the 10g cross platform transportable tablespace.
My source database is running on Linux 32 bit (Little endian format) and the target database is running on AIX (Big endian format). However both databases use the ASM diskgroup as a storage option.
Do I need to convert the endian format of the source tablespace datafile to transport to the target database?
Thanks,Because ASM diskgroup consists of one or more raw
partitions or raw devices, I am wondersing if I still
have to convert the endian format of datafiles..Interesting question.
As you said earlier:
- Linux natively uses Little endian
- AIX natively uses Big endian
You imply that perhaps Linux's ASM 'converts' to an 'Oracle neutral-endian' format whenever something is stored in the ASM disk group. Which would make it identical to AIX's ASM format, also 'converted'.
(I use 'convert' in quotes, as one or the other would not need to get switched, if a specific endian form is maintained.)
Worth investigating further. Although I am not sure why Oracle would introduce the overhead of conversion to-and-from every storage call. -
Transportable tablespace and partitioned objects
Hi,
I have to transport tablespaces which have partitioned objects from one server to another. If anyone has a proven process to perform this operation, please share with us. Following is a sample of violation report sample I got for 1 tablespace:
VIOLATIONS
Partitioned table ARIES.A_BI_BOARD_USAGE is partially contained in the transport
able set: check table partitions by querying sys.dba_tab_partitions
Partitioned table ARIES.A_TESTING_SESSION is partially contained in the transpor
table set: check table partitions by querying sys.dba_tab_partitions
Default Partition (Table) Tablespace A_DATA_SML_000000 for A_BI_BOARD_USAGE not
contained in transportable set
Default Partition (Table) Tablespace A_DATA_SML_000000 for A_TESTING_SESSION not
contained in transportable set
Thanks
SatishHi,
I am trying to transport the whole tablespace. What happened is that during duplication process, somehow few tablespaces in target were in offline mode and so duplication did not ceate the files properly on auxiliary server. Now, I need to get the 3 tablespaces from production to integration enviornment. These tablespaces have lot of partitioned objects. So I am trying to find a way to transport these tablespaces.
Thanks
Satish -
Migrating a new partition table with transportable tablespace
I created a partitioned table with 2 partitions (2010 and 2011) and used transportable tablespace to migrate the data over to a new envionment. My question is, if I decide to add a partition (2012) in the future, can I simply move that new partition along with the associated datafile via transportable tablespace or would I have to move all the partitions (2010, 2011, 2012).
user564785 wrote:
I created a partitioned table with 2 partitions (2010 and 2011) and used transportable tablespace to migrate the data over to a new envionment. My question is, if I decide to add a partition (2012) in the future, can I simply move that new partition along with the associated datafile via transportable tablespace or would I have to move all the partitions (2010, 2011, 2012).Yes why not.
1) create a table as CTAS from 2012 in new Tablespace on source
2) transport the tablespace
3) Add partition to existing partition table Or exchange partition
Oracle has also documented this procedure:
http://docs.oracle.com/cd/B28359_01/server.111/b28310/tspaces013.htm#i1007549 -
Transportable Tablespace and Table Statistics
We are loading a large datawarehouse of about 2Tb, with tables up to 100Gb full of raster images. The database is 9.2.0.7 on Solaris, and we are using Transportable Tablespaces to move datafiles and tablespaces from data integration server to production server.
During the data integration, we calculate statistics on large tables, and it takes forever. We are wondering if these statistics are moved along with the metadata from data integration server to production server. In other words, should we calculate statistics before the tablespace export or after the tablespaces have been set online on the production server.
Thanks,Hi,
Upto my knowledge you dont need to calculate statistics.
Even with export & import command there is a option for statistics.
So when ever you export oracle by default export the statistics of that table.
Hope this helps.
Regards
MMU
Maybe you are looking for
-
Bug USB on MSI K9N SLI Platinium & Athlon X2 3800+
Hello! first,i'm french, so excuse my bad english(i try to do my best!) so, the problem is that i don't have any USB working on my K9N SLI Platinium with my Athlon X2 3800+!(anywhere,all other devices works => lan, sound, storage..) the "controlleur
-
[iOS] Album art not showing for offline tracks
Thread: 921107 915479 934743 970825 968593 966641 971447 937227 Description: It appears that on iOS some people are finding album art is not being displayed for offline tracks. This is predominately found with locally synced files but has affected so
-
After clicking on game icon, it loops me back to my main screen?
when I click on a game ICON, it doesn't let me get into the game, it takes me back to my menu screen...does that mean the game is no longer available??
-
Where can I get a Lightroom preset that turns a portrait into a sketch?
Where can I find a Lightroom that turns a portrait into a sketch?
-
Desktop Content Viewer crashes every time
I can't get the Adobe Content Viewer for the desktop to stop from crashing on my MacBook Air. Even if I launch it separately, outside of InDesign. Anyone know what to do about this? I've reinstalled Folio Producer tools, but to no avail and am desper