Intercompany billing exchange rate is not updated on change of the currency

Hi,
I create a intercompany billing via VF01 with reference to a outbound delivery, and the currency is picking up from the customer master which is USD. But I need to change the currency to be the same as the PO which is GBP. So I change the currency field from USD to GBP in VF01 (both header and item level), the exchange rate field remain unchanged and still showing the USD rate instead, and the price is wrong.
Anyone know what happend to this? Appreciate your advice.
Thanks,
YH

Hi Damu,
Once you change the header currency, line item currency will be changed also.
My problem is even I've change the currency to let say GBP, the exchange rate shown in the billing document is still in USD rate, but NOT in GBP rate.

Similar Messages

Alternate Exchange Rate Type Not Picked while converting from Document Currency to Group Currency

Hello Gurus,
We have setup an alternate Exchange Rate type MNB for rate M for the postings happening in Hungary. Local currency is HUF. Group currency is USD.
If the document currency is, lets say, EUR, latest MNB rate is correctly picked up (EUR to HUF) and postings are correctly converted into local currency (HUF).
Although, for the same document, when a group currency is being calculated (EUR to USD), exchange rate type M is being picked up. Same happens if document currency is HUF. Even then, the conversion is based on exchange rate type M.
Is this a normal SAP behavior? How to prevent/correct this? This is also throwing off balances when we check in FAGLB03 or BSEG values in local and group currencies. In OB22, we have local currency1 and local currency 2 setup with exchange rate type M and we may not want to make any changes there as it is setup at global level.
Do we need to run any valuations after the fact? if so, how?
Thank you for your inputs in advance.
Regards,
Sagar

Hi,
You mentioned that "in OB22, we have local currency1 and local currency 2 setup with exchange rate type M". Then, I'm wondering how MNB is picked up for the first local curr. conversion to HUF? It should be 'M' instead. There must be some settings in your instance for such behavior. Can you check that?
Actually, Group Curr. conversion happens with the rate defined for 2nd Loc.Curr.in OB22 which is 'M' in your case. Therefore, all the transactions are converted with M instead of MNB.
Since you can't change OB22 per global co.policy, the exch.rate defined in OBA7 will overrule OB22. However, you've to make sure it's set up for all doc.types which are affected and posted in different curr. than HUF.
As a workaround, another thought would be to maintain the same conversion rate for both exch.rate types MNB & M, for eg. HUF > USD rate is the same both exch.rate type MNB & M. This way, you ensure all transactions are posted with correct exch.rate irrespective of whatever rate type is used.
From business, & global org. perspective, I'm sure they are sending the 'M' exch.rates to all their sister concerns monthly, so they would like to consolidate results as per standard rate in their system. Then, why ,as a local company, would you like to fiddle with standard process? It's a management decision, please run them through again before going ahead.
Thanks,
Nirav

"An Exchange Rate Does not Exist" error while creating an item

Hi..
Pre-requisites: RMS is installed without base data
We are trying to create an item in RMS by filling the required information in "Item Maintenance window" and "Supplier details" screen. After this is done when we select the "Retail by Zone" link and the application prompts an error message : "An Exchange Rate Does not Exist", and all the values in "Retail by zone" screen are not populated. How do we ressolve this?
Thanks in Advance
Yamini

Also, make sure that if a currency has a rate entry for example, 01-jul-2010, then make sure that ALL other currencies have a rate entry for 01-jul-2010, even if the rate has not changed for other currencies - a little trick I learned from an Oracle consultant.
Alan

Why exchange rate is not displayed correctly when I create the PO in SRM?

Hi Gurus,
Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
But when the PO is transmitted to R/3, the exchange rate is the correct.
My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?

Hi Muthu,
I'm in Extended classic.
I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
Two checks of budget exist:
1.- When creating PO (exchange rate date of delivery date of the SC's item)
2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
Now my question is: It is a standard behavior? (to take different exchange rate)

Exchange rate difference not going to the correct GL account

Hello,
In the transaction OB09, I have given the GL account 702000 for exchange rate difference realized loss and gain.
I have also maintained the exchange rates in the transaction OB08.
In transaction F-44(clear vendor), I give the foreign curreny(EUR) in the entry screen. When I do a charge off difference, however, I need to enter the amount in local currency(USD) because our bank operates in the local currency. When I do a document simulate, it puts the exchange rate difference into another GL account (703030 - that we have defined for unauthorized deductions) and not the one defined for the exchange rate difference(702000). This does not happen if I enter the amount also in the foreign currency.
Could anyone tell me the reason for this and the correction measures.
Any helpful suggestion will be greatly appreciated.
Thanks,
Rugmani
Edited by: Rugmani Rajan on Aug 27, 2008 11:35 AM

Hello,
The original problem is resolved. The current exchange rate was not getting uploaded to the system and as a result, the old exchange rate was being used. So it was putting the difference into the other account.
That has given rise to another problem. We use the TBEX to upload exchange rates from a centrally maintained spreadsheet. The upload is giving the following errors:
Securities master data EUR do not exist!
Interest rate master data CNY is missing
Suggestions and correction measures will be greatly appreciated.
Thanks,
Rugmani

Excise rates are not updated

Hi friends
When i am creating ARE3 document, in item details Duty rates tabe- excise rates are showing 0, whereas Duty values are coming,
I have checked in table j_1iexcdtl - duty rates are not updated and duty values are updated
How to update the table j_1iexcdtl
Thanx and Regards
srini

Dear MBS
Thanks for reply
I am doing deemed export process
I am using TAXINN calculation procedure and pricing procedure was ZDEEM.
as you said i have already done the classify condition types as below
ZDEEM - JEXP - BED percentage
ZDEEM - JECS - ECS percentage
ZDEEM - JA1X - AT1 percentatge
I have checked the table and it was updated,
now i am trying to create ARE3 document but the values are not coming into ARE3 document, only ECS percentage is coming and all the values are showing 0
and how to resolve the issue
Regard
srini

How to determine fixed exchange rate or not on contract SD?

Hi all,
I am looking how we can determine if a contract has got fixed exchange rate or not?
In header data (first tab) we can see currency and exchange rate but I do not see a flag (as in PO) for fixing this one...
Thanks for your help.
David31

Hi,
We can check the and maintain exchange rate by following setting,
IMG->SAP NetWeaver>General Settings->Currencies--->Enter Exchange Rates
There are other setting also under the same currencies tab.
Thanks,
Rasik

Exchange Distribution Groups not updating in Active Directory

Hi all,
I'm not sure if this is intended behaviour or not, but any distribution group we create in Exchange ECP does not update in Active Directory Users and Computers. Any particular reason why?
For example, we have a user group called "Managers" and we've recently created a new group called Area Managers. We've since moved some people out of Managers and put them in Area Managers, however in Active Directory all we see is the Managers
group with all the old managers in there. The OU for the Area Managers group has been set correctly.
Best regards,
Please remember to mark the replies as helpful if they help, or as answers if they answer your question. Please also unmark the answers if they provide no help.
Zach Roberts
Independent Microsoft Community Support Advisor
Disclaimer: I don't work for Microsoft. Any advice given is my own and does not represent Microsoft.
Follow me on Twitter:
@WindowsZach

Hi,
Please run the following command to confirm the members of two groups.
Get-DistributionGroupMember -Identity Area Managers
Get-DistributionGroupMember -Identity Managers
I also suggest to remove the member from “Managers” in AD then check the members of “Managers” in EAC to check this problem.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Exchange rate Difference not to capitaliuze to Asset

Dear All,
When i capitalize the asset thru MIGO,If any exchange rate differences coming between MIGO and MIRO the current system is capitalizing the Exchange rate differences to asset,As per my new requirement the Exchange Rate diffrences must post to Exchange Rate Gain/Loss account not to Capitalize to Asset at the time of MIRO.My MIGO is valuated Goods Receipt.
Please help to provide the solution.
Thanks & Regards
Kumar

Hi,
Could you please elaborate where in need to assign Exchange rate difference account in OBYC,My current rquirement is the Exchange rate differnce between MIGO and MIRO should not eb capitalize to asset,I need to post to Exchange rate Difference account.
Thanks & Regards
Kumar

Exchange rate account not defined

While doing F-04 for a particular bank incoming clearing account, I am getting an error saying : exchange rate account not defined for G/L account and currency INR.
All the postings in the account are in INR and I have also done settings in OBA1 for KDF.
Please help
Thanks

Why would I need to maintain exchange rate settings if all entries are in local currency?
One more observation:
During f-04 clearing, when I toggle between local currency and clearing currency, there is a difference of 25000000.
Any ideas?
Thanks

CDESK "Bill of Document is not update."

Hello,
The Bill of Documents (BOD) is not update when I make the checkin of an Assembly using the CDESK trough CAD integration ProE.
Do I have to mark some parameter of CDESK_CUS so that happens?
Regards
Diogo Santos.

Olá Niranjan.
My situation is the following.
Normal process.
I create a new structure (ASM) with 3 children in the ProEngineer. Then I execute the function that loads that structure in the CadView. When I click in the option Originals >> Original Check-in, the files are stored in Vault and one BOD it is created containing the 3 children.
My Problems.
If I execute the check-out of that ASM, soon after I include a new child or I modify the quantity of an existent child and I make the check-in again, BOD is not updated the new structure of ASM accordingly. (The BOD is not updated in relation to the new structure of ASM.)
Regards,
Diogo.

Accruals not updated for Changed Rebate agreement when VBOF performed.

Hi Pals,
Need your assistance in solving an incident . our client has changed the valid to date of the rebate agreement on 29.04.2014 in VBO2 from 28.02.1014 to 31.12.2014, later it was observed that the rebate accruals for the blling documents generated after 28.02.104 to till date were not updated even after running the report VBOF. There are 15000 invoices after 29.04.2014 , hence it is difficult to check which invoices carries my rebate condition type.
hence pls advice on
1. how to find out the invoices for the changed agreement .
2. How to update the accruals for the invoices that were created after 28.02.2014 to till date.
An early reply would be highly appreciated.
Br
Krishna.K

Dear krishna
i tried your scenario--so after changing the validity for my Material rebate agreement type--i ran VBOF(SDBONT06)--so system has shown the updated billing doc with rebate which was not having any rebate condition earlier.
Have you tried by retrieving all the billing docs created after service render date of 28th Feb14.
Please take all the billing docs created after this date from VBRK table and you check some random billings docs whether rebate condition type is active with condition record or not.
(other wise you try with by executing condition record numbers in KONV(doc condition number--then followed by VBRK)
pl update us..
Phanikumar

Hi - my Mu was "buggy" and would not update - so i threw the APP in the trash - but now CC will not allow me to Re-Install because it thinks i already have the APP - any advice?

hi - my Mu was "buggy" and would not update - so i threw the APP in the trash - but now CC will not allow me to Re-Install because it thinks i already have the APP - any advice?

restore your app from the trash and then properly uninstall.
if that fails, CC desktop lists applications as "Up to Date" when not installed

I have iCloud on my iMac, macbook and iPhone. However, when I update my contacts on one, it does not update on any of the other devices. The calendar seems to be working. Any suggestions?

I have iCloud on my iMac, macbook and iPhone. However, when I update my contacts on one, it does not update on any of the other devices. The calendar seems to be working. Any suggestions?

On the iMac and MacBook open System Preferences > iCloud
Deselect the box next to Contacts, then reselect it then restart the Macs.
On the iPhone tap Settings > iCloud
Switch Contacts off then back on then restart the iPhone.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

Help can not update my CS5 on the new PC

Help can not update my CS5 on the new PC

I don't know whether you are running Windows or Mac OS, so I will link you to the Product updates page.
Look under Photoshop, choose your OS and look under CS5 for the 12.0.4 Multilingual Update (MUL). You simply download and install.
Adobe Camera Raw 6.7 is the latest and you download and install that.
Under Product updates look for Bridge and apply all updates.
CS5 is quite old and the updater doesn't work as it should so you have do the updates manually.

Intercompany billing exchange rate is not updated on change of the currency

Similar Messages

Maybe you are looking for