Interconnecting cisco switches with non-cisco switches
I need help concerning interconnecting two Cisco switches (3550s) using a non-Cisco switch or hub on the LAN. I have noticed that the two Cisco switches connected using a non-Cisco switch are able to communicate well, however a PC connected to the non-Cisco switch/hub can not ping any device on the LAN. The non-Cisco device is a working one. When the two Cisco switches are connected using a Cisco switch, PCs connected to the interconnecting switch are able to ping. Whats the explanation? Please help.
Building configuration...
Current configuration : 3342 bytes
! No configuration change since last restart
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
clock timezone GMT -2
ip subnet-zero
ip rcmd rcp-enable
ip rcmd remote-username cwuser
spanning-tree mode pvst
spanning-tree extend system-id
interface FastEthernet0/1
switchport mode dynamic desirable
interface FastEthernet0/2
switchport mode dynamic desirable
interface FastEthernet0/3
switchport mode dynamic desirable
interface FastEthernet0/4
switchport mode dynamic desirable
interface FastEthernet0/5
switchport mode dynamic desirable
interface FastEthernet0/6
switchport mode dynamic desirable
interface FastEthernet0/7
switchport mode dynamic desirable
interface FastEthernet0/8
switchport mode dynamic desirable
interface FastEthernet0/9
switchport mode dynamic desirable
interface FastEthernet0/10
switchport mode dynamic desirable
interface FastEthernet0/11
switchport mode dynamic desirable
interface FastEthernet0/12
switchport mode dynamic desirable
interface FastEthernet0/13
switchport mode dynamic desirable
interface FastEthernet0/14
switchport mode dynamic desirable
interface FastEthernet0/15
switchport mode dynamic desirable
interface FastEthernet0/16
switchport mode dynamic desirable
interface FastEthernet0/17
switchport mode dynamic desirable
interface FastEthernet0/18
switchport mode dynamic desirable
interface FastEthernet0/19
switchport mode dynamic desirable
interface FastEthernet0/20
switchport mode dynamic desirable
interface FastEthernet0/21
switchport mode dynamic desirable
interface FastEthernet0/22
switchport mode dynamic desirable
interface FastEthernet0/23
switchport mode dynamic desirable
interface FastEthernet0/24
switchport mode dynamic desirable
interface GigabitEthernet0/1
switchport mode dynamic desirable
interface GigabitEthernet0/2
switchport mode dynamic desirable
interface Vlan1
ip address
ip default-gateway
ip classless
ip http server
snmp-server community
snmp-server community
snmp-server location
snmp-server system-shutdown
snmp-server enable traps snmp authentication warmstart linkdown linkup coldstart
snmp-server enable traps config
snmp-server enable traps entity
snmp-server enable traps flash insertion removal
snmp-server enable traps bridge
snmp-server enable traps stpx
snmp-server enable traps rtr
snmp-server enable traps port-security
snmp-server enable traps vtp
snmp-server enable traps vlancreate
snmp-server enable traps vlandelete
snmp-server enable traps envmon fan shutdown supply temperature status
snmp-server enable traps MAC-Notification
snmp-server enable traps hsrp
snmp-server enable traps cluster
snmp-server enable traps copy-config
snmp-server enable traps syslog
snmp-server enable traps vlan-membership
line con 0
line vty 0 4
login
line vty 5 15
login
ntp clock-period 17180064
end
Similar Messages
-
I understand that access points can be configured to forwards all the probe requests to cisco wifi controller. cisco MSE(mobility service engine) gets the probes from wifi controller to find the location of the mobile devices.
My question, can cisco MSE(mobility service engine) be configured to work with non-cisco access points?No and the reason why is the NMSP communication from the MSE to the WLC. Other vendors don't support this so there is no communication happening.
-Scott -
Auto Smartports with non-Cisco devices
I have used auto smartports in the past and have been successful creating macros that use mac-addresses.
My question is can I create a macro that works with non-Cisco devices that are CDP capable?
We have Motorolla access points that use CDP and I would like to use auto smartports to put them on their own VLANs.
Can it be done using CDP? What version of the IOS would I need to be on? Currently the 3750-Xs are on 12.2.(55).
Are there any guides or configuration examples? I've searched but have been unsuccessful in find anything so far.
I have seen some articles that reference device sensors and device profiles, but have no idea where to begin.
Thanks in advance for your support.You may need to create a Cisco TAC case for this.
If not, then move this thread to the EEM section. If the Moto AP supports CDP then you can get someone (like Joe Clark) to build a small EEM script.
EEM is supported up to the 3560/3750. -
Can WAE be integrated with non-cisco devices?
So far, all documentation that I read, WAE is used in conjunction with Cisco devices. Can WAE be integrated with non-cisco devices?
I guess, In-line mode should work ok, but how about off-path mode? An example or link will be appreciated.
Thanks!
JoeHi Joe,
It should be possible to use WAAS with non-cisco routers, as long as they support WCCP.
There are no documents on this because, the configuration from WAAS point of view would be the same, and the router configuration would depend on the vendor.
Regards
Daniel -
Error when import file with non-english character
Hi,<br /><br />I have images file with non-english character (unicode), for example ABC<X>.png where <X> is non-english character such as japanese, chinese, etc.<br /><br />Whenever I want to import the file to After Effects (right click -> import -> file), I always encounter error:<br /><br />Finding file/dir info for the file "C:\...\ABC?.png" -- file not found (-43) (3::30)<br />Can't import file "ABC?.png": unsupported filetype or extension. (0::1)<br /><br />My PC is Windows XP Professional 2002 SP2 English.<br /><br />How to solve this problem?<br /><br />Thanks
Adjust your system language settings. Proper file name conventions require a consistent Unicode environment, so install the respective foreign language support files or switch the language system-wide. Mixing different zones/ code ranges is always a bad idea. If your system is not in Japanese, AE will always misinterpret the characters and refuse to import. If that's not feasible, simply rename the files.
Mylenium -
Screen locked with non-English keyboard layout selected
Hello,
I use two keyboard character sets for keyboard. The switch between them is Command-Space.
I also have password requirement for waking up or going from screen saver.
Now if screensaver starts with non-English layout selected, I'm not able to login:
password is not accepted because keyboard layout is not English and switching
to English layout does not work in unlocking window.
Is there any way to change layout while in the unlock window?
ThanksYes you are right, this is not a bug, it's just bad user interface. Just imagine the following scenario...
Writing a paper, switching to Greek to enter a couple of characters and leaving the mac idle for 5 mins.
The lock screen comes up asking for a password, unfortunately the user didn't change the language
before the mac was left idle and there is no option to change the language in the lock screen.
User has to hard reset to access the mac and let's hope that the user was saving his paper frequenlty.
So from a coding point of view this is not a bug, but from a user interface design it is a huge flaw -
Configuring IPIB with non-default partition key
Hello
I want to put IB HCA port into non-default partition to create separate network on my IB fabric. On IB switch (Voltaire ISR9096) I created network with non-default partition key 0x7ffe and add HCA port to this partition.
But this IB-VPPA was displayed as unconfigured on Solaris host
ib::3BA0001004181,ffff,ipib IB-VPPA connected configured ok
ib::3BA0001004182,fffe,ipib IB-VPPA connected unconfigured unknown
ib::3BA0001004182,ffff,ipib IB-VPPA connected configured okConfiguration of new VPPA with cfgadm was unsuccessful:
# cfgadm -c configure ib::3BA0001004182,fffe,ipib
Configure the device: /devices/ib:fabric::3BA0001004182,fffe,ipib
This operation will suspend activity on the IB device
Continue (yes/no)? yes
cfgadm: Hardware specific failure: configure operation failed ap_id: /devices/ib:fabric::3BA0001004182,fffe,ipibI unconfigured VPPA with default partition key (0xffff) on HCA port 0x3BA0001004182 and issued cfgadm for VPPA with pkey 0xfffe again - the same effect.
I tried this on Solaris 10 8/07 and OpenSolaris b72 with the same result - no success ;)
Is it possible to configure VPPA with non-default pkey on Solaris ?
Is it possible to configure more than 1 IPIB VPPA on single HCA port ?
How to perform these configurations ?
Thanks in advance.
Regards,
Denishi
I was able to setup the listener to serve both databases using netmgr, thanks. Apparently I was trying to use the wrong tool for this previously.
Now i'm able to access the EM Database Control and it seems to be working fine though i get the following error message
Logged in As SYS
Error
java.lang.Exception: Number of responses does not match queries
Database Instance: devel.foo.bar
Now, i'd like to be able to use EM for administering two separate databases (running on the same host). Do i need to migrate the database control somehow to grid control? How do i do that?
What about security? I'd like to use SSL and limit connections to selected clients only.
regards,
aspa -
Airplay not working with non-apple router
I use an airport express only for playing music in a remote location. It stopped working after I switched my main wireless router from a Time Capsule to a Linksys running Tomato USB firmware.
The Express is set up as "join a wireless network" with the correct SSID and password. The light on the Express is green and the main router status page shows it is connected, but Airplay cannot see the Express from either iTunes on my macbook or my iPhone. Also I cannot see the device in Airport Utility. When I connect the Express to my computer with ethernet, Airport Utility can see it and so can iTunes.
I have another Express hooked to the network via ethernet and everything works fine with that one.
Surely Airplay should work with non-apple wireless routers. Any suggestions would be appreciated.
thanksFactory reset the express, and try to make it join again...
-
What is possible with non oracle components in the EMGC 10g release 3
Hello,
What is possible with non oracle components in the EMGC 10g release 3
Our customer wants to also monitor and maintain non oracle components with EMGC 10g release 3.
Some non oracle components are:
Routers,
Firewalls,
Application Servers,
Switches,
Mail Servers,
DNS/DHCP servers,
Print Servers,
File Servers,
NTP,
Citrix,
Terminal Server,
Lotus Notes,
Etc etc.
Is there a document on which non oracle components can be monitored in the EMGC and what can be maintained with these components?
Regards,
Tim AbdoelhafiezkhanTake a look into Plug-ins, there are some none-oracle ones pre built by Oracle and others.
There's a forum about Extensibility in the current category here.
Also, for further extensibility, the new Connector Framework looks interesting, see the OEM Integration Guide. -
Sharing icloud calendars with non icloud users
Anyone have a suggestion on how to share my ical icloud calendars with non-icloud users?
Can't seem to share with MobileMe - and Tungle.com doesn't support it either. What about google calendars? Would that be a good work around or end up duplicating entries somehow if they're all synced.
Please advise.Ok Apple... I was sooooo excited about moving my whole team to iCloud, I've already got us setup and our upcoming events are being entered as I write. Then.... I discovered.... The fatal flaw....
While most of my people are apple users, I still have an employee that isn't and isn't ever going to be. No big deal right, they should just get read only access while the "in crowd" gets the cool toys. Except....
See screenshot below, I can EITHER publish read-only to a url OR share through iCloud... NOT BOTH. So in order for my one non-apple employee to see the calender, I have to give up the ability for all the others to make changes... making this calendar service just as ineffective as the one I was trying to replace!
This would be such an easy thing to fix, but I suspect it was a conscious decision to incentivize more people to switch to all apple. Yet I just can't get everybody to do that, I can't force an employee to buy an iPhone and I sure ain't gonna pay for it. So I'm stuck. Next stop... Google Calendar. -
Hello Everyone,
I would like to create SSRS single select dropdown list parameter (it is using MDX query in dataset) with "None" option at the top. Note: this parameter is dependent parameter and getting filtered based on the selection of another parameter.
How can I add hard-coded "None" text at the top of the parameter values? Can Union function help me to add this hard-coded value? The purpose is, when user selects None from the dropdown ignore the condition of the parameter from MDX query else
use the selected value in query condition.
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.htmlHi Ankit,
In your scenario, you can achieve your requirement in report level other than in query. Add a Filter like:
Expression: =IIF(Parameters!Name.Value="None",1,Fields!Name.Value)
Operator:=
Value: =IIF(Parameters!Name.Value="None",1,Parameters!Name.Value)
In this case, report will ignore this parameter, and show all the records on the report when selecting “None” value. I have tested it on my local environment, the screenshots below are for you reference.
Reference:
Add a Filter to a Dataset (Report Builder and SSRS)
Regards,
Charlie Liao
TechNet Community Support -
BI-IP with non SAP environment
Hi,
How is BI-IP suitable for Planning , Budgeting and Forecasting with non-SAP environment?
Regards,
URHi UR,
BI-IP works on top of BI (datawarehouse). If you mean load data from non sap into BI and then plan with IP, it can be a good solution, if you mean plan data outside BI it is not possible.
br
Michele -
Problem with Non-English Fields Output to PDF by JASPER in JDev10.1.3
I am using jsprx files(designed in i-report) to generate pdf reports out of an oracle database.
The non-English fields are shown correctly when I output the report into an HTML or when I view it with JasperView.
If I try making PDF files (JasperExportManager.exportReportToPdfFile) the static fields containing e.g.Arabic/Chineese characters won't be displayed and dynamic fields from the database with non-English contents will be shown as ??? or null.
I received some suggestions about using PARAMETERS to feed the report instead of FIELDS, which I think can not be helpful in this case and in general.
I think this should be a common problem. These are the components I am using:
itext-1.4.7. jar
commons-digester- 1.7.zip
jasperreports- 1.2.8.jar
Any comment or help is appreciated.
Thanks
FarbodI am using jsprx files(designed in i-report) to generate pdf reports out of an oracle database.
The non-English fields are shown correctly when I output the report into an HTML or when I view it with JasperView.
If I try making PDF files (JasperExportManager.exportReportToPdfFile) the static fields containing e.g.Arabic/Chineese characters won't be displayed and dynamic fields from the database with non-English contents will be shown as ??? or null.
I received some suggestions about using PARAMETERS to feed the report instead of FIELDS, which I think can not be helpful in this case and in general.
I think this should be a common problem. These are the components I am using:
itext-1.4.7. jar
commons-digester- 1.7.zip
jasperreports- 1.2.8.jar
Any comment or help is appreciated.
Thanks
Farbod -
Problem description:
My MacBook Pro is running really slow. Applications won’t open or take up to 10 min.
EtreCheck version: 2.1.5 (108)
Report generated December 27, 2014 at 9:15:58 PM CST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: one day 6:55:8
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HD (disk1) / [Startup]: 498.88 GB (5.04 GB free) (Low!)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.epson.driver.EPSONProjectorUDAudio (1.30 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
4 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.wdhelper.plist
[running] com.seagate.TBDecorator.plist [Support]
5 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.carbonite.launchd.carbonitealerts.plist [Support]
[running] com.carbonite.launchd.carbonitestatus.plist [Support]
[loaded] com.coupons.coupond.plist [Support]
[loaded] com.hp.help.tocgenerator.plist [Support]
[loaded] com.trendmicro.itis.dca.plist [Support]
[running] com.trendmicro.itis.uimgmt.agent.plist [Support]
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist [Support]
[running] com.carbonite.launchd.carbonitedaemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[running] com.trendmicro.icore.av.plist [Support]
[running] com.trendmicro.icore.main.plist [Support]
[running] com.trendmicro.icore.wp.plist [Support]
[running] com.trendmicro.itis.plugin.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.jdibackup.JustCloud.autostart.plist [Support]
[invalid?] com.jdibackup.JustCloud.backupstart.plist [Support]
[loaded] com.trendmicro.itis.uninstaller.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
bomgar-scc-20130819-104735 UNKNOWN (missing value)
bomgar-scc-20130905-143949 UNKNOWN (missing value)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/Resources/WDSecurityHelper.app)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
bomgar-scc-20130819-104735 UNKNOWN (missing value)
bomgar-scc-20130905-143949 UNKNOWN (missing value)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 [Support]
CouponPrinter-FireFox_v2: Version: 5.0.5 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.223 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
User internet Plug-ins: ℹ️
npBcsMcTcIO: Version: Unknown [Support]
Safari Extensions: ℹ️
Trend Micro Toolbar [Installed]
3rd Party Preference Panes: ℹ️
Carbonite [Support]
Flash Player [Support]
Paragon NTFS for Mac ® OS X [Support]
Seagate Dashboard for Mac OSX [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
HD: Disk size: 498.88 GB Disk used: 493.84 GB
Destinations:
Jens Seagate Backup [Local]
Total size: 999.86 GB
Total number of backups: 6
Oldest backup: 2014-06-24 10:33:56 +0000
Last backup: 2014-12-17 17:14:18 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 493.84 GB X 3)
My Passport for Mac [Local]
Total size: 2.00 TB
Total number of backups: 14
Oldest backup: 2013-08-21 19:19:35 +0000
Last backup: 2014-12-19 11:44:23 +0000
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
6% coreaudiod
5% CarboniteDaemon
4% iMovie
3% JustCloud
3% Wondershare Player
Top Processes by Memory: ℹ️
335 MB iPhoto Library Manager
180 MB Finder
142 MB iMovie
70 MB Preview
51 MB Microsoft Word
Virtual Memory Information: ℹ️
149 MB Free RAM
1.04 GB Active RAM
897 MB Inactive RAM
1.17 GB Wired RAM
30.53 GB Page-ins
1.42 GB Page-outs
Diagnostics Information: ℹ️
Dec 26, 2014, 05:17:12 PM /Library/Logs/DiagnosticReports/iPhoto_2014-12-26-171712_[redacted].cpu_resourc e.diag [Details]
Dec 26, 2014, 03:47:17 PM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-154717_[redacted].cp u_resource.diag [Details]
Dec 26, 2014, 02:22:01 PM Self test - passed
Dec 26, 2014, 11:48:03 AM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-114803_[redacted].cp u_resource.diag [Details]You have nearly run out of disk space. Either purchase a larger one or start cleaning out the one you have?
-
Can't get the attachment filename out of a Part (with non ascii characters)
Hello, all and happy new year :)
My issue is with non ascii filename in attachments... Yes i've read the FAQ : http://www.oracle.com/technetwork/java/faq-135477.html#encodefilename
I can't get the filename out of the BodyPart for those kind of attachments
here's my unit test :
* contains various parts from various mailer encoded in different ways...
private enum EncodedFileNamePart{
OUTLOOK("Content-Type: text/plain;\n name=\"=?iso-8859-1?Q?c'estd=E9j=E0no=EBl=E7ac'estcool.txt?=\" \nContent-Transfer-Encoding: 7bit\nContent-Disposition: attachment;\n filename=\"=?iso-8859-1?Q?c'estd=E9j=E0no=EBl=E7ac'estcool.txt?=\" \n\nnoel 2010\n","c'estdéjànoëlçac'estcool.txt"),
GMAIL("Content-Type: text/plain; charset=US-ASCII; name=\"=?ISO-8859-1?B?ZOlq4G5v62znYWNlc3Rjb29sLnR4dA==?=\"\nContent-Disposition: attachment; filename=\"=?ISO-8859-1?B?ZOlq4G5v62znYWNlc3Rjb29sLnR4dA==?=\"\nContent-Transfer-Encoding: base64\nX-Attachment-Id: f_giityr5r0\n\namluZ2xlIGJlbGxzIQo=\n","déjànoëlçacestcool.txt"),
THUNDERBIRD("Content-Type: text/plain;\n name=\"=?ISO-8859-1?Q?d=E9j=E0no=EBl=E7acestcool=2Etxt?=\"\nContent-Transfer-Encoding: 7bit\nContent-Disposition: attachment;\n filename*0*=ISO-8859-1''%64%E9%6A%E0%6E%6F%EB%6C%E7%61%63%65%73%74%63%6F;\n filename*1*=%6F%6C%2E%74%78%74\n\njingle bells!\n","déjànoëlçacestcool.txt"),
EVOLUTION("Content-Disposition: attachment; filename*=ISO-8859-1''d%E9j%E0no%EBl.txt\nContent-Type: text/plain; name*=ISO-8859-1''d%E9j%E0no%EBl.txt; charset=\"UTF-8\" \nContent-Transfer-Encoding: 7bit\n\njingle bells\n","déjànoël.txt"),
String content=null;
String target=null;
private EncodedFileNamePart(String content,String target){
this.content=content;
this.target=target;
public Part get(){
try{
ByteArrayInputStream bis = new ByteArrayInputStream(this.content.getBytes());
Part part = new MimeBodyPart(bis);
bis.close();
return part;
catch(Throwable e){
return null;
public String getTarget(){
return this.target;
@Test
public void testJavamailDecode() throws MessagingException, UnsupportedEncodingException{
System.setProperty("mail.mime.encodefilename", "true");
System.setProperty("mail.mime.decodefilename", "true");
for(EncodedFileNamePart part : EncodedFileNamePart.values())
assertEquals(part.name(),MimeUtility.decodeText(part.get().getFileName()),part.getTarget());
I take a NullPointerExcepion in the decodeText because getFileName() return null for the EVOLUTION case, and work well with OUTLOOK, THUNDERBIRD and GMAIL.
Evolution's content type is "Content-Disposition: attachment; filename*=ISO-8859-1''d%E9j%E0no%EBl.txt" wich doesn't look like the other (looks like the RFC 2616 or RFC5987 to do it.)
How can i handle this situation except by writting my own decoder?
Thanks for your answers!
Edited by: user13619058 on 4 janv. 2011 07:44Set the System property "mail.mime.decodeparameters" to "true" to enable the RFC 2231 support.
See the javadocs for the javax.mail.internet package for the list of properties.
Yes, the FAQ entry should contain those details as well. -
When I send a message in a group with non-iPhone users it appears as "New Multimedia Message." One of my friends in the group also has an iPhone and his doesn't appear this way, how do I change my settings so it appears as a normal text message and not an mms?
iOS: Troubleshooting Messages - Apple Support
Send a group message with your iPhone, iPad, or iPod touch - Apple Support
Send messages with your iPhone, iPad, or iPod touch - Apple Support
Maybe you are looking for
-
I have been having several annoying problems with iTunes for the past several months... 1) Library content not showing after folder relocation: First, in order to free up space on my C drive, I wanted to relocate my iTunes folder to a new 1TB hard dr
-
Can i assign a collective srch help for select option in list display
can i assign a collective srch help for select option in list display
-
Audio Video Front Panel m8277c
I bought an HP Pavillion Media Center model m8277c and it has front panel input for video, svideo, and audio. Is this connection directly connected to the motherboard? Or is this connection passing through the PCI TV Tuner at the back? I tried to con
-
Newbe Question: Setting a cursor image from a source file
I have a panel that is dynamiclly loaded with images from files. I wanted to set the cursor to the image, originally I was going to load a sprite with the image and have it follow the cursor but I figured that it might be better using the CursorManag
-
I bought an iBook 600MHz 14-in locally. (Be warned that this anecdotal intro. may having nothing to do with the main matter.) The seller stated that the Li-Ion batt. had been kaput for two years. Sure 'nuff, the battery toiled not, neither did it spi