Interface Builder: Problems with selecting items?

Hello, does someone else have experience with IB selection problems?
I did the following:
-Created a textured window
-Dragged a toolbar into it
-Dragged a NSScrollView into the textured window
-Gave the NSScrollView a white background
-Scaled the NSScrollView so that it extended to the edges of the window
-Dragged 4xCheckboxes into the NSScrollView
After this I had major problems in selecting any of the Checkboxes. It seemed like if I moved the mouse around a bit and kept clicking, then in some point I was able to get the checkbox selected. However this happened only after 5-30 clicks. Also the scaling controls of the checkboxes were almost impossible to find and to use.
Is there a button or a checkbox in the IB configuration, or a keyboard key or something in the IB that would make selecting things a bit easier. Or am I just doing something wrong?

Interface Builder is pretty buggy to begin with, so that is always going to be a hassle. You normally have to double-click inside scroll views to get to the actual contained items. Also, you can drill down through the scroll view in the object window in tree view and select the checkbox itself.

Similar Messages

F-32 : Problem with Open Item selection

Hi,
We have a strange problem with open Item selection for customer clearing in t-code F-32
In My QA system
if I input spl GL indicator ="*" and uncheck Normal OI tick,
the system selects all open items,
(those with spl GL indicator and those without spl GL indicator)
In My Dev system
If I input spl GL indicator ="*" and uncheck Normal OI tick
the system does not select any open items,
Please let me know which setting controls this behaviour ?
Regards
Sachin

Hello,
Check your data in FBL5N for the option "Special GL Transactions". There could be that there is no data in the system with SPECIAL GL TRANSACTIONS.
In F-32, there is no value like *
You need to input right Special GL Indicator. "*" will not work here.
I am sure in both the systems if you put "*" and UNTICK your normal transaction, you will NOT get any items to clear.
Please DOUBLE CHECK whether you have unticked normal transaction.
Regards,
Ravi

InDesign refuses to update via Creative Cloud - each attempt fails within 30 seconds - no problem with other items - any suggestions?

InDesign refuses to update via Creative Cloud - each attempt fails within 30 seconds - no problem with other items - any suggestions?

What is the error message you receive?
There is a manual way to do updates - All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.

You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

Problem with selecting text in Adobe Reader XI

Hi all, I am encountering a problem with Adobe Reader XI and it is very strange I could not find an alike issue on the internet so I guess I have to submit a question with it.
So here it is, I am using Adobe Reader XI Version 11.0.2, operating system: Windows 7. I do not know it starts from when but it has the problem with selecting text - to be copied in pdf documents. I ensure that the documents are not scanned documents but word-based documents (or whatever you call it, sorry I cannot think of a proper name for it).
Normally, you will select the text/paragraph you want to copy and the text/paragraph will be highlighted, but the problem in this case that I cannot select the text/paragraph, the blinking pointer (| <-- blinking pointer) will just stays at the same location so I cannot select/highlight anything to be copied. It happens oftenly, not all the time but 90%.
This is very annoying as my work involves very much with copying text from pdf documents, I have to close the pdf file and then open it again so I can select the text but then after the first copying or second (if I am lucky), the problem happens again. For a few text I have to type it myself, for a paragraph I have to close all opening pdf documents and open again so I could select the paragraph to copy. I ran out of my patience for this, it causes trouble and extra time for me just to copying those texts from pdf documents. Does this problem happen to anyone and do you have a solution for this? I would much appreciate if you could help me out, thank you!

Yeah, I totally agree, this is very strange. I have always been using Adobe Reader but this problem only occurred ~three months ago. It must be that some software newly installed I think. But I have no idea.
About your additional question, after selecting the texts and Ctrl + C, the texts are copied and nothing strange happens. It's just that right after I managed to copy the texts, it takes me a while to be able to select the texts again. For your information, I just tested to select the texts and then pressed Ctrl, the problem happened. And then I tried pressing C and then others letters, it all led to the problem.
I guess I have to stick with left-clicked + Copy until I/someone figure the source of this problem. Thanks a lot for your help!

Problem with: select 'c' as X from dual

Problem with 'select 'c' as X from dual'
I get 2 different results when I execute the above with SQLPlus (or java) depending on the instance I am connected to. For one instance the result is a single character and for the other the character is padded with blanks to 32 chars in the SQLPlus window (and java). Does anyone know what database setting causes this to happen? Is it a version issue ?
Test #1: Oracle 9.2.0.6 - SQLPlus result is padded with blanks
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:27:58 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.6.0 - Production
SQL> select 'c' as X from dual;
X
c
SQL>
Test #2 Oracle 9.2.0.1 SQLPlus result is a single character.
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:29:27 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL> select 'c' as X from dual;
X
c
SQL>

Using 9.2.0.6 On AIX 5.2 I get the single byte result:
UT1 > select 'c' as X from dual;
X
c
If the databases are on different Oracle Homes you may want to check the sqlplus global logon files for any set commands.
If you executed the two sql statements from different OS directories you may also want to check your sqlpath for sqlplus .logon files.
Try issueing clear columns and repeating the statement. Are the results the same?
HTH -- Mark D Powell --

Export Release Build - Problem with Server Settings

Hello, i have a big problem and i searched the whole day yesterday but didnt found an answer...
I started a Flex Mobile and PHP Project. The Project has a Data/Services included wich loads some customer from a database (sql)... for the first a
used Zend and try it local (http://localhost and used the htdocs Folder of Zend)... EVERYTHING WORKS PRETTY FINE... so NOW my problem
I wanted to export this project to a release build for my android phone... so the first warning of Flash Builder ist that the project ist currently configured to access data services from a local url. Before exporting the application, you may need to deploy your services to a remote server, then change the server root URL for your project. Click here to change server settings.
When i click the button i get the server setting.
Web root: C:\Program Files (x86)\Zend\Apache2\htdocs
Root URL: http://localhost
whe i change it now i get an eror:"The selected web root folder does not exist (i attached i screenshot of it).
i entered de domain of my server (i also tried the ip) at Root URL. And i think there ist a problem with the Web root...? i get scary

i know WHY Flashbuilder tells me that i have to change the setting when i deploy on the device
my problem ist that i got this error...
and the domain wich i have in the screenshot should only explain how i tried it...
i entered my server url (the real domain) and i entered the folder "app" wich i have created via ftp on my server...
BUT i also get this error (lik in the screenshot)
i think at ROOT URL i cant make lot mistakes .... http://myserver.de or the ip
but i think maybe my web root ist incorrect? i entered here the folder wich is directliy on my server...?
i dont know exactly but i got an error like in the screen

LabVIEW 8.5.1 Build Problem With LV2010 Installed

I am experiencing a problem when building an application installer using LabVIEW 8.5.1. I have built this application many time before but since installing LabVIEW 2010 I can no longer build the installer.
I have tried to buiuld the application on a Windows 7 PC and a Windows XP machine. My minimum requirment in my build options was Windows 2000, I changed that to XP but it made no difference.
I get the following error message:
CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> NI_MDF.lvlib:MDFDistCopyList_GetCount.vi
Loading product deployment information
Adding files to installer
*** WARNING ***
Cannot enforce the requested minimum operating system restriction because the deployment engine only supports Windows XP or later. Resetting minimum restriction to Windows XP or later.
Done adding files
Preparing to build deployment
Copying products from distributions
*** Error: Fatal runtime error. (Error code -10)
*** Error Details:
Error in MDF API function: _MDFDistCopyList_GetCount
Access violation! Structured exception code 3221225477
*** End Error Report
Done building deployment
Has anyone else come across this?
Thanks in advance.

Thanks Andrew.
It didn't help. After three days of trying, I did get one system to build without error. I'm currently trying to get another system to build.
It looks like the Access violation is caused by the deployment utility not asking to change to DVD 3 for CVI after the product caches has been cleared (To fix the error code -40 problem). Restoring the CVI runtime (NI LabWindows_CVI 2009 Service Pack 1 Run-Time Engine [9.1.1450]) to the Product Cache seems to fix the problem.
The status log doesn't show enough information to figure out the problems. Looking at the end of the Detailed_Installer.log is pretty much manditory.
My recomendation is to build first with "Install TestStand Engine" and the various "Driver and Components..." turned off and then slowly enable the ones wanted.
Also, it saves a lot of pain and suffering to do at least one deployment with "Copy Installers to Product Cache by Default" turned on before doing an upgrade so you don't have to go search for old DVD's.
After a lot of trial and error, I believe these are the steps I went through to finally get it to work:
1. Close TestStand, LabView, and Deployment Utility
2. Delete all in C:\Program Files\National Instruments\Shared\ProductCache, except the CVI Runtime
3. Delete all in C:\Documents and Settings\All Users\Application Data\National Instruments\MDF\ProductCache, except runtime 7.1.1
There seems to be something wrong with the .NET language pack installation. It always seems to generate errors.
3. Run DotNet20x86langpack.msi on the Device Driver DVD at Products\DotNet20langpack_x86_Installer\ and uninstall.
4. Run DotNet20x86langpack.msi and install.
5. Put DVD 1 back in.
Got an error with the .Net installer so. . .
6. Uninstall at D:\Distributions\LV\Products\DotNet20_x86_Installer\DotNet20x86
7. Install at D:\Distributions\LV_SE\Products\DotNet20_x86_Installer\DotNet20x86
8. Again Install at D:\Distributions\LV\Products\DotNet20_x86_Installer\DotNet20x86
9. Run TestStand, LabView (if using VI's), and the Deployment Utility.
Runtime 8.5.1 should install automatically and ask to reboot the system. Go ahead reboot and run Teststand, etc. again.
10. In global settings, 'clear prompt before'. . . , and select 'copy installers to product cache by default'
11. On Installer Options tab, clear "Install TestStand Engine".
12. Build - ALWAYS 'remove all files from this folder before building'
It "should" build. If not, fix any errors.
12. Select Install TestStand Engine.
13. Select Engine Options... and clear all check boxes (except runtime 7.1.1)
14. Build again (make sure DVD 1 is in)
15. Install other Engine Options, Drivers and Components.
16. Build again (make sure DVD 1 is in)

Problem with SELECT WHERE IN

I'm having a problem with a SELECT clause...
the variables...
<cfset MyString=#getProducts.matches_with#>
<cfset myArrayList = ListToArray(MyString)>
the query...
SELECT *
FROM pricelist
WHERE supplier_code IN ('#myArrayList[1]#' , '#myArrayList[2]#')
The problem is, the select clause is only ever retrieving one row, despite their being several matches
The clause works fine when I change the WHERE line to
WHERE supplier_code IN ('E1775' , 'R1771')
What am I doing wrong here ?

Just wanted to say thanks all for the advice - I'm back on track now.
As you know I had a field 'matches_with' in the merchandise table which contains a comma separated list, which I now accept is bad design.
I wrote the following code to take each field and put it into a new table called matches_with, which contains two fields
product_code , matches_with_product_code. All done.
<cfloop query="getData">
    
    <cfset myArray = ListToArray(#getData.matches_with#)>
     
    <cfif #ArrayLen(myArray)# gt 0>
        
        <cfloop from="1" to="#ArrayLen(myArray)#" index="i">
            <cfquery name="insert" datasource="foo">
                
                INSERT INTO 00_matches_with (product_code, matches_with_product_code)
                VALUES ('#getData.product_code#' , '#myArray[i]#')
            </cfquery>
        </cfloop>
    </cfif>
</cfloop>

INVOIC IDOC - E1EDK28 Problem with selection of multiple bank accounts

Hi SAP-Experts!
I have a problem with house banks in outgoing invoice IDOC INVOIC.
We have maintained several house banks in one company code with up to 3 different account ID's.
I was wondering why there is (in my point of view) the wrong bank account populated in one ot the IDOC segments E1EDK28.
What I found out while debugging the code which fills the internal table it012k is, that he selects only the first row from table t012k
(select * from t012k up to 1 rows).
We have already implemented the OSS notes concerning currency dependency and SEPA.
By switching the account ID sequence in sandbox system, e.g. from EUR to SEK, the program picks now the "correct" bank details.
From my Point of view this cannot be a porper logic always to pick the first entry.
Has anyone experienced that issue, too? Is there any solution for this problem (in standard).
If not, I will raise an OSS call at SAP for this.
Thanks for any thoughts!
Stefan

When you enter bank details in master, update field "Partner bank type" LFBK-BVTYP with free form value, may be currency is good choice.
During invoice entry, this field is available for update, update which bank to be used for payment of this invoice. You may build logic to populate this field, like substitution to populate currency in this field during invoice posting.
During payment, system checks value in field Partner bank type in invoice and selects corresponding bank.
Hope this helps.

Build problem with Maven

Hi.
I have upgraded from 1.5 APT to the 1.6 method of doing compile time annotations, and I am runing into a problem trying to build a jar containing my annotations processor.
I get the error from maven (mvn package)
[INFO] Compilation failure
error: Bad service configuration file, or exception thrown while constructing Processor object: javax.annotation.processing.Processor: Provider annotations.processing.processors.CodeAnnotationProcessor not found
I have the following directory structure
src
--main
----java
------annotations
--------processing
----------processors
------------CodeAnnotationProcessor.java
----------annotations
------------CodeAnnotation.java
----resources
------META-INF
--------service
----------javax.annotation.processing.Processor
I build this with the following with maven
<project xmlns="http://maven.apache.org/POM/4.0.0"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
    <modelVersion>4.0.0</modelVersion>
    <groupId>mygroup</groupId>
    <artifactId>annotations-processor</artifactId>
    <packaging>jar</packaging>
    <version>1.0.0</version>
    <name>annotations-processor</name>
    <url>http://maven.apache.org</url>
    <dependencies>
        <dependency>
            <groupId>com.sun</groupId>
            <artifactId>tools</artifactId>
            <version>1.4.2</version>
            <scope>system</scope>
            <systemPath>C:/Java/jdk1.6.0_10/lib/tools.jar</systemPath>
        </dependency>
    </dependencies>
    <build>
        <plugins>
            <plugin>
                <artifactId>maven-compiler-plugin</artifactId>
                <configuration>
                    <source>1.6</source>
                    <target>1.6</target>
                </configuration>
            </plugin>
        </plugins>
    </build>
</project>The javax.annotation.processing.Processor file contains
annotations.processing.processors.CodeAnnotationProcessorAny my
package annotations.processing.processors;
import javax.annotation.processing.AbstractProcessor;
import javax.annotation.processing.RoundEnvironment;
import javax.annotation.processing.SupportedSourceVersion;
import javax.annotation.processing.SupportedAnnotationTypes;
import javax.lang.model.element.TypeElement;
import javax.lang.model.SourceVersion;
import java.util.Set;
@SupportedAnnotationTypes(
        "annotations.processing.annotations.CodeAnnotation")
@SupportedSourceVersion(SourceVersion.RELEASE_6)
public class CodeAnnotationProcessor extends AbstractProcessor {
    public boolean process(Set<? extends TypeElement> annotations,
                           RoundEnvironment roundEnv) {
        return true;
}And my CodeAnnotation is as follows
package annotations.processing.annotations;
import java.lang.annotation.Target;
import java.lang.annotation.ElementType;
import java.lang.annotation.Retention;
import java.lang.annotation.RetentionPolicy;
@Target(ElementType.TYPE)
@Retention(RetentionPolicy.SOURCE)
public @interface CodeAnnotation {
}

Milesy wrote:
Hi.
I have upgraded from 1.5 APT to the 1.6 method of doing compile time annotations, and I am runing into a problem trying to build a jar containing my annotations processor.
I get the error from maven (mvn package)
[INFO] Compilation failure
error: Bad service configuration file, or exception thrown while constructing Processor object: javax.annotation.processing.Processor: Provider annotations.processing.processors.CodeAnnotationProcessor not foundFor me it worked when I used the settings
<plugins>
<plugin>
      <groupId>org.apache.maven.plugins</groupId>
      <artifactId>maven-compiler-plugin</artifactId>
      <configuration>
        <source>1.6</source>
        <target>1.6</target>
        <fork>true</fork>
        <executable>${java.home}/../bin/javac</executable>
        <compilerArgument>-proc:none</compilerArgument>
      </configuration>
    </plugin>
</plugins>
...Forking the compiler is perhaps not the best option, but its just for the annotation processor.

Problems with synchronizations items and partners

Hi,
I have problems with synchronizations from SAP B1 to SAP E-
commerce 5.9.6
When I run Synch. manager, there are some error messages in Synchlog
and some items and business partners are synchronized and some not
synchronized.
Error messages:
1)
Completed account list synch with unhandled error:object reference not set to an instance of an object.
2)
Completed parts list synch with unhandled error:
object reference not set to an instance of an object.
at NetPoint.SynchSBO.SBOObjects.SBOItem.SBOToNetPoint()
at NetPoint.SynchSBO.SBOObjects.SBOItem.SynchItemList()
at NetPoint.SynchSBO.Synch.SynchPartList()
Thanks,
Milos Vich

Hi Milos,
If nothing at all has synchronized, I would first double check your connection settings and passwords.
If the synch appears to to be connecting correctly, you will need to look at the data that it is failing on.
The synch queue is the prx_transaction_queue table in the Business One database. The object_type column refers to a Business One object. 2 for business partner and 4 for items. The list_of_cols_val_tab_del is the key in the associated table. For business partners that is OCRD.CardCode and items OITM.ItemCode.
First determine that there is no bad data in the queue. Bad data is typically defined as null or empty strings in the list_of_cols_val_tab_del column.
Try running the following for business partners:
select *
from prx_transaction_queue
where object_type = 2 and (list_of_cols_val_tab_del is null or list_of_cols_val_tab_del = '')
And this for Items.
select *
from prx_transaction_queue
where object_type = 4 and (list_of_cols_val_tab_del is null or list_of_cols_val_tab_del = '')
If there are nulls or empty strings in the list_of_cols_val_tab_del column, delete them.
If not, take a look at the first records in the queue.
select top 1 *
from prx_transaction_queue
where object_type = 2
order by tmstmp
and for items:
select top 1 *
from prx_transaction_queue
where object_type = 4
order by tmstmp
Change the transaction_type to "X" (remember what is was, because you will need to change it back). Changing this value will remove the item from the synch.
Rerun the synch.
If it runs at this point, there is probably data in the records that the synch was not expecting. The business partner data will need to be examined. Tics in key values (CardCode, Address Name, contact name, itemcode) may cause problems.
If this is the case, you might want to contact support to try to track the problem down.
Another source of problems may be database collation. We can talk about that if none of the above works.

Problem with Line Item display of G/L account

Hi,
I am struggling with a typical problem that I have two company codes in two different countries. I have created a tax account with Open Item management and Line Item display in both the company codes.
When I am trying to post vendor invoices, taxes are being posted on line item wise in one company code but not doing so in other company code eventhough the attributes of the G/L account are same.
G/L accounts, tax condition types and account keys are same in both the cases.
Can any body give me an idea to fix the problem.
thanks in advance,
Mallik

HI,
check the condition types you've defined for the both of the countries
sprofin accting-f/a gl sett-tax on sales/pur -basic settings-check cal procd--define cond types
there is a check box named item condition see whether it is ticked for the another company's condn type.
because due to this only it takes the condn item wise.
reward pts if it helps.
Regards

Problem with an item line

Hi
One of my customers has created an order with two item lines (10 and 20)
The first has been delivered and the second item line was used to create a Purchase Order (NB).
Subsequenlty they found out that they actually needed to delete line 20 which was blocked due to the PO. They have deleted the PO item line but the PO still exists and blocks for deletion of order item line 20.
For now the client has agreed to use the 'reason for rejection' function but they would like the PO deleted so that they can delete order line 20.
How do I delete the PO?
Thx

Hello,
I suppose you used the third party item category for the second line item - 20. So the system first creates a purchase requisition for this item & then this purchase requisition is referred for creating a purchase order.
Now for line item 20, after sales order the subsequent documents will be
1. Purchase requisition.
2. Purchase order.
SAP doesn't allow to delete an item if a subsequent document exist in relation to it. Now in this case, you have cancelled/deleted the item from the PO but still the line item 20 lies in the Purchase requisition. It will have to deleted from the PR also before deleting it from the sales order.
Go to VA02 - enter your sales order number - double click on the line item 20 - go to schedule lines - scroll towards the right side to see the purchase requisition (PR) number.
Now go to ME52N - select the purchase requisition number - delete the line item 20 from here - save the PR.
Now try to delete the line item 20 from the sales order, the system should allow.
Reward points if solution helps.
With best regards,
Allabaqsh G. Patil.

BMW 335i ipod interface connection problem with ipod classic 80GB

Hi all, i have a 2007 BMW 335i with dealer installed ipod interface, and i been using it since, it's simply i just connect ipod with the cable in the glove compartment and leave it there, and it charges and stanby, when i start up the car the audio jumps right to where i left off on the ipod and it also let me control it with iDrive. after about one and half year of usage, i think there is something wrong with my ipod or i dont know for sure, well here is the problem, when i start the car it will play music from the ipod and i can control it from iDrive and everything but after about 5-10 mins, the music stop, and my iDrive shows weird playlist, and i need to unplug the ipod and replug again to have it connect and then it will stop by itself, after 5-10 mins, any of you guys have a bmw with the ipod interface have this problem?? i dont really know if it's my ipod problem or my bmw ipod interface problem. anyone can help me with this? thank you!

That is most likely going to be a problem with your iPod, not the interface.
Have you tried Resetting the iPod? (hold down the menu and center buttons for six seconds).
If that fails to work, try Restoring the iPod in iTunes.

Interface Builder: Problems with selecting items?

Similar Messages

Maybe you are looking for