Interface Feature Request

Illustrator CS6 has enhanced its Interface like the brightness control feature. In this context, I just want to share the possibilities and need of some more interface faeture.
First, I wish that there was a control button to increase / decrease the size of the Toolbar items or may be the font sizes in the panels(Menu Bar, Control Bar etc). This will be particularly helpful, when we work in a very large screen. eg. I work in a 27" monitor and sometimes I find it difficult to see the Text and the Toolbar icons as I sit little away from the monitor due to its bigger screen. In Coreldraw, there are 3 button sizes (Large, medium & Small) for the Tools to be viewed inside the toolbar. So the same can be done for ai. If already provided, please let me know how to find the option.
Secondly, it is obvious that it will take more space if we increase the button size of the tools and hence, may not accomodate all the Tools item in a single column in the toolbar. So in that case, we have to opt for 2 column toolbar (as Illustrator & Photoshop supports both single & double column toolbar). Now, many of the people work with several Plug-ins which also comes under the toolbar and thus making it bulkier. So it may be useful that there should be option for more than 2 column Toolbar (I am not sure if it automatically makes way for the 3rd column, when the first 2 columns are full).

Wrong place for your suggestions. If you want to report this to Apple, send bug reports and enhancement requests via its Bug Reporter system. To do this, join the Apple Developer Connection (ADC)—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report/enhancement request. The nice thing with this procedure is that you get a response and a follow-up number; thus, starting a dialog with engineering.

Similar Messages

Finder/mail/dock interface - Feature Request

Why not consider the option of integrating the Dock to the permanent bar at top of screen? Most of the bar is blank - why not utilize that available space instead of taking up another area with the dock? This could be an additional option to the current locations.
It would be more elegant (IMHO) to have the dock at the top position - with the added option to have the dock icons appear as greyscale (an option already offered by Adobe for their icon in Photoshop)
Mail Alert: When dock is in "hide" mode, there is no visual cue for new mail (using apple mail) Consider adding a small widget to flag new email(s). The widget would reside at top right of screen & indicate # of new messages -same as in dock icon.

Wrong place for your suggestions. If you want to report this to Apple, send bug reports and enhancement requests via its Bug Reporter system. To do this, join the Apple Developer Connection (ADC)—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report/enhancement request. The nice thing with this procedure is that you get a response and a follow-up number; thus, starting a dialog with engineering.

Rejected feature request - Tabbed Interface

Hello,
first: I accept the decision to reject a feature request.
But: is there a special reason to do so, since Tabbed Interface is among the top weighted requests.
At the moment I have >50 connections because I have to support and develop more than one application each with production and at least 3 test DBs. Each connection has 20 nodes for types (tables, views...) each type has x nodes for objects. Thats a lot of scrolling to do. Closing the nodes after selecting an object is not really helpful, because then you have to open them again to select another.
If not tabbed, perhaps splitting the connections is possible: one frame for the connections and below a second frame for the content of the selected connection.
Regards
Marcus
http://htmldb.oracle.com/pls/otn/f?p=42626:39:2176755897334077::NO::P39_ID:2001

For me this is definitely in my Top-5 of requests. Shame it's rejected...
I imagine the change would take so much time and effort it's undoable right now... but after a few years when sqldev is more mature?
It probably would imply changing the framework also, which is competence of the JDeveloper team.
I see the reasons for postponing, but plainly rejecting?
Hoping on a future revision of the request,
K.

FEATURE REQUEST: Enhanced Texture Options in FW

Recently, a forum user was asking how to change the color of a texture in Fireworks to red or blue. In particular, he/she was struggling with attempting to apply a texture to a white object, and it wasn't showing up.
http://forums.adobe.com/thread/1006694?tstart=0
The question got me thinking about textures, how they're created and how they're applied. Textures are a unique and distinctive feature of Fireworks. On the one hand, the interface for textures is very simple to use and almost magical; on the other hand, it's surprisingly limited. The concept is great, but the implementation seems only half-baked.
With this in mind, I'd like to suggest a few simple ways that textures could be made more fluid and versatile in Fireworks.
First, a little background...
WHAT IS A TEXTURE?
In the world of Fireworks, a texture is basically a type of pattern that's applied to an object. However, unlike a pattern fill, textures include transparency and integrate with the existing fill content (color, gradient or pattern). They're suggestive of textures in the real world, which are often tactile and defined visually by light and shadow.
Texture graphics are most commonly grayscale ("black and white") in GIF or PNG format. Applied within the application, the graphics are converted "on the fly" to white-on-transparency. If the Transparent option is checked, the graphic is converted into a sort of mask, making the "textured" areas invisible instead of white.
And that's about it.
So what if you'd like to apply a dark texture to a white object? Sorry, it can't be done. What if you'd like to apply a texture in color? It can't be done. What if you'd like to reverse or invert the pattern of the texture? Can't be done.
Well, in fact, these things can be done, but not directly. They require workarounds such as cloning the object and placing the clone above or beneath the original, applying textures as pattern fills (instead of as textures) and adding effects like Color Fill, Invert, and Convert to Alpha, or editing the texture file directly, saving out a new copy, etc. In short, there are unintuitive ways to accomplish these goals that lead to bloated effects lists and layers or that require extra time and care.
HOW CAN TEXTURES BE IMPROVED?
First of all, does it make any sense that textures are applied exclusively in white? Not really. In the real world, a texture can be defined not just by light but by shadow. And even shadows can have color. This means that, at minimum, it would make sense to allow for the application of a texture in black, and, at maximum, in any chosen color.
Secondly, textures are relative. They represent change to an existing surface. Sometimes, it might make sense to highlight the texture itself; other times, the surface around the texture. This means that being able to quickly reverse the figure-ground relationship of a texture would be a very handy feature.
With the above concerns in mind, I've devised three 'user interface' scenarios, presented here in order of most conservative to most extreme. The first scenario is the least powerful but still doubles the number of possible outcomes (compared to the existing interface). The second scenario may be the most logical of the bunch and represents a modest evolution of the existing interface, while increasing the number of potential outcomes even further. The third scenario allows for the application of any color to a texture but also represents the biggest change to the existing interface; that said, it's also quite compact.
Scenario 1: Invert option
The idea here is simply to add an Invert checkbox to the existing options. Checking this option would convert white to black, allowing for the application of dark textures to white or light-colored objects. In "Transparent" mode, this option would invert or reverse the figure-ground relationship of the existing texture.
Scenario 2: Dropdown menu plus Reverse option
Here, the Transparent checkbox is replaced by a dropdown menu that includes 3 mutually exclusive options: White, Black, or Transparent. Checking the "Reverse" option would invert the figure-ground relationship of the texture. This scenario allows for 6 possible outcomes in place of the existing 2, and is actually more logical than the first scenario, which conflates two options.
Scenario 3: Color picker plus Reverse option
Here, the Transparent checkbox is removed, and in its place, a color chip/palette is added to allow for the selection of any color to be applied to a texture. (Choosing Fill: None would create Transparency.) Again, a "Reverse" option would invert the figure-ground relationship of the texture. This scenario differs most from the existing interface but is quite compact and allows for the greatest number of outcomes.
SO WHAT CAN YOU DO?
I've submitted a feature request to Adobe's official site:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
When it comes to bugs and/or feature requests, every vote counts. If you care about this issue, I encourage you to submit your own feature request to the above URL, referencing this post if desired. Feel free to copy and paste the feature request below or write your own. (Be aware that there is a 2,000 character limit to the "issue description" of a bug report or feature request, and the following report is very close to that maximum.)
FEATURE REQUEST
Product name: Fireworks
Product Version: 12.0.0.236
Product language: English
*******Enhancement / FMR*********
Brief title for your desired feature: Enhanced texture controls, including the ability to apply textures in black and/or color (instead of white), and the ability to reverse or invert texture.
How would you like the feature to work? Three possible implementations have been outlined in this forum posting:
http://forums.adobe.com/thread/1042206?tstart=0
The basic scenarios are as follows:
SCENARIO 1: An additional "Invert" option. Checking this option would convert white to black, allowing for the application of dark textures to white or light-colored objects. In "Transparent" mode, this option would invert or reverse the figure-ground relationship of the existing texture. This scenario would allow for 4 options in place of the existing 2.
SCENARIO 2: Replace Transparent checkbox with a dropdown menu (White-Black-Transparent) and a "Reverse" checkbox. The dropdown menu offers 3 mutually exclusive options, while "Reverse" inverts the figure-ground relationship of the texture in each case. This scenario would allow for 6 options in place of the existing 2.
SCENARIO 3: Replace Transparent checkbox with a color chip/palette and a "Reverse" checkbox. The color palette would allow for the application of a texture in any color, while choosing Fill: None would create Transparency. This scenario would allow for the greatest number of options.
Why is this feature important to you? Textures are unique to Fireworks and potentially very useful, but their implementation is incomplete. The use of 'white only' means that textures cannot be applied to a white object. Inverting a texture or applying a texture in color requires advanced workarounds and can lead to bloat. The suggested options would make the feature exponentially more powerful and intuitive.

Thanks, Jim! It is a very blog-like post. (I still haven't gotten around to starting a blog but keep thinking I should.)
I figured the clearer and more thought-out the presentation, the greater the likelihood it might get implemented. Also, I was originally stuck on Scenario 1 as a solution, and writing this helped me see other options.

Feature Request: Please fix text editing

Hi there great Adobe Team!
I am usign your product for rapid web prototyping. Often times ontop of my interface drawing, I use the text tool to write some text, and then put a nice colored background box behind it.
The problem I am facing is this:
It seams you have mapped the control-left and control-right keys to change the spacing of the letters. Unfortunately, this is a common mapping used in windows to jump to the next word!
Your current key mapping assignment makes text editing quite troublesome!!!
Can you please change these key maps in your next update?
Thanks very much
Sincerely yours,
a developer that uses Fireworks and Adobe Cloud everyday!

TokyoFire,
Hi! This is a user-to-user forum. I recommend that you submit your feature request directly to Adobe using their official Feature Request and Bug Report Submission form:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
For future reference, it is possible to change many of the keyboard shortcuts in Fireworks using the Keyboard Shortcuts dialog (under Fireworks > Keyboard Shortcuts). Here, you can choose from several different sets or create your own customized set. Within each set, there are three categories: Menu Commands, Tools, and Miscellaneous.
Unfortunately, none of these categories seems to include the shortcut to which you're referring (for text kerning). To expand upon your suggestion, I'd recommend that Adobe consider adding this missing shortcut to the Miscellaneous category, or create a new category called Text, where users can access and modify this and any other missing, text-oriented keyboard shortcuts.

Thank you for my feature request. Now-

Thanks adobe for making true my feature request in CS4. You added two buttons for "more especific" and "less especific" in the "add new css rule" dialog…
Although, it doesn't go through ALL the posible combinations so I often don't find the class or ID I need and I end up typing it myself.
So a graphic interface for selecting the objects I WANT to match would be cool. Even better if I can select the elements I DON'T WANT to match as well.
A multiple element selection system should be enabled, and a new "select elements to match" button would enable the manual selection.
The more-especific and less-especific buttons are mostly used to find a tag/class combination that matches one or several
I wanted a more refined one, though, in which there are different drop down selects for each option, listing:
e.g. for the following code, and having selected elements #page-2 and #page-8, A NEW DROP DOWN select would display a list of the combinations that would match BOTH elements, ordered not by specificy but by number of matches.
<div id="maindiv">
     <ul id="list_one" class="left_column">
          <li class="linkone"><a id="page-1" >Link One</a></li>
          <li class="linktwo"><a id="page-2" >Link Two</a></li>
          <li class="linkthree"><a id="page-3" >Link Three</a></li>
     </ul>
     <ul id="list_two" class="right_column">
          <li class="linkone"><a id="page-4" >Link One</a></li>
          <li class="linktwo"><a id="page-5" >Link Two</a></li>
          <li class="linkthree"><a id="page-6" >Link Three</a></li>
     </ul>
     <ul id="list_three" class="left_column">
          <li class="linkone"><a id="page-7" >Link One</a></li>
          <li class="linktwo"><a id="page-8" >Link Two</a></li>
          <li class="linkthree"><a id="page-9" >Link Three</a></li>
     </ul>
     <ul id="list_four" class="right_column">
          <li class="linkone"><a id="page-10" >Link One</a></li>
          <li class="linktwo"><a id="page-11" >Link Two</a></li>
          <li class="linkthree"><a id="page-12" >Link Three</a></li>
     </ul>
</div>
So, the drop down option would list all the possible rules to OVERRIDE existing rules that match the chosen elements, sorted by amount of nodes matched.
For this example, the first compound rule you will see in the dropdown will be the one that matches ".left_column .linktwo". (Matches 2 elements)
I know it sounds obvious, something you could do yourself. BUT when you have A LOT of code, someone else created, with no obvious class names, or not even intended to be grown up that much… you really need something that finds what the elements you selected have in common.
After your selection, another selection could allow you to DISCARD elements from the choosing chriteria.
Thanks Adobe!

They spammed the post...lol i mean we were spamming what a joke

RV320 and RV325 Feature Request

Hello Cisco Small Business Community.
We are a Cisco Select Partner and have started using RV320's and RV325's with our customers. As we are implementing these deployments, I have noticed there are a few features I would like to see added to the product. I've listed them below.
Urgently Needed Feature Requests:
1. Allow a subnet mask in the 255.255.0.0 range for LAN VLAN's. Many of our customers use a 10.x.x.x range for subnets and many use a 16 bit subnet mask to give them plenty of room to create both static and dynamic assignments. For example, subnet 10: 10.10.0.0/16 with a range of 10.10.10.1-254 for dhcp dynamic leases, and 10.10.0.1-254 for servers, and 10.10.1.1-254 for printers, and 10.10.2.1-254 for networking gear, etc. None of these networks have more than 254 devices on them, but the extra IP range availability is nice because it allows us to help keep their networks organized.
2. The ability to create service groups for firewall and NAT rule creation. There are often times when we need to group several services together and create firewall and NAT rules for them. This would simplify setup and implementation. An example of this feature on Cisco Small Business Products was on the ISA550.
3. The ability to have the RV320/325 to serve as the NTP server for the network. Most small business customers need NTP server functionality, and the logical place to stick this service for many of these networks is on the firewall.
4. The ability to specify any RFC DHCP option. We have some need to be able to specify several additional DHCP options than the ones hard coded into the firewall dhcp server pages. In addition to the options the DHCP servers on the RV320/325 already includes, the common ones that we often use are "Time Server," "Log Server," and "Time Offset."
6. The ability to specify a domain search list and for DHCP clients.
7. The option to register DHCP clients with the specified DNS server (including the on-box DNS Forwarder).
8. The ability to tweak Firewall Session Settings (like in the RV220w and ISA550) and TCP/UDP Timeouts. If full control is not an option, then may four choices such as: "Conservative" -- keeps TCP/UDP connections alive for the longest period of time, "Normal" -- normal TCP/UDP Timeouts, High Latency -- Keep TCP/UDP connections alive for a longer period of time.
9. Additional Diagnostic/status screen information: -- CPU usage for 1 minute, 5 minutes, and 15 minutes, -- number of Firewall Sessions/States, --Firewall Temperature, -- Real Time and RRD based traffic graphs for 15 minutes, 4 hours, 8 hours, 1 day, and 1 week,
10. The ability to pull Firmware Updates directly from the Cisco support site onto the firewall.
Nice to Have Features:
1. VRRP on both WAN and LAN interfaces.
2. The ability to answer DNS helper requests. What I mean is to be able to set the on-box DHCP server up to serve as the DHCP server for non-connected subnets
3. SSH and Telnet command line access for basic troubleshooting (top, pftop, nbtstat, reboot, etc.)
4. The ability to backup and restore parts of the Config file, e.g. just the VPN setup or just the firewall rules
5. OSPF Dynamic Routing Support
With some of the advanced features, I wouldn't mind needing to buy a perpetual "advanced" license for an extra $50 to $100 (e.g. for VRRP, OSPF, SSH access, etc.).
I hope to hear some responses back from Cisco Product Support on these items.

Hello vreid47362,
I'm quite a bit surprised to see that we have both the same idea: provide our feedbacks to cisco to increase our product usage.
Here's mine list:
Custom services
- I was a bit surprised when I have seen for the first time the embedded services list : there is some that I'm sure that nobody use (HTTP and HTTPS secondary), and some usefull network protocols which are missing : NTP, NNTP, NFS, SAMBA, BONJOUR, SSDP, etc.
It could be interesting to start router with those embedded services.
- An option to select both the TCP and UDP services could be very usefull : for now, when we add a service, we have to specify protocol in the following list : TCP, UDP, IPV6.
If I wants to add a rule for NFS without take care of TCP and UDP, I have to set up :
- two custom services, one for UDP, one for TCP
- two custom rules, one for NFS TCP, one for NFS UDP.
If we have two networks or VLAN, we have to define 4 rules...
- Increase the custom service description length could be helpfull : for now it's a problem if we wants to add more than 11 characters.
- If we add a custom service by error, we are unable to remove the generated field : field say that it expect something. if we do not wants to loose previous fields set, we have to save it with false values, and delete after it. Just boring.
Setting up firewall rules for the first time
- The "View logs" button is located on the bottom of the log tab; if we wants to view logs, we have to scroll : it's very boring when we're setting up our rules : we have to go to the firewall tab, and if there is something wrong, we need to go to log tab and scroll.
If you add a shortcut to the log from the firewall rules tab could be very usefull.
Managing firewall rules on the time
- Be able to add a description of the rules defined could be helpfull : I've set all my rules now, but in few months when I'll come back to the interface, I'm not sure to understand all meaning. A description to explain the rule's object could be usefull.
- If we log something in the firewall logs and if we want to remove the a logging trace type, we have to pass on each rules we think it can log something. It could be interesting to view logging option from the grid: it'll help us to earn time.
- Be able to filter rules by VLAN, protocol, ports or the rule's logging state from the rules grid could be helpfull.
Double Wan management
- Add an autodetect feature for the available bandwith could be very helpfull : accoding with values detected, you can help to configure more easily the router
Double wan protocol binding and multiples VLAN
- When I set up the protocols binding configuration I'm was very boring to have to set up rules for all outgoing protocol rules a interface : for example, wants to set up all outgoing SMTP protocol on the WAN1 interface, we have to select SMTP and add 1.1.1.1 au 223.255.255.254. If we have multiples VLAN, we have to repeat this rule for each VLAN subnet mask…
Set up an option for all outgoing traffic could be very helpfull.
DHCP Subnet masks more than 255.255.255.x
Like vreid47362 said, I'm also interested in this feature: For now, subnet masks defined for the DHCP Vlan are provided from a preconfigured select box. If we wants to choose something other than those provided, we can't. It could be interesting to add own own subnet mask (like for example 255.255.0.0).
Kind regards
David

Feature request, link contact to appointment, including mapping

Feature request for iPhone.
1. Ability to link a contact to an appointment.
I would like to be able to go to the calendar, and have a button that associates a contact with a scheduled appointment.
the goal is to be able to have the iPhone type the contact name into an appointment, and to have the map to their address, as well as their phone number, available from the appointment screen.
I do not like having to type in an appointment with the mechanic, and then when I need a map I have to go into the phone book and scroll to the entry.
I do like very much the new search feature on FW 2.0. I already have that feature on 1.1.4, using the program called Search downloaded from Installer.
But it would be much cleaner user interface if simply touching the appointment text field one could access the contact that is scheduled in that appointment.
for example, say on Friday at 1pm Im supposed to take my car to my mechanic. Go to calendar, touch the text entry field, click a new button that adds the contact name to the appointment field. Then save.
Then implement a button on the text field in the calendar, that when touched links to the contact, including their address info so it can be mapped.
In summary, the feature allows a user to paste a contact name into an appointment, and then use the contact name in the appointment to link back to the phone book, so I can use the mapping feature.
I hope that makes sense.
Jonathan

If you would like to leave feedback for the iphone, this link might help.
http://www.apple.com/feedback/iphone.html

Feature Request(?): Readline for zonecfg

I'm not sure if it's appropriate to make a feature request, but I thought I might throw it out there since thats kind of what Express is all about. Is there any merit in adding readline support to zonecfg for command history recall and editing? I admit to never having written an app that used readline so I don't know how much work it is, but imho interfaces using readline always feel much more polished.
Just a thought. :)
Admittedly with the ability to use "info" at all stages of configuration it's not really neccisary, but again just adds some polish.
benr.

I'm not sure if it's appropriate to make a feature request, but I thought I might throw it out there
since thats kind of what Express is all about. Is there any merit in adding readline support to zonecfg
for command history recall and editing? I admit to never having written an app that used readline so I
don't know how much work it is, but imho interfaces using readline always feel much more polished.Actually, the coding isn't the problem. It turns out that GNU readline is GPL (as opposed to LGPL).
That means that you may not use it without GPLing all software that links with it.
I believe that one of my coworkers is investingating whether we can solve this using another
library which provides readline-like functionality. In the mean time, I have opened bugid
"5005631 Readline for zonecfg" on your behalf. Thanks for the RFE!

Feature Request: Right-Click Zoom (like in Audition)

You can hold down the right mouse button down, select an area, and release to zoom to that region in Audition.
Can we please have this feature in Premiere Pro CC? It would be a huge timesaver, and it won't add any bulk to the interface (in terms of height or width of components).
Imagine zooming into the exact section of the timeline you want with one click & drag of the mouse! It works so well in Audition, I really think it's time to bring it over to Premiere (and After Effects would be cool too, but I'd have to request it there, probably). Navigating the timeline is one of the timesinks of editing. This feature could drastically speed that process up.
Does anyone else want this as much as I do?

Honestly, I feel like feature requests get ignored, unless they have more than one person's support behind them.
Not sure about that. We get Features that no one ever mentioned, discussed or asked for.
Its called 'Feature Creep' and I think there is one from last update being discussed in a Forum near you... right now.
[Text formatting corrected.
Message was edited by: Jim Simon

Feature Request: Support for External Synths/Modules (via MIDI)

Hi,
I just posted a feature request (via the Apple Feature Request form) but also wanted to post here. I use a combination of hardware instruments (sound modules) and software instruments.
*My Setup*
- Keyboard #1: M-Audio Axiom 25 (also includes a USB MIDI interface)
- Keyboard #2: Roland A-33 Controller Keyboard (via my Axiom-25's MIDI In)
- Edirol USB MIDI Interface (sound modules plugged into MIDI Outs)
- Sound Module #1: Roland JV-1080
- Sound Module #2: Yamaha TX802
MainStage currently takes care of all my software instrument needs, however, what is missing is the ability to add external physical MIDI devices as either patches or as channel strips. I would like to use a combination of software and hardware instruments in the same song, and control this via Mainstage.
Example:
- Patch 1 could potentially contain 2 software instruments, each seperately controlled by a physical keyboard (this is currently possible)
- Patch 2 could contain 1 software instrument and 1 external sound module each controlled by a physical keyboard (this is currently impossible)
- Patch 3 could contain 2 external sound modules, mapped to different ports and/or channels, and therefore independantly controlled by my 2 keyboads (this is also currently impossible)
Would I be correct in assuming that this is a fairly common limitation of MainStage?
Message was edited by: olafwagner

I have achieved MIDI out from Mainstage, thank to the information found on this forum..
what I actually do is send Prg Change from every preset I select to control a hardware vocal harmony pedal. this way i don't have to remember which setting i use on every song or even, section of a song.
*Step 1:*
Library>application support>Logic> create a folder named precisely MAINSTAGE CALLBACKS
inside of it, create an applescript with this code
on action(parameter)
set myprogramchange to programchangenumber of parameter
tell application "MidiPipe"
MIDISend toPort "MidiPipe AppleScript Input" withData {192, myprogramchange}
end tell
end action
*step 2*
download MIDIPIPE from http://homepage.mac.com/nicowald/SubtleSoft/
and install it in your apps folder
*step 3*
start midipipe, and define the following modules
MIDI IN-> use applescript input from menu
MIDI OUT-> route to your midi interface desired output
save this to a Midipipe file you can easily access
Now, when I go to a gig I FIRST (this is important) load midipipe and my preset, and just hide it and let it work in the background
Start mainstage, and set the program change of every PATCH to what I want to be sent over MIDI OUT when I enter the preset (-1 if needed or modify the previous applescript).
Ok, this just gives you Prg change... if you want something like CC or others, you can look at some of the example files on midipipe, and write your own applescripts to be used from a control within mainstage (you know, select a screen control, and assign it to an applescript located in library>application suport>logic>Mainstage scripts. you have to tell the applescript to receive incoming data from mainstage and send it (with even some filtering or transforming) to midipipe to go to the outside world.
One last idea: i used a free plug-in called MIDIIO that, although the plugin analysis on mainstage might say does not pass, you can use it anyway, and lets you insert it as if it was a plugin instrument...then you just route your screen controller to a MIDI parameter on that track, and there you go...but in the past it was not as solid as the midipipe solution.
I am still investigating...I am pursuing having my hardware controller knobs to follow screen settings everytime I just change a patch, but lack some info on how to get parameter values when entering the patch ¿anyone knows, blueberry, zuelito...? I promise to share the results!
best

Feature requests for LR4 beta from a wedding photographer

I would love to see some more auto white balance algorithms. There are many other algorithms that do an outstanding job that could be implemented to speed up workflow for busy photographers for when the lightroom autobalance doesn't work. Some of these include: i2e (colour science), perfectly clear, and xe847.
These 3 algorithms also apply an auto-toning feature which, when the Lightroom version doesn't work, these might give excellent results quickly. Photoperfect is a program that implements these 3 technologies into its interface and is excellent for quickly tweaking jpegs and tiffs. I would love to see this same capability married to Lightroom's excellent raw conversion engine and outstanding new highlight and shadow sliders.
A skin-tone white balance would be most welcome. Silkypix has this feature. When there is no neutral coloured object, you can click on a skin-tone and this will often white balance the image correctly.
More profiles would be welcome. To use Silkypix 5 Pro as an example again, it has 6 portrait profiles--these are most useful for achieving the perfect look for your photograph. Some are good for single light sources, while others excel at providing pleasing colour under mixed light sources.
Sliders to fine tune noise reduction based on tone (ie. shadow, midtone, and highlight) would truly make Lightroom's noise reduction the gold standard.

As these requests may not make the final release, and we wouldn't want the request to get lost in beta land, might I suggest adding it as a suggestion on the Feature Request forum http://feedback.photoshop.com/photoshop_family where it can easily be tracked? If you post the link to your request here, others can also vote on your request. You may even find a few of them already requested over there, so you could add your vote.

Feature request: transplanting architectural state into OpenSPARC

Hi All,
This is a follow-up from our conversation at FCRC/ISCA last week.
I have a feature request for the OpenSPARC RTL, and potentially the FPGA model, which would help researchers experiment with real workloads on OpenSPARC:
I would like to see a process for transplanting checkpointed architectural state of a booted and running T1000/T2000 system (arch. registers, MMU, and memory values) into the OpenSPARC RTL model.
Ideally, this would happen over a socket so the transplant doesn't depend on a particular full-system simulator (e.g., we use Simics/Niagara at CMU, but I expect that many people would like to interface with SAM).
I attempted this on my own a few months ago, with limited success. I wrote Verilog PLI/socket code that 1. slams many of the architectural registers and MMU and 2. replaces the interface in dimm.v with socket calls to a remote Simics instance (non-trivial code, has to reconstruct the phys addr and ECC bits to work properly). Much of this actually worked. I was not, however, able to redirect the core's PC to a new location and properly initiate an i-cache miss.
Perhaps someone with a better understanding of the fetch/thread select stages knows the right combination of registers, valid bits, fetch/miss queue entries could make this work...
Brainstorm:
An alternative approach (which avoids many, but not all, dependencies on the specific RTL revision and is arguably superior to my first approach) might be to write a hyper-privileged "context switch" ASM routine to load architectural state and get the processor boostrapped at a new PC.
This program could be like the usual validation test program, except it loads registers/MMU state from the hijacked DRAM model. Once these values have been loaded into the core, the caches can be invalidated to remove these temporary values (trivial with PLI code), and the full-system memory image can be enabled in the DRAM model.
I can make my code available, if desired.
Thanks!
Jared

Hi Jared,
Thanks for following up on this.
There could be wider interesting in this work and we feel that it makes a very good OpenSPARC based community project that can be hosted on opensparc.net.
If you are interested in contributing the code and taking it forward then we can get it hosted and have right people from Sun help you in making it a successsful one.
I will send you separate email on this topic.
Thank You.
Hi All,
This is a follow-up from our conversation at
FCRC/ISCA last week.
I have a feature request for the OpenSPARC RTL, and
potentially the FPGA model, which would help
researchers experiment with real workloads on
OpenSPARC:
I would like to see a process for transplanting
checkpointed architectural state of a booted and
running T1000/T2000 system (arch. registers, MMU, and
memory values) into the OpenSPARC RTL model.
Ideally, this would happen over a socket so the
transplant doesn't depend on a particular full-system
simulator (e.g., we use Simics/Niagara at CMU, but I
expect that many people would like to interface with
SAM).
I attempted this on my own a few months ago, with
limited success. I wrote Verilog PLI/socket code
that 1. slams many of the architectural registers
and MMU and 2. replaces the interface in dimm.v with
socket calls to a remote Simics instance (non-trivial
code, has to reconstruct the phys addr and ECC bits
to work properly). Much of this actually worked. I
was not, however, able to redirect the core's PC to a
new location and properly initiate an i-cache miss.
Perhaps someone with a better understanding of the
fetch/thread select stages knows the right
combination of registers, valid bits, fetch/miss
queue entries could make this work...
Brainstorm:
An alternative approach (which avoids many, but not
all, dependencies on the specific RTL revision and is
arguably superior to my first approach) might be to
write a hyper-privileged "context switch" ASM routine
to load architectural state and get the processor
boostrapped at a new PC.
This program could be like the usual validation test
program, except it loads registers/MMU state from the
hijacked DRAM model. Once these values have been
loaded into the core, the caches can be invalidated
to remove these temporary values (trivial with PLI
code), and the full-system memory image can be
enabled in the DRAM model.
I can make my code available, if desired.
Thanks!
Jared

Feature Requests for BlackBerry10 OS

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
This thread has been closed and is continued in this new thread here:
Feature Requests beyond BlackBerry OS10.3.1
Please click on that link.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Let's use this thread to list BlackBerry10 OS feature requests. There's nothing official to this thread, but one never knows who might view it and get an idea or two to move foward.
Please let's keep it to feature requests with simple short statements and comments, in this manner:
1. Ability to lock the volume keys (since they are so easliy pressed when retrieving from holster)
2. Personal distribution groups Address Book
4. Add BBM Group icon to home screen
**This thread is not for bug reports (i.e., the calendar glitches when I set the date) or for debate or discussion of the worthiness of a feature request.
So, what would YOU add to BB10?
What do YOU need to make the OS platform work better for you?
Here are the collected feature requests as of 04 April 2013. Thanks for Ride_The_Sky for helping collect these from this thread.
There are listed in no order, just as collected.
Ability to lock the volume keys (since they are so easily pressed when retrieving from holster)
Personal distribution groups Address Book
Add BBM Group icon to home screen
Way to add line carriage to BBM messages
Why doesn't the most used name come up first? <- In latest OS, there is another line with most common contacts, but when typing it won't provide most commonly emailed contacts.
Bring back the option "Send As" or include this option in "Share"
Enable word wrap when zooming in to emails and messages.
Import Distribution lists from Outlook on your desktop to your Z10?
*The option* to always show the hub main screen when opening the hub, so when peeking it always shows the hub even if you leave it in another screen.
Offer Balance without BES to have two workspaces in device.
Delete on Server/Device/Both
Delete on Server but Keep on Device (This is going to be tough since EAS does not work like POP, using POP you can do this by deleting on server after sync)
Auto power on/off or Auto Do Not Disturb / Scheduled Airplane Mode / Scheduled Silence Mode / Scheduled Custom Profile
Default Currency Option
More options to lower data usage in e-mail (Headers Only / Roaming Profiles)
Snooze a notification/reminder for more than 5 minutes.
Customized Notifications
Disable certain accounts to stop receiving email or notifications from them temporarily to avoid data usage.
Way to delete recent pictures, videos.
Office Hub customization, sorting, editing, etc., on the fly.
Select which contact groups to sync, and ability delete all contacts.
Larger text select tabs
Add more options to dropbar.
Improve browser functionality and display, add customization and management of Bookmarks.
Calendar in Landscape mode
Option to Disable shutter sounds in camera.
Auto BCC option
Multiple appointments in lock screen, not only next one.
Increase email check frequency, custom minutes (possibly battery concern, most accounts use push nowadays)
Ability to hide "texting" numbers such as Work, home, etc that aren't able to receive texts
Ability to have multiple mobile numbers, such as mobile1, mobile2, for people with more than one cellphone
Ability to have multiple work numbers, home numbers, etc
Ability to have option for actually creating "custom" names for phone numbers, emails, VOIP,
Ability to have multiple WORK emails fields for same contact ...
Ability for a custom note field for each contact, for misc information such as store hours, reference numbers, business account numbers,
Ability for filter or unselect specific Twitter, LinkedIn, Facebook contacts so they all don't appear
Ability to "share" contact info with someone else ... like a vcard or the like
Ability to have custom Individual text and ringtones for each contact set within contacts app
Vibrate option for Alarm
Mail Filters for Priority mails.
Option to block ringtones from music app (i don't see ringtones in my music app, I guess poster refers to custom mp3 files)
Swipe down to close, up to minimize (but some apps have menus associated with swipe up gesture)
Swipe half way up the screen to minimize an application to an active tile.
Swipe it all the way up the screen to close the application.
Playbook app switching gestures (swipe sideways, I guess this won't work since there are other gestures associated with side-swiping)
Lock screen with gesture (or maybe they should just add a button on home screen, somewhere on top or bottom)
Airplane mode on status bar options.
Option to customize status bar with select Settings/Options.
Colors for Hub!
Face recognition for camera, being able to associate contacts with faces or pull info from Facebook, etc.
Weather info on Lock Screen (if I may add, and constant info on top status bar, simple temp info should be enough)
We need groups back in contacts please.
Import text messages in various formats from various systems.
Sorting and Ordering of the way contacts are displayed depending on account.
While editing an entry in calendar, notification about a recent call may cause loss of data in that entry.
Location for Calendar entries and be able to see it on the map with a tap.
Being able to see multiple pictures from an email by swiping left and right to see next/previous without having to reopen (I must say the same thing is needed for App World, why can't we just scroll through screenshots??)
Multiple flags or ability to set a flag date, associate with a reminder.
Move people from TO to CC or BCC easily (If I may add, also ability to backspace to delete a contact without having to tap the X in blue box).
Option to add favorites to Hub for easy to reach contact management (I think it is same as going to contacts and choosing Favs)
Being able to answer and make calls when the phone is locked.
Add more colors to LED notification (I think they are there now, orange, green, red so far, did not see blue, I don't think blue is needed in my opinion)
Change the way to add date and time for appointment, rollbar is too slow and too sensitive.
Dismiss and Snooze buttons for Alarm to be different colors, larger, easier to notice.
Make it easier to order world clocks, instead of the order they are added.
Alarms based on days/schedule.
Easier way to get to the bottom of e-mails (I think it scrolls pretty fast, I think poster wants "B" shortcut)
Easer way to get to the bottom of web pages (same as above, space or B shortcut?)
Add option to ask if you really want to dial, instead of just dialing right away every time a phone number is clicked/tapped on.
Ability to resize image before attaching to an e-mail.
More than 30 days email sync on device, please!
Make BB boot up slower, so we can actually get to do something else while waiting for it to start!
SSH client would be nice.
Another keyboard like Swipe (honestly, I have never typed faster in my life on any other on screen keyboard, Z10 keyboard is awesome!)
Volume lock/unlock button on demand.
Auto Run app on device boot up.
Lock or Pin apps.
Ability to run background apps (Google Talk is running in the background, or it is tricking me, I don't know but I am getting messages from it when it is shut down on BB10, I hope they do Skype the same way)
Ability to have multiple documents of same type open at the same time (tabbed docs2go)
Calendar sharing of BB10 users in the area/company/group.
PIN Messaging to return.
Preview e-mails, calendar and other information on lock screen (privacy?)
Way to clear anything in any "Recent" menu, videos, pictures, etc..
Ability to hide apps, docs, pics, videos, folders, etc..
BBM Group Picture notification.
Support WhatsApp more.
Another tap for important numbers (Favorites work for this, and on top of speed dial)
From Call Menu when going into contacts, it should be ready to search with keyboard out.
Option to customize volume key to act as page up/down, etc depending on app running.
Red star in app world (means you need to run Updates, just refresh and check by swiping down from top)
Better headphones with the phone (hey, we didn't even get any!)
Better night shots in camera (hardware or software improvement?)
Ability to choose which address book to sync with bluetooth car.
When app is opened from a folder three or four pages into apps list, we hope the screen can go back to that spot when the app is closed (sadly it uses active frames at the moment)
Change acceptance of auto corrected key, instead of space key, make it something else (actually, you can just backspace to un-autocorrect it back to what you typed).
Ability to load certificates (X 509 S/MIME and/or PGP/MIME) from a computer
Ability to sign and or encrypt emails (POP3) before sending (As in MS Office Outlook)
Ability to receive and recognize signed and or encrypted emails (POP3) (As in MS Office Outlook)
Add a password/certificate manager that doesn't require manual copy/paste
Ability to encrypt the memories Device and Media of the Q10 like it is done for the BB9900
Ability to encrypt selected folders (preferably by Private Key)
Ability to create Self-Decrypting Archive like in PGP
Ability to delete email-messages by group as an alternate option to one by one
Opening Video-chat to non-BBM users (Skype for instance)
For above encryption request, SecuSmart was suggested...
Renaming the file without extension can break the file or hide it from pictures list.
Wallpaper scrolling sideways.
Standalone e-mail app (not sure how different it is than choosing emails-only for hub)
Different colors or small tabs in different colors for different accounts in Hub.
Share webpages with smart tag (I think you can just create it by pasting the URL into create QR)
Application management (being able to see which app takes up how much space, etc..) CPU/Memory/Battery Usage/Data Usage/Storage Usage in more details
Custom vibration options.
Move Send button in BBM to avoid accidental submission of message
Forward As… SMS, MMS, EMAIL from one to another.
Send SMS to new numbers (I think you can still do this from call log)
Single key press to change profiles.
Insert a picture into an e-mail. (I think he means into the body of email)
Turning off links of contacts (I think poster did not have multiple accounts, actually BB10 goes ahead and adds all new contacts into all address books in all accounts without user permission.. Create a contact in Hotmail? Gets copied to Gmail.. and then linked, terrible implementation in my opinion)
Presets for browser bookmarks, faster access to bookmarks. (My suggestion was to create a home screen, select 12 icons 3x4 or 16 icons 4x4 as home screen/start page)
Being able to allow flash based on website/url/server.
Ability to adjust different sounds/volumes for different BBM users/groups
Better Voice Dial and Voice Commands (shorter and easier operation)
Ability close one or all web pages/tabs, add "Close All" button.
Call Recording
Faster way to delete e-mails, such as file icons next to e-mails, or Swipe to Delete! Swipe to File!?
Customize email signatures with formatting.
Phone to stay on screen (dial pad always available in panes)
More Options for Clock.
In Playbook we can have a single character password, why not on BB10? "too short" well it is my decision, isn't it?
There is no way to go next/previous while reading an e-mail. Please add these functions.
Add to the e-mail client, Next Unread / Previous Unread.
E-mail or Hub should have more buttons at the bottom in landscape mode. Why keep only three (or four in e-mail view) buttons when you have the real estate. It would be extremely handy if you allowed users to edit which buttons should go at the bottom. Next Previous is really needed while reading an e-mail. For example I would love to add "File" button at the bottom as a shortcut instead of forward, I rarely forward, but I file all the time. Maybe allow users to have two row of keys, add next/previous/unread. Or it could be done with a gesture. How about swiping the account name (top blue bar while reading e-mail) left and right?
When you create a new contact in BlackBerry, it gets synced to all accounts on the Hub. There is no way to limit the new contact to a specific account.
Sometimes when you file an e-mail to a folder, it stops and waits few seconds with no message. Even when it files immediately, there is a confirmation message that takes time to appear and disappear, and the folder list does not disappear automatically.
Messages filed automatically by server using server side filter rules are still showing up on Blackberry hub/inbox. In older BB versions the filtered messages did not show up in the list, filed messages still did.
When you filter your e-mails using Filter / Unread function, new unread e-mails do not show up until you close the filter and re-open. It won't just keep refreshing your screen with unread e-mails. Can BB add a button to the hub "Unread Hub" so when hub shows 8 or 2, you can actually see unread items easily without having to through so many taps.
Native BB QR scanner (Smart Tags) does not work with barcodes (it only scans with no way to use the information). There is Open In function but it doesn't work properly.
We need to add more customs search providers, and be able to add custom search strings/wildcards. For example currently there is Google, Bing, Yahoo, Foursquare, etc..
I hope BB introduces the ability include more standard & custom searches, IMDB, PriceGrabber, Ebay, Youtube, XYZ Forums, ABC Newspaper, 123 Database, Etc.. Most sites nowadays provide search string in their URL Search=?* etc...
None of the Battery apps can access system settings to add a battery icon to the top. I wish battery percentage was there.
There is no way to check carrier/mobile signal strength.
Blackberry, please add the date and carrier / SSID info to the top. Sometimes we just want to glance at the top to see the date without having to swipe.
Please bring back keyboard shortcuts. Since we can easily swipe up to bring the keyboard, just add keyboard shortcuts in e-mail, phone (true speed dialing, dialing by word?), and browser, etc.. if possible. I could always call 1800SOMETHING# now I have to look up the number or use dial pad.. Please bring it back.
Camera zoom function needs to be fixed, also please include option of fixed focus by tapping on the screen to focus. The auto focus in video is focusing in and out to various objects all the time. Stabilization feature also causes tearing/ripples, I guess it is good if you are stationary. Or use Volume Keys to Zoom.
Please allow more than 12 icons in an icon group/folder, I hated Apple for limiting apps per folder, please fix it.
Auto ON/OFF feature is not there anymore. BB should consider Auto DND (DoNotDisturb) or Auto Silent/Airplane modes instead.
Please find a way to stop the music app from automatically starting up every time it connects to bluetooth like car audio. This is very annoying.
No Panaroma mode in Camera app, why not? It is very easy to incorporate. This could be a nice addition to next release, and easy.
The text selection grips needs to be a little bigger, sometimes I cannot see where I am moving them, they work better in Playbook, nice big tabs.
Call Functions, before answering a phone add sideways gesture functions, like swiping right will forward the call, swiping left will answer with a test message, etc..
Or there should be a way to reject the call without sending it to voice mail, phones had this function a decade ago, I don't know what happened to it.
We used to be able to see the "History" without having to save the contact. Now I don't see any way to "View History" of a certain phone number, it just keeps adding
them as individual entries to the log. Now I can't see when was the last time they called me, how many times we spoke which day, etc... I loved this feature in BB5.
Where is BB Traffic? Where is BB Weather, without having to run an active frame? It will eventually disappear if you run too many apps. I liked a little Icon that shows me what the temp is, instead of running a whole app.
There is no Skype. This day and age with all other platforms having it, please either get skype (Microsoft) to cooperate, or open up BBM to other platforms. If necessary, pay Skype to develop the app, then charge BB users for the app. Most will gladly pay.
Can we tap and hold on an active frame to pin it, or can we pin two favorite apps between Call and Search & Search and Camera buttons in the bottom bar? How about Close All running Active Frames app to quickly free up ram?
I hope next generation devices have two speakers or speaker that is facing forward. When playing games or watching videos in landscape mode, I find my palm muting the speaker. I have to hold it gently with fingers to have a gap in between, something I don't want to do when I am on the subway or bus.
Blackberry Maps should have a Zoom In/Zoom Out buttons, sometimes using it with one hand, it is impossible to zoom in and out. (Zoom in is OK but we can't zoom back out)
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Solved!
Go to Solution.

- ability to choose deletion of an email on handset only
- desktop software working with all older BB's allowing drag and drop type of transferring data, contacts etc. (BB link doesn't recognize my old Storm)
- auto power on/off
- contacts syncing with yahoo & Outlook (almost two weeks trying to work around it and no luck)

FEATURE REQUEST: make swipe-down Notifications bar disable-able

I use the iPad as a drawing tablet every day, using Brushes, ArtRage, and other drawing apps.
It's wonderful and I am delighted to be able to do this . . . EXCEPT WHEN I DRAW A STROKE DOWN FROM THE TOP OF THE SCREEN.
The introduction of the new pull-down Notifications drawer has led to loud cursing and a strong desire to break things, for me. When one is drawing, one is not in a state in which one wishes to glance at what the next day's schedule is at. Furthermore, the active area of the pull-down also 'catches' the drawing input, so the stroke which is misdirected into the Notification dialog is lost work, and subsequent rapid stokes, up to the threshold of my reaction time, also do not register.
I must then dismiss the godforsaken irritating dialog in order to continue drawing. It is the most incredibly irritating interaction I have ever experienced on an Apple product.
Please permit the dialog to be disabled either user-globally or on a per-app basis as a user-configurable setting.

even with all notifications turned off the drawer remains active. there's no way to disable it.
while this may be a user to user forum apple people do contribute. I did file this as a feature request but wanted it to be visible and searchable.

Interface Feature Request

Similar Messages

Maybe you are looking for