Interface Issue in PI7.1 - Unable to find receiver

Hi,
I have a strange issue cropping up. An interface has gone for production. Now due to some support packs being installed on the target side, they are testing few interfaces in Dev environment again. But this time it is not working. This interface was tested long back.
Issue:
PI receives message from SAP but is unable to send the message to target
Error Shown:
<SAP:Stack>No receiver could be determined</SAP:Stack>
-->
<Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="1" type="T">No Relation found - accept given Receivers. </Trace>
</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing! </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace>

Observation and Steps Taken for checking:
No conditions are there for Receiver Determination. Its a simple proxy to http scenario.
I performed the unit testing. Did the configuration testing as well as have sent a same payload to the target system using RWB.
All are successful and message also reached target successfully.
But when SAP sends it gets stuck. i have the same issue with 2 interfaces, both having the same problem.
Please Guide me.
Thanks,
Kevin

Hi Kevin,
Then the old method which we use to follow here.. Do a dummy change (like putting some value in description) in Receiver determination and activate it.
See if this solves the problem.
BTW you were saying that a successful message comes when you test this interface from RWB or test configuration; but when you test from SAP it is throwing this error!!!
try comparing all fields in SOAP header field. Also try comparing the "trace" in both cases.
Regards
Suraj

Similar Messages

JDeveloper Issue-Urgent.(Unable to find component with absolute reference)

Hello ppl,
I been struck up with some JDev issue ,I copied the JDev and set my JDEV_USER_HOME and i create a simple page and try to run it...I get the following error
Exception:
oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = /oracle/apps/eam/workorder/webui/EAM_EW_START_PAGE, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
I been trying around this for the past 2 days....
Appreciate any help!!
Cheers.
1.I tried creating a new page it didnt work...
2.I tried copying an existing page the error message points to it...but no use..
3.i could not find the env.txt in my jdevhome (can this be the problem?)
Cheers.

Rcana,
Sorry, but the question is really specific to OA Framework. The JDev version you are using is quite "special," in that it's only available on Metalink for Apps customers. Sorry, but OA Framework forum is really the right place.
Did you follow the instructions for setting it up (came in the zip file you downloaded from Metalink)?
Regards,
john

ERR-1002 Unable to find item ID

Hi. can any one help me to resolve this issue
ERR-1002 Unable to find item ID for item "P801_LISTP801_NG_PO_NUMBER" in application "1000300".
Unexpected error, unable to find item name at application or page level.

Hi,
That does not look like an Oracle error message (They usually start with ORA-)
http://docs.oracle.com/cd/B19306_01/server.102/b14219/toc.htm
Perhaps someone coded that inside some application?
Anyway, if you believe it to be an Oracle exception should write just a little about the situation causing this, along with a stack trace.
Regards
Peter

Unable to find the Message Interface Receiver Determination

Hi Everyone,
I am unable to find the Message Interface Receiver Determination in the SAP BASIS 7.0 --> http://sap.com/xi/XI/System. in IR.
I am using P.I 7.0 SP 15
Could anyone let me know what could be the problem.
Regards,
Varun

Hi Sridhar,
I cant find the Message Interface Receiver Determination in IR under the standard SWCV SAP BASIS 7.0 and under the namespace http://sap.com/xi/XI/System. in IR.This Message Interface will be useful while configuring in enhanced Receiver Determination.
http://help.sap.com/saphelp_nw2004s/helpdata/EN/84/e8763c997fda50e10000000a11405a/frameset.htm
Regards,
Varun

"Unable to find inbound interface"

Hi all,
I have an error in sxmb_moni. Everytime I click on the red flag, I get the error, "Unable to find inbound interface". I already checked namespaces and SCV in IR. I also checked Interface Determination in ID. They are all correct. I have already tested my config in QAS, and everything went well. I'm having problems right now in PRD. Can somebody help me? thanks.
When I run Test Tool Config, I get the following error:
Interface Determination
Thanks.
Regards,
IX

Error when determining the inbound interface: Problem evaluating a condition: Exception
CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include:
CL_SWF_RLS_CONDITION==========CM00Q, line: 160).
Payload problem check these solved threads:
Error
Error in Receiver Determination
regards,
Abhishek

PI7.11 - Still going thru Integration Engine and Can't find Receiver

Scenario:
ECC<-----SoapAdapter(Synch)> PI7.11 <JDBCAdapter(Synch)--
>OracleDatabase
Use of Local Processing required in this project.
I've successfully completed Design work and then completed Integrated Configuration (all those tabs, Inbound processing, Receiver, Receiver Interfaces, Outbound Processing look correct)
Then I did the ABAP backend communication on the ECC side
(SM59-RFC Destination to point to AAE,
then SXMIF - defined Sender Interface,
then sxmb_adm - IE Engine Config.-->Specific Config where I added IS_URL.
Ran my test from ECC. It is still going thru IE engine and cannot find receiver.
What am I doing wrong? Please advise...
Edited by: Maurice Gonsalves on Dec 8, 2010 2:53 AM

I did.
In SXMSIF, I only created a sender ID (named it, RECONREPORT) where I
Left Agency and Schema blank
Party and Service: put *
Request - Put my Sender Interface and Sender namespace
Then in SXMB_ADM-->Specific config.
I created a new entry of
Catogery: Runtime
Parameters: IS_URL
Subparameter: I copied the text of Sender ID from SXMSIF and pasted it.
Current value: dest://AAE_PEH
on a different note, in SM59 I have
RFC Destination: AAE_PEH
Target host: put my java host
Service no: put my java port here.

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files?

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?

Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.

I am having issues with my iphone6 bluetooth connection in my car. When going to settings under bluetooth, it is unable to find any devices. I did not have this issue until I downloaded IOS 8.0.2. Do you know if there has been any resolution yet?

I am having issues with my iphone6 Bluetooth connection in my 2013 Mercedes C Class. When going to settings under Bluetooth, it is unable to find any devices. I did not have this issue until I downloaded IOS 8.0.2. Do you know if there has been any resolution from Apple yet?

Hi susan from WSL,
Welcome to the Apple Support Communities!
I understand that when your Bluetooth accessories, such as your car connection, do not work as expected it can be very frustrating. In this situation, I would recommend working through the troubleshooting steps provided in the attached article.
If you can’t use a Bluetooth accessory or car kit
Cheers,
Joe

IB Routing issue. Unable to find routing to the corresponding incoming msg

Hi All,
We are facing a Routing issue. The flow of message across the DB is given below.
1) Message will be triggered from 3rd party application to PeopleSoft portal with Service Operation A
2) From portal one more service operation B will be invoked to communicate with CRM
Both the service operations are synchronous. I have tested the Service operation in CRM and I am able to get the results. But in Portal if I test, I am getting the error like
+"Unable to find routing corresponding to the incoming request message"+
I have checked the routing alias name between Portal and CRM data bases and Its same.
could you please give us a clue to debug this further?
Thanks,
Hari.A

You should check which permission list the service operation is attached to, and check if the user has been granted to, Something like the following from the backend :
SELECT   distinct c.roleuser
FROM     psclassdefn a, psroleclass b, psroleuser c
WHERE    a.classid = b.classid
AND      b.rolename = c.rolename
AND      a.classid = '<permission_list>' If nothing is returned for your user, then you could created a new role and give it to the user.
Also, since you are on Peopletools 8.52, all this configuration settings can be done through Integration Network WorkCenter. I wrote articles about that (and you can find something about permission list for a given service operation as well) :
http://gasparotto.blogspot.nl/2012/11/peopletools-852-integration-network.html
Nicolas.

Yet another "unable to find root device" problem (pacman issue) SOLVED

During this night I've been trying to solve a problem that let me without access to my ArchLinux partition.
Booting the kernel.
:: Starting udevd...
done.
:: Running Hook [udev]
:: Triggering uevents...done.
Waiting 10 seconds for device /dev/by-uuid ...
ERROR: Unable to find root device '/dev/by-uuid'.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[rootfs /]#
The thing is that I've read about chrooting, I did chroot following the steps described on the Wiki https://wiki.archlinux.org/index.php/Change_Root but I have a problem with pacman and it's that I can't use pacman on chroot, it says: command not found. I must've done something wrong but I have no clue.
My disk is sda1 and I don't use a special partition for /boot or /home.
Thank you in advance.
Last edited by ffuentes (2012-08-17 04:33:38)

I've solved the mystery.
Well, I realised that I had another serious issue with filesystem (that was mentioned on the Archlinux's news https://www.archlinux.org/news/filesyst … equired-1/ and https://www.archlinux.org/news/the-lib- … a-symlink/ ) so I had to figure out which packages were using /lib to remove them. Also I had to disable pacman's signature checking system because as I said before it didn't seem to work.
After removing every package that happened to use /lib at that time I eventually could perform the command "pacman -Syu" and later on "mkinitcpio -p linux" worked out.
Thanks DSpider.

Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. Is anyone else having any similar issues?

Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?

Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you. TanishaS1_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Unable to find an inbound interface

Hi masters,
I have an error in sxmb_moni. I get 'Unable to find an inbound interface' everytime i click on the red flag. How can I remedy this problem. thanks!!!

>
Ignatius - Xavier Bazar wrote:
> Hi masters,
> I have an error in sxmb_moni. I get 'Unable to find an inbound interface' everytime i click on the red flag. How can I remedy this problem. thanks!!!
Hi,
1. Check the Inbound message payload in sxmb_moni.
2. If your payload is invalid, it wont be displayed in moni. So check the msg content in RWB- Message Monitoring.
3. Let me know if you are using condition in the Reciever Determination.
Regards,
Chandra

Nokia N8 - Unable to find any folder named "Receiv...

I have been an ardent fan of this cell phone.
But slowly this is eroding my romance for this cellphone.....
Well I transferred 2 videos via bluetooth to this and I was unable to move those files from the inbox to E drive ..... No such options are available - I searched for "received files/folder" in file management but was unable to find any folder named "Received files" in either C or E drives.
Not sure if I am missing out something here. But seems like this is very poor programming from an OS perspective that such basic options are not provided.
Solved!
Go to Solution.

Well under E: the folders that were present are
cities, games, images, installed files, music store files, nokia_ovi_suite_instalxxxxx, other, playlists, sound files, video clips, 355944040xxxxxxx.ndif, autorun.inf, install nokia ovi suite xxxxxx.exe, nfsshift_1_0_5XXXXX.sis, qf
I am from India and brought this phone from a noia vendor. Not sure if they provide some thing else when you buy through a Telco service provider.
Anyway, after long desperation, I thought I will give a try on experimenting a bit on this. So I created a folder named "Received Files" under E: drive and Lo and behold.......a similar folder automatically got created under C:
And now when I transfer files via Bluetooth I receive them in E:/Received Files and even if I delete the file from Inbox it is still there in E:/Received Files.

Issue usr/lib/pa20_64/dld.sl: Unable to find library 'libwtc9.sl'

Hi,
I have an issue installing SAP on HP UNIX 11.11
usr/lib/pa20_64/dld.sl: Unable to find library 'libwtc9.sl' , can some one help me.

Hi Ching,
Check for the onacle client?
Which Oracle version you are using and which SAP you are trying to install?
Try to give some more details.
Best Wishes.
Kumar

Interface Issue in PI7.1 - Unable to find receiver

Similar Messages

Maybe you are looking for