Interface need  between customer Payroll system and Oracle HRMS

Hi,
we are implementing oracle HRMS to our client.but for the employees payroll they are using there own system .they need the interface between their system and the Oracle HRMS for the employees data. How can we provide this ..
Shall we give some(Required) oracle tablesI(their needed datas available here) access to them . if yes how do we give this. pl suggest us ..
Regards,
Kumar

if yes how do we give this. pl suggest us So much depends upon the architecture of your systems it is difficult to know where to begin. Is this read-only or read-write access? Is it a distributed system? Are the databases on remote sites? What are the SLAs you have to work to?
In general it is a bad idea to grant other systems raw access to your tables. At the very least build at interface of views or materialized views. A better approach is to construct an API of PL/SQL packages to wrap access to the tables and expose them instead.
Cheers, APC
Blog : http://radiofreetooting.blogspot.com/

Similar Messages

  • How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

    Hi,
    I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI".  While I'm waiting for  more authorisation to r/3 to carry it out and test this functionality.
    I'd like to ask a question to anyone who has implemented this type solution.  On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query.  I suspect when we run a query I would run it for only a period(using variable) to reconcile.
    My question is this.  Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
    Regards

    DEar Mark,
    There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
    On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
    hope this helps.
    Kindly assign the points if it works.
    Revert back if u need futher help/information.

  • Conectivity between existent SAP Systems and migrated system to MSCS Cluste

    Hi
    I have an existing SAP NW PI 7.0 (Abap + Java on Windows 2003 - SQLServer 2005) and plan to migrate to a cluster with new hardware (MSCS).
    I have to prepare for the installation by creating a homogeneous copy of the database but I'm a little bit confused.
    -Can I use backup/restore method or only can use import/export with R3load tools? The target system is windows and sql server same versions.
    -If I can use backup/restore... what is the rigth sequence to the installation? Can I use sapinst with mixed high availability options and System copy options?
    -I need to use in the target system the same hostname and IP address of the actual system, so in the Follow-Up Activities we do not change the configuration between the actual system (SAP NW PI) and other existent systems in the landscape... but I do not know what is the location in the cluster to this hostname and IP:
    *The central instance will be in the local disks in the node 1. Is the node 1 the rigth option to use the hostname and IP of the actual system?
    *The SAP Cluster group has a virtual hostname and IP, it has message and enqueu services. Is the sap cluster group he rigth option to use the hostname and IP of the actual system?
    How is the communication between the other systemas and the new clustered system?
    Thanks for your help

    Can I use backup/restore method or only can use import/export with R3load tools? The target system is windows and sql server same versions.
    You should follow the SAP guidlines in performing a homogeneous system copy.
    I need to use in the target system the same hostname and IP address of the actual system, so in the Follow-Up Activities we do not change the configuration between the actual system (SAP NW PI) and other existent systems in the landscape... but I do not know what is the location in the cluster to this hostname and IP
    This is not possible.  If you follow the SAP instructions for installing NW 7.0 in MSCS you will create two cluster groups: DBGroup and SAPGroup.  You will therefore have two virtual IP addresses, one for SAP cluster group and one for DB cluster group.  If you retain the current IP address/hostname for the virtual SAPGroup, you will need to follow the SAP guidelines for performing a SAP system copy to find where to change the database hostname/IP addresses to point to your new DBGroup.
    The central instance will be in the local disks in the node 1. Is the node 1 the rigth option to use the hostname and IP of the actual system?
    If you are meaning the ASCS then this should be installed on the disks that are part of the SAPGroup in the cluster.
    If you mean the dialog instance (or the Central Instance of a Java stack) then this can be on a local disk for node 1, and not in the cluster.
    The SAP Cluster group has a virtual hostname and IP, it has message and enqueu services. Is the sap cluster group he rigth option to use the hostname and IP of the actual system
    Yes, this will be the message server host for ASCS.

  • I need to replace my system and my laptop is macpro OS x 10.6.7 15 in

    i need to replace my system and my laptop is mac pro OS x 10.6.7 15 inches and i lost my install dics how i can get a new one

    Mac Pro is a desktop.
    mariateresa wrote:
    i need to replace my system and my laptop is mac pro OS x 10.6.7 15 inches and i lost my install dics how i can get a new one
    MacBook Pro is a notebook.  It is not a laptop
    You can get replacement System Discs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those -
    http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html

  • Difference between Customer Generated Extractors and Generic Extractors

    Hi all,
            Can anyone please tell me the difference between Customer Generated Extractors and Generic Extractors.  I know that for all modules Generic extraction is possible by creating a datasource(RSO2) on top of a table, View or SAP Query in SE11.  What are customer generated extractors like LIS, CO/PA and FI/SL. 
    What kind of extraction is used for FI/AR and FI/AP.  To my understanding we have BW Content Extractors.  Can anyone explain the extraction method and delta extraction for AR and AP.
    Thanks,
    Sabrina.

    Hi,
    Customer generated extractors are running on top of statistics data collection process in R/3. They extract data from statistical tables already available in R/3 and also use the mechanism already provided in R/3 to capture the delta.
    For example, PO data goes to statistical table S012 (it is an LIS table) and you can build a generated extractor on top of it. The difference between such extractor and a generic one is the fact that these extractors (eg LIS) use the same mechanism of capturing delta that the statistics table was doing (for example data that goes into S012 is also captured by these generated extractors). Some system tables and structures are generated automatically to support this functionality, you do not have to develop anything for this.
    Generic extractors on the other hand simply let you pull data from table/view/query etc. You have to develop code/functionality to support delta capturing for such extractors. If you built a generic extractor on top of S012 (it is a statistical table - LIS), you can pull its data to BW, but you do not have the delta capturing functionality in such case, you will have to code it yourself.
    As a thumb rule, you go with the standard/generated extractors, and use generic extractors only if it is necessary to be so.
    FI/AR and FI/AP extractors are part of business content (I think) and support delta functionality. To get detailed info on these, you can also look at help documentation -
    http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
    cheers,

  • Connection between portal (KM system) and external server.

    Hello All,
    I need to establish connection between portal (KM system) and external server. At external server, IIS and WebDAV are configured.
    So for this reason, I have created an HTTP system and a webDAV repository manager at portal, but not able to connect to the external system.
    I have created a webDAV template, but not able see it under KM systems to create a webDAV system, I have even restarted the portal, still no use
    Please suggest, any prerequisites need to be done?
    Thanks
    sk

    Hello Supraja.
    Yes, ofcourse i already followed the doc.... In the 20th page of the doc, it is said the portal needs to be started, for the WebDAV template to be seen. to go head and creat a WebDAV system under KM systems.
    But even after restarting the portal, I cant find the already created WebDAV template. Any guess to reslove it...
    A quick response it appreciated.
    regards-
    sk

  • Connectivity between SAP ECC system and SAP BI

    Connectivity between SAP ECC system and SAP BI
    Hi BI-experts!
    I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
    The Loading process is hanging in processing step u201CSERVICE APIu201D.
    The process  in hanging in status "yellow" and then changed after a while to status u201Credu201D.
    [0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
    The following steps within Load process are yellow and then red:
    Extraction (messages): Missing messages
    Missing message: Request received
    Missing message: Number of sent records
    Missing message: Selection completed
    Transfer (IDocs and TRFC): Missing messages or warnings
    Request IDoc : Application document posted (is green)
    Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
    Info IDoc 1 : sent, not arrived ; Data passed to port OK
    Info IDoc 2 : sent, not arrived ; Data passed to port OK
    Info IDoc 3 : sent, not arrived ; Data passed to port OK
    Info IDoc 4 : sent, not arrived ; Data passed to port OK
    Subseq. processing (messages) : Missing messages
    Missing message: Subseq. processing completed
    DataStore Activation (Change Log) : not yet activated
    Question:
    Can some one tell me whether my distribution model or other settings are wrong?
    I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
    Thank you very much!

    Hi Holger.
    this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
    1. check your BI system logical name from the myself source system.
    2. go the ECC and run the transaction sm59
    3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
    4. double click it and edit it now check whether the Target hostname or ip is OK.
    5. In the logon tab check the client number User and password settings.
    Save it and test it with both Connection Test and Remote Logon.
    if every thing work fine i hope your problem will be solved.
    kind regards,
    Zeeshan

  • Terminology differences between MSSQL 2005/2008 and Oracle 11g

    I'm looking for some articles/books/webinars/blogs which discuss the terminology differences between MSSQL 2005/2008 and Oracle 11g in terms of database concepts. I have found this article http://www.sqlservercentral.com/articles/SQL+Server/67007 so far.
    Thanks.

    Thanks sb92075. Those returned results are almost all related to compare the features/functionalities between MSSQL and Oracle not to distinguish the terminology differences between them.

  • Time difference between the Identity system and Access System: OAM

    I was installing OAM. Performed the below steps.
    -installed identity server
    -installed webpass
    -setup of identity system console
    -installed policy manager
    -setup of access system console
    The above steps were successfull. Then when i was logging into Access system console, i am getting the below error:
    Error:there was a problem obtaining the userid. One possible reason for this is a time difference between the Identity system and Access systems (Policy Manager and Access system console).+
    The Identity Server, WebPass and Policy Manager are installed on the same machine.
    Userdata repository: OVD 10.1.4.3
    Policy and Config Data Repository: OID 11.1.1.3
    OAM: 10.1.4.3
    Windows2008 - 64bit
    Found document in metalink similar to this issue. suggested to change ldapmaxofreties. but didn't help.
    Any idea on this error. Please Advise.
    Thanks in advance.

    Try this::
    Check Time Difference Between Identity and Access Manager Systems
    Check the logfile in the Access Manager install directory. The default location is <$AMinstall_dir>/access/oblix/logs/oblogfile.
    If the file exists and it contains following line "skew = slack = " that means the Identity and Access Manager Web Servers are on different machines and have not synchronized time within a minute.
    Either synchronize times between the two machines within a minute's accuracy or you can increase the slack by modifying these two files: <$AMinstall_dir>/access/oblix/apps/common/bin/oblixbaseparams.lst: loginslack: <$IMinstall_dir>/identity/oblix/apps/common/bin/oblixbaseparams.xml: loginslack: where numofseconds is more than skew found in the oblogfile.
    For example, if you have following line in oblogfile "skew = 121 slack = 60", set numofseconds in the two parameter files to 130. After doing this, Stop the Identity Manager Web Server. Then stop the Identity Server. Start the Identity Server.
    Then start the Identity Manager Web Server. Start a new browser session and see if you get the same error.

  • Create DB link between my local system and remote system

    Hi,
    I need help to create DB link between my local system Database and remote system database both the database are oracle.
    Please check the script which i have written is correct or not. Its giving me error sql command not ended properly
    create public database link MERU_PROD_LOCAL_PROD
    CONNECT TO SUDHIR
    identified by sudhir123
    using (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS =
    (COMMUNITY = tcp.world)
    (PROTOCOL = TCP)
    (Host = 23.23.150.144)
    (Port = 1521)
    (CONNECT_DATA = (SERVICE_NAME = sudhir)
    I am executing this command in my local system connecting to the remote database link. Please suggest me is this method correct.
    Thanks
    Sudhir

    Hi Hilton,
    I fixed that issue. Now i am creating the DB link this ways please check is this proper or not
    create or replace database link meru_prod_local_prod connect to portal identified by Oracle!123 using 'MERUPROD';
    remote machine
    User Name: portal
    Password : Oracle!123
    MERUPROD is the tnsora entry
    It gives error as
    Error starting at line 1 in command:
    create or replace database link meru_prod_local_prod connect to portal identified by Oracle!123 using 'MERUPROD'
    Error at Command Line:1 Column:18
    Error report:
    SQL Error: ORA-00922: missing or invalid option
    00922. 00000 - "missing or invalid option"
    *Cause:   
    *Action:                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Legacy Timesheet System and Oracle Projects

    Dear All,
    Is it possible to interface legacy timesheet system with Oracle Projects. The intention is to enter timesheets/hours thru the legacy system and calculation of revenue and invoice in Oracle Projects.
    1)Is this achievable, without issues?
    2)How complex is this to achieve?
    3)Any URL or documentation will be really helpful in this regard.
    Thanks.
    Regards,
    Anand

    Hi
    There is no need for API.
    You should write your own script to populate the interface table.
    When you run the process PRC: Transaction Import, the system is validating the transactions. Only the valid transactions are imported as Expenditure Items. Exceptions remain in the interface, and you can review and correct those.
    Review the deatils on Oracle Projects APIs, Client Extensions and Open Interface Reference.
    Note, you should have set up a Transaction Source in Oracle Projects for your legacy Time system.
    Dina

  • How to make interconnection between a legacy system and SAP system?

    Hi Group,
    I have a query on the interconnectivity between a legacy system( non-SAP ) and an SAP system.
    The legacy provides data in the form of Files only.
    my queries are as under:
    1)
    how can I make a connection to the Legacy from my SAP system?
    2)
    what are the different ways by which I can connect these 2 different systems?
    3)
    I hope there might be a chance of connecting the systems by way of using webservices, in this case what are the things I need to follow inorder to make the connection and get the data from legacy?
    please provide me with necessary info on these queries to proceed further.
    thanks in advance.
    Regards,
    Vishnu.

    Hi,
    U can use the GUI function m modules to fetch the data from legacy systems.
    Also With the help of Remote FMs u can get connected to the SAP backgrounds from NON SAP background like Portal.XI is an interfacing tool used to connect 2 SAP or SAP to non SAP medium.
    Regards,
    Ajit.

  • Sending ebms messages between Hermes 2.0 and Oracle B2B

    Hi everyone,
    I'm a italian student and for my master thesis I need to create a comunication between Hermes 2 and Oracle B2B. I just set the trading partnership and the agreement with a custom ebxml document protocol. To create the soa application for the comunication I follow this instruction: http://tomhofte.blogspot.it/2009/11/how-to-configure-ebxml-communication-in.html but when I deploy my application there is this message: "The web service invocation was successful. However, there was no response to the invocation from the server." and there are no errors. Does anyone know another way to develop this application or have some information about this application?
    Any kind of help is welcome, thanks.

    hi,
    I solved the problem! :) the message: : "The web service invocation was successful. However, there was no response to the invocation from the server." still remaiins, however I send a message to hermes B. My mistake is that I follow the second procedure, proposed by the blog I posted in the first message, to create the mediator in jdeveloper. The first procedure instead is correct.
    thanks Anuj Dwivedi, yuor post has been helpful!

  • VISA Write differs between TS Development System and LV Run-Time Engine

    Hi all
    I made an application on LabVIEW to test BERs (Bit Error Rates), and I used VISA Write between two COM ports to exchange data.
    Everything works fine using just LabVIEW.
    Afterwards, I used TestStand to call my application (VI). The LabVIEW adapters from TestStand were set to Development System by default, and everything works OK!!
    Finally, I needed to disable the development system, and set the LabVIEW adapters from TestStand to LabVIEW Run-Time Engine and I notice that the speed of the data exchange between the two COM ports decreased dramatically.
    The only difference was the speed...because all the data (changed slowly in this case) arrived correctly on the other COM port too.
    The symptom was the same as decreasing the baud rate...but the baud rate and all the other configurations remained the same. The only difference was the change between Develpment System to Run-Time Engine to notice this decreased speed between the exchanged data using VISA Write.
    Any solutions for this?
    Thanks in advance
    Joao
    Solved!
    Go to Solution.

    Joao,
    you state that using the LV Developement System as execution platform for your LV code modules result in faster datatransfer between the COM ports than using the LV Run-Time Engine.
    So i am pondering: Does this refer to TS at all?
    Please check the following:
    Run you communication using a sole LV application in LV Developement System. This should be fast. Now build an executable of this application and run that one. Do you see the same behavior?
    If there is no difference in a sole LV approach, there have to be some settings in the TS approach making this slow. So please let us know:
    Are there different modules involved in that data transfer (which in fact points to the reply Christophe made)?
    What about loading/unloading options of the modules?
    How big is the hierarchy of the modules, e.g. is it necessary for the RTE to load stuff the Dev Env has already in memory due to loading a lvproj.......?
    Could you provide a simple example sequence+modules showing this behavior?
    What versions of LV and TS are you using?
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • SAPCONNECT  - RFC between SAP BW system and Mail Server

    Hello Everybody,
    Iam trying to enable <b>Information Broadcasting</b> feature in SAP BW System i.e; i want the queries to be send to users from BW system to their Email Ids for which i have made configurations for SMTP node in SICF and SCOT transactions.My problem is that do i need to create an RFC between BW system and Mail Server ,if yes iam not getting the way to do this and wt all parameters need to be set there .If somebody can plz guide me with the parameters that need to be set for SAPCONNECT or send me some good guide which details the creation of RFC ,I shall be highly obliged.Iam struggling with this issue since many days,You can send the guide to me on my email Id [email protected] .Your help shall be of gr8 support.Kindly revert at earliest.
    regards,
    Saumya

    Hi,
    My understanding is -
    you need to following setting to send mails-
    http://help.sap.com/saphelp_nw04/helpdata/en/66/9c25413fabef23e10000000a155106/content.htm
    Need this, if planning to use fax, SMs etc-
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/content.htm
    hope it helps
    regards
    Vikash

Maybe you are looking for