Interfaces/SID full????

I checked that filesystem interfaces/SID is 1GB and is 100% full
out of which 900 MB is occupied by directory
/interfaces/C38/C38010/in
following are contents of it
du -sk *|sort -nr|head -10
377602 unprocessed
339712 processed
127034 logs
116785 failed
3552    archived
72      cats_2004-11.txt
3       AA0614051.SAP
3       AA061405.SAP
1       CA_CHANGE_CTRL.txt
Can we delete any of this files
What is the importance of this filesystem
help appreciated

Hello Ameya,
This must be the directory where the files used as interface import or created as interface output might be getting stored. Not a SAP directory. Of course business must be consulted. In our case we daily keep on archivng files older than 3 months to a seperate directory using shell script from where we take a backup as on tape and later on delete them from the system u. Other option is to increase space for the file system.
Regards.
Ruchit.

Similar Messages

How to display web interface in full screen mode

Hi,
I would like to view my web interface in full screen mode in internet explorer. Is there anyway we can switch off the toolbars and URL automatically while calling the web interface
Thanks
SR

Hello SR,
I don't think it is possible to do this directly in the web interface. Otherwise many websites would change your browser settings.
It's possible to set the window properties, when the window is opened from JavaScript for example. So you could create a dummy start page and add some JavaScript to open a window for the web interface with the settings you require. Here's a good page that explains it:
http://www.fontstuff.com/frontpage/fptut06.htm
Regards
Marc
SAP NetWeaver RIG

Files are missing in the /usr/sap/interfaces/SID directory

hello Gurus,
Please help on this.
We have move the system to another host af4ho133, after moving, the files in the directory /usr/sap/interfaces/SID are now missing. The Daily loads jobs got failed due to unable to access the files placed in AL11. All the files are placed in old path(Host),In the changed host no files were placed.
Please extend your assistance.

Hi,
If you move the all the files from one one host to another host, it does not work, you need to use the system copy
please go thr below link it will help you
System Copy and Migration
Thanks,
Sreeni.

File system /usr/sap/SID full

Hello All,
File system /usr/sap/SID getting full
I have rese trace from SAP level but still file system rapidly increasing...
below 2 files rapidly incrasing more space in file system
hostname:sidadm 136> du -sk dev_server1
31400   dev_server1
hostname:sidadm 136> pwd
/usr/sap/SID/DVEBMGS02/work
more dev_server1
[Thr 76096] * LOCATION    SAP-Gateway on host xxxx / sapgw02
[Thr 76096] * ERROR       registration of tp SLD_NUC from host xxxx not allowed
[Thr 76096] *
TIME        Sat Mar 27 13:05:32 2010
[Thr 76096] * RELEASE     700
[Thr 76096] * COMPONENT   SAP-Gateway
[Thr 76096] * VERSION     2
[Thr 76096] * RC          720
[Thr 76096] * MODULE      gwxxrd.c
[Thr 76096] * LINE        3766
[Thr 76096] * COUNTER     60935963
[Thr 76096] *
[Thr 76096] *****************************************************************************
[Thr 76096] *** ERROR => SAP_CMACCPTP3: wrong rqtype SAP_ACCPTP [r3cpic_mt.c 10240]
[Thr 75582]
Please help me to solve permently
Regards
Mohsin

Hi Gaurav,
I got the issue, problem was that the reginfo and secinfo on my ABAP system which was connected to my JAVA system, it was not allowing the requests to pass through and hence it was not getting registered. I deactivated the parameters of reginfo and secinfo and its now working fine.
I will look into the issue of where i went wrong with reginfo/secinfo

How to display popup at the web interface side while checking a sh cart

Hi Experts,
I have a requirement to get the popup while checking the shopping cart..
I have implemented the badi BBP_DOC_CHECK_BADI..(Classic scenario)
In this badi , i am using one RFC FM to check the item details availability in the backend..I am getting the desired functionality. But I have a specific requirement to show popup when the items in the shopping cart are not available in the inventory that is maintained the backend R/3 system..
Can you please advise me how to write a popup in the web interface when stock is not available for a perticular item? Any HTML code available for the same?
Please advise me?
2) How to change status of an shopping cart item or else need to display some customized information for the item like 'This Item is in back order status '.
    The above situation arises when we are trying to check a shopping cart item status after ordering the shopping cart.
thank you!!

Hi Ravindranath,
Try to add a standard message like:
message e100(ZBBP_SC) into lf_dummy.
clear ls_message.
ls_message-msgty       = sy-msgty.
        ls_message-msgid         = sy-msgid.
        ls_message-msgno     = sy-msgno.
        shift ls_message-msgv1 left deleting leading '0'.
        select single text from t100 into ls_message-message
                                    where sprsl = sy-langu
                                      and arbgb = sy-msgid
                                      and msgnr = sy-msgno.
        append ls_message to et_messages.
Regards,
Marcin Gajewski

Full screen interface?

Hi
Anyone knwo how to make a interface in premiere pro cs6 full screen?
I dont mean full screen "playback".
I am sure it can be done and its driving me crazy!
Thanks
Philip

Hi Jeff
Thanks so much that's all very helpful. In regards to my full screen question I may be imagining it but I'm sure I heard you can bring the entire interface to full screen like you would with iPhoto or a web page etc.
Thanks again for such a quick response!
Cheers
Philip
Sent from my iPhone

Input and CRC errors on ASA 5505 outside interface

All,
I see input and crc errors on my ASA 5505 eth0/0(outside) interface and packet drops. There is very slow connection though we have 20mb line. ISP also sees the issue on the Lan interface side. We have the speed and duplex configured same on both ISP and our end.
I am suspecting if this is Physical cable issue. Please suggest.
Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
        Full-Duplex(Full-duplex), 100 Mbps(100 Mbps)
        Input flow control is unsupported, output flow control is unsupported
        Available but not configured via nameif
        MAC address 001a.b4c9.f3d9, MTU not set
        IP address unassigned
        158138067 packets input, 141061681082 bytes, 0 no buffer
        Received 183037 broadcasts, 0 runts, 0 giants
        19642 input errors, 19642 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 pause input, 0 resume input
        0 L2 decode drops
        144684 switch ingress policy drops
        124291353 packets output, 38197278051 bytes, 0 underruns
        0 pause output, 0 resume output
        0 output errors, 0 collisions, 0 interface resets
        0 late collisions, 0 deferred
        0 rate limit drops
        0 switch egress policy drops
        0 input reset drops, 0 output reset drops

Hello Ravi,
This kind of issues CRCs/ Input Errors are tipically known as L1 issues so make sure you check the cable and if that does not make a difference change the port on each side to see if there is a difference.
Unfortunetly the ASA does not support the Time-Domain Reflectometer feature so we must do the test of L1 by ourselfs.
Can you clear the counters of the interface, test the changes provided and provide us some feedback?
Looking for some Networking Assistance?
Contact me directly at [email protected]
I will fix your problem ASAP.
Cheers,
Julio Carvajal Segura
http://laguiadelnetworking.com

Need to post Full Load data (55,000 records) to the target system.

Hi All,
We are getting the data from SAP HR system and we need to post this data to the partner system. So we configured Proxy(SAP) to File(Partner) scenario. We need to append the data of each message to the target file. Scince this is a very critical interface, we have used the dedicated queues. The scenario is working fine in D. When the interface transported to Q, they tested this interface with full load i.e with 55,000 messages.All messages are processed successfully in Integration Engine and to process in Adapter engine, it took nearly 37 hrs. We need to post all 55,000 records with in 2 hrs.
The design of this interface is simple. We have used direct mapping and the size of each message is 1 KB. But need to append all messages to one file at the target side.We are using Advantco sFTP as receiver adapter and proxy as a sender.
Could you please suggest a solution to process all 55,000 messages with in 2hrs.
Thanks,
Soumya.

Hi Soumya,
I understand your scenario as, HR data has be send to third party system once in a day. I guess, they are synchronizing employee (55,000) data in third party system with SAP HR data, daily.
I would design this scenario as follows:-
I will ask ABAPer to write a ABAP program, which run at 12:00, pickup 55,000 records from SAP HR tables and place them in one file. That file will be placed in SAP HR file system (you can see it using al11). At 12:30, PI File channel will pick up the file and transfer the file to third party target system as it is, without any transformation. File to File, pass through scenario (no ESR objects). Now, ask the target system to take the file, run their program (they should have some SQL routines). That SQL program will insert these records into target system tables.
If 55,000 records make huge file at SAP HR system, ask ABAPer to split it into parts. PI will pick them in sequence based on file name.
In this approach, I would ask both SAP HR (sender) and third party (target) system people to be flexible. Otherwise, I would say, it is not technically possible with current PI resources. In my opinion, PI system is middleware, not system in which huge computations can be done. If messages are coming from different systems, then collection in middleware makes sense. In your case, collecting large number of messages from single system, at high frequency is not advisable.
If third party target system people are not flexible, then go for File to JDBC scenario. Ask SAP HR ABAPer to split input file into more number of files (10-15, you PI system should be able to handle). At receiver JDBC, use native SQL. You need java mapping to construct, SQL statements in PI. Donu2019t convert flat file to JDBC XML structure, in your case PI cannot handle huge XML payload.
You have to note, hardware upgrade is very difficult (you need lot of approvals depending your client process) and very costly. In my experience hardware upgrade will take 2-3 months.
Regards,
Raghu_Vamsee

[vmware] Virtual machine communication interface failed

hello,
on a fresh install of archlinux, i have installed vmware workstation 11.0 but when i execute this command :
vmware-modconfig --console --install-all
i have this error
Virtual machine communication interface failed
full log
vmware-modconfig --console --install-all
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/cpuid.o
/tmp/modconfig-sc9HDC/vmmon-only/linux/driver.c:1332:1: attention : always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/task.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-sc9HDC/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/modconfig-sc9HDC/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-sc9HDC/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-sc9HDC/vmmon-only/vmmon.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
cp -f vmmon.ko ./../vmmon.o
make : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmmon-only »
make : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/driver.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/hub.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/userif.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/netif.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/bridge.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/procfs.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/smac.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/vnetEvent.o
CC [M] /tmp/modconfig-sc9HDC/vmnet-only/vnetUserListener.o
LD [M] /tmp/modconfig-sc9HDC/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-sc9HDC/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-sc9HDC/vmnet-only/vmnet.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
cp -f vmnet.ko ./../vmnet.o
make : on quitte le répertoire « /tmp/modconfig-sc9HDC/vmnet-only »
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
[root@hulk vmware-root]# ls
vmware-818.log vmware-authdlauncher-2058.log vmware-vmis-1888.log
vmware-apploader-1976.log vmware-vmis-1407.log vmware-vmis-1910.log
vmware-apploader-818.log vmware-vmis-1429.log
[root@hulk vmware-root]# chown gael:users *
[root@hulk vmware-root]# chown -R gael:users ./
[root@hulk vmware-root]# modprobe vmci
modprobe: FATAL: Module vmci not found.
[root@hulk vmware-root]# vmware-modconfig --console --install-all -v
/usr/lib/vmware/bin/vmware-modconfig-console: invalid option -- 'v'
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-KdpHql/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/cpuid.o
/tmp/modconfig-KdpHql/vmmon-only/linux/driver.c:1332:1: attention : always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/task.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-KdpHql/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/modconfig-KdpHql/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KdpHql/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-KdpHql/vmmon-only/vmmon.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
cp -f vmmon.ko ./../vmmon.o
make : on quitte le répertoire « /tmp/modconfig-KdpHql/vmmon-only »
make : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
Using kernel build system.
/sbin/make -C /lib/modules/3.17.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1] : on entre dans le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
CC [M] /tmp/modconfig-KdpHql/vmnet-only/driver.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/hub.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/userif.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/netif.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/bridge.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/procfs.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/smac.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/vnetEvent.o
CC [M] /tmp/modconfig-KdpHql/vmnet-only/vnetUserListener.o
LD [M] /tmp/modconfig-KdpHql/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KdpHql/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-KdpHql/vmnet-only/vmnet.ko
make[1] : on quitte le répertoire « /usr/lib/modules/3.17.4-1-ARCH/build »
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1] : on entre dans le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
make[1]: « postbuild » est à jour.
make[1] : on quitte le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
cp -f vmnet.ko ./../vmnet.o
make : on quitte le répertoire « /tmp/modconfig-KdpHql/vmnet-only »
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
thanks for your help

Also having the same problem
dustin ~ $ sudo vmware-modconfig --console --install-all
[sudo] password for dustin:
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make: Entering directory '/tmp/modconfig-KZzuso/vmmon-only'
Using kernel build system.
/sbin/make -C /lib/modules/3.18.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/lib/modules/3.18.4-1-ARCH/build'
CC [M] /tmp/modconfig-KZzuso/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/cpuid.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/task.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-KZzuso/vmmon-only/vmcore/moduleloop.o
/tmp/modconfig-KZzuso/vmmon-only/linux/driver.c:1332:1: warning: always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^
LD [M] /tmp/modconfig-KZzuso/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KZzuso/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-KZzuso/vmmon-only/vmmon.ko
make[1]: Leaving directory '/usr/lib/modules/3.18.4-1-ARCH/build'
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-KZzuso/vmmon-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-KZzuso/vmmon-only'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory '/tmp/modconfig-KZzuso/vmmon-only'
make: Entering directory '/tmp/modconfig-KZzuso/vmnet-only'
Using kernel build system.
/sbin/make -C /lib/modules/3.18.4-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/lib/modules/3.18.4-1-ARCH/build'
CC [M] /tmp/modconfig-KZzuso/vmnet-only/driver.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/hub.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/userif.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/netif.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/bridge.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/procfs.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/smac.o
CC [M] /tmp/modconfig-KZzuso/vmnet-only/vnetEvent.o
In file included from include/linux/pci.h:34:0,
from /tmp/modconfig-KZzuso/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-KZzuso/vmnet-only/netif.c:43:
include/linux/pci_ids.h:2248:0: warning: "PCI_VENDOR_ID_VMWARE" redefined
#define PCI_VENDOR_ID_VMWARE 0x15ad
^
In file included from /tmp/modconfig-KZzuso/vmnet-only/net.h:38:0,
from /tmp/modconfig-KZzuso/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-KZzuso/vmnet-only/netif.c:42:
/tmp/modconfig-KZzuso/vmnet-only/vm_device_version.h:56:0: note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15AD
^
CC [M] /tmp/modconfig-KZzuso/vmnet-only/vnetUserListener.o
In file included from /tmp/modconfig-KZzuso/vmnet-only/net.h:38:0,
from /tmp/modconfig-KZzuso/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-KZzuso/vmnet-only/bridge.c:52:
/tmp/modconfig-KZzuso/vmnet-only/vm_device_version.h:56:0: warning: "PCI_VENDOR_ID_VMWARE" redefined
#define PCI_VENDOR_ID_VMWARE 0x15AD
^
In file included from include/linux/pci.h:34:0,
from /tmp/modconfig-KZzuso/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-KZzuso/vmnet-only/bridge.c:51:
include/linux/pci_ids.h:2248:0: note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15ad
^
LD [M] /tmp/modconfig-KZzuso/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-KZzuso/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-KZzuso/vmnet-only/vmnet.ko
make[1]: Leaving directory '/usr/lib/modules/3.18.4-1-ARCH/build'
/sbin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-KZzuso/vmnet-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-KZzuso/vmnet-only'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory '/tmp/modconfig-KZzuso/vmnet-only'
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
Now I have the same failed communication interface also
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface failed
VM communication interface socket family done
Blocking file system done
Virtual ethernet done
VMware Authentication Daemon done
Unable to start services
PS, I have the vmware-patch 11.0.0-1 installed

How to generate different report view in teststand for the same execution?

My requirment is to have two different view for the same report that gets generated during one execution using in TestStand OI(CVI)? One view would be summary view (displays only test step types, excluding action step types) and the other view is detail view that displays all the steps that are recorded. Data for all the steps needs to get recorded in database. Any suggestions are helpful!!
CLD,CTD

Hello.
I think you would have to create two separate reports, one as summary report and one as a 'full' report The viewers are just 'viewers' and simply display whatever you set to them.
I had display a text report that was basically a summary report ( failures only ) and then display an HTML report that contained all steps were set to be recorded. This required quite a bit of modifications on both the process model and the operator interface side. The operator interface (in LabVIEW ) had to contain 2 separate UIReportView controls.
Let me know if that is your desired direction and I could point you to some more ideas.
Thanks,
PH

D7260 Duplex problem

Hi,
I printed a 12 page document on my D7260 and manually duplexed. The back of pages 8 & 9 were blank.
the back of pg 7 had page 10.
My driver says last configured on 12/08/2008.
Do I need new drivers? If so, where do I find them?
Using Word 2007 on Vista Ultimate 64 bit SP 2
Thanks
Frank GC

Hi Jan,
If you are connecting Router to WAN0_0 port, you should use cross-over cable under most of the circumstances and unless you are using all gig interfaces on both sides. This will avoid any hardware limitations due to non-Auto-MDIX supported hardware.
Cisco strongly recommend that you do not use half-duplex connections on the WAE or on routers, switches, or other devices.
You will find more information here: Cabling
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/wae/module/inline/installation/guide/17880fru.html#wp39911
Further, there is a possibility that the interface on Router / WAE inline adapater / cable might be bad. I would suggest following in that case.
1. Using a new cross-over / stright cable. if the issue continues, proble lies on the interface sides.
2. Using a different port on router. if the issue continues, problem is with WAN0_0 port of WAE.
3. Try connecting wan0_0 port to another switch / router to see if it negotiates at full duplex. If it still continues at half duplex, there is an issue with WAN0_0 port most probably.
4. Try connecting secondary gig port or WAN0_1 port to same router interface. If the issue continues, problem may be with router FA0/0 interface.
If you find that issue is with either router / WAE inline interface, please open a TAC case for RMA.
Hope this helps.
Regards.
PS: If this resolves your issue, please mark this as Answered.

OSPF PTP with ASA

Hello
I am trying to bring up a L3 PTP between an ASA and a 6500 running IOS.   The ASA is in routed mode configured for OSPF. On the ASA I configure the interface to the 6500 with an IP address and define the network type as point-to-point.   I add that network to the OSPF process configuration. Likewise on the 6500 I configure the interface as a L3 interface with IP and network type as point-to-point.   I add the same /30 network to that OSPF process. I can ping across the /30 both ways but the adjacency is not forming.   The ASA debugs show the hello coming from the correct 6500 interface.   However the ASA can't find the 6500 interface. The debug indicates "cannot locate nbr x.x.x.x (ip address of 6500 interface).
When I remove the "ospf network point-to-point nonbroadcast" command on the ASA the adjacency does form.    However, on the ASA side it's "2way/drother" and on the 6500 side "full".   The LSDB's look good.   But the 6500 is not injecting the routes advertised from the ASA into the routing table.
Thoughts? I suspect I am missing a concept or simple command.   As far as I can tell this is a supported configuration on the ASA.    But have not been able to find any point-to-point configuration examples.
Any information is much appreciated.
Thanks
Chuck

On the ASA the "non-broadcast" option is required. When I try to leave it off I get a "command incomplete" message.
There are no other options available so I used "ospf network point-to-point non-broadcast" option.
On the 6500 IOS switch I can simply put in "ip ospf network point-to-point" with no further options. Here the "non-broadcast" option is not available even if I wanted it.
So with the ASA using "ospf network point-to-point nonbroadcast" and the 6500 IOS using "ip ospf network point-to-point" I can't get the adjacency up.   Both network types are listed as "POINT-TO-POINT" for each interface.
Any further thougths anyone?   Is there a different command on the ASA that doesn't require the non-broadcast option?
Chuck

[USB network problem]arm linux to use RNDIS host funtion

I am trying to use RNDIS host function on my arm linux device,so i can use android phone to browse my device's WebUI with usb cable plug in.
my device's platform is at91sam9260,kernel version 2.6.19
if i plug my android phone into my device and set phone's usb tethering fuction on, my device can find it.But usb0 network device never show up.
[root@ICIM ~]# usb 1-1: USB disconnect, address 2
usb 1-1: new full speed USB device using at91_ohci and address 3
usb 1-1: configuration #1 chosen from 1 choice
[root@ICIM ~]# lsusb
Bus 001 Device 003: ID 04e8:6863 Samsung Electronics Co., Ltd
Bus 001 Device 001: ID 0000:0000
root@ICIM ~]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:24:DE:00:02:40
inet addr:192.168.0.81 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:21 Base address:0x4000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:100 (100.0 B) TX bytes:100 (100.0 B)
if i plug my android phone into a linux PC and set phone's usb tethering fuction on, the linux PC can find my phone, and I can find the usb0 network.
then i ping my phone from the linux PC, and it success
[root:/home/xjl/EMS_Kernel/linux-2.6.19_ICIM] lsmod |grep rndis_host
rndis_host 7108 0
cdc_ether 6464 1 rndis_host
usbnet 13646 2 rndis_host,cdc_ether
[root:/home/xjl/EMS_Kernel/linux-2.6.19_ICIM] ifconfig -a
eth1 Link encap:Ethernet HWaddr 00:16:76:D4:98:EC
inet addr:192.168.5.158 Bcast:192.168.5.255 Mask:255.255.255.0
inet6 addr: fe80::216:76ff:fed4:98ec/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12142625 errors:0 dropped:0 overruns:10372 frame:10372
TX packets:7310990 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2921302257 (2.7 GiB) TX bytes:3720558580 (3.4 GiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:720 (720.0 b) TX bytes:720 (720.0 b)
usb0 Link encap:Ethernet HWaddr CE:3A:A2:93:89:73
inet addr:192.168.42.101 Bcast:192.168.42.255 Mask:255.255.255.0
inet6 addr: fe80::cc3a:a2ff:fe93:8973/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:11 errors:0 dropped:0 overruns:0 frame:0
TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1094 (1.0 KiB) TX bytes:5718 (5.5 KiB)
[root:/home/xjl/EMS_Kernel/linux-2.6.19_ICIM] ping 192.168.42.129
PING 192.168.42.129 (192.168.42.129) 56(84) bytes of data.
64 bytes from 192.168.42.129: icmp_seq=1 ttl=64 time=2.17 ms
64 bytes from 192.168.42.129: icmp_seq=2 ttl=64 time=0.473 ms
64 bytes from 192.168.42.129: icmp_seq=3 ttl=64 time=0.543 ms
64 bytes from 192.168.42.129: icmp_seq=4 ttl=64 time=1.27 ms
64 bytes from 192.168.42.129: icmp_seq=5 ttl=64 time=0.568 ms
64 bytes from 192.168.42.129: icmp_seq=6 ttl=64 time=1.21 ms
64 bytes from 192.168.42.129: icmp_seq=7 ttl=64 time=1.21 ms
64 bytes from 192.168.42.129: icmp_seq=8 ttl=64 time=1.24 ms
64 bytes from 192.168.42.129: icmp_seq=9 ttl=64 time=1.20 ms
64 bytes from 192.168.42.129: icmp_seq=10 ttl=64 time=0.505 ms
^C
--- 192.168.42.129 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9850ms
rtt min/avg/max/mdev = 0.473/1.041/2.176/0.506 ms
[root:/home/xjl/EMS_Kernel/linux-2.6.19_ICIM]
below is my kernel's configuration on usb. In the Linux pc, the RNDIS host function use rndis_host.ko cdc_ether.ko usbnet.ko.
I compile all these drivers into my kernel, but it doesn't work.
usb support
<*> Support for Host-side USB │ │
│ │ [ ] USB verbose debug messages │ │
│ │ --- Miscellaneous USB options │ │
│ │ [*] USB device filesystem │ │
│ │ [ ] Enforce USB bandwidth allocation (EXPERIMENTAL) │ │
│ │ [ ] Dynamic USB minor allocation (EXPERIMENTAL) │ │
│ │ --- USB Host Controller Drivers │ │
│ │ < > ISP116X HCD support │ │
│ │ <*> OHCI HCD support │ │
│ │ < > SL811HS HCD support │ │
│ │ --- USB Device Class drivers │ │
│ │ <*> USB Modem (CDC ACM) support │ │
│ │ < > USB Printer support │ │
│ │ --- NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' │ │
│ │ --- may also be needed; see USB_STORAGE Help for more information │ │
│ │ < > USB Mass Storage support │ │
│ │ [ ] The shared table of common (or usual) storage devices │ │
│ │ --- USB Input Devices │ │
│ │ < > USB Human Interface Device (full HID) support │ │
│ │ USB HID Boot Protocol drivers ---> │ │
│ │ < > Aiptek 6000U/8000U tablet support │ │
│ │ < > Wacom Intuos/Graphire tablet support │ │
│ │ < > Acecad Flair tablet support │ │
│ │ < > KB Gear JamStudio tablet support │ │
│ │ < > Griffin PowerMate and Contour Jog support │ │
│ │ < > USB Touchscreen Driver │ │
│ │ < > Yealink usb-p1k voip phone │ │
│ │ < > X-Box gamepad support │ │
│ │ < > ATI / X10 USB RF remote control │ │
│ │ < > ATI / Philips USB RF remote control │ │
│ │ < > Keyspan DMR USB remote control (EXPERIMENTAL) │ │
│ │ < > Apple USB Touchpad support │ │
│ │ --- USB Imaging devices │ │
│ │ < > USB Mustek MDC800 Digital Camera support (EXPERIMENTAL) │ │
│ │ < > Microtek X6USB scanner support │ │
│ │ USB Network Adapters ---> │ │
│ │ [*] USB Monitor │ │
│ │ --- USB port drivers │ │
│ │ USB Serial Converter support --->
usb network adapters
< > USB CATC NetMate-based Ethernet device support (EXPERIMENTAL) │ │
│ │ <*> USB KLSI KL5USB101-based ethernet device support │ │
│ │ < > USB Pegasus/Pegasus-II based ethernet device support │ │
│ │ < > USB RTL8150 based ethernet device support (EXPERIMENTAL) │ │
│ │ <*> Multi-purpose USB Networking Framework │ │
│ │ <M> ASIX AX88xxx Based USB 2.0 Ethernet Adapters │ │
│ │ --- CDC Ethernet support (smart devices such as cable modems) │ │
│ │ < > GeneSys GL620USB-A based cables │ │
│ │ <M> NetChip 1080 based cables (Laplink, ...) │ │
│ │ < > Prolific PL-2301/2302 based cables │ │
│ │ < > MosChip MCS7830 based Ethernet adapters │ │
│ │ <*> Host for RNDIS devices (EXPERIMENTAL) │ │
│ │ <*> Simple USB Network Links (CDC Ethernet subset) │ │
│ │ [ ] ALi M5632 based 'USB 2.0 Data Link' cables │ │
│ │ [ ] AnchorChips 2720 based cables (Xircom PGUNET, ...) │ │
│ │ [*] eTEK based host-to-host cables (Advance, Belkin, ...) │ │
│ │ [*] Embedded ARM Linux links (iPaq, ...) │ │
│ │ [ ] Epson 2888 based firmware (DEVELOPMENT) │ │
│ │ <M> Sharp Zaurus (stock ROMs) and compatible
anyone familiar with the RNDIS host can help me ? Is my configuration of the kernel right?
Last edited by snakewind (2013-06-08 08:04:06)

We don't support archlinux-arm here, try archlinuxarm.org.

Duplex problem with inline card "WAN0" again

Hi,
We got duplex problem again "new site" for the inline port WAN0, LAN0 is ok.
We have tried crossover and straight through cable, without any look still 100/ half duplex.
The PTT router int fa0/0 have been to 100/full and auto/auto still 100 half in the WAE.
The WAE have been in 100/full, no link or auto/auto link but 100/half.
What can be the problem, as we have this issue with most of our 574 and 274, the 674 have have no problem at all?
Below are some output from the WAE and router.
PTT router:
#sh ver
Cisco IOS Software, 1841 Software (C1841-SPSERVICESK9-M), Version 12.4(6)T7, RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 29-Mar-07 03:29 by khuie
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Router uptime is 5 weeks, 1 day, 5 minutes
System returned to ROM by power-on
System restarted at 08:09:29 GMT Sun Aug 15 2010
System image file is "flash:c1841-spservicesk9-mz.124-6.T7.bin"
Cisco 1841 (revision 7.0) with 116736K/14336K bytes of memory.
Processor board ID FCZ112411HV
2 FastEthernet interfaces
1 Serial interface
1 Serial(sync/async) interface
1 Channelized E1/PRI port
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
63488K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
#sh int fa0/0
FastEthernet0/0 is up, line protocol is up
Hardware is Gt96k FE, address is 001b.d5ab.3fc8 (bia 001b.d5ab.3fc8)
Internet address is 10.252.105.12/22
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Half-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 103000 bits/sec, 89 packets/sec
5 minute output rate 625000 bits/sec, 93 packets/sec
     110094543 packets input, 2604076581 bytes
     Received 10013739 broadcasts, 0 runts, 0 giants, 0 throttles
     21 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog
     0 input packets with dribble condition detected
     110416771 packets output, 4153304953 bytes, 0 underruns
     149371 output errors, 113762 collisions, 149376 interface resets
     0 babbles, 149940 late collision, 0 deferred
     0 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out
From the WAE:
#sh interface inlineport InlineGroup 1/0/wan
                                     ^
% Invalid input detected at '^' marker.
ZAJOPWAAS01#sh interface inlineport 1/0/wan
Device name        : eth4. Bypass master interface.
Packets Received   : 59466951
Packets Intercepted: 50007028
Packets Bridged    : 10002103
Packets Forwarded : 44722188
Packets Dropped    : 69
Packets Received on native      : 0
Active flows for this interface : 0
Ethernet Driver Status
Type:Ethernet
Ethernet address:00:E0:ED:11:E5:A8
Maximum Transfer Unit Size:1500
Metric:1
Packets Received: 59466909
Input Errors: 0
Input Packets Dropped: 0
Input Packets Overruns: 0
Input Packets Frames: 0
Packet Sent: 64238956
Output Errors: 116996
Output Packets Dropped: 0
Output Packets Overruns: 0
Output Packets Carrier: 116996
Output Queue Length:100
Collisions: 182840
Base address:0x5000
Flags:UP BROADCAST RUNNING MULTICAST
Link State: Interface is up,line protocol up
Mode: autoselect, half-duplex, 100baseTX
1#sh ver
Cisco Wide Area Application Services Software (WAAS)
Copyright (c) 1999-2010 by Cisco Systems, Inc.
Cisco Wide Area Application Services (WAAS-UNIVERSAL-K9) Software Release 4.2.1
(build b38 Jun 16 2010)
Version: oe574-4.2.1.38
Compiled 20:44:26 Jun 16 2010 by damaster
Device Id: 00:26:55:ad:cd:04
System was restarted on Mon Aug 30 16:48:52 2010.
The system has been up for 2 weeks, 6 days, 17 hours, 52 minutes, 10 seconds.
Jan Rockstedt

Hi Jan,
If you are connecting Router to WAN0_0 port, you should use cross-over cable under most of the circumstances and unless you are using all gig interfaces on both sides. This will avoid any hardware limitations due to non-Auto-MDIX supported hardware.
Cisco strongly recommend that you do not use half-duplex connections on the WAE or on routers, switches, or other devices.
You will find more information here: Cabling
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/wae/module/inline/installation/guide/17880fru.html#wp39911
Further, there is a possibility that the interface on Router / WAE inline adapater / cable might be bad. I would suggest following in that case.
1. Using a new cross-over / stright cable. if the issue continues, proble lies on the interface sides.
2. Using a different port on router. if the issue continues, problem is with WAN0_0 port of WAE.
3. Try connecting wan0_0 port to another switch / router to see if it negotiates at full duplex. If it still continues at half duplex, there is an issue with WAN0_0 port most probably.
4. Try connecting secondary gig port or WAN0_1 port to same router interface. If the issue continues, problem may be with router FA0/0 interface.
If you find that issue is with either router / WAE inline interface, please open a TAC case for RMA.
Hope this helps.
Regards.
PS: If this resolves your issue, please mark this as Answered.

GLC-SX-MM auto detecting as half duplex

I have a 3945 router with a GLC-SX-MM connected to a Canoga 9145 with a 5 meter patch cable going to AT&T as a 100Mb Metro-E
Our performance is poor measuring about 4Mb up and 15Mb down. I have tried various test sites.
A show interface is showing: Half Duplex, 1Gbps, media type is SX
We are seeing a lot of output errors and TCP reassembly queue overflows
If I force the interface to full duplex I stop getting output errors and queue overflows but start getting interface resets. My performance also goes sub 1Mb
The ISP confirms their interface on the Canoga is properly configured. We have also replaced the patch cable.
Does anyone have any thoughts on possible causes?
Gary
http://bytesolutions.com

You're using a 1 Gbps interface and your SP is provisioning a 100 Mbps circuit? That doesn't make sense. Depending on your equipment, you should be using something like the GLC-FE-100FX=, a 100 Mbps SFP. (See http://www.cisco.com/en/US/customer/products/hw/modules/ps5455/products_device_support_tables_list.html )
Otherwise where is the buffering and queuing take place - in the Canoga? From its application guide, I believe it is intended to be used with the fiber on the provider side and the subscriber side is copper. Your post seems to describe the reverse setup.

Interfaces/SID full????

Similar Messages

Maybe you are looking for