Internal Application Error

Whenever I try to convert a certain .mpg file into a .flv, I
get the following error:
2008-08-13 13:40:54 : ENCODING FAILED
- Source file: [censored].mpg
- Output file: [censored].flv
- Video codec: On2 VP6
- Alpha channel encoded: no
- Deinterlace: no
- Frame rate: 0 fps
- Key frame interval: 0 frames
- Video data rate: 150 kbps
- Width: 0 pixels
- Height: 0 pixels
- Audio codec: MPEG Layer III (MP3)
- Audio data rate: 32 kbps (mono)
- FLV duration: 00:00:00
- Encoding time: 00:02:36
====================================================================
An internal application error occurred.
====================================================================
How can I fix this?
Thank you!
-Nut

Well, what are you using to try the conversion? That may
help...

Similar Messages

Internal application error in scheduling a dis file.

Hi friends , i am finding a problem in scheduling a dis file . discoverer says internal application error. some other files are getting scheduled. the query for this particaular report is long. any suggestions , its urgent.................. discoverer version is 4.1 .

Hi,
Not really enough informatoin to debug via a forum, you may need a Service Request with Oracle Support. If staying on 4.1 (recommend 10.1.2.0.2), I suggest you are patched to 4.1.48.08
Additionally, ensure the worksheet runs to completion without scheduling... since you mentioned it is long you may need to increase the data cache, etc.
Regards,
Steve

Internal Application Error With Panic Transmit

I have been using Panic Transmit for years with Tiger, and Snow Leopard without any problems to upload to a server that handles my web site. I now have Lion and every time I try to upload a corrected page for my web site I get the following error message.
I am not sure if it has to do with any Apple functions or the remote server that I am using, I am not very familiar with this.
Below is the error message I get every time I open up Transmit to upload a page, can someone tell me if it has to do with some thing in my OS Lion or ? The message below is what I get.
An internal application error has occurred. This error will cause instability, and it is recommended you quit and relaunch Transmit. I am not including the stack frame backtrace since it is very long. In the Console log, I have the message after the Problem Details.
Problem Details:
Application:     Transmit [4095]
Version:         4.1.7
Identifier:      com.panic.Transmit
Exception:       NSRangeException
Reason:          [NOTE: this exception originated in the server.]
*** -[__NSArrayM objectAtIndex:]: index 10 beyond bounds [0 .. 9]
Date/Time:       2011-12-31 21:06:21 +0000
OS Version:      Version 10.7.2 (Build 11C74)
Architecture:    Intel
Report Version: 6
Anonymous UUID: E66005C9-FE03-454A-92DD-0580E743FEB0
Console Log:
2011-12-31 13:51:52.000 Transmit[4095] CFURLCreateWithString was passed this invalid URL string: '/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
Please help, this is all confusing to me.
Daisymay

Hi jakesan,
At the time I was using Transmit last year to FTP to a server that was handling my website, I did not have any problems using Snow Leopard, it was when I installed Lion that I had a problem. I just looked at all of my old emails when I was sending back and forth information like plist etc., to Les a Panic tech. I spent about three weeks sending information to him, and he could not find out what the problem was, so I just stopped using Transmit.
I just clicked on Transmit to open up the application, and I still get the window with the error saying that
"An internal application error has occurred." I installed the new update to version 4.2 and got the same message.
Last year the company that I was using to host my website went out of business, and so I went with
Go Daddy, and I have been using their FTP program to make changes to my website as needed and I don't have any problems.
Some day I still may try to find out what is going on but when I mentioned this to Go Daddy in January, 2012 the tech's said that there have been many complaints on the web about this problem.
I don't know if anyone is having this problem with Mountain Lion, I have not downloaded the new operating system yet, maybe someone can let us know if they still have a problem with Transmit 4.2 and Mountain Lion.
Hope this helps you, but for now I would look at another FTP program to use, and maybe "Google" what would work with Lion or Mountain Lion.
Have a good Holiday Season,
Daisymay

What does the "unexpected internal application error" mean?

Hi Everyone,
I just saw this message for the first time tonight. Does anyone know what it really indicates?
"An unexpected internal application error has occurred. Please get in contact with <MyCompanyName> and provide reference# for further investigation."
This message doesn't look familiar to me at all. I don't know where Apex is getting my company name from. Any ideas?
Thanks,
Kim

Hi Kim,
I assume you are using the Sample Database Application or similar app. This message is displayed by the "Error Handling Function" of the application. Go to "Edit Application Properties" -> "Error Handling" -> "Error Handling Function". The referenced function is a stored function or package in the database which contains the necessary code to handle error in application. It allows you to map errors to a new error text. See http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-1/ and http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-2/
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Raise Application Error on Dynamic Action

Hi
I am using Apex 4.2. On a click of button a Dynamic Action is written, which calls a DB Package. The DB package has exception handlers and also the package has two output parameters
Error Code and Error Msg
So in my code(Dynamic Code) i make a call to the package and checks the value for Erroc Code.
Begin
Package call......
If v_error_code <> '0' Then
    Raise SC_Error;
End if;
Exception
When SC_Error Then
    RAise_Application_error(v_err_code, v_err_msg);
End;
But when i run the page and I click I get an Internal exception error
Output from Debug -- I am not sure what the Cell in Red colour means, because the package is returning a correct message (before the red line).Can anyone help please??
Thanks
JS
......message: AJAX call returned server error ORA-20003: Customer has already been matched for Execute PL/SQL Code.
4
......is_internal_error: true
4
......apex_error_code: APEX.AJAX_SERVER_ERROR
4
......ora_sqlcode: -20003
4
......ora_sqlerrm: ORA-20003: Customer has already been matched
4
......error_backtrace: ORA-06512: at line 41 ORA-06512: at "SYS.DBMS_SYS_SQL", line 1926 ORA-06512: at "SYS.WWV_DBMS_SQL", line 973 ORA-06512: at "SYS.WWV_DBMS_SQL", line 999 ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_EXEC", line 830 ORA-06512: at "APEX_040200.WWV_FLOW_PLUGIN_UTIL", line 2304 ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_ACTION_NATIVE", line 442
4
......component.type: APEX_APPLICATION_PAGE_DA_ACTS
4
......component.id: 23185203797756209
4
......component.name: NATIVE_EXECUTE_PLSQL_CODE
4
...Execute Error Handling Callout defined on Page or Application Level
4
...Execute Statement: begin declare l_error wwv_flow_error_api.t_error; begin l_error := wwv_flow_error_api.g_error; wwv_flow_error_api.g_error_result := apx_error_utils.handleerror ( p_error => l_error ); end; end;
4
......Values changed by callout:
4
.........message: An unexpected internal application error has occurred. Please get in contact with your system administrator and provide reference# for further investigation.
4
.........display_location: ON_ERROR_PAGE
4
Stop APEX Engine detected
4
Final commit
4
1 - 59

Edit: Well, Patrick beat me to the punch because I was taking my jolly time writing this down
Well, if you look below the part you put in red, you can see that a callout is made: ...Execute Error Handling Callout defined on Page or Application Level
With directly below that:
......Values changed by callout:
4
.........message: An unexpected internal application error has occurred. Please get in contact with your system administrator and provide reference# for further investigation.
Since the plsql call is on the serverside, this error is trapped within the error handling function aswell. Your error has simply been obscured by it, and probably because it looks at the error backtrace and determines the error is internal.
Looking at the sample error handling code, this is probably where it goes "wrong":
-- If it's an internal error raised by APEX, like an invalid statement or
-- code which cannot be executed, the error text might contain security sensitive
-- information. To avoid this security problem rewrite the error to
-- a generic error message and log the original error message for further
-- investigation by the help desk.
if p_error.is_internal_error then
I recreated the situation here, and put some debug in the error handling function just so I could see what sort of error is being processed:
    apex_debug.message('error code: '||p_error.apex_error_code);
    apex_debug.message('sql code: '||p_error.ora_sqlcode);
    apex_debug.message('sql errm: '||p_error.ora_sqlerrm);
    apex_debug.message('error_backtrace: '||p_error.error_backtrace);
0.05750
0.00007
...Error data:
4
0.05757
0.00006
......message: AJAX call returned server error ORA-20099: raise application error for Execute PL/SQL Code.
4
0.05763
0.00006
......is_internal_error: true
4
0.05769
0.00005
......apex_error_code: APEX.AJAX_SERVER_ERROR
4
0.05774
0.00005
......ora_sqlcode: -20099
4
0.05779
0.00006
......ora_sqlerrm: ORA-20099: raise application error
4
0.05785
0.00005
......error_backtrace: ORA-06512: at line 1 ORA-06512: at "SYS.DBMS_SYS_SQL", line 1926 ORA-06512: at "SYS.WWV_DBMS_SQL", line 1064 ORA-06512: at "SYS.WWV_DBMS_SQL", line 1090 ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_EXEC", line 832 ORA-06512: at "APEX_040200.WWV_FLOW_PLUGIN_UTIL", line 2304 ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_ACTION_NATIVE", line 442
As you can see, the ajax error is an internal error, and that is why it is handled as such in the error handler. With this info you should be able to adjust your handling function. Test for the error code (APEX.AJAX_SERVER_ERROR) and then throw the error message or test for the -20000 range of custom errors for example.
    if p_error.is_internal_error then
        -- Access Denied errors raised by application or page authorization should
        -- still show up with the original error message
        -- do not parse ajax server errors here !
        if    p_error.apex_error_code <> 'APEX.AUTHORIZATION.ACCESS_DENIED'
          and p_error.apex_error_code not like 'APEX.SESSION_STATE.%'
          and p_error.apex_error_code != 'APEX.AJAX_SERVER_ERROR'
        then
It probably does need some more work but you should get the gist of it.

500 internal server error while deploying a Web Dynpro application

Hi
I got the 500 internal server error while deploying the application to server.
I tried to find the log file at usr --> SAP --> SID --> JC XX --> j2EE --> Cluster --> Server 0 --> log, but no log was there.
There were structure changes in the RFC and also code change in my Web
Dynpro code.
I´m working on EP 7.
NWDS version is 7.0.1
Please help me as the production move is pending because of this.
Regards
Vineet Vikram

Hi
Restarting the server does not help in my case.
I tried it several times.
I'm getting following error message in NWA>
Originated from: com.sapmarkets.bam.logcontroller.InvalidLogQuerySessionException: Invalid or expired log query session "1"
at com.sapmarkets.bam.logcontroller.jmx.LogControllerFacade.closeLogQuerySession(LogControllerFacade.java:356)
at sun.reflect.NativeMethodAccessorImpl.invoke0
Can you pl help on this.
Regards
Vineet Vikram

500 Internal Server error for WD applications

Dear All
I have a very strange situation and I don´t have any idea of what to do.
Basis took the backend R/3 system down for some reasons and made it up again after some time. But now they have locked all users in our backend R/3 system as Basis is performing some task on the server.
This has resulted in all web dynpro applications that are using RFC's throwing 500 Internal server error.
All other web dynpro applications that are not dependent on R3 system are working fine.
We also have restarted the EP server as we deployed one WD application.
I'm not sure how the situation was before the restart of EP server.
In NWA i can see many error for ACCESS.ERROR: Authorization check for caller assignment to J2EE security role service.jms.default.authorization : administrators referencing J2EE security role .
Also
application Processing HTTP request to servlet finished with error. The error is: com.sap.tc.webdynpro.services.exceptions.TypeNotFoundException: type is.eimskip.keywordsearchmodel.types.Zotkey could not be loaded: com.sap.dictionary.runtime.DdException: failed to create provider: User is locked. Please notify the person responsible
at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:250)
at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:213)
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:318)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:449)
at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:387)
at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:416)
at com.sap.tc.webdynpro.progmodel.context.MappingInfo.getDataNode(MappingInfo.java:83)
at com.sap.tc.webdynpro.progmodel.context.MappingInfo.initMapping(MappingInfo.java:125)
at com.sap.tc.webdynpro.progmodel.context.MappingInfo.init(MappingInfo.java:121)
at com.sap.tc.webdynpro.progmodel.context.MappedNodeInfo.doInit(MappedNodeInfo.java:215)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:449)
at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:387)
at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:416)
at com.sap.tc.webdynpro.progmodel.context.MappingInfo.getDataNode(MappingInfo.java:83)
at com.sap.tc.webdynpro.progmodel.context.MappingInfo.initMapping(MappingInfo.java:125)
at com.sap.tc.webdynpro.progmodel.context.MappingInfo.init(MappingInfo.java:121)
at com.sap.tc.webdynpro.progmodel.context.MappedNodeInfo.doInit(MappedNodeInfo.java:215)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.dictionary.runtime.DdException: failed to create provider: User is locked. Please notify the person responsible
at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:254)
at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:146)
at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:97)
at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:79)
at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:48)
at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:149)
at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:170)
at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
... 61 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedConstructorAccessor525.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:229)
... 68 more
Caused by: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: User is locked. Please notify the person responsible
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1015)
at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
at com.sap.dictionary.runtime.mdi.DataProvider.(DataProvider.java:123)
... 72 more
I believe that error will get resolved once the users are unlocked in R/3 system.
But the stituation is, we will get the system back on monday morning and I'll have no time to do anything as the business will be back in 1 hr when we get the system back.
Can you please help me to identify the tasks that I can perform and be sure that all will be normal on Monday (and I'll still be in job.)
Request your help and support.
Thanks
Vineet
Edited by: vineet vikram on Apr 19, 2008 12:41 PM

Hi vineet,
Check the following things:
(1) Specify the user names in Capital letters and try. This will help you. (this could be the problem)
(2) Test the RFC destination using the tCode SM59 and try to remote login from there.
(3) If the user is locked, you can unlock using the tCode SU01.
Regards
Vinod V

HTTP 500 internal server error while starting abap web dynpro application

Hi there,
i have some problems concerning my web dynpro abap configurations in the system. When i start an application the browser appears and displays the http 500 internal server error. The required icf nodes are activated, as far as i know. the following properties are set:
hostname: aet
port: 8000
The generated url for the web dynpro application looks as follows:
http://aet.ls3001:8000/sap/bc/webdynpro/sap/zwdr_test?sap-language=EN
Maybe anybody of you out there has an idea for that situation.
Thanks for your afford and kind regards,
Albert

Hi Ulli,
the error message says:
UNKNOWN HOST
Description: Unable to locate the server named "aet.ls3001" --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
So the problem is the hostname.
When i replace the hostname with the ip of the server, the following error occures:
COULD NOT CONNECT
Description: Could not connect to the server "10.18.187.9".
But with SAPLogon, its possible to connect on the server by filling in the ip adress.
Kind regards,
Albert

500 Internal Server Error while using BEx Web Application

Hello All,
Kindly help me in resolving below issue which is getting popped up for only few people, when they are clicking some of the MSS links.
500 Internal Server Error
Failed to process request;contact your system administrator
Error Summary
Exception occured while processing the current request;this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Cannot get connection for 60 seconds. Possible reasons: 1) Connection are cached within System Thread (can be any server service or code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPFactory" is not enough according to the current load of the system
Regards,
Ananda Swaroop

Hello Blanca,
As this is happening in our production system, Since sap note in your reply is very helpful, we are looking to implement in DEV,INT and then in production.
After testing, I will update result in this thread.
Thanks for your reply.
Regards,
Ananda Swaroop

500 Internal server error while deploying web applications in jdeveloper

I am getting the following error while trying to deploy my web application in Jdeveloper:
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response.
Please consult the application log for details.
Please help me.
Or where can i find the detailed log regarding this.
I even tried to remove the shared libraries / common logs/ set the development true in orion-web.xml file but to my disappointment..
Please help me !!!!
Regards,
Shaily

Thanks for ur help
Jdeveloper version is 10.1.3.2.0
I have deployed simple application.
I even went thru the log files located at :
$ORACLE_HOME/opmn/logs/default_group~oc4j_soa~default_group~1.log:
$ORACLE_HOME/j2ee/oc4j_soa//application-deployments/gateway/oc4j_soa_default_group_1/application.log
but it was not of any help.
Can you help me figure out where i can get the detailed log file. Very recently i have started using jdeveloper,so i am having difficulty figuring out the log also.

500 Internal Server Error when deploying struts application on OAS 10.1.3

I've installed the Oracle Application Server several times, this time with 10.1.3 our application doesn't run and we get the error shown below.
Any ideas? It looks to be something with struts or tiles. struts.jar and tiles.jar is included in our deployed j2ee application WEBI-INF/lib dir. The application was built with jdeveloper 10.1.2 and compiled with java 1.4.
We load a custom log4j.properties, and nothing is even getting logged except for the log4j init stuff, nor is this NoSuchMethod error showing up in any other of the many different log files. (That I can find anyway)
500 Internal Server Error
java.lang.NoSuchMethodError: org.apache.struts.tiles.DefinitionsUtil.populateDefinitionsFactoryConfig(Lorg/apache/struts/tiles/DefinitionsFactoryConfig;Ljavax/servlet/ServletConfig;)V
     at org.apache.struts.tiles.TilesPlugin.readFactoryConfig(TilesPlugin.java:267)
     at org.apache.struts.tiles.TilesPlugin.init(TilesPlugin.java:159)
     at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:1158)
     at org.apache.struts.action.ActionServlet.init(ActionServlet.java:473)
     at javax.servlet.GenericServlet.init(GenericServlet.java:256)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)

Figures, I've been fighting with this for the past day and a half and I figure it out shortly after I post the question.
It turns out the tiles.jar that was in our WEB-INF/lib directory was an old one. It looks like the newer struts.jar (from jdeveloper) we're using includes the tiles information. Once I removed tiles.jar, commons-dbcp, pool, resources, and services, it works now.
It looks like jdeveloper overwrites most of those files with it's built in struts integration, and we've just been lucky before that struts.jar was being loaded before tiles.jar and something with oas 10.1.3 is loading the jars in a different order--but I'm just guessing here.

Error 500--Internal Server Error - when deploying strust application

Hello everyone,
We have a large strust-based web application. The application is being deployed as an EAR file.
We are getting a NullPointerException when we deploy the application on Weblogic 8.1 in production mode. The exception
occurs when we access the application for the first time after redeployment.
When we restart the server entirely we do not get the exception anymore.
This exception does occur only rarely in development mode.
In production mode it occurrs every time.
Has anyone experienced similar issues?
Regards,
Oliver Enseling
Error 500--Internal Server Error
java.lang.NullPointerException
     at org.apache.struts.action.RequestProcessor.getServletContext(RequestProcessor.java:1136)
     at org.apache.struts.tiles.TilesRequestProcessor.processTilesDefinition(TilesRequestProcessor.java:180)
     at org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(TilesRequestProcessor.java:309)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1480)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:506)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at com.gelco.tmg.planning.web.core.action.URLSecurityFilter.doFilter(URLSecurityFilter.java:69)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6458)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

<[email protected]> wrote in message news:41c49d78$1@mail...
The problem seems to occur due to servlet reloading.... There seems to be
a bug that reloads the ActionServlet even without any changes made to the
code base... The reload fails for the ActionServlet making it null
Turn off servlet reloading in your weblogic.xml using
<container-descriptor>
<servlet-reload-check-secs>-1</servlet-reload-check-secs>
</container-descriptor>
Let me know if this helps ...The default is to check for every one sec... I am not sure whether these
kind of defaults make sense once a application is moved into production
mode...
If the issue gets resolved with the above suggested workaround .... let me
know... since the issue is spurious and I am trying to reach a higher
confidence level in the solution proposed by me.....
Thanks
Kumaraguruparan Karuppasamy
>
>
>
"Bill Turchin" <[email protected]> wrote in message
news:25319409.1102534305264.JavaMail.root@jserv5...
I am now also seeing that error having recently upgraded to WL 8.1. Has
anyone found the solution?

500 Internal Server Error on IBM AIX for Oracle Application Server 10g

Hi all,
I have installed Oracle AS 10g on IBM AIX 5.3.After installation everything was working fine.After some time when i was trying to access the emd console for deploying the application it gives me following error:w/o asking for user name(ias_admin) and password.
500 Internal Server Error
java.lang.NoClassDefFoundError: oracle/sysman/eml/app/Console at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java(Compiled Code)) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpApplication.loadServlet(HttpApplication.java:2283) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpApplication.findServlet(HttpApplication.java:4795) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code)) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java(Compiled Code)) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186) at java.lang.Thread.run(Thread.java:568)
Please help me out...
Thanks in advance

Hi,
I am facing the same problem as well. Below is part
of error captured from em-application.log:
08/07/22 17:02:59 Started
08/07/22 17:03:00 default: jsp: init
08/07/22 17:03:00 default: Started
08/07/22 17:03:04 emd: jsp: init
08/07/22 17:03:04 emd: dynamicImage: init
08/07/22 17:03:11 emd: Error initializing servlet
java.lang.InternalError: Can't connect to X11 window
server using '172.28.8.106:0.0' as the value of the
DISPLAY variable.
at
sun.awt.X11GraphicsEnvironment.initDisplay(Native
Method)
at
sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnv
ironment.java:175)
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java:180)
at
java.awt.GraphicsEnvironment.getLocalGraphicsEnvironme
nt(GraphicsEnvironment.java:91)
at
java.awt.Font.initializeFont(Font.java:333)
at java.awt.Font.<init>(Font.java:368)
at
oracle.sysman.eml.app.Console.<clinit>(Console.java:57
9)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java(Compiled
Code))
at
com.evermind.server.http.HttpApplication.loadServlet(H
ttpApplication.java:2283)
at
com.evermind.server.http.HttpApplication.findServlet(H
ttpApplication.java:4795)
at
com.evermind.server.http.HttpApplication.initPreloadSe
rvlets(HttpApplication.java:4889)
at
com.evermind.server.http.HttpApplication.initDynamic(H
ttpApplication.java:1015)
at
com.evermind.server.http.HttpApplication.<init>(HttpAp
plication.java:549)
at
com.evermind.server.Application.getHttpApplication(App
lication.java:890)
at
com.evermind.server.http.HttpServer.getHttpApplication
(HttpServer.java:707)
at
com.evermind.server.http.HttpSite.initApplications(Htt
pSite.java:625)
at
com.evermind.server.http.HttpSite.setConfig(HttpSite.j
ava:278)
at
com.evermind.server.http.HttpServer.setSites(HttpServe
r.java:278)
at
com.evermind.server.http.HttpServer.setConfig(HttpServ
er.java:179)
at
com.evermind.server.ApplicationServer.initializeHttp(A
pplicationServer.java:2394)
at
com.evermind.server.ApplicationServer.setConfig(Applic
ationServer.java:1551)
at
com.evermind.server.ApplicationServerLauncher.run(Appl
icationServerLauncher.java:92)
at java.lang.Thread.run(Thread.java:568)
17:03:11 emd: Error preloading servlet
avax.servlet.ServletException: Error initializing
servlet
at
com.evermind.server.http.HttpApplication.findServlet(H
ttpApplication.java:4846)
at
com.evermind.server.http.HttpApplication.initPreloadSe
rvlets(HttpApplication.java:4889)
at
com.evermind.server.http.HttpApplication.initDynamic(H
ttpApplication.java:1015)
at
com.evermind.server.http.HttpApplication.<init>(HttpAp
plication.java:549)
at
com.evermind.server.Application.getHttpApplication(App
lication.java:890)
at
com.evermind.server.http.HttpServer.getHttpApplication
(HttpServer.java:707)
at
com.evermind.server.http.HttpSite.initApplications(Htt
pSite.java:625)
at
com.evermind.server.http.HttpSite.setConfig(HttpSite.j
ava:278)
at
com.evermind.server.http.HttpServer.setSites(HttpServe
r.java:278)
at
com.evermind.server.http.HttpServer.setConfig(HttpServ
er.java:179)
at
com.evermind.server.ApplicationServer.initializeHttp(A
pplicationServer.java:2394)
at
com.evermind.server.ApplicationServer.setConfig(Applic
ationServer.java:1551)
at
com.evermind.server.ApplicationServerLauncher.run(Appl
icationServerLauncher.java:92)
at java.lang.Thread.run(Thread.java:568)
17:03:11 emd: redirect: init
8/07/22 17:03:11 emd: Started
08/07/22 17:03:11 cabo: jsp: init
08/07/22 17:03:11 cabo: Started
08/07/22 17:05:28 emd: Error initializing servlet
java.lang.NoClassDefFoundError:
oracle/sysman/eml/app/Console
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java(Compiled
Code))
at com.evermind[Oracle Application Server
Containers for J2EE 10g
(10.1.2.0.2)].server.http.HttpApplication.loadServlet
Http
Application.java:2283)
at com.evermind[Oracle Application Server
Containers for J2EE 10g
(10.1.2.0.2)].server.http.HttpApplication.findServlet
Http
Application.java:4795)
at com.evermind[Oracle Application Server
Containers for J2EE 10g
(10.1.2.0.2)].server.http.HttpApplication.getRequestD
spat
cher(HttpApplication.java:2821)
at com.evermind[Oracle Application Server
Containers for J2EE 10g
(10.1.2.0.2)].server.http.HttpRequestHandler.processR
ques
t(HttpRequestHandler.java:680)
at com.evermind[Oracle Application Server
Containers for J2EE 10g
(10.1.2.0.2)].server.http.HttpRequestHandler.run(Http
eque
stHandler.java:285)
at com.evermind[Oracle Application Server
Containers for J2EE 10g
(10.1.2.0.2)].server.http.HttpRequestHandler.run(Http
eque
stHandler.java:126)
at com.evermind[Oracle Application Server
Containers for J2EE 10g
(10.1.2.0.2)].util.ReleasableResourcePooledExecutor$M
Work
er.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:568)
17:05:28 emd: Servlet error
/b]
Could someone please help me take a look on this?
Thank you.
Regards,
HT
Hi,
I have got the solution........
go through the url:
http://docs.tpu.ru/docs/oracle/en/oas/10.1.2.0.2/aix.1012/relnotes.1012/relnotes/install.htm
Read these points:
Class Not Found Execption: 2.1.25
After doing all these four steps,restart your application server control.
Cause of this problem:
X Virtual Frame Buffer: 2.4.14
Cheers,

Internal Server error while launching applications in 11.5.10.1

HI,
Resently cloned dev instance from prod
All applications and db are up and running but fronend Login page is not comming getting Internal Server error
verified all access_log,error_log but not able to find any error message
Please suggest us to verify the above issue
application vertion is 11.5.10.1 and DB is 10.2.0.5 os is RHEL 5.5

Hi
Thank you very much for your reply,i renamed all access_log,error_log and error_log_pls files and restarted the applications and posting the fresh log file content.
vi error_log_pls.1310428800
[Tue Jul 12 12:58:40 2011] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
vi error_log.1310428800
[Tue Jul 12 12:58:39 2011] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
[Tue Jul 12 12:58:53 2011] [error] [client 10.37.1.48] mod_security: Access denied with code 400. Pattern match "!^([-_@|#!=A-Za-z0-9/ :.$]){0,255}([-_@|#!=A-Za-z0-9/ :.$]){0,255}$" at ARGS_NAMES. [hostname "cjb112vsa400.dresser.com"] [uri "/oprocmgr-service"] [unique_id Thv3tQolATAAAC1RD5k]
[Tue Jul 12 12:59:08 2011] [error] [client 10.37.1.48] mod_security: Access denied with code 400. Pattern match "!^([-_@|#!=A-Za-z0-9/ :.$]){0,255}([-_@|#!=A-Za-z0-9/ :.$]){0,255}$" at ARGS_NAMES. [hostname "cjb112vsa400.dresser.com"] [uri "/oprocmgr-service"] [unique_id Thv3xAolATAAAC1SD9M]
[Tue Jul 12 12:59:23 2011] [error] [client 10.37.1.48] mod_security: Access denied with code 400. Pattern match "!^([-_@|#!=A-Za-z0-9/ :.$]){0,255}([-_@|#!=A-Za-z0-9/ :.$]){0,255}$" at ARGS_NAMES. [hostname "cjb112vsa400.dresser.com"] [uri "/oprocmgr-service"] [unique_id Thv30wolATAAAC1dFKw]
[Tue Jul 12 12:59:38 2011] [error] [client 10.37.1.48] mod_security: Access denied with code 400. Pattern match "!^([-_@|#!=A-Za-z0-9/ :.$]){0,255}([-_@|#!=A-Za-z0-9/ :.$]){0,255}$" at ARGS_NAMES. [hostname "cjb112vsa400.dresser.com"] [uri "/oprocmgr-service"] [unique_id Thv34golATAAAC17F@A]
[Tue Jul 12 13:00:38 2011] [error] [client 10.37.1.48] mod_security: Access denied with code 400. Pattern match "!^([-_@|#!=A-Za-z0-9/ :.$]){0,255}([-_@|#!=A-Za-z0-9/ :.$]){0,255}$" at ARGS_NAMES. [hostname "cjb112vsa400.dresser.com"] [uri "/oprocmgr-service"] [unique_id Thv4HgolATAAAC18GBg]
[Tue Jul 12 13:01:38 2011] [error] [client 10.37.1.48] mod_security: Access denied with code 400. Pattern match "!^([-_@|#!=A-Za-z0-9/ :.$]){0,255}([-_@|#!=A-Za-z0-9/ :.$]){0,255}$" at ARGS_NAMES. [hostname "cjb112vsa400.dresser.com"] [uri "/oprocmgr-service"] [unique_id Thv4WgolATAAAC1RD5o]
vi access_log.1310428800
cjb112vsa400.dresser.com - - [12/Jul/2011:12:58:39 +0530] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19050 HTTP/1.1" 200 15 0
cjb112vsa400.dresser.com - - [12/Jul/2011:12:58:39 +0530] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=DiscoGroup&port=17050 HTTP/1.1" 200 15 0
cjb112vsa400.dresser.com - - [12/Jul/2011:12:58:39 +0530] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=OACoreGroup&port=16050 HTTP/1.1" 200 15 0
cjb112vsa400.dresser.com - - [12/Jul/2011:12:58:53 +0530] "POST /oprocmgr-service HTTP/1.1" 400 227 0
cjb112vsa400.dresser.com - - [12/Jul/2011:12:59:08 +0530] "POST /oprocmgr-service HTTP/1.1" 400 227 0
cjb112vsa400.dresser.com - - [12/Jul/2011:12:59:23 +0530] "POST /oprocmgr-service HTTP/1.1" 400 227 0
cjb112vsa400.dresser.com - - [12/Jul/2011:12:59:38 +0530] "POST /oprocmgr-service HTTP/1.1" 400 227 0
cjb112vsa400.dresser.com - - [12/Jul/2011:13:00:38 +0530] "POST /oprocmgr-service HTTP/1.1" 400 227 0
cjb112vsa400.dresser.com - - [12/Jul/2011:13:01:38 +0530] "POST /oprocmgr-service HTTP/1.1" 400 227 0
cjb112vsa400.dresser.com - - [12/Jul/2011:13:02:38 +0530] "POST /oprocmgr-service HTTP/1.1" 400 227 0
Also adcgfclone.pl and auto config completed successfully while doing cloning nothing issues
adapcctl.sh is also showing as fallows:
adapcctl.sh version 115.55
Apache Web Server Listener :httpd ( pid 11444 ) is running.
Apache Web Server Listener (PLSQL) :httpd ( pid 11488 ) is running.
adapcctl.sh: exiting with status 0
in alert log file we did not see any errors.Please help us on the same

500 INternal server error on making ajax call to method of Application page

HI
I have a application page that have a method in code behond ..i need to call this method on usercontrol using jquey on client side..when i ma makeing the call to method using $.Ajax({definiotion});
then it gives me error 500 internal server error and this is coming only with the case when i am passing parameter to method usig javascript var object
help me out on this... if required i wll upload the code also..
regards
Piyush
piyush mishra

This forum is for customization and programming of Microsoft Project - the project management scheduling product.
A quick search turned up:
https://forum.jquery.com/
I'd try there.

Internal Application Error

Similar Messages

Maybe you are looking for