Internal Optical Drive not recognized after trying to Bootcamp

Around 3 months ago I tried boot camping my Macbook with Windows 7 but it ended up freezing and I had to restart my computer. When the computer had fully restarted I found that a few things had changed. First, I now had a 70 GB partition called BOOTCAMP but it was basically unusable since the Windows 7 OS was never installed in the partition, and second the Optical Drive wasn't recognized by my computer anymore so it won't work at all and the Windows 7 CD is now stuck in there.
I tried a lot of different ways that I found on the internet to try to eject the CD but nothing has worked. It's not really a huge deal since CDs are starting to become the new floppy disks but it would still be nice to have this working again.
Also, here's the original post that I made back in December. It never got any replies and somehow got moved but I was never able to see where it got moved because whenever I clicked "discussion" in "Branched to a new discussion." I would get a page that said this - "Unauthorized. Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here." I know the whole post is pretty long so I have a TLDR; at the end of it and I pretty much summarized the problem again at the top of this whole post.
Alright so earlier today I decided to Bootcamp my Macbook and install Windows 7 with a 70GB partition. I was using https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2 and http://www.howtogeek.com/186907/how-to-install-windows-on-a-mac-with-boot-camp/ to help guide me through the process. Everything was running smoothly at first...I had a 32GB memory stick that I used to load the support software onto and I had a Windows 7 Ultimate 64-bit DVD in my disk drive.
The first problem I ran into was when Bootcamp wanted to download the files onto the memory stick - it wanted me to format the stick. So I went into Disk Utility, clicked on it, went to erase, then formatted it to the same format it was (because it was already FAT) and then it all worked. After getting the support software onto the memory stick the next step was to partition my disk. After doing a TON of research I finally decided that 70GB would be enough for the OS, a game or two, Sony Vegas Pro, and a few small programs. So I dragged the thing to give the new partition 70 GB and pressed install.
Then, the next problem occurred - a message popped up saying "The USB drive connected to this Mac contains a bootable volume. In order to install Windows 7 from the DVD, the Boot Camp Assistant needs to disable this functionality. No information on the drive will be removed, do you want to continue?" I was hesitant at this point to do anything so I googled it and couldn't find much except this thread - Bootable volume on USB flash drive in boot camp. I decided to try it and press continue since according to the thread it would stop me if there was a problem. Once I did I THINK (I can't remember that it did for sure or not) it dismounted the memory stick, which I remember thinking was okay because I could just unplug it and plug it back in after Windows 7 was installed to install the support software (Also, I NEVER removed the memory stick until after a reboot later on). After that Bootcamp began partitioning my hard drive.
About an hour later the blue progress bar had actually filled up to at least 99% (but it looked like 100% to me) but Bootcamp still said "Status: Partitioning Disk" so I left it alone for another 1-2 hours. After that I started getting worried and googled how long this process was supposed to take and found out that this step normally only took a few minutes for most people. At this point I started looking up fixes for this but nothing matched my problem since Bootcamp itself wasn't actually frozen (when I clicked and held on the icon it didn't say "Application not responding") so I decided to check to see if the partition had worked. Then, Disk Utility froze like a few seconds after opening it up so I had to force quit that. My next option was to check under "Storage" in "About this mac" so I tried that and it froze as well. While all this was going on I kept checking back to Bootcamp and it never froze.
Now I was getting extremely worried and with no solutions on Google and no idea what to do I decided to just try and restart my computer and pray to god that it would reboot fine. Luckily, it did...for the most part. After rebooting all my applications seemed to be working fine (I can confirm that Terminal, Disk Utility, System Preferences, System Information, and Safari are all working or at least loading). I also had all my files still on my computer so that was good. Next, I checked Disk Utility to see if the partition had actually worked and it did, or at least it is showing up as "BOOTCAMP" under my main hard drive. Then, I tried using Bootcamp again and this is when I noticed something new - a warning on Bootcamp's first page that wasn't there before, "You need an optical drive to install Windows. Connect an optical drive to your computer. You cannot install Windows with a remote optical drive." I can't guarantee that it wasn't there the first time but I really don't remember it there. After reading that I checked my Desktop for the mounted Windows 7 Ultimate 64-bit DVD and it wasn't there. Then, I checked Disk Utility and it wasn't showing up there either. The only things I can see on Disk Utility are my main hard drive with both partitions, my memory stick, and a random dmg file called decryptedFile.dmg (the size of this file is only 15.6mb so I don't think it could be the OS DVD).
So now I am trying to figure out how to get my computer to recognize that it does have an internal optical drive and that there is a DVD inside of it. I looked around on Google to try to find answers but all the regular options to fix this don't work since the computer itself is not realizing it's there. I don't know if this helps to prove that it doesn't realize this but I checked in System Information -> Hardware -> Disk Burning and it says "No disk burning device was found. If the device is external, make sure it's connected and turned on." And since a "Superdrive" can read disks I'm assuming it can burn them to and would be shown under that. (I don't know that much about computers though so I could easily be wrong)
Anyways, sorry for the extreme detail that I went into but I wanted to get as much information about what happened as I possibly could. For those of you who don't have time to read all that I'll put a little summary.
TLDR; Basically, I tried to Bootcamp my Macbook to run Windows 7 Ultimate 64-bit. I ran into a few problems and then Bootcamp wouldn't move on from "Status: Partitioning Disk" so I had to restart my computer. After the restart my Macbook doesn't recognize that it has an internal Superdrive and therefore doesn't realize that there's a Windows 7 Ultimate DVD disk in it. I looked around for answers but none of the simple ones (using key commands on the keyboard and typing something into terminal) worked. Now I'm looking for help to get my computer to realize that it does have a Superdrive inside so I can get the disk out.
Thanks in advanced! If any more information is required to help please let me know so I can find it. Also, this is a Mid-2010 White Unibody Macbook.

Hello Michael Dixon2,
Thanks for using Apple Support Communities.
In order to troubleshoot this issue where the optical drive does not accept discs, please follow the steps below.
Doesn't accept discs
Be sure to check your disc to make sure it is flat. You can check this by putting the disc upside-down on a flat surface. If the disc is bowed up on any side or in the center, do not use the disc because it might get stuck in the drive. Do not use discs that have anything attached to them or dangling from them (such as "sweeper" or cleaning discs).
If the drive struggles when you put in a disc or stops part-way, carefully look at the disc for labels that may be interfering. If there aren't any raised labels then try putting the disc in a few more times.
Try another disc to see if the issue is being caused by a specific disc.
Make sure you insert the disc far enough for the drive mechanism to activate. You need to insert discs nearly all the way before the drive will activate and pull them in. If you don't completely insert a disc, the drive will reverse and push the disc back out.
Allow the drive one or two seconds to accept the disc while it is fully inserted.
Reset the System Management Controller (SMC).
If the drive repeatedly does not accept discs, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
Apple Computers: Troubleshooting the slot-loading SuperDrive - Apple Support
Cheers,
Alex H.

Similar Messages

External Optical Drive Not Recognized

I've been using a Pioneer DVR111 external firewire drive for the last few months. Until tonight it's performed flawlessly.
I ripped a couple of CDs into iTunes tonight, then when I tried to do another it wouldn't work. The CD wouldn't mount and the drive wasn't recognized by system profiler. I hear the drive spin up when the disc is inserted, but that's about it.
I then tried the disc in the internal drive. Also no response.
So I shut the computer down, unplugged everything and waited a few minutes. I think this is called resetting the PRAM or something like that.
I rebooted from the install disc and rann hardware test. Passed without problem.
I rebooted again and everything seemed fine. Both optical drives were recognized in Profiler.
However, when I inserted a disc in the external drive, it again wasn't recognized. And when I rechecked Profiler, the drive had disappeared. The internal drive, however, seems to have remained okay.
Does anyone have any idea what's going on here? Might this be caused by a faulty external drive, or something else? The external was working fine a couple of hours ago, and I'm a little bit spooked that my internal was acting oddly for a time.
Thanks in advance for the help.
ron
iMac Intel Duo Core Mac OS X (10.4.8)

Can you be more specific about "Arch Linux don't recognized it"?
Post the output of lsusb and dmesg.
Do you have an internal optical drive? If not, what's the output of 'cat /proc/sys/dev/cdrom/info'?

Optical drive not recognized in system profile after hardware rebuild

This is an old MacBook Pro. Apple call it vintage.
Logic board died, so rather than consign it being a doorstop, I took out the logic board and "cooked" it to reflow the solder. It actually worked!
Just prior to this and just before the logic board completely bit the dust I'd inserted a DVD into the optical drive, where it sat and didn't read, wasn't recognized etc. I was trying to drop back down in OS as Lion was too resource hungry for the old machine, so it was an OS install disk. Panther I think?
So now I've got the logic board working, but I cannot remove the DVD. I tried all the tricks, including Terminal etc. On checking System Profile I noticed that the optical drive isn't even listed now. So my question is, is it possible I missed a connection etc when rebuilding the MBP after replacing the logic board? If so, thoughts on where I should look? Is there a way to "force" the OS to find the optical drive? Any thoughts on what to do?
I can't pull the optical drive as one of the screws is completely stripped and honestly, not sure if the laptop is even worth the cost of a replacement drive anyway.

Ok, that's it. I read a few posts in the "...SuperDrive won't accept my CD.." section. and it seems some people are just swapping optical drives like mad, ready to accept that the kit is crap, and "...oh, well, I sure hope this one works better...".
But one guy had the brains to have a look inside. Turns out dust had accumulated in the drive and on the connectors, and when he cleaned them, and unplugged and replugged them, it worked fine. So that's what I did. Took it out and put it back in. Amazing the stuff I cleared out! I also un- and re-plugged the power cable and the data ribbon at the mutha board and bingo!. We have disk, and I can breathe again.
Recommend to others they pretend they've bought a new drive, do a remove and reinstall and be very fastidious. You may not need a new one after all. I just love it that stuff can still be FIXED!
Thanks to Lou and all of you who share your experiences. It's like my brain is suddenly soooo huge...

New internal hard drive not recognized at all!

Hello everybody!
I really need your help. I tried to upgrade my internal 120gb drive to a Western Digital wd2500bevs. But when I start my Macbook with the Leopard DVD neither the System Profiler nor the Disk Utilities Program recognize the drive for a possible installation. When I reinstall the old drive everything is back to normal and works perfectly.
This is what I already tried to fix the problem:
I took the drive into an external casing => it was recognized immediately
I then formatted it => no change after installing it into the Macbook again.
I cloned my system with CCC on the WD and then installed it => no system found.
I have another disk of this kind but the same problem and another 160gb Toshiba disk which is not recognized as well.
Please help me! I couldn't find help in German discussions yet so I hope anyone of you guys can help me.

You say the drive is "recognized" but your original post stated it was not present in Disk Utility. I'm puzzled. Have you attempted to partition and format the drive?
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.

A105-S4384 DVD drive not recognized after replacement.

I've seen the posts about deleting the filters from the registry on upgrade to Vista. That doesn't help my case.
I replaced the stock Mat**bleep**a drive when it stopped reading any type of disc. The replacement is a Toshiba TS-L632, which was sold as a compatible drive.
What I see is that in the BIOS, the drive is not recognized as Optical Drive, but on the Boot tab, the drive DOES show up as a boot option "TSST-L632H-..."
I do not see a CD/DVD drive option at all in the Windows Hardware Manager (ie. it isn't a matter of seeing an exclamation mark over the drive... it isn't there at all).
If I insert a disc, I hear the drive rev up and spin, but nada afterwards. There is no light active on the drive. Trying to install the L632's firmware is no good, as the installer just pops up a dialogue with "Drive not found!!" message.
I'm at wit's end. The Toshiba site isn't helpful in confirming the compatibility of the drive, but you'd hope that if they make laptops and laptop drives, they'd be compatible.

Although the drive shows up in the boot menu, can you actually boot from it?
Some Toshiba laptops needed the drives to be in CS (cable select) mode in order for them to function properly with the laptop. This can be done on an after-market drive by shorting two pins on the connector (and I have done it before, so it does work), but that may or may not be the problem. But the computer I had to do it to was quite a bit older than yours (M10-something).

IMac G5 Internal Hard Drive Not Recognized

I shut down my iMac G5 with the power button and not through the typical shutdown procedure once and then when it booted up it would not get past the gray screen. I eventually used the Leopard DVD to try to boot it and was able to get to disk utility to look at the drive. I tried to repair the drive but then the machine froze and I had to restart once more. Now the internal hard drive isn't recognized or seen at all. I actually switched out the SATA hard drive with another spare I had and that was not recognized either. I can get the mac to recognize the installation DVD still so I know my computer still functions properly but I just need it to recognize the drive now. Does anyone have any ideas how to resolve this?

Have you access to DiskWarrior or TechToolPro? Either of those might fix your problem otherwise, try booting from the Apple Hardware Test on your install disc and see what it says.

New Optical Drive, Not Recognized

New optical drive replaced in a Satellite 5205-S503. The previous drive was recognized, powered up, but recently played nothing. I replaced it with another TEAC DW-224E. This drive powers up when I place a CD in it, but is not being recognized. I did not think I needed drivers because I am using Windows XP Pro. Because it is clearly powering up and spinning a disc, I am assuming that it has been connected properly internally.
Help!

Satellite 5205-S503
Did you follow instructions like those here?
How to remove and replace laptop DVD/CD-rom drive
Open Device Manager and expand DVD/CD-ROM drives. Can you see the drive there? If so, right-click it and click Uninstall. Reboot to reinstall the driver.
-Jerry

Optical drive not recognized HP DV9910us

This problem has been driving me nuts!! It's a pioneer dr-kd08hb on hp dv9000.
The optical drive dissapeard from my laptop a few months ago. It opens, has power,spins for a bit, but does not read ANY disc.It does not appear in "computer" or "device manger".Only when i click "show hidden" it's there, but there is a message stating that the device is unplugged.
Once in while it would show up then dissapear again. I pulled it out, cleaned the contacts, and still same deal. Come and go.
I had a HD crash, and LUCKILY it worked in time to install windows 7.Right after that it worked for a few days and i thought the problem was solved...... Nope. Vanished again and not coming back!
I deleted upper and lower filters...No go
Unistalled the driver and reinstalled...No go.
Tried "FIX YA"....nothing
Bought a NEW optical drive and it does the same thing.
I'm on my last leg here, and thinking about replacing the optical drive circuit board if not the MOBO itself since i am CONVINCED it's not a software issue anymore.
I've searched the internet high and low for a solution, but have not found a fix that works for my case.

Very common...having a similar issue on a dv9812us. My optical drive works with the BIOS (spins, light flashes, opens by pushing the button) but disappears entirely once windows boots. Not in device manager, not in the computer menu. Mind doesn't even show up when I select "view hidden."

Optical drive not recognized

Ok - I'm trying to work out what the heck has gone wrong with my optical drive.
I think it started from when i updated from 10.5.8 to 10.9.
I had been having trouble reading any disks at all and sat down to try and fix it, when I looked more into it i noticed a few errors that kept popping up.
When I insert any disk it reads for a bit and then just ejects. When i try and look for the disk utility there is no optical drive there.
When i open CDs and DVDs "You can’t open the “CDs & DVDs” preferences pane because it is not available to you at this time. To see this preferences pane, you may need to connect a device to your computer."
In system information - disk burning it says "No disc burning device was found. If the device is external, make sure it’s connected and turned on."
When inserting a movie DVD and opening DVD player
"A valid DVD drive could not be found [-70012]
After inserting a DVD it didn't come out. so there is a dvd stuck in there now.... "sigh"...
got an imac 27" early 2009 with 2.66ghz 8gb ram and 10.9.4osx
HELP!

YYour drive is probably dead and needs replaced. To get the stuck disk out try restarting while holding the mouse button, if that doesn't work open Terminal and type drutil eject

Slot loading optical drive not recognized.

Recently I replaced a none functioning optical drive in my 15" 1.67 HS PB with 2.0g ram 160hdd. On reboot it will show a grey screen or a ? folder. I have tried everything ( and I mean everything) 2x over. This is what I find:
1) The PB will boot up fine if only either the od or the hdd is connected to the mother board. But not with both drive connected.
2) The PB will boot up with an external PB2 in target disk mode with only the od drive connected. I mentioned this because this allow me to use apple HW test that described the hdd as ID-0.
3) The od is a UJ85J-B panasonic/masushita from owc. Exchanged x2 thinking its defective.
I believe this is a master/slave issue. my question is will the following article apply to my situation.
http://www.xlr8yourmac.com/tips/PioneerK04L_mastermod.html
Is ther anything else I can do or use the od as an external?
Will very much appreciate any in put.
PB 15" 1.67ghz 2.0g ram 160 hdd Mac OS X (10.4.8)

We have 3 right now having problems. 1 just went into the ITech store to have a CD removed. 1 will not even accept a CD anymore and the other just makes awful noises and scratches the CD. These have been minimally used also. They said the Optical Drive is bad on the 1st one. Of course, we are 1 month past our warranty! I think Apple should be backing this but when I called about it they didn't want to help me. Even saying I had not registered them even though I had documentation from them saying I had. I know the feeling of being ripped off. Our company has purchased 20 of these in the last 1 1/2 years. You think we would get a little bit of help from Apple being we have purchased so many of their products in the last 20 years.

Optical drive not recognized as an ATA device in Apple profiler

The dvd drive is not recognized any more in Apple Profiler (nothing under ATA) and the CD or DVD are not recognised neither. I can hear the drive is working but that's it. The problem happened just after I upgraded to 10.4.10. Any help would be welcome!

You will want to ensure your USB DVDRW drive is properly connected to the Windows 8 VM in question.
To check this you will want to use the Vmware vSphere client to connect to your Vmware ESX/ESXi host.
Next, you will want to edit the settings for your Windows 8 virtual machine and check that you have added a USB controller and then connected the USB device to the controller. This is a manual assignment. If your DVDRW drive you wish to connect is actually
connected via SATA on the motherboard of the host then you will want to go through the same process to ensure the CD/DVD drive of the host has 'connected' and 'connect at power on' selected under settings.
Below is a screenshot of what you should see:

DVD drive not recognized after Security update

Hello -
Well, for whatever reason I decided to apply some Apple software updates today. I repaired permissions, did a back up to an external Firewire drive with SuperDuper and downloaded several packages - iDVD 6.0.2, iMovie 6.0.2, Quicktime 7.1, iPhoto 6.0.3, iWeb 1.1, and Security Update 2006-003. I installed the Security Update and rebooted. I had read about an issue with DVDs, so promptly inserted a DVD-R disc of mine with a movie on it (not a commercial DVD, footage I had shot on my own). It was not recognized. I restarted with the mouse button held, no luck. I repaired permissions, no change.
I restarted from the backup on the external drive and cloned the backup over to my Powerbook. The problem did not go away, there the DVD sits, unrecognized. Tried to see if DVD player would see the DVD, got a message "There was an initialization error. A valid DVD drive could not be found [-70012]" disc burning in System profiler says no burning device was found. Tried to re-install DVD player via 4.6.1 update, got a message "Compatible DVD hardware was not detected, installation will not proceed".
Where to next? I haven't booted into open firmware to try to eject the disk that way, but one post on the discussions here somewhere had no luck. I'd really rather not erase and re-install and migrate from my back-up, but if that is all that's left, ok. Thanks for your help.
BTW, 10.4.6 ona 1.5 GHz Al PowerBook with 2GB RAM, not original RAM but Samsung from OWC. Thanks again.

Well, one thing I had not tried was to reset PRAM//NVRAM. I combined that step with shutting down, unplugging the power cord and letting it sit for 15 minutes. Reconnected power, restarted while holding cmd-option-P-R through the second start-up chime, and viola, my DVD appears on the desktop, the drive is listing in the system profiler, problem gone. Thanks all for the rapid responses.
Darth

Macbook Pro, MacOS 10.7.5, Internal CD Drive not Recognized on Mac side, DOES work on Parallels (Win7) side

2011 Macbook Pro, running MacOS 10.7.5, Internal CD Drive Matshita DVD-R, UJ-8A8 (firmware HB14), doesn't recognize drive when insert CD. See lots of issues on board about this, haven't seen good resolution yet.
Another clue perhaps... I'm also running Parallels (Build 9.0.24172), with Windows 7 Home Premium (service pack 1 installed), drive recognized and works just fine on the Windows 7 side of the system, which means I can at least load up photos, videos from CDs, drag them over to Mac side, but cannot install Mac software because it won't recognize the drive.
Suggestions?

You're welcome. I know, it's confusing the first time you encounter it. On an external drive, it'll ask you which OS you want to connect to. I think there's something in Parallels settings for the internal drive, but not sure.

2nd cd/dvd drive not recognized after security update 2014-002

I have a 3rd party CD/DVD drive as my 2nd drive in my Mac Pro and after installing security update 2014-002 it is not recognized by the computer. It does not even show up under "About This Mac" or as a drive in disk utility. Worked fine up until this update. Any ideas?
Thanks

I think I have solved my own problem. After 'restarting' the computer several times with no effect I turned the computer off and let it set for 15 minutes, not that I think the time period had anything to do with it, but upon turning the computer back on the 2nd CD worked fine. I'm sure you folks who are wizards in this can explain why turning the computer off did what restarting did not.

Optical Drive not recognized by Windows 7

I have a Satellite A305-S6857 that I upgraded to Windows 7 and the BIOS shows that I have an optical drive but Windows doesn't. I've tried deleting filters in regedit, didn't work. I unchecked "hide empty drives" in the view options. I don't what to do. Please help.

I had the same issue before. Was able to fix it by loading the BIOS default setting. You can also try to uninstall it on Device Manager.

Internal Optical Drive not recognized after trying to Bootcamp

Similar Messages

Maybe you are looking for