Internal Table Comparision

Hi,
I have two internal tables both have them large no of records.
For ex: it_large this table has about 150,00-200,00 records on average. It has 3 fields item_id, text and type.
and it_small this tables has about 60,000-80,000 records on average. Just has one field item_id.
I want to find records from it_large which are not contained in it_small.
What is the best way to do so?
I currently use following logic:
loop at it_large assingning <ls_large>.
read table it_small assigning <ls_small> with table key item_id = <ls_large>-item_id.
if sy-subrc <> 0.
* populate missing items internal table
end f.
endloop.
Thanks in advance,
CD

Thanks Ramiro for the reply, I'll give it a try too.
I was thinking about this logic below, but dont know if it is recommended in ABAP. I've used something similar with arrays in Java.
*both tables lt_small and lt_large are sorted with no duplicates.
*lt_small has just one field item_id.
*lt_large has 3 fields item_id, type and text
DATA: lv_len1 TYPE i.
DATA: lv_len2 TYPE i.
DESCRIBE TABLE lt_small LINES lv_len1.
lv_len2 = 1.
WHILE lv_len2 LE lv_len1.
READ TABLE lt_small ASSIGNING <ls_small> INDEX lv_len2.
READ TABLE lt_large ASSIGNING <ls_large> WITH KEY barcode = <ls_small>-item_id BINARY SEARCH.
IF sy-subrc EQ 0.
 DELETE lt_large INDEX sy-tabix.
 DELETE lt_small INDEX lv_len2.
 lv_len1 = lv_len1 - 1.
 lv_len2 = lv_len2 - 1.
ENDIF.
lv_len2 = lv_len2 + 1.
ENDWHILE.
I am yet to try this code, I feel advantage is loop is thru lt_small as opposed to lt_large and also loop lenght is dynamic.
At the end of the loop lt_large is what I need.
Please advice me this approach is recommended..
Regards,
CD

Similar Messages

Problem in Internal table Record Splitting

Hi All,
Plz look into my below requirement and me know your Suggestions.
My Internal tables :
1.*Internal table for Infotype 2002 (Attendances)
DATA : BEGIN OF T_PA2002 OCCURS 0,
       PERNR LIKE PA2002-PERNR,
       BEGDA LIKE PA2002-BEGDA,
       ENDDA LIKE PA2002-ENDDA,
       BEGUZ LIKE PA2002-BEGUZ,
       ENDUZ LIKE PA2002-ENDUZ,
       SUBTY LIKE PA2002-SUBTY,
       END OF T_PA2002.
1.*Internal table for Infotype 9003 (Custom Attendances)
DATA : BEGIN OF T_PA9003HRABS OCCURS 0,
       PERNR LIKE PA9003-PERNR,
       BEGDA LIKE PA9003-BEGDA,
       ENDDA LIKE PA9003-ENDDA,
       SHIFT LIKE PA9003-SHIFT,
       OTHOURS LIKE PA9003-OTHOURS,
       BEGUZ LIKE PA2002-BEGUZ,
       ENDUZ LIKE PA2002-ENDUZ,
       NSA LIKE PA9003-NSA,
       MA LIKE PA9003-MA,
       CA LIKE PA9003-CA,
       END OF T_PA9003HRABS.
Requirement :
1. Internal table T_PA2002
    PERNR     BEGDA          ENDDA          BEGUZ          ENDUZ
     5          27.12.2006     27.12.2006     10:00:00     14:30:00
2. Internal table T_PA9003HRABS
    PERNR     BEGDA          ENDDA          BEGUZ          ENDUZ          HRABS     OTHOURS     MA     CA     WA
     5          27.12.2006     27.12.2006     08:00:00     14:30:00     2     2
Iam doing comparision between T_PA2002 and T_PA9003HRABS.
Iam doing some caluculation to get Hourly absence,OT Hours and else ( Fields)
So my Hourly absence on 27.12.2006 was 2Hours.
So i need to split my Final table as below how to do that....( It is like In infotypes COPY option i.e 1 record to 3 Record )
I need the Output like this...
3. Final Internal table T_PA9003HRABS
    PERNR     BEGDA          ENDDA          BEGUZ          ENDUZ          HRABS     OTHOURS     MA     CA     WA
     5          25.12.2006     26.12.2006     08:00:00     14:30:00     0     0
     5          27.12.2006     27.12.2006     08:00:00     14:30:00     2     2
     5          25.12.2006     26.12.2006     08:00:00     14:30:00     0     0
Points will be rewarded.
Thanks,
Suresh.U

you could:
sort T_PA2002 by pernr.
sort T_PA9003HRABS by pernr.
loop at T_PA2002
read table T_PA9003HRABS with key
pernr = T_PA2002-pernr
begda = T_PA2002-begda
binary search.
***here you can specify how you calculate
***your absences and apply them to your
***final internal table.
endloop.
hope this helps.
Warren

Passing of internal table values to the select statement as SETS

Hi All,
Is there any way that i can restrict the values of a internal table to be passed to a select statement set by set..
say for eg: if a itab has 1000 entries i want the first 500 to be going out in a select statement as a comparision for all entries and then the next set of 500 to go out..
Please let me know.. this is very urgent..

Appending Several Lines
You can also append internal tables to index tables using the following statement:
APPEND LINES OF <itab1> TO <itab2>.
This statement appends the whole of ITAB1 to ITAB2. ITAB1 can be any type of table, but its line type must be convertible into the line type of ITAB2.
When you append an index table to another index table, you can specify the lines to be appended as follows:
APPEND LINES OF <itab1> [FROM <n1>] [TO <n 2>] TO <itab2>.
<n 1 > and <n 2 > specify the indexes of the first and last lines of ITAB1 that you want to append to ITAB2.
This method of appending lines of one table to another is about 3 to 4 times faster than appending them line by line in a loop. After the APPEND statement, the system field SY-TABIX contains the index of the last line appended. When you append several lines to a sorted table, you must respect the unique key (if defined), and not violate the sort order. Otherwise, a runtime error will occur.
Then u can use FOR ALL ENTRIES in select query.
regards
vinod

Internal table - select if in range ?

Hello ABAP Experts,
I have a internal i_gl_account table which has some of the following fields:
glacctfrom, glacctto, flag
i have to select a record from this internal table based on a fixed gl_account_fix.
i cannot write this statement
read table i_gl_account with key
 glacctfrom >= gl_account_fix
 glacctto <= gl_account_fix
since read does not allow the '>' or '<' operators.
one alternative possible is:
loop i_gl_account.
if ( glacctfrom >= gl_account_fix and
 glacctto <= gl_account_fix).
exit.
endif.
endloop.
This solutions, lookups at each and every record one by one and then does the if comparisions. Incase the i_gl_account is large then this is huge cost and processing.
wondering if there is any other possible method of achieving the same with lesser processing and cost.
Any suggetions are appreciated.
Thanks,
BWer

You could also something simular to this sample program. If know that the start point is in the table. Here the program is reading the first line where the start value is =, then it is reading each line after that untill it reaches the end point. But it is not reading the entire internal table.
report zrich_0001.
data: begin of itab occurs 0,
 field1(10) type c,
 field2(10) type c,
 field3(10) type c,
 end of itab.
itab-field1 = 'A'.
itab-field2 = '1'.
itab-field3 = '001'.
append itab.
itab-field1 = 'A'.
itab-field2 = '2'.
itab-field3 = '123'.
append itab.
itab-field1 = 'A'.
itab-field2 = '3'.
itab-field3 = '124'.
append itab.
itab-field1 = 'A'.
itab-field2 = '4'.
itab-field3 = '125'.
append itab.
itab-field1 = 'A'.
itab-field2 = '5'.
itab-field3 = '999'.
append itab.
sort itab ascending by field1 field2 field3.
data: index type sy-index.
data: start like itab-field3 value '123'.
data: end like itab-field3 value '125'.
read table itab with key field3 = start.
if sy-subrc = 0.
write:/ itab-field1, itab-field2, itab-field3.
index = sy-tabix + 1.
while sy-subrc = 0.
 read table itab index index.
 if sy-subrc = 0
 and itab-field3 <= end.
 write:/ itab-field1, itab-field2, itab-field3.
 else.
 sy-subrc = 4.
 endif.
 index = index + 1.
endwhile.
endif.
Regards,
Rich Heilman

Duplicate Entries in Internal Tables

Hallo Friends,
It Would be nice if some one let me know, if there is a way in ABAP to select the duplicates records in an internal tables.
Lets say I have two internal tabels, itabA have following structure:
BNAME |          WORKAREA   |   ROLES
abc |             wa1 |          ro1
cde |            wa1 |          ro1
cde |      wa3 |          rol..
abc |      wa2 |          rol2
xyz |       wa1 |          rol3
xyz |      wa3 |         rol2..
the itabB have the following structure:
WORKAREA |      ROLES|
wa1   |         rol1
wa2 |        rol1
wa3 |          rol1
wa4 |          rol1
Now problem is, I need to select the common WorkAreas from itabA ( which is commom in all BNAME ) in above example it will be workarea wa1. as it is commom in all i.e ( abc ,cde and xyz). I need to select this commom workarea, and then mark it with some flage in itabB ( to display that this workarea is common among the users...)
Would be nice if some one let me know, is there any way I can select the duplicate rows in an internal table or I have to go one by one and then do some kind of comparision.
Many thanks,
Thx in advance....
Haider

Hi marek,
below information might help you.
The first criterion for comparing internal tables is the number of lines they contain. The more lines an internal table contains, the larger it is. If two internal tables contain the same number of lines, they are compared line by line, component by component. If components of the table lines are themselves internal tables, they are compared recursively. If you are testing internal tables for anything other than equality, the comparison stops when it reaches the first pair of components that are unequal, and returns the corresponding result.
DATA: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA: ITAB LIKE TABLE OF LINE,
JTAB LIKE TABLE OF LINE.
DO 3 TIMES.
LINE-COL1 = SY-INDEX.
LINE-COL2 = SY-INDEX ** 2.
APPEND LINE TO ITAB.
ENDDO.
MOVE ITAB TO JTAB.
LINE-COL1 = 10. LINE-COL2 = 20.
APPEND LINE TO ITAB.
IF ITAB GT JTAB.
WRITE / 'ITAB GT JTAB'.
ENDIF.
APPEND LINE TO JTAB.
IF ITAB EQ JTAB.
WRITE / 'ITAB EQ JTAB'.
ENDIF.
LINE-COL1 = 30. LINE-COL2 = 80.
APPEND LINE TO ITAB.
IF JTAB LE ITAB.
WRITE / 'JTAB LE ITAB'.
ENDIF.
LINE-COL1 = 50. LINE-COL2 = 60.
APPEND LINE TO JTAB.
IF ITAB NE JTAB.
WRITE / 'ITAB NE JTAB'.
ENDIF.
IF ITAB LT JTAB.
WRITE / 'ITAB LT JTAB'.
ENDIF.
The output is:
ITAB GT JTAB
ITAB EQ JTAB
JTAB LE ITAB
ITAB NE JTAB
ITAB LT JTAB
This example creates two standard tables, ITAB and JTAB. ITAB is filled with 3 lines and copied to JTAB. Then, another line is appended to ITAB and the first logical expression tests whether ITAB is greater than JTAB. After appending the same line to JTAB, the second logical expression tests whether both tables are equal. Then, another line is appended to ITAB and the third logical expressions tests whether JTAB is less than or equal to ITAB. Next, another line is appended to JTAB. Its contents are unequal to the contents of the last line of ITAB. The next logical expressions test whether ITAB is not equal to JTAB. The first table field whose contents are different in ITAB and JTAB is COL1 in the last line of the table: 30 in ITAB and 50 in JTAB. Therefore, in the last logical expression, ITAB is less than JTAB.
reward with points and close the thread if your question is solved
regards,
venu.

Compare the elements data of the 2 context nodes using internal table

Hi,
How can i compare the elements data of the 2 context nodes using internal table?
Regards,
Ronita

hi ronita,
just get the nodes data into internal tables and just compare them......
node1->get_static_attributes_table(importing table = ITAB_node1)
node2->get_static_attributes_table(importing table = ITAB_node2)
now u have the data of ur 2 context nodes in 2 different internal tables ..
just compare them like
if ITAB_node1[ ] = ITAB_node2[ ].
write: / 'itab1 is equal to itab2'..
endif.
and u can use as many as comparision operators between these 2 tables to compare them....
regards....
srini,,,,

Sy-tabix for internal table in smartform

Hi friends,
How to capture the sy-tabix value for the entries in an internal table which has been looped into the loop of table node of a smartform?? I need to print something immedaitely after the end of the table
For every record the value of sy-tabix is showing 1 !!
Advance Thanks
Aadarsh

Hi Aadarsh,
Give ur sy-tabix at the end of the loop.
loop at itab.
//table node populations.
endloop.
give a seperate loop for this.
loop at itab.
sy-tabix.
endloop
get the total no and print it after the table.
If u r using do loop then give sy-index.
Hope tihs helps u,
Regards,
Nagarajan.
Message was edited by: Nagarajan Kumarappan

Regarding Exporting and Importing internal table

Hello Experts,
I have two programs:
1) Main program: It create batch jobs through open_job,submit and close job.Giving sub program as SUBMIT.
I am using Export IT to memory id 'MID' to export internal table data to sap memory in the subprogram.
The data will be processed in the subprogram and exporting data to sap memory.I need this data in the main program(And using import to get the data,but it is not working).
Importing IT1 from memory id 'MID' to import the table data in the main program after completing the job(SUBMIT SUBPROGRAM AND RETURN).
Importing is not getting data to internal table.
Can you please suggest something to solve this issue.
Thank you.
Regards,
Anand.

Hi,
This is the code i am using.
DO g_f_packets TIMES.
* Start Immediately
 IF NOT p_imm IS INITIAL .
 g_flg_start = 'X'.
 ENDIF.
 g_f_jobname = 'KZDO_INHERIT'.
 g_f_jobno = g_f_jobno + '001'.
 CONCATENATE g_f_jobname g_f_strtdate g_f_jobno INTO g_f_jobname
 SEPARATED BY '_'.
 CONDENSE g_f_jobname NO-GAPS.
 p_psize1 = p_psize1 + p_psize.
 p_psize2 = p_psize1 - p_psize + 1.
 IF p_psize2 IS INITIAL.
 p_psize2 = 1.
 ENDIF.
 g_f_spname = 'MID'.
 g_f_spid = g_f_spid + '001'.
 CONDENSE g_f_spid NO-GAPS.
 CONCATENATE g_f_spname g_f_spid INTO g_f_spname.
 CONDENSE g_f_spname NO-GAPS.
* ... (1) Job creating...
 CALL FUNCTION 'JOB_OPEN'
 EXPORTING
 jobname = g_f_jobname
 IMPORTING
 jobcount = g_f_jobcount
 EXCEPTIONS
 cant_create_job = 1
 invalid_job_data = 2
 jobname_missing = 3
 OTHERS = 4.
 IF sy-subrc <> 0.
 MESSAGE e469(9j) WITH g_f_jobname.
 ENDIF.
* (2)Report start under job name
 SUBMIT (g_c_prog_kzdo)
 WITH p_lgreg EQ p_lgreg
 WITH s_grvsy IN s_grvsy
 WITH s_prvsy IN s_prvsy
 WITH s_prdat IN s_prdat
 WITH s_datab IN s_datab
 WITH p1 EQ p1
 WITH p3 EQ p3
 WITH p4 EQ p4
 WITH p_mailid EQ g_f_mailid
 WITH p_psize EQ p_psize
 WITH p_psize1 EQ p_psize1
 WITH p_psize2 EQ p_psize2
 WITH spid EQ g_f_spid
 TO SAP-SPOOL WITHOUT SPOOL DYNPRO
 VIA JOB g_f_jobname NUMBER g_f_jobcount AND RETURN.
*(3)Job closed when starts Immediately
 IF NOT p_imm IS INITIAL.
 IF sy-index LE g_f_nojob.
 CALL FUNCTION 'JOB_CLOSE'
 EXPORTING
 jobcount = g_f_jobcount
 jobname = g_f_jobname
 strtimmed = g_flg_start
 EXCEPTIONS
 cant_start_immediate = 1
 invalid_startdate = 2
 jobname_missing = 3
 job_close_failed = 4
 job_nosteps = 5
 job_notex = 6
 lock_failed = 7
 OTHERS = 8.
 gs_jobsts-jobcount = g_f_jobcount.
 gs_jobsts-jobname = g_f_jobname.
 gs_jobsts-spname = g_f_spname.
 APPEND gs_jobsts to gt_jobsts.
 ELSEIF sy-index GT g_f_nojob.
 CLEAR g_f_flg.
 DO. " Wiating untill any job completion
 LOOP AT gt_jobsts into gs_jobsts.
 CLEAR g_f_status.
 CALL FUNCTION 'BP_JOB_STATUS_GET'
 EXPORTING
 JOBCOUNT = gs_jobsts-jobcount
 JOBNAME = gs_jobsts-jobname
 IMPORTING
 STATUS = g_f_status
* HAS_CHILD =
* EXCEPTIONS
* JOB_DOESNT_EXIST = 1
* UNKNOWN_ERROR = 2
* PARENT_CHILD_INCONSISTENCY = 3
* OTHERS = 4
 g_f_mid = gs_jobsts-spname.
 IF g_f_status = 'F'.
 IMPORT gt_final FROM MEMORY ID g_f_mid .
 FREE MEMORY ID gs_jobsts-spname.
 APPEND LINES OF gt_final to gt_final1.
 REFRESH gt_prlist.
 CALL FUNCTION 'JOB_CLOSE'
 EXPORTING
 jobcount = g_f_jobcount
 jobname = g_f_jobname
 strtimmed = g_flg_start
 EXCEPTIONS
 cant_start_immediate = 1
 invalid_startdate = 2
 jobname_missing = 3
 job_close_failed = 4
 job_nosteps = 5
 job_notex = 6
 lock_failed = 7
 OTHERS = 8.
 IF sy-subrc = 0.
 g_f_flg = 'X'.
 gs_jobsts1-jobcount = g_f_jobcount.
 gs_jobsts1-jobname = g_f_jobname.
 gs_jobsts1-spname = g_f_spname.
 APPEND gs_jobsts1 TO gt_jobsts.
 DELETE TABLE gt_jobsts FROM gs_jobsts.
 EXIT.
 ENDIF.
 ENDIF.
 ENDLOOP.
 IF g_f_flg = 'X'.
 CLEAR g_f_flg.
 EXIT.
 ENDIF.
 ENDDO.
 ENDIF.
 ENDIF.
 IF sy-subrc <> 0.
 MESSAGE e539(scpr) WITH g_f_jobname.
 ENDIF.
 COMMIT WORK .
 ENDDO.

How to select the data from a Maintainance View into an internal table

Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.

HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban

Creating XML file from ABAP internal table data....

Hello,
I am fethcing data froma custom table and I have to write data in XMl format. Following is the XML format in which I want data. Is there any function module iN SAP which will help me in writing data from internal table to XML file ?
<batch>
<invoice>
 <StatusCode>10</StatusCode>
 <paymentamount>122.00</paymentamount>
 <ReferenceNumber>70980934</ReferenceNumber>
</invoice>
<invoice>
 <StatusCode>90</StatusCode>
 <paymentamount>122.00</paymentamount>
 <ReferenceNumber>70980934</ReferenceNumber>
</invoice>
<control>
 <InvoiceCount>2</InvoiceCount>
</control>
</batch>
Please help.
Regards,
Jainam.

I suggest you look into "simple transformations". That's SAP's most recent technology for such purposes, as far as I know.
http://help.sap.com/abapdocu_70/en/ABENABAP_ST.htm
Thomas

Need suggestion in uploading dynamic excel file to corresponding columns of internal table

Hi Friends,
I have an excel file which doesn't have standard template. Just the users will key in their header (in row1 ) and followed by item details in excel and upload to internal table. Now by doing some internal developments in program I need to place the values in corresponding fields.
Let me explain with some examples.
1. I have an internal table
data : begin of itab occurs 0,
                   f1,
                   f2,
                   f3,
                   f4,
                   f5,
          end of itab.
2. I have excel file as below
3 . Now i need to fill my internal table itab as below
Need to be placed in corresponding fields.
4. When I used GUI_UPLOAD FM it updates internal table as
Please give me suggestion on how to achieve it.
Thanks in advance.

Hi Kumar,
use a temporary table to get excel values and then parse them to a second table with the format you want.
This is pretty basic.
regards,
Edgar

How to populate data in dynamic internal table

Hi Expert,
fyi. My dynamic internal table field is created base on data selected. Eg. select table qpcd has 5 records. These 5 recods will become fieldname to my dynamic internal table. My dynamic internal table will be
...itab
 01
 02
 03
 04
 05
The 5 records from qpcd is populated in another table call viqmel. I need to find the occurance of each code in viqmel and populate the number of occurance in itab in each of column. The final dynamic itab will be like this
table itab
01 02 03 04 05 -
> field name
2 0 1 0 1 -
> data
my source code like below
Report ZPLYGRND2.
TABLES: mara, makt.
TYPE-POOLS: slis, sydes.
DATA:it_fcat TYPE slis_t_fieldcat_alv,
 is_fcat LIKE LINE OF it_fcat,
 ls_layout TYPE slis_layout_alv.
DATA: it_fieldcat TYPE lvc_t_fcat,
 is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data,
 new_line TYPE REF TO data,
 ob_cont_alv TYPE REF TO cl_gui_custom_container,
 ob_alv TYPE REF TO cl_gui_alv_grid,
 vg_campos(255) TYPE c,
 i_campos LIKE TABLE OF vg_campos,
 vg_campo(30) TYPE c,
 vg_tables(60) TYPE c.
types : begin of t_qpcd,
 codegruppe like qpcd-codegruppe,
 code like qpcd-code,
 end of t_qpcd.
data:wa_qpcd type t_qpcd,
 i_qpcd type standard table of t_qpcd initial size 0.
FIELD-SYMBOLS: <l_table> TYPE table,
 <l_line> TYPE ANY,
 <l_field> TYPE ANY.
select * into corresponding fields of wa_qpcd from qpcd
where katalogart = 'D'
and codegruppe = 'OOT01'.
append wa_qpcd to i_qpcd.
endselect.
loop at i_qpcd into wa_qpcd.
is_fcat-fieldname = wa_qpcd-code.
APPEND is_fcat TO it_fcat.
endloop.
LOOP AT it_fcat INTO is_fcat.
 is_fieldcat-fieldname = is_fcat-fieldname.
 is_fieldcat-ref_field = is_fcat-ref_fieldname.
 is_fieldcat-ref_table = is_fcat-ref_tabname.
 APPEND is_fieldcat TO it_fieldcat.
ENDLOOP.
*... Create the dynamic internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = it_fieldcat
 IMPORTING
 ep_table = new_table.
if sy-subrc = 0.
endif.
*... Create a new line
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
LOOP AT <l_table> INTO <l_line>.
ENDLOOP.

hello dear i m giving u a code in this a dynamic table is made on the basis of table in database , and u can download this data correct it , see it, or even change it....and upload in tht table help full if u dont know the table name...in advance.
also the code to populate data in dynamic table is in this code like:
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
look at the whole program .hope this solve ur problem thanks.
REPORT ZTESTA MESSAGE-ID ZIMM .
TYPES : DATA_OBJECT TYPE REF TO DATA.
DATA : MITAB TYPE REF TO DATA .
TYPE-POOLS : SLIS .
DATA : IT_FIELDCAT TYPE STANDARD TABLE OF SLIS_FIELDCAT_ALV
WITH HEADER LINE .
DATA : IT_FIELDCATALOG TYPE LVC_T_FCAT .
DATA : WA_FIELDCATALOG TYPE LVC_S_FCAT .
DATA : I_STRUCTURE_NAME LIKE DD02L-TABNAME .
DATA : I_CALLBACK_PROGRAM LIKE SY-REPID .
DATA : DYN_LINE TYPE DATA_OBJECT .
FIELD-SYMBOLS : <FS_ITAB> TYPE STANDARD TABLE .
DATA : TABLE_NAME_IS_VALID TYPE C .
DATA : DYNAMIC_IT_INSTANTIATED TYPE C .
CONSTANTS BUTTONSELECTED TYPE C VALUE 'X' .
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_TABL.
PARAMETERS : MTABLE_N LIKE RSRD1-TBMA_VAL
MATCHCODE OBJECT DD_DBTB_16 OBLIGATORY .
DATA CHECKTABLED.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_FILE.
PARAMETERS : MFILENAM LIKE RLGRAP-FILENAME .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_DOWN.
PARAMETERS : P_DOWNLD RADIOBUTTON GROUP GRP1
USER-COMMAND M_UCOMM .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_CHKF.
PARAMETERS : P_CHKFIL RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_UPLD.
PARAMETERS : P_UPLOAD RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_SHOW.
PARAMETERS : P_SHOW_T RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
AT SELECTION-SCREEN OUTPUT .
PERFORM CHECK_FILENAME .
AT SELECTION-SCREEN.
IF SY-UCOMM = 'ONLI'.
 CHECKTABLED = MTABLE_N+0(1).
 IF CHECKTABLED NE 'Z'.
 MESSAGE I017.
 LEAVE TO SCREEN 1000.
 ENDIF.
 IF SY-UNAME NE 'KAMESH.K'.
 MESSAGE I023 WITH SY-UNAME.
 LEAVE TO SCREEN 1000.
 ENDIF.
ENDIF.
IF SY-UCOMM = 'PRIN'.
 CHECKTABLED = MTABLE_N+0(1).
 IF CHECKTABLED NE 'Z'.
 MESSAGE I017.
 LEAVE TO SCREEN 1000.
 ENDIF.
 IF SY-UNAME NE 'KAMESH.K'.
 MESSAGE I023 WITH SY-UNAME.
 LEAVE TO SCREEN 1000.
 ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR MFILENAM .
PERFORM F4_FOR_FILENAME .
INITIALIZATION .
T_TABL = 'Table Name' .
T_FILE = 'File Name' .
T_DOWN = 'Download Table' .
T_CHKF = 'Check File to Upload' .
T_UPLD = 'Upload File' .
T_SHOW = 'Show Table Contents' .
START-OF-SELECTION .
PERFORM CHECK_TABLE_NAME_IS_VALID .
END-OF-SELECTION .
IF TABLE_NAME_IS_VALID EQ ' ' .
 MESSAGE I398(00) WITH 'INVALID TABLE NAME' .
ELSE .
 PERFORM INSTANTIATE_DYNAMIC_INTERNAL_T .
 CHECK DYNAMIC_IT_INSTANTIATED = 'X' .
 CASE BUTTONSELECTED .
 WHEN P_DOWNLD .
 PERFORM SELECT_AND_DOWNLOAD .
 WHEN P_CHKFIL .
 PERFORM CHECK_FILE_TO_UPLOAD .
 WHEN P_UPLOAD .
 PERFORM UPLOAD_FROM_FILE .
 WHEN P_SHOW_T .
 PERFORM SHOW_CONTENTS .
 ENDCASE .
ENDIF .
FORM CHECK_TABLE_NAME_IS_VALID.
DATA MCOUNT TYPE I .
TABLES DD02L .
CLEAR TABLE_NAME_IS_VALID .
SELECT COUNT(*) INTO MCOUNT FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'TABL'
AND OBJ_NAME = MTABLE_N .
IF MCOUNT EQ 1 .
 CLEAR DD02L .
 SELECT SINGLE * FROM DD02L WHERE TABNAME = MTABLE_N .
 IF SY-SUBRC EQ 0.
 IF DD02L-TABCLASS = 'TRANSP' .
 TABLE_NAME_IS_VALID = 'X' .
 ENDIF .
 ENDIF.
ENDIF .
ENDFORM. " CHECK_TABLE_NAME_IS_VALID
FORM SELECT_AND_DOWNLOAD.
CLEAR : <FS_ITAB> .
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
PERFORM CHECK_FILENAME.
CALL FUNCTION 'WS_DOWNLOAD'
 EXPORTING
 FILENAME = MFILENAM
 FILETYPE = 'DAT'
 TABLES
 DATA_TAB = <FS_ITAB>
 EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_WRITE_ERROR = 2
 INVALID_FILESIZE = 3
 INVALID_TYPE = 4
 NO_BATCH = 5
 UNKNOWN_ERROR = 6
 INVALID_TABLE_WIDTH = 7
 GUI_REFUSE_FILETRANSFER = 8
 CUSTOMER_ERROR = 9
 OTHERS = 10.
IF SY-SUBRC EQ 0.
 MESSAGE I398(00) WITH 'Table' MTABLE_N
 'successfully downloaded to '
 MFILENAM .
ENDIF.
ENDFORM. " SELECT_AND_DOWNLOAD
FORM UPLOAD_FROM_FILE.
DATA : ANS TYPE C .
DATA : LINES_OF_ITAB TYPE I .
DATA : MSY_SUBRC TYPE I .
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
 EXPORTING
 TEXTLINE1 = 'Are you sure you wish to upload'
 TEXTLINE2 = 'data from ASCII File to DB table '
 TITEL = 'Confirmation of Data Upload'
 IMPORTING
 ANSWER = ANS.
IF ANS = 'J' .
 PERFORM CHECK_FILENAME.
 CLEAR MSY_SUBRC .
 CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 FILENAME = MFILENAM
 FILETYPE = 'DAT'
 TABLES
 DATA_TAB = <FS_ITAB>
 EXCEPTIONS
 CONVERSION_ERROR = 1
 FILE_OPEN_ERROR = 2
 FILE_READ_ERROR = 3
 INVALID_TYPE = 4
 NO_BATCH = 5
 UNKNOWN_ERROR = 6
 INVALID_TABLE_WIDTH = 7
 GUI_REFUSE_FILETRANSFER = 8
 CUSTOMER_ERROR = 9
 OTHERS = 10.
 MSY_SUBRC = MSY_SUBRC + SY-SUBRC .
 IF SY-SUBRC EQ 0.
 DESCRIBE TABLE <FS_ITAB> LINES LINES_OF_ITAB .
 IF LINES_OF_ITAB GT 0 .
 MODIFY (MTABLE_N) FROM TABLE <FS_ITAB> .
 MSY_SUBRC = MSY_SUBRC + SY-SUBRC .
 ENDIF .
 ENDIF.
 IF MSY_SUBRC EQ 0 .
 MESSAGE I398(00) WITH LINES_OF_ITAB
 'Record(s) inserted in table'
 MTABLE_N .
 ELSE .
 MESSAGE I398(00) WITH
 'Errors occurred No Records inserted in table'
 MTABLE_N .
 ENDIF .
ENDIF .
ENDFORM. " UPLOAD_FROM_FILE
FORM F4_FOR_FILENAME.
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 DEF_PATH = 'C:\'
 MASK = ',.,..'
 MODE = '0'
 IMPORTING
 FILENAME = MFILENAM
 EXCEPTIONS
 INV_WINSYS = 1
 NO_BATCH = 2
 SELECTION_CANCEL = 3
 SELECTION_ERROR = 4
 OTHERS = 5.
ENDFORM. " F4_FOR_FILENAME
FORM CHECK_FILENAME.
IF MFILENAM IS INITIAL
AND NOT ( MTABLE_N IS INITIAL )
AND P_SHOW_T NE BUTTONSELECTED.
 CONCATENATE 'C:\'
 MTABLE_N '.TXT' INTO MFILENAM.
ENDIF .
ENDFORM. " CHECK_FILENAME
FORM INSTANTIATE_DYNAMIC_INTERNAL_T.
CLEAR DYNAMIC_IT_INSTANTIATED .
I_STRUCTURE_NAME = MTABLE_N .
CLEAR IT_FIELDCAT[] .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 I_STRUCTURE_NAME = I_STRUCTURE_NAME
 CHANGING
 CT_FIELDCAT = IT_FIELDCAT[]
 EXCEPTIONS
 INCONSISTENT_INTERFACE = 1
 PROGRAM_ERROR = 2
 OTHERS = 3.
IF SY-SUBRC EQ 0.
 LOOP AT IT_FIELDCAT .
 CLEAR WA_FIELDCATALOG .
 MOVE-CORRESPONDING IT_FIELDCAT TO WA_FIELDCATALOG .
 WA_FIELDCATALOG-REF_FIELD = IT_FIELDCAT-FIELDNAME .
 WA_FIELDCATALOG-REF_TABLE = MTABLE_N .
 APPEND WA_FIELDCATALOG TO IT_FIELDCATALOG .
 ENDLOOP .
 CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
 EXPORTING
 IT_FIELDCATALOG = IT_FIELDCATALOG
 IMPORTING
 EP_TABLE = MITAB .
 ASSIGN MITAB->* TO <FS_ITAB> .
 DYNAMIC_IT_INSTANTIATED = 'X' .
ENDIF.
ENDFORM. " INSTANTIATE_DYNAMIC_INTERNAL_T
FORM SHOW_CONTENTS.
CLEAR : <FS_ITAB> .
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
I_CALLBACK_PROGRAM = SY-REPID .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = I_CALLBACK_PROGRAM
 IT_FIELDCAT = IT_FIELDCAT[]
 TABLES
 T_OUTTAB = <FS_ITAB>
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
ENDFORM. " SHOW_CONTENTS
FORM CHECK_FILE_TO_UPLOAD.
PERFORM CHECK_FILENAME.
CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 FILENAME = MFILENAM
 FILETYPE = 'DAT'
 TABLES
 DATA_TAB = <FS_ITAB>
 EXCEPTIONS
 CONVERSION_ERROR = 1
 FILE_OPEN_ERROR = 2
 FILE_READ_ERROR = 3
 INVALID_TYPE = 4
 NO_BATCH = 5
 UNKNOWN_ERROR = 6
 INVALID_TABLE_WIDTH = 7
 GUI_REFUSE_FILETRANSFER = 8
 CUSTOMER_ERROR = 9
 OTHERS = 10.
IF SY-SUBRC EQ 0.
 I_CALLBACK_PROGRAM = SY-REPID .
 CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = I_CALLBACK_PROGRAM
 IT_FIELDCAT = IT_FIELDCAT[]
 TABLES
 T_OUTTAB = <FS_ITAB>
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
ENDIF .
ENDFORM. " CHECK_FILE_TO_UPLOAD
Message was edited by:
 SAURABH SINGH
 SENIOR EXECUTIVE
 SAMSUNG INDIA ELECTRONICS LTD.,NOIDA

How to upload a file in application server to an internal table

Hi,
 I am asked to upload a file from application server to internal table. Can you please suggest me the ways to do it or the function module which helps to browse the application server file names.
I have done a program. But its giving problem in searching the files from application server. I am pasting my code for ur review. Please tell me which part i have to correct or suggest me some other ways to do it.
*& Report ZUPLOAD1
REPORT ZUPLOAD1.
type-pools: truxs.
parameters: p_upl_ps radiobutton group g1 default 'X', "upload from pres. server
 p_path type rlgrap-filename,
 p_upl_as radiobutton group g1, "upload from appln server
 p_dir LIKE filepath-pathintern DEFAULT 'Y_ABAP',
 p_file LIKE filepath-pathintern lower case,
 p_test as checkbox.
constants: c_x value 'X',
 c_tab type c value cl_abap_char_utilities=>horizontal_tab.
types: ty_data(1000) type c. "structure to hold legacy data
data: i_data type standard table of ty_data. "internal table of ty_data
types: begin of stritab,
 land1 type v_t604-land1, "structure of legacy file.
 stawn type v_t604-stawn,
 bemeh type v_t604-bemeh,
 impma type v_t604-impma,
 minol type v_t604-minol,
 end of stritab.
data: gi_itab type standard table of stritab, "internal table of legacy file
 gw_itab type stritab. "work area
data: i_raw type truxs_t_text_data,
 v_fullpath type string.
at selection-screen on value-request for p_path.
if p_upl_ps = c_x. "if presentation server is selected
perform get_file.
else. "if application server is selected
perform set_file_path.
perform upload_from_server.
perform split_data.
endif.
form get_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
 FILE_NAME = p_path. "getting the file name of pres server
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
 I_LINE_HEADER = 'X' "converting excel to sap and filling in
 I_TAB_RAW_DATA = i_raw "internal table
 I_FILENAME = p_path
TABLES
 I_TAB_CONVERTED_DATA = gi_itab
EXCEPTIONS
 CONVERSION_FAILED = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
form set_file_path. "Getting the file path of application server
data: lv_file type p_file.
 lv_file = p_file.
 CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
 EXPORTING
 CLIENT = SY-MANDT
 LOGICAL_PATH = p_dir
 OPERATING_SYSTEM = SY-OPSYS
 PARAMETER_1 = ' '
 PARAMETER_2 = ' '
 PARAMETER_3 = ' '
 USE_BUFFER = ' '
 FILE_NAME = lv_file
 USE_PRESENTATION_SERVER = ' '
 ELEMINATE_BLANKS = 'X'
 IMPORTING
 FILE_NAME_WITH_PATH = v_fullpath
 EXCEPTIONS
 PATH_NOT_FOUND = 1
 MISSING_PARAMETER = 2
 OPERATING_SYSTEM_NOT_FOUND = 3
 FILE_SYSTEM_NOT_FOUND = 4
 OTHERS = 5
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
endform.
form upload_from_server.
data: lv_msg type string,
 lw_data type ty_data.
open dataset v_fullpath for input message lv_msg in text mode encoding default.
if sy-subrc <> 0.
message lv_msg type 'i'.
stop.
endif.
do.
read dataset v_fullpath into lw_data.
if sy-subrc <> 0.
write:/5 'Error in processign data set'.
exit.
endif.
append lw_data to i_data.
enddo.
close dataset v_fullpath.
if sy-subrc <> 0.
write: /5 'Error closing dataset'.
endif.
endform.
form split_data.
data: lw_data type ty_data.
data: lw_itab type stritab.
data: begin of ty_itab,
 land1 type v_t604-land1,
 stawn type v_t604-stawn,
 bemeh type v_t604-bemeh,
 impma type v_t604-impma,
 minol type v_t604-minol,
 end of ty_itab.
loop at i_data into lw_data.
split lw_data at c_tab into
 ty_itab-land1
 ty_itab-stawn
 ty_itab-bemeh
 ty_itab-impma
 ty_itab-minol.
lw_itab-land1 = ty_itab-land1.
lw_itab-stawn = ty_itab-stawn.
lw_itab-bemeh = ty_itab-bemeh.
lw_itab-impma = ty_itab-impma.
lw_itab-minol = ty_itab-minol.
append lw_itab to gi_itab.
endloop.
endform.
start-of-selection.
loop at gi_itab into gw_itab.
write: /5 'COUNTRY', 'IMPORT CODE', 'SUP UNIT', 'FIRST UOM', 'SECOND UOM',
 /5 gw_itab-land1, gw_itab-stawn,gw_itab-bemeh,gw_itab-impma,gw_itab-minol.
endloop.
end-of-selection.
I hope problem must be in p_dir and p_file which are in bold.. Kindly help me out. Thanks in advance.

see the following ex:
*& Form SUB_GET_FILEPATH
 text
--> p1 text
<-- p2 text
FORM SUB_GET_FILEPATH .
 GFILE = 'D:\SAP_INT\INBOUND\INBOX'. "Path
ENDFORM. " SUB_GET_FILEPATH
*& Form SUB_GET_FILE
 text
--> p1 text
<-- p2 text
FORM SUB_GET_FILE .
DATA: P_FDIR(200) TYPE C.
DATA: IT_FILEDIR1 TYPE STANDARD TABLE OF TY_FILEDIR WITH HEADER LINE.
P_FDIR = GFILE.
CALL FUNCTION 'RZL_READ_DIR_LOCAL'
 EXPORTING
 NAME = P_FDIR
 TABLES
 FILE_TBL = IT_FILEDIR.
REFRESH : IT_FILEDIR1.
LOOP AT IT_FILEDIR.
 IF IT_FILEDIR-NAME(4) = 'ZINC' OR IT_FILEDIR-NAME(4) = 'zinc'.
 MOVE IT_FILEDIR-NAME TO IT_FILEDIR1-NAME.
 APPEND IT_FILEDIR1.
 ENDIF.
ENDLOOP.
IF IT_FILEDIR1[] IS INITIAL.
 STOP.
ENDIF.
LOOP AT IT_FILEDIR1.
 REFRESH: I_TAB.
 CLEAR: I_TAB.
 NAME = IT_FILEDIR1-NAME.
 CONCATENATE: GFILE '\' NAME INTO G_FILE.
 OPEN DATASET G_FILE FOR INPUT IN TEXT MODE
 ENCODING DEFAULT
 IGNORING CONVERSION ERRORS.
 IF SY-SUBRC EQ 0.
 CONCATENATE 'FILENAME : ' G_FILE INTO I_MSG1.
 APPEND I_MSG1.
 DO.
 READ DATASET G_FILE INTO RECORD.
 IF SY-SUBRC = 0.
 SPLIT RECORD AT ',' INTO I_TAB-BUKRS I_TAB-EBELN
 I_TAB-BLDAT I_TAB-XBLNR I_TAB-LIFNR I_TAB-AMOUNT
 I_TAB-CURR I_TAB-BUSAREA
 I_TAB-BKTXT I_TAB-DMBTR I_TAB-MENGE I_TAB-SRNO.
 MOVE-CORRESPONDING I_TAB TO I_TAB1.
 ELSE.
 EXIT.
 ENDIF.
 APPEND I_TAB1.
 CLEAR: I_TAB, I_TAB1.
 ENDDO.
 ENDIF.
 CLOSE DATASET G_FILE.

Use 3 internal table in GUI_Download

Hello expert,
i have 3 internal table: gt_header, gt_body and gt_footer. how can i used all 3 in gui_download fm. here is my sample code:
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename              = gv_file_name
      filetype              = 'ASC'
    TABLES
      data_tab              = gt_header.
here i can only pass one internal table.
Help please?

Hi Hassim,
Maybe you can declare another internal table, with all fields is type C and length as you wanted.
Loop those three itabs, append to this new itab. then call this FM download.
regards,
Archer

IMPORT Statement Issue (Internal Table)

Hi All,
I am using an IMPORT statement to get all the data from other report's internal table. Now whenever this (the other report's internal table) is changed (for field addition, etc), my report throws a dump. Hence, everytime I have to add these fields in my program as well.
Is there any way by which I can include the whole internal table of that report in my program just like
'INCLUDE STRUCTURE VBRK'.
Thanks in advance

Hi, CHeck this code related to your problem..This will helpful to you...
I have done this program earlier..I hope it will helpful to u..
This programa calling the other program to import the data..
Check it out...
*" Tables declarations.................................................
TABLES:
spfli.
*" Type declarations...................................................
Type declaration of the structure to hold data from table SPFLI     *
TYPES:
BEGIN OF type_s_spfli,
    carrid LIKE spfli-carrid,          " Carrier Id
    connid LIKE spfli-connid,          " Connection Number
    cityfrom LIKE spfli-cityfrom,      " City from
    cityto LIKE spfli-cityto,          " City to
    airpfrom LIKE spfli-airpfrom,      " Airport from
    airpto LIKE spfli-airpto,          " Airport to
    countryfr LIKE spfli-countryfr,    " Country from
    countryto LIKE spfli-countryto,    " Country to
END OF type_s_spfli.
Data Declaration...................................................*
     Field String To Hold Flight Details Record from SPFLI          *
DATA
fs_spfli TYPE type_s_spfli.
Data Declaration...................................................*
     Internal Table To Hold Flight Details Records from SPFLI       *
DATA
t_spfli LIKE STANDARD TABLE OF fs_spfli.
TYPES:
BEGIN OF types_s_itab,
    carrid LIKE sflight-carrid,        " Carrier id
    connid LIKE sflight-connid,        " Connection number
    fldate LIKE sflight-fldate,        " Flight date
END OF types_s_itab.
Data Declaration...................................................*
     Field String To Hold Flight Details Record from SFLIGHT        *
DATA
fs_itab TYPE types_s_itab.
Data Declaration...................................................*
     Internal Table To Hold Flight Details Records from SFLIGHT     *
DATA
t_itab LIKE STANDARD TABLE OF fs_itab.
*" Type declarations...................................................
Type declaration of the structure to hold data from table SBOOK     *
TYPES:
BEGIN OF type_s_sbook,
   carrid LIKE sbook-carrid,           " Carrier Id
   connid LIKE sbook-connid,           " Connection Number
   fldate LIKE sbook-fldate,           " Flight date
   bookid LIKE sbook-bookid,           " Booking number
   loccuram LIKE sbook-loccuram,       " Local currency
   loccurkey LIKE sbook-loccurkey,
   order_date LIKE sbook-order_date,   " Booking date
END OF type_s_sbook.
Data Declaration...................................................*
     Field String To Hold Flight Details Record from BOOK           *
DATA
fs_sbook TYPE type_s_sbook.
Data Declaration...................................................*
     Internal Table To Hold Flight Details Records from SBOOK       *
DATA
t_sbook LIKE STANDARD TABLE OF fs_sbook.
DATA
w_checkbox.                          " Checkbox
SELECT-OPTIONS:
s_carr FOR spfli-carrid.             " Carrier id range
                      START-OF-SELECTION EVENT                      *
START-OF-SELECTION.
PERFORM selectq.
                      END-OF-SELECTION EVENT                        *
END-OF-SELECTION.
SET PF-STATUS 'YH1314_030502'.
PERFORM display_basic.
AT USER-COMMAND.
PERFORM ucomm.
*&    Form selectq
    This subroutine retreive data from SPFLI table
There are no interface parameters to be passed to this subroutine.
FORM selectq .
SELECT carrid                        " Carrier id
         connid                        " Connection number
         cityfrom                      " City from
         cityto                        " City to
         airpfrom                      " Airport from
         airpto                        " Airport to
         countryfr                     " Country from
         countryto                     " Country to
         INTO CORRESPONDING FIELDS OF TABLE t_spfli
         FROM spfli
         WHERE carrid IN s_carr.
ENDFORM.                               " Selectq
*&      Form display_basic
    This subroutine displays data from internal table
There are no interface parameters to be passed to this subroutine.
FORM display_basic .
LOOP AT t_spfli INTO fs_spfli.
    WRITE:
      / w_checkbox AS CHECKBOX,
        fs_spfli-carrid,
        fs_spfli-connid,
        fs_spfli-cityfrom,
        fs_spfli-cityto,
        fs_spfli-airpfrom,
        fs_spfli-airpto,
        fs_spfli-countryfr,
        fs_spfli-countryto.
ENDLOOP.                             " LOOP AT T-SPFLI INTO...
ENDFORM.                               " Display_basic
*&      Form UCOMM
This subroutine for at user-command event
There are no interface parameters to be passed to this subroutine.
FORM ucomm .
RANGES :
    r_carr FOR spfli-carrid,
    r_conn FOR spfli-connid,
    r_carrid FOR sflight-carrid,
    r_connid FOR sflight-connid,
    r_fldate FOR sflight-fldate.
CASE sy-ucomm.
    WHEN 'DISPLAY'.
      DATA:
        lw_lines TYPE i,
        lw_lineno TYPE i VALUE 3.
      DESCRIBE TABLE t_spfli LINES lw_lines.
      DO lw_lines TIMES.
        READ LINE lw_lineno FIELD
             VALUE w_checkbox   INTO w_checkbox
                   fs_spfli-carrid INTO fs_spfli-carrid
                   fs_spfli-connid INTO fs_spfli-connid.
        IF sy-subrc = 0.
          IF w_checkbox = 'X'.
            r_carr-sign = 'I'.
            r_carr-option = 'EQ'.
            r_carr-low = fs_spfli-carrid.
            APPEND r_carr.
            r_conn-sign = 'I'.
            r_conn-option = 'EQ'.
            r_conn-low = fs_spfli-connid.
            APPEND r_conn.
          ENDIF.                       " IF W_CHECKBOX = 'X'
        ENDIF.                         " IF SY-SUBRC = 0
        ADD 1 TO lw_lineno.
      ENDDO.                           " DO LW_LINES TIMES
      SUBMIT yh1314_030502_call
        WITH s_carr IN r_carr
        WITH s_conn IN r_conn
         AND RETURN.
      IMPORT t_itab FROM MEMORY ID 'YH1314'.
      LOOP AT t_itab INTO fs_itab.
        r_carrid-sign = 'I'.
        r_carrid-option = 'EQ'.
        r_carrid-low = fs_itab-carrid.
        APPEND r_carrid.
        r_connid-sign = 'I'.
        r_connid-option = 'EQ'.
        r_connid-low = fs_itab-connid.
        APPEND r_connid.
        r_fldate-sign = 'I'.
        r_fldate-option = 'EQ'.
        r_fldate-low = fs_itab-fldate.
        APPEND r_fldate.
      ENDLOOP.                         " LOOP AT T_ITAB INTO.....
      SELECT carrid                    " Carriee Id
             connid                    " Connection number
             fldate                    " Flight date
             bookid                    " Booking number
             loccuram                  " Local Currency
             order_date                " Booking date
         INTO CORRESPONDING FIELDS OF TABLE t_sbook
         FROM sbook
         WHERE carrid IN r_carrid AND
               connid IN r_connid AND
               fldate IN r_fldate.
      IF SY-SUBRC NE 0.
        MESSAGE 'NO RECORDS FOUND'(006) TYPE 'S'.
      ENDIF.                           " IF SY-SUBRC NE 0
      LOOP AT t_sbook INTO fs_sbook.
        AT FIRST.
          WRITE: /5 'Carrier Id'(001),
                 20 'Conn Id'(002),
                 35 'Flight date'(003),
                 50 'Book Id'(004),
                 65 'Local Currency'(005).
        ENDAT.                         " AT FIRST
        WRITE: /5 fs_sbook-carrid,
               20 fs_sbook-connid,
               35 fs_sbook-fldate,
               50 fs_sbook-bookid,
               65 fs_sbook-loccuram CURRENCY fs_sbook-loccurkey.
      ENDLOOP.                         " LOOP AT T_SBOOK INTO.....
ENDCASE.                             " CASE SY-UCOMM
ENDFORM.                               " UCOMM
Regards
Kiran

Internal Table Comparision

Similar Messages

Maybe you are looking for