SAP PLM Engineering Control Center in India...?

Started discussing with customers on the new SAP PLM solution - Engineering Control Center.
I guess, downloads need to be made available for the partners...?

Sure, from sap.com/education contact details below:
Victoria Layo,
30, Vaswani Victoria ,Victoria Road,
Bangalore, 560 025
India
Tel: (91) 80 4136 5555
Fax: (91) 80 4136 5550
E-mail: [email protected]
Have fun,
Mike

Similar Messages

How do I uninstall an "AMD VISION engine control center" "program"? DV7 1264nr

How do I remove AMD VISION Engine Control Center that appears in my programs section? It does not appear in control center programs for uninstalling. It has never worked--when I try to open it, it is stopped. I installed it thinking it was an update to my preinstalled AMD audio program. I have Vista 64 bit on a HP pavilion dv7 1264nr. The error that comes up is "host application has stopped working" and the details are:
Problem signature:
Problem Event Name:    BEX64
Application Name:    CCC.exe
Application Version:    3.5.0.0
Application Timestamp:    4ca242ed
Fault Module Name:    StackHash_1a5d
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Offset:    0000000000000000
Exception Code:    c0000005
Exception Data:    0000000000000008
OS Version:    6.0.6002.2.2.0.768.3
Locale ID:    1033
Additional Information 1:    1a5d
Additional Information 2:    2763c682d3cf8924ea66429d911698ba
Additional Information 3:    3711
Additional Information 4:    a8feb839290a8e26ed1381ba97bf7bec

Thanks, ideato! That worked great, and I didn't really even have to restart Firefox to see that it did. I just changed it as you suggested, then opened a new tab, and ''voila'', it was blank!
For anyone else with this issue, if you use ideato's link to about:config, it takes you to a help page which says to type "about:config" into the browser's url field, which takes you to the page where this change can be made....

Cannot start AMD Vision Engine Control Center

HP Pavilion p7-1534 Desktop PC, Windows 8, 64-bit, When i try to open AMD VISION Engine Control Center, I keep get this message,( AMD VISION Engine Control Center cannot be started. there are currently no settings that can be configured using AMD VISION Engine Control Center). This happen after i download and install some tech demos, that was two months ago. Today, i was going to do a restore but my restore points don't go back two months ago. What should i do. When i first bought this PC two months ago, i could open it fine.
This question was solved.
View Solution.

Hi arasthth. What is the exact model number of your DV6? What version of Windows is installed?
<How Do I Find My Desktop Model Number>: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07555
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Sap plm-qm functionalities implementation

I need to implement SAP PLM FMEA ,CONTROL PLAN for APQC process.
what are process steps that need to be implemented. What are the master data required and configuration need to be done.
Can anyone help me to understand about this.

Hi,
Please go through the below articles on FMEA and control plan
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7057a7f2-ef7c-2c10-a1b5-85469a06372b?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0063c232-199e-2c10-5482-eed82c19b416?QuickLink=index&overridelayout=true
Regards
Hari

SAP PLM

Hi Guys
I am have working on PDM(Team center), VPM(Enovia DPM) and Catia V5 since 2 years now and I am planning to change to SAP PLM. Can any one help me Do i need to Have knowledge in any other things other then PDM, VPM to start up with SAP PLM.
If I want to take p my certification in SAP PLM where can i get it,( Do i need to contact Siemens for it or i can try with some other place)
Your help will be Appreciated
Pradeep

Hi Pradeep,
1.As you have worked in PDM (Team Center), and other CAD packages, you will be knowing the Functional processes/activities involved in the PLM which is very much required to learn and give solutions in SAP PLM.
2. As you must have worked with BOM, Documents, workflows, Organizational hierarchies, Roles & Responsibilities (Draftsmen, Junior/Assist Design Engineer, Design Engineer, Project Manager etc etc) and their authorizations.
3. So with these things it is very easy to learn & work with SAP PLM, if you are currently working in non-sap or any functional domain, you can join any SAP implementation company as a Trainee or Fresher and get trained on SAP
or there are many training institutes which train SAP even for 25-30K without certification. (You will get a fare idea about what SAP is )
Even SAP PLM starts with PDM Objects like, Material Master, Document Managment System, Engineering Change Managment (Versioning/Revisioning for BOM, MM, DIR), Bill of Materials, Classification System (Classes, Characteristics, Object Dependencies etc) all this are PDM Objects in SAP.
And there is Collaboration Projects, Collabortion Folders and CAD Integrations. etc these all together constitutes a SAP PLM
For Certification on SAP PLM below mentioned are details. and follow the link as well
https://websmp203.sap-ag.de/certification
SAP Consultant Certification
Solution Consultant PLM - Project Management with mySAP ERP 2005
Software components: SAP ERP Central Component 6.0
Certification exam is included in course TPLM22 and is also offered in separate certification events at many SAP locations.
Certification ID (Booking code):
C_TPLM22_05
Certification duration: 3 hours
Number of certification questions: 30
Required certificates for participation in this certification test: None
Consultant Academy courses for certification preparation: TPLM20 (Project Management I), TPLM22 (Project Management II (Case Study))
Alternative Project Team Training courses for certification preparation:
PLM
200 (Project Management), PLM210 (Project Management - Structuring), PLM 220 (Project Management Logistic), PLM230 (Project Management Controlling), PLM240 (Project Management Reporting)
Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
The certification test Solution Consultant PLM Project Management with mySAP ERP 2005 verifies the knowledge in the area of the mySAP Product Lifecycle Management for the consultant profile Project Management. This certificate proves that the candidate has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
The certification test consists of questions from the areas specified below:
Topic Areas
1. Project Structuring (+++)
Basic data in PS: work breakdown structure, network and activities, milestones, PS texts, documents
Project Builder and project planning board
Project simulation
Standard work breakdown structure, standard network
Assembly processing
2. Dates (+)
Time scheduling and scheduling (network scheduling, project scheduling, overall network scheduling)
Actual dates
3. Resources (+)
Work center
Capacity planning and capacity evaluation
Workforce planning to HR resource
Confirmation and working time sheet
Internet scenarios
Workflows in PS
4. Material (+)
Work breakdown structure BOM
BOM PS interface
Component assignment in the network
Material procurement through in-house production or external procurement
Collective stock and project stock
Requirements grouping
Progress tracking
ProMan
Delivery from the project
5. Costs and Budget (++)
Cost planning in the work breakdown structure
Network costing
Assigning orders to the project
Budgeting and availability control
Commitment and actual costs through account assignment and order assignment
6. Revenue and Payments (+)
Revenue and payment planning in the project
Sales pricing and quotation creation
Resource-related billing
Milestone billing and down payment processing
7. Period-End Closing (+)
Template allocation
Application of overhead
Interest calculation
Progress analysis and Progress Analysis Workbench.
Results analysis
Incoming orders
Settlement
8 Miscellaneous (+)
Exernal service and service activities
Organizational units in SAP ERP
Info systems in project management
Field selection
OpenPS
Amount of questions by topic (as percentage of test):
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
No responsibility is taken for the correctness of this information. Copyright © SAP AG 2006.
Very Important:
http://mysapbi.blogspot.com/2007/01/sap-help-in-pdf-files.html
Regards
Rehman
Reward Points if Useful

SAP PLM, ERP, PPM relationships

Hi PLM experts,
I have some questions about the SAP PLM products as below, would you share your insights? Thanks.
1. Most of PLM sub-modules are the functions of SAP ECC components as I see. So what's the relationship between SAP PLM and SAP ECC?
2. SAP PLM can be installed as an independent instance or as an integrated instance with SAP ECC as I read from document. Is it correct?
3. I read SAP PPM can be installed as an independent instance as well, what's PPM relationship to SAP PLM?
4. Most PLM user interface is using Web UI. Is it based ABAP webdynpro or Java webdynpro? Someone told me it's based on FPM framework in ABAP wedynpro. If you know, please share me your idea as well.
5. Any workflow function in SAP PLM? If user requires workflow to manage R&D process in SAP PLM, is it using similar ABAP workflow technology as in SAP ECC? Or java-based workflow as in BPM?
Appreciate your expert share.

Hi Justin,
see responses below:
1. Most of PLM sub-modules are the functions of SAP ECC components as I see. So what's the relationship between SAP PLM and SAP ECC?
SAP PLM capabilities are an integral part of SAP ECC, some are natively available like SAP GUI based BOM Management, Classification, Variant Configuration, Engineeering Change Management, etc., some , especially those in the PLM Web UI, need to be activated through Business Functions made available in various standard SAP ECC Enhancement Packages and partially licensed, like e.g. Engineering Record, Product Structure Synchronization, Access Control Management.
2. SAP PLM can be installed as an independent instance or as an integrated instance with SAP ECC as I read from document. Is it correct?
Yes.
3. I read SAP PPM can be installed as an independent instance as well, what's PPM relationship to SAP PLM?
SAP PPM is a a standalone product with its own license. It integrates into SAP ERP/PLM and other legacy and Business Suite solutions.
4. Most PLM user interface is using Web UI. Is it based ABAP webdynpro or Java webdynpro? Someone told me it's based on FPM framework in ABAP wedynpro. If you know, please share me your idea as well.
PLM Web UI is ABAP WebDynpro. And yes, it uses Floor Plan Manager.
5. Any workflow function in SAP PLM? If user requires workflow to manage R&D process in SAP PLM, is it using similar ABAP workflow technology as in SAP ECC? Or java-based workflow as in BPM?
SAP Business Workflow is leveraged in SAP PLM. Anyone can feel free to use SAP BPM as well, especially if workflows are crossing applications, and need to be orchestrated accordingly.
Hope this helps.
Ulf.

SAP PLM Vs Other PLMs

Hi,
Does anybody have information about the short comings which SAP PLM has vis-a-vis other PLM's?
I would be interested in getting the same.
Rgds
Anil Acharya

Here below my 2 Cents of comparison between conventional PDM tools & SAP
Though conventional tools are called PLM, it's not exactly true PLM tools. Conventional tools require sea change to be called as PLM tools. Here are the reasons.
The true Product Lifecycle Management is nothing but, software tool which can facilitate integrations between all stakeholders (such as Product company, Suppliers, Customers etc.) within and outside the enterprise from product concept to obsolete stage.
Most of the Conventional PLM tools serve the integrations within few departments of the enterprise, such as Design & Manufacturing.
As for as SAP PLM is concern it provides the integration between all the departments, but it will not have any tight integration between CAX tools.
If SAP bridge the above gap with tight integration with Team Center Engineering, then SAP can fly.
I hope I have provided the info. rather than confusion.
Regards

Problem with registering device in Sybase Control Center with SUP 2.2 SP04

Hi,
I have Sybase Unwired Platform SP04, and I am trying to register my Android device in Sybase Control Center. I registered application connection with HWC as a template. I also installed 2 Sybase apps from Google Play Store on my Android device - Sybase Hybrid Web Container and Sybase Mobile Workflow 2.1. When I tried connecting to Sybase Control Center from my Android device using Sybase Mobile Workflow 2.1, there were no log updates at all. I entered IP address of my computer where I installed SUP as server name. It seemed like Sybase Mobile Workflow 2.1 did not work at all on my Android device. However, there are some log messages when I try to connect to SCC through Sybase Hybrid Web Container - "Engine Startup", "Queued Settings Request", "Communication Error".
I was able to successfully register my Android Emulator on SCC using Hybrid Web Container app and test my hybrid web app. What could be the reason for not being able to register a real device on SCC? Is this the wrong Sybase app used on the device? Or some kind of network issue? Both my android device and my computer are connected to the same home WiFi network and have 192.168.x.y IP addresses, which are local IP addresses accordng to my knowledge.
I was told that if I am unable to open SCC on the device by typing https://<IP_address>:8283/scc in a browser, then my device won't be able to access SCC. And, in fact, my Android device cannot open SCC in its browser, while my Android emulator can.
I have tried using USB or WiFi tethering to so that my laptop actually uses exactly the same Internet connection as my Android phone, but this didn't help either. If someone has any idea on how to fix this, your help will be appreciated!
- Jake Alexander

When I open that page on my device's browser, it says that my browser couldn't connect to it.
I don't think my Firewall blocks port 5001, because I have never set it to do it, and I don't see any outbound or inbound rules on my Windows Firewall to block port 5001. I don't think that my WiFi network would block port 5001, but I can't be sure of it. However, I was told that if I create a portable WiFi hotspot and connect my computer with SUP on it to the hotspot, then my computer and Android device would be on the same network even without Internet Connection, and I would be able to connect to SCC on my device, However, even in this case it did not work.
Thanks,
Jake

SAP J2EE Engine : does not work !!!

Hi everyone,
I have installed SAP NW2004s Java SP9 Trial (on Windows XP and Sapdb as database). The installation finished without problems.
But when I start my SAP system, the SAP J2EE engine (process jcontrol) is still stopped
[... I have already searched in the forum, but I have not found a solution to my problem ...]
Here is the contents of files dev_jcontrol & dev_sdm :
File dev_jcontrol : *************************************
trc file: "D:\usr\sap\J2E\JC01\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 1384
system name : J2E
system nr. : 01
started at : Mon Dec 03 15:23:56 2007
arguments :
 arg[00] : D:\usr\sap\J2E\JC01\exe\jcontrol.EXE
 arg[01] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_ahassaine
[Thr 2356] Mon Dec 03 15:23:56 2007
[Thr 2356] *** ERROR => Can't open property file [D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties] [jstartxx.c 725]
[Thr 2356] *** ERROR => Can't open property file [D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties] [jstartxx.c 1952]
[Thr 2356] *** ERROR => JStartupReadArgumentsEx: can't enumerate nodes [D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties;D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties] (rc = -1) [jstartxx.c 524]
File dev_sdm : *************************************
trc file: "D:\usr\sap\J2E\JC01\work\dev_sdm", trc level: 1, release: "700"
node name : sdm
pid : 1360
system name : J2E
system nr. : 01
started at : Fri Nov 30 10:38:29 2007
arguments :
 arg[00] : D:\usr\sap\J2E\JC01\exe\jlaunch.exe
 arg[01] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_ahassaine
 arg[02] : -DSAPINFO=J2E_01_sdm
 arg[03] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_ahassaine
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties]
-> ms host : ahassaine
-> ms port : 3900
-> OS libs : D:\usr\sap\J2E\JC01\exe
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : ahassaine
-> ms port : 3900
-> os libs : D:\usr\sap\J2E\JC01\exe
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
Worker nodes
-> [00] sdm : D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties
[Thr 3544] Fri Nov 30 10:38:29 2007
[Thr 3544] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 3544] JLaunchRequestQueueInit: create pipe listener thread
[Thr 2240] JLaunchRequestFunc: Thread 2240 started as listener thread for np messages.
[Thr 3352] WaitSyncSemThread: Thread 3352 started as semaphore monitor thread.
[Thr 3544] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 3544] CPIC (version=700.2005.12.02)
[Thr 3544] INFO: Invalid property value [Debbugable=yes]
[Thr 3544] [Node: SDM] java home is set by profile parameter
 Java Home: C:\Java\
[Thr 3544] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\J2E\JC01\exe\jvmx.jar
JStartupIReadSection: read node properties [sdm]
-> node name : SDM
-> node type : sdm
-> node execute : yes
-> java path : C:\Java\
-> java parameters :
-> java vm version : 1.4.2_09-b05
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 512M
-> root path : D:\usr\sap\J2E\JC01\SDM\program
-> class path : D:\usr\sap\J2E\JC01\SDM\program\bin\SDM.jar
-> OS libs path : D:\usr\sap\J2E\JC01\exe
-> main class : SDMInternal
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\J2E\JC01\exe\jstartup.jar;D:\usr\sap\J2E\JC01\exe\jvmx.jar
-> shutdown class : com.sap.sdm.jstartup.shutdown.InternalShutDown
-> parameters : server sdmhome=D:\usr\sap\J2E\JC01\SDM\program
-> debuggable : yes
-> debug mode : no
-> debug port : 50000
-> shutdown timeout : 120000
[Thr 3544] JLaunchISetDebugMode: set debug mode [no]
[Thr 2480] JLaunchIStartFunc: Thread 2480 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [SDM]
-> stack : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Dsys.global.dir=D:\usr\sap\J2E\SYS\global
-> arg[ 4]: -Dapplication.home=D:\usr\sap\J2E\JC01\exe
-> arg[ 5]: -Djava.class.path=D:\usr\sap\J2E\JC01\exe\jstartup.jar;D:\usr\sap\J2E\JC01\exe\jvmx.jar;D:\usr\sap\J2E\JC01\SDM\program\bin\SDM.jar
-> arg[ 6]: -Djava.library.path=C:\Java
jre\bin\server;C:\Java
jre\bin;C:\Java
bin;D:\usr\sap\J2E\JC01\exe;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI Control Panel;D:\usr\sap\J2E\SYS\exe\uc\NTI386
-> arg[ 7]: -Dmemory.manager=512M
-> arg[ 8]: -Xmx512M
-> arg[ 9]: -DLoadBalanceRestricted=no
-> arg[ 10]: -Djstartup.mode=JCONTROL
-> arg[ 11]: -Djstartup.ownProcessId=1360
-> arg[ 12]: -Djstartup.ownHardwareId=G1610100576
-> arg[ 13]: -Djstartup.whoami=sdm
-> arg[ 14]: -Djstartup.debuggable=yes
-> arg[ 15]: -DSAPINFO=J2E_01_sdm
-> arg[ 16]: -DSAPSTARTUP=1
-> arg[ 17]: -DSAPSYSTEM=01
-> arg[ 18]: -DSAPSYSTEMNAME=J2E
-> arg[ 19]: -DSAPMYNAME=ahassaine_J2E_01
-> arg[ 20]: -DSAPDBHOST=ahassaine
-> arg[ 21]: -Dj2ee.dbhost=ahassaine
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude iaik/security/md/SHA a
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
[Thr 2480] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [SDM]
-> arg[ 0]: server
-> arg[ 1]: sdmhome=D:\usr\sap\J2E\JC01\SDM\program
[Thr 2240] Fri Nov 30 10:38:33 2007
[Thr 2240] JLaunchRequestFunc: receive command:17, argument:0 from pid:2600
[Thr 2240] JLaunchIShutdownInvoke: set shutdown interval (stop:1196419113/end:1196419233/TO:120)
[Thr 2240] JLaunchProcessCommand: Invoke VM Shutdown
[Thr 2240] JHVM_FrameworkShutdownDirect: invoke direct shutdown
[Thr 2240] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 2240] JLaunchISetState: change state from [Initial (0)] to [Stopping (5)]
[Thr 640] Fri Nov 30 10:38:34 2007
[Thr 640] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 640] JLaunchCloseProgram: good bye (exitcode = 0)
Thank you very much in advance for your help.
Hassan

Hi!
If instance.properties is not there your installation has not finished correctly. This file is the central point of information for the bootstrap, which retrieves the info on how to connect to the database to collect the infos for the system startup (which will then overwrite your instance.properties file with the most recent values from the DB).
Please check if instance.properties has been deleted and can maybe be restored from tape or if there was an error in the installation.
Regards,
Jörg

Error when starting SAP J2EE Engine Log Viewer Service

Hi,
I'm running SAP EP6 SP14.
I need to make the default trace log file on the WAS Server (Windows) available to the developer's. For this goal, I am attempting to install and start the SAP J2EE Engine LogViewer Service on the WAS. I think I have configured the service.ini file appropropriately. When I register the service, I get a successful message that the service has been registed. The service even shows up in the Windows Service Manager.
However, when I attempt to start the service, the process fails after a 4-minute attempt. I eventually get an error popup saying
"Could not start the SAP J2EE Engine Logviewer service on the Local Computer"
"Error 1053: The service did not respond to the start or control request in a timely fashion".
The service shows as "starting" until I reboot the WAS.
The logviewer.bat runs fine on the WAS itself.
I can also connect from the client to the WAS thru the J2EE connection, but that requires the admin password. I'd rather get this approach to work.
Regards,
Kevin

Hi,
I have the same error during starting the service. How did you resolve that error?
Regards
Sabine

Multiple AutoCAD files in one DIR using Cideon integration to SAP PLM

Hi,
We are testing the AutoCAD integration with SAP PLM and so far have been unable to figure out how to work with a DIR that has multiple autocad originals. Specifically, an individual AutoCAD file for each sheet of a multi sheet drawing. Has anybody done this before? Using a different document part for each drawing sheet is not an option for us.
Thanks,
Joseph Whiteley

Hello again,
The available standard 3rd party connector for AutoCAD doesn't support the functionality you have mentioned. It will require special custom enhancements available from same vendor which will cost extra bucks. We ended up using the same solution that John suggested. Create only a single DIR for the entire Multi sheet drawing and use the AutoCAD DWG viewer instead of the ECL viewer, I'm not 100% sure but ECL viewer does not support viewing individual sheets of this single drawing. Last I knew on this topic is that SAP is moving away from ECL viewer to Right Hemisphere not sure what happened though! Also having a single DIR will lead to requiring enhancements while using Conversion engine (for PDF conversion).
We still face troubles when it comes to our change process, approval, and transmittal process.
NK

In sap plm projects

hi guru.
in sap plm projects is this necessary , to generate the reports,scripts.
what is exactly sap plm projects,give some idea briefly.because just recently
i got offer for working in sap plm development projects.
help me.
thanks& regards
subhasis

Hi Subhasis,
Are you a Technical/Functional i.e. ABAP/Functional please let me know?
If you are a Technical (ABAP) then you no need to worry about your work in PLM
your work remains same as of ABAP. i.e. you will be working on Function Modules, User Exits, Field Exits, Report Design, Scripts & enhancements etc.
The Objects/Area which you will be dealing are : Document Managment System (DMS), Engineering Change Management (ECM), & CAD Integration yes i forget to mentioned you will be working on "Interfaces" too. and rest in PS or CProjects & CFolders based on the Scenarios/Requirements of your Project.
If you are a Functional:
Then working in PLM is still easy if you have a experience of working in SAP,
First part of your PLM is PDM (Product Data Managment) which deals with
DMS, ECM, CAD Integration, Material Master, BOM etc
Basically you have to integrate all these objects or business objects precicely speaking to all the modules of the SAP R/3.
Welcome to the board.
If you have any specific questions, you can write at SDN, SDN team will help you at maximum, no need to worry.
Best Regards
Rehman
Mark Useful Answers

Want to learn SAP PLM

Hi All,
I have 11 years of experience in Enovia PLM (java based PLM tool) and has good understanding of Engineering Management, Product configuration and Product portfolio management.
I want to improve breadth of my knowledge and want to learn SAP PLM
Can any of you guide me where to start.
I am currently at Atlanta GA USA Are there any good online training institutes.
Also please let me know good websites to learn about SAP PLM
Thanks & Regards
Murali

Hi Murali,
There are different ways you can learn SAP PLM:
1) Easy but costly way is through attending cources run by different SAP Authorized Training Centers. By Training route u will get proper step by step guidance on different PLM functions, but it will have some impact on your pocket.
2) You can read SAP Help available online. But trust me without assistance its like learning greek.
3) There are different Presentations available on internet made by consultant for their customer. It would be great first step towards excellence.
Mentioned above are few ways by which you can learn SAP PLM, however the time & understanding level totally depend upon your will to get mastered into it.
Thanks & Regards
Gourav Kumar

Can any body tell me about sap-plm from technical point of view

In sap-plm from the development point of view what abapers task

Hi Prasoon,
PLM very wide area but from ABAP point of view it depends which area you are working on, like it includes Bill of Materials, Document Management System, Classifications, Product Structure Browser, Engineering Change Mangement, etc within R/3 and apart from this it even includes Project System
on Web application Systems it includes Collaboration Projects & Collaboration Folders.
ABAP work comes for enhancements, Functional Modules, User Exists, Feild Exists, Interfaces(RFC) for CAD Integrations etc, & Reports like ALV etc.
It Depends which part of PLM you are working on & what is the requirement where in ABAP development is required so in general it is difficult to answer this question but for any particular/specific requirements anybody will answer.
Hope you might have got the fair idea of PLM
Regards
Rehman
Mark Useful Answers

New to sap plm

hi all
i am interested to know abt sap ps.
1) does SAP Project Systems and SAP PLM or same?
2)what is the pre- requisites to learn SAP PS?(i am a sap xi consultant with abap back ground).
3) i want to know the job prospects as SAP PS consultant?if it is in high-demand how to get a break in it?
thanks heaps in advance
regards
kish

Hi
PLM With the expansion Product LifeCycle Management we can say that it is a traceing/tracking a Product throughout its lifecycle.
i.e. from IDea generation (Concept) to the End of the Product
There are different tracktion for PLM in SAP
1. Product Data Management
which covers Material Management, Bill of Material, Document Managment System, Classification System, Variant Configurations, CAD Interfaces. etc.
Most of the Industries will be using these cross application components for their Engineering Departments.
2. Program Management
Where Entire Program is capture i.e. From Customer Enquirry to the Order execution and till Dispatch.
Here again Project System, CFolder, CProjects, DMS, MM, BOM, Workflow etc can be a part of the PLM
3. Asset LifeCylce Management
This is used in different Scenarios where companies wants to trace there assets
or lifecycle of their assets.
Project Systems and DMS will be mostly involved.
4. Quality Managment
Strictly Speaking PLM Products are used in R& D Department, Engineering Department, Design & Drafting Departments of the Companies/organizations,
Where they try to modify their existing Products, try to Design as per the customer requirements, Try to launch new Product by doing R & D works.
PLM is Mostly used in these Departments of the Organizations
Regards
Rehman

SAP PLM Engineering Control Center in India...?

Similar Messages

Maybe you are looking for