Internationalization for dynamic data

HI ..i want to know how to do internationalization for dynamic data that is from database...
Please let me know
Thanks in advance
Rams

HI
You can do the trick by extending ResourceBundle (or ListResourceBundle) and write your own handleGetObject and getKeys method.
But in that case you are forced to create different classes for different locales and follow the naming convention for bundles:
If your class for the default locale is MyResourceBundle, then for all the other locales you have to create a class called "MyResourceBundle_"+localeName .
But I don't know how can I bypass this strange behaviour. All the getBundle, and getBundleImpl methods are static. So if a framework call your class through ResourceBundle.getBundle() static method you are forced to do this. If you want to change you have to call your class. So you need to instantiate your ResuorceBundle class yourself.
Bence

Similar Messages

Build field catalog for dynamic data objects

Hi
Could you please tell me how to build a field catalog (ooops alv) for an internal table which is a dynamic data object.
TYPES: BEGIN OF t_addsubty,
         subty TYPE subty,
         pernr TYPE persno,
         END OF t_addsubty.
TYPES: ty_addsubty type t_addsubty occurs 1.
i have data object using these
        CREATE DATA dref3 TYPE (g_type1).
        ASSIGN dref3->* TO <fs_dp>.
where g_type1 refers a data type which i defined in the program. g_type1 = ty_addsubty.
now <fs_dp> refers to an internal table.
now i want to build a field catalog for this internal table.
In my program <fs_dp> structure is not always the same. i.e now it is ty_addsubty but for some other conditions the structure is different.
please help me out.
regards
badri

Here some piece of code, which shows how it works:
<SNIP>
type-pools:
     abap.
DATA:
lr_tabledescr          TYPE REF TO cl_abap_tabledescr,
lr_structdescr     TYPE REF TO cl_abap_structdescr.
field-symbols:
<lw_component>     type abap_compdescr_tab.
TYPES:
     BEGIN OF t_addsubty,
          subty TYPE subty,
          pernr TYPE persno,
     END OF t_addsubty.
TYPES:
     ty_addsubty type t_addsubty occurs 1.
CREATE DATA dref3 TYPE (g_type1).
ASSIGN dref3->* TO <fs_dp>.
lr_tabledescr ?= cl_abap_tabledescr=>describe_by_data( <fs_dp> ).
assert condition lr_tabledescr is bound.
lr_structdescr ?= lr_tabledescr->get_table_line_type( ).
loop at lr_structdescr->components assigning <lw_component>.
*     do whatever you want with the information about
*     the components of the structure
endloop.
</SNIP>
Do not forget to reward points...

Scheduling WebI reports for Dynamic Date Ranges

Hello Everyone,
Our Env is BOBJ XI 3.1 SP2 FP2.5 integrated with SAP NW BW 7.02 EPH1
We are trying to schedule few WebI reports which can be used on ad-hoc basis as well. Some reports need to get data from starting of the month to today (like MTD) and few are with dynamic date ranges.
In case of relational universes i used to do Magic Date as mentioned here : http://www.dagira.com/2008/07/21/using-a-magic-date-value-in-prompts
But for OLAP Universes i have written a MDX filter prompt as :
<FILTER KEY= "@Select(Debit Memo Date\Debit Memo Date LOV)">
<CONDITION OPERATORCONDITION= "Between">
<CONSTANT CAPTION= "IIF (@Prompt('Enter\Select DM Start Date: ','D','First day of Current Month\First day of Current Month',mono,free,not_persistent,{'First Day of Month'},,User:0)='First Day of Month','First day of Current Month\First day of Current Month',@Prompt('Enter\Select DM Start Date: ','D','First day of Current Month\First day of Current Month',mono,free,not_persistent,{'First Day of Month'},,User:0))"/>
<CONSTANT CAPTION= "IIF (@Prompt('Enter\Select DM End Date: ','D','Date2\Today',mono,free,not_persistent,{'Today'},,User:0) > '1/1/2100 12:00:00 AM',''1/1/2010 12:00:00 AM'',(@Prompt('Enter\Select DM End Date: ','D','Date2\Today',mono,free,not_persistent,{'Today'},,User:0))"/>
</CONDITION>
</FILTER>
We are getting MDX erros because IIF can only return numeric values. So are there any other approaches for dynamically scheduling the reports or can the above MDX prompt be modified to make it work ?
- Vamsi Ch

Ingo,
When we schedule the WEBI report we use the BEX query with a variable based on a customer Exit .
There are good examples in
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
In order to avoid providing a hard coded date restriction in the BEX query we want to have a flexible date range solution (e.g. data from 1.1.2011 until yesterday).
Is the folloing scenario possible:
Scheduled webi report with a hard coded date e.g. 1.1.1900 (for the BEX variable)
The BEX query should return the data from 1.1.2011 until yesterday (dynamically) if date = 1.1.1900
else it should return the data (for the e.g. adhoc reporting)
Is a customer exit like this possible ?
Pseudo code:
IF date = 1.1.900 then return sysdate-1 else return entered date
For a relational universe I always used a magic date condition

Program to regenerate user variants for dynamic date selection!

Hello all:
We upgraded to ECC6.0 from 4.6C and there are some variants that user created in 4.6C in which they set dates like date = date - 1day something like that (basically dynamic date selection). These variants are not working in ECC6.0 unless the user clicks on the variant button and resaves it!! Does anyone know if there is any SAP program that I can run that does this automatically? Rewards assured.
Thanks.
Mithun

Thanks for the reply Rob. We already ran RSVARDOC_610! Is there any specific program just for the issue I am having?
Thanks.
Mithun

Dynamic rows for dynamic data

Hi,
Can i have a JTable in which i create number of rows depending on the data i retreive frm the database, and also increase the number of rows on some kind of event.
For example:
I have to enter into a JTable names of students who are being admitted to a school, i have a specific format in the UI with fields(columns) like Name, Age, Sex. I give them a 5 rows as default. As the user comes to the 5th and 5th cell, tht is last cell of the table, as soon as the user presses Enter key another row/s should appear. And also if i am retreiving frm the database, depending on a query like give me names of students who are all females, then i dont know the number of rows required, therefore deciding dynamically or on-the-fly the number of rows required.
Please if you can help me, tht will be great.
Thank You.
Ehsaan
p.s-If u need more information pls do write.

Here's an example of a model you may want to use. It allows you to add or subtract rows, as needed. It starts with 0 rows - in this case.
You need to define another class TableRecord, which basically is contains the data to insert into a row.
Hope this helps.
public class FileModel extends AbstractTableModel
public boolean isEditable = false;
protected static int NUM_COLUMNS = 3;
// initialize number of rows to start out with ...
protected static int START_NUM_ROWS = 0;
protected int nextEmptyRow = 0;
protected int numRows = 0;
static final public String first= "First";
static final public String second= "Second";
static final public String third= "Third";
static final public String columnNames[] = {"FIrst", "Second", "Third"};
// List of data
protected Vector data = null;
public FileModel()
data = new Vector();
public boolean isCellEditable(int rowIndex, int columnIndex)
// The 3rd column or Value field is editable
if(isEditable)
if(columnIndex > 1)
return true;
return false;
public Class getColumnClass(int c)
return getValueAt(0, c).getClass();
* Retrieves number of columns
public synchronized int getColumnCount()
return NUM_COLUMNS;
* Get a column name
public String getColumnName(int col)
return columnNames[col];
* Retrieves number of records
public synchronized int getRowCount()
if (numRows < START_NUM_ROWS)
return START_NUM_ROWS;
else
return numRows;
* Returns cell information of a record at location row,column
public synchronized Object getValueAt(int row, int column)
try
FileRecord p = (FileRecord)data.elementAt(row);
switch (column)
case 0:
return (String)p.first;
case 1:
return (String)p.second;
case 2:
return (String)p.third;
catch (Exception e)
return "";
public void setValueAt(Object aValue, int row, int column)
FileRecord arow = (FileRecord)data.elementAt(row);
arow.setElementAt((String)aValue, column);
fireTableCellUpdated(row, column);
* Returns information of an entire record at location row
public synchronized FileRecord getRecordAt(int row) throws Exception
try
return (FileRecord)data.elementAt(row);
catch (Exception e)
throw new Exception("Record not found");
* Used to add or update a record
* @param tableRecord
public synchronized void updateRecord(FileRecord tableRecord)
String file = tableRecord.file;
FileRecord p = null;
int index = -1;
boolean found = false;
boolean addedRow = false;
int i = 0;
while (!found && (i < nextEmptyRow))
p = (FileRecord)data.elementAt(i);
if (p.file.equals(file))
found = true;
index = i;
} else
i++;
if (found)
{ //update
data.setElementAt(tableRecord, index);
else
if (numRows <= nextEmptyRow)
//add a row
numRows++;
addedRow = true;
index = nextEmptyRow;
data.addElement(tableRecord);
//Notify listeners that the data changed.
if (addedRow)
nextEmptyRow++;
fireTableRowsInserted(index, index);
else
fireTableRowsUpdated(index, index);
* Used to delete a record
public synchronized void deleteRecord(String file)
FileRecord5 p = null;
int index = -1;
boolean found = false;
int i = 0;
while (!found && (i < nextEmptyRow))
p = (FileRecord5)data.elementAt(i);
if (p.file.equals(file))
found = true;
index = i;
} else
i++;
if (found)
data.removeElementAt(i);
nextEmptyRow--;
numRows--;
fireTableRowsDeleted(START_NUM_ROWS, numRows);
}

Preloader for dynamic data

I have a script and I can't figure out how to trigger the
preloader when the external files load
Here is my script

If your XML is that large it creates a delay then use the
example for
XML.getBytesLoaded
(XML.getBytesLoaded method).

Variable substitution for Dynamic filename

Hi All,
my Scenario is Proxy to file. and the receiver file should be a zip file of extension .dat.gz.
In mapping I tried as below. In signature I used one sender and two receiver messages.
SENDER:                         RECEIVER:(2messages)
MT_Product                       MT_Product
-----Row                              ---------Row
---------field1                         -----------field1
---------field2                         -----------field2
---------field3                         -----------field3
                                         MT_Poduct_1
                                           --------field5
for field5 I mapped current date and I am trying to use it in Reciver file communication channel. will that be correct to use?
In receiver communication channel the file name is Product_%field5%.zip I used
and I used Module Configuration for content conversion and Zipping the file.
In variable substitution I used field5 for dynamic date.
field5-----------
payload:Messages,1,Message2,1,MT_Product_1,1,field5,1
Module Confuguration:
Guys! am on right path????? will this be possible????

Hello,
Why you are using multimapping? Just for defining target file name using var substitution - BTW, that too is incorrect. You cannot use Messages/Message 1 nodes in variable substitution.
Secondly, if I am not wrong the approach of defining dynamic zip file name using variable substitution won’t work because variable substitution will be executed once all the modules before standard call sap adapter gets executed. So during runtime, at var substitution step, ur file will actually be a text file instead of XML as a result u will get an exception.
So, if there is no specific objective of using multimapping then simply use DC.
Thanks
Amit Srivastava

Downloading dynamic data without a server roundtrip?

Is there a way to get a FileReference.download like
experience for dynamic data? I've tried feeding a data: url into
download, which seemingly triggered a bug as I got a save dialog
and a true return value from download(), but no data was ever
saved. I'm running out of ideas and would greatly appreciate any
help.

Uhh... after some more reading... is this even possible WITH
a roundtrip? Seems like Flash can't POST and download at the same
time... unfortunately, I'm talking about images here... maybe a
megabyte or more. I can't just append them to the URL as GET
parameters. And if I use send, I won't be able to offer the return
for download, which is the whole point.
The only way I see right now is encoding as string and
posting it via an IFRAME, but that's not a terribly good idea
either with a lot of data posted back and forth between the browser
and Flash

Using htp.p for print dynamic data in apex region make my page slow?

Hi, everyone!!! My name is Rafael, and...
I search in the web and in this forum but i can´t find a answer for my doubt.
Using the procedure htp.p for print dynamic data in apex region through on demand process , this will leave my webpage slow to load when the user access?
Example:
For build a menu in my webpage, it´s read a function in the database that returns variable string, so by a demand process this string is obtain and print in a web page using htp.p.
I notice that this practice causes slow to load the data on the page.
This is it...
If someone help me, thanks...
bye and Happy new Year!!!
Edited by: user9518141 on 26/12/2009 17:19

Hi,
Try commenting out the function call and print some sample text in the htp.p like htp.p('Hello world..');
I think the function call is probably taking a lot of time .. not htp.p.
I have used htp.p to print out values dynamically in a lot of situations and have not ever come across any performance issues.It could be a problem with the function you are calling.
Thanks,
Rajesh.

How do you save dynamic data type, from the DAQ assistant, for use in Excel or matlab?

Currently, I have the following basic VI setup to save Data from my PCI6221 Data Aquisition Card. The problem I'm having is I keep getting the last iteration of the while loop in the measurement file and that's pretty much it. When I try to index the data leaving the loop it gives me a 2D array of Data which cannot be input into the "Write to Measurement File" VI. How would I save this to a useful Data/time step format? I was wondering of a way to continuously collect the Data and then save it in a large measurement file that I would manipulate in Matlab/excel? Am I using the wrong type of loop for this application? I also noticed my Dynamic Data array consists of data, time, timestep and then a vector of the data taken. Is it possible to just get a vector of the time change per sample alongside the data? Sorry for the barrage of questions but any help would be greatly appreciated, and thanks in advance!
-Bryan
Attachments:
basic DAQ.vi ‏120 KB

There is a VI in the Express > Signal Manipulation palette called "From DDT" that lets you convert from the Dynamic Data Type to other data types that are more compatible with operations like File I/O....for instance, you could convert your DDT into a 2D array and use the Write To Spreadsheet File.vi. Just a thought...
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Dynamic Date Calculation for Current Date - 1

I am trying to create a variant with a dynamic date calculation attribute.
I am following the instructions as they are posted to the web but I get an error message.
I want to get all data EQ to the current date -1
In the object for selection screen I enter a D for Selection Variable, for Name of Variable I enter an I to include specific values and the option EQ for current date +/- ??? days. Then I enter 1- for the number of days. I have tried to enter this many times and in many ways but it doesn't work. I keep getting this message "lower limit of interval is greater than upper limit"

Hi,
Welcome to SDN.
Selection-screen has four values -
SIGN
OPTION
LOW
HIGH
Pass your date value in the option low for the screen.
Sign you have already pass as I and option as EQ.
Regard,
Amit
Reward all helpful replies.
Can you paste your code here.
Message was edited by:
Amit Khare

Alternatives to dynamic tables for displaying dynamic data

What methods are available for displaying data from MySQL
with PHP on a web page? Is there any alternative to a dynamic table
when the the quantity of data will vary? anything CSS based?
Many Thanks

On 27 May 2006 in macromedia.dreamweaver, Pingus mum wrote:
> so i could just output to a div for example?
Or a paragraph, or an <h4>, or an unordered list, or
any other container
tag, or the src attribute on an <img> tag, or any
combination of the
above. Consider the case where the database consists of press
releases -
date, headline, body. You could, say, make the repeat region
like this:
<h1>Press Releases</h1>

<h2><& headlineFromDatabase &></h2>
<p><& dateFromDatabase &> - <&
bodyFromDatabase &></p>

<address>Contact Information</address>
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/email.php

How to configure Dynamic Data Connection for Business View

Hi,
How can we configure Dynamic Data connection that we can save the profile of the connection to somewhere that we do not need to enter it everytime when we refresh the report?
thanks and regards
nora

Hi James,
Thanks for the reply. Its solved now. For anybody if interested you can set the dynamic email address either i) having it as part of payload - In this case use the xpath to query the payload varaible ii) use identity service - follow the following steps
1.Create a user in Application enterprise manager/also you can use a existing account, if u are creating a new one assign the correct role
2. In either case edit the user-properties.xml(bpel/system/services/config) file for the corresponding user and add an attribute called email
3. Bounce the server for this changes to take effect
4. In the notification properties in the to address use ids:getUserProperty and pass the attribute name

Dynamic Date Variant for SAP Job

Hi Guru
We have a program to be ran in the Background .
I am unable to create a Variant for Date ( Current year Jan 01st to Current Date).
Could you please advice how to create a Variant with Dynamic Date Calculation for above date range.
Thanks in Advance.
Thanks
Ravi

Hi,
I guess that you know how manage dynamic dates in a variant. (Please, tell me if you need help about it)
You can try with two DATUM type fields in the ABAP program. Fix the first one with a fixed date u201901.01.2009u2019 and the second one will be fixed with the dynamic date u2018Current Dateu2019
Regards,
OLA

How do i convert dynamic data for TCP transmission?

I am doing a university reaseach project which will gather field data in a remote location (with a phone line), and i want to transmit this data back to the lab for recording and analysis. I have loaded the simple data server and client vi's, but cannot get my data into a suitable form for transmission. The data is aquired through a daq pad and displays on a waveform graph as well as writing to file. The output from the daq pad is dynamic data, and this is what i want to transmit...... any ideas. thanks Jack

Hi Jack,
try it in this way.
Mike
Attachments:
Unbenannt.PNG ‏13 KB

Internationalization for dynamic data

Similar Messages

Maybe you are looking for