Internet access to the guest system for Host-Only configuration

Hello,
I have a windows host linux guest vBox environment and it's configured as host-only. How can I enable internet access within the guest? I am towards the end of a RAC installation and upon running buildcluster.sh, it says the recommended RPM "oracle-validated" not installed or has unsatisfied dependencies. It seems i have quite a few RPMs need to download and thus prefer to be able to connect to the internet within the guest so i can do it from the Oracle yum server.
Thanks,
Harry

Hi,
this won't work so easiliy with a "Host Only" network.
You either need a bridges network or a NAT network.
Easiest thing probably will be to add another interface (network) to the VM and assigned it as bridged.
Then download/update oracle-validated and remove the interface again.
This way, you don't need to change anything on the server.
Regards
Sebastian

Similar Messages

Is it possible to be connected with a 3G modem for internet access and a WiFi router for printer sharing at the same time?

For our only internet access we have a 3G wireless modem. I have since purchased a WiFi printer and router to connect all the comptuters to in the house. The PCs have no problem with using both the 3G connection and the WiFi signal at the same time to print, however, the MacBook Pro will not connect to the 3G network and the router, it will drop the internet access from the modem and attempt to connect via WiFi (which has no internet access). Is there a solution that is available to remedy this? I attempted to create an adhoc printer network, however, the macbooks again will not print off of this, only the PCs. And I'm getting a bit frustrated overall with this.

The 3G wireless modem is on one of the PC's correct?
Why don't you pass the Internet through the Ethernet port to the router via Cat5 cable, then have that transmit a Wifi signal that everything else can use, then connect the printer to the router for print sharing?
You would have to turn off the wifi on the comptuer with the 3G modem as it's physically connected to the router and can't connect to the other machines as they are all connected to the router for sharing.
The Mac has the ability to pass, Internet Sharing in the System Preferences.
Do you have software for the Mac to run the 3G modem?

Enable responses from 2 separate internet connections on the same system

Hello List
I am hoping one of the network gurus here can help me out. I've spent quite a few hours trawling these forums and others online to try to find the answer to my question, but success has not been forthcoming.
My situation is this. I have a system that functions as a server that is connected to two separate internet connections. The G5 tower is hooked up to each via Ethernet. Each connection has a manually configured connection with a fixed IP. The gateways for each are using different IP ranges, the IP for en0 is 10.0.1.59 and en2's IP is 192.168.1.145. They each have different gateways configured as well, 10.0.1.1 and 192.168.1.1 respectively. 192.168.1.145 is the DMZ system for that internet connection. Here is the default entry in the system's routing table:
Destination Gateway Flags Refs Use Netif Expire
default 10.0.1.1 UGSc 4 8 en0
I need both interfaces to reply to requests to their public IPs backthrough the correct gateway and not the default gateway. This is because of bandwidth constraints and the need to perform nightly backups of substantial amounts of data from our business hour VOIP connection, but allow the existing default gateway to remain first in the network service order list.
I have thus far tried the following based on what I could learn from this and other forums across the Web. I have enabled forwarding with the following command:
sudo sysctl -w net.inet.ip.forwarding=1
Then I have applied a fwd rule to ipfw that purports to route requests made to the en2 local address back through the correct gateway:
sudo ipfw add fwd 192.168.1.1 ip from 192.168.1.145 to not 192.168.1.145 out
However, this does not work and there is no response from en2 gateway when trying to access the system from that gateway's public IP.
Can anyone see something obvious that I'm missing or point me at an online resource that will let me figure out how to get this working?
Many thanks in advance.

I sounds like what you need is a static route to the IP address of whatever is on the other end of the Retrospect request. The command would look something like this:
sudo route -n add -host host_address -gateway router_address
where host_address is the IP address of whatever the Retrospect request is going to, and router_address is the gateway you want it to go out of.
A caveat here is that the route entry does not survive a reboot, so you'd want to create a startup item, or preferably a launch daemon to do this for you automatically on startup.

Enable responses from 2 internet gateways on the same system

Hello
I tried this question in the Tiger Networking forum but didn't get a response so I'm giving it a shot here.
I am hoping one of the network gurus here can help me out. I've spent quite a few hours trawling these forums and others online to try to find the answer to my question, but success has not been forthcoming.
My situation is this. I have a system that functions as a server that is connected to two separate internet connections. The G5 tower is hooked up to each via Ethernet. Each connection has a manually configured connection with a fixed IP. The gateways for each are using different IP ranges, the IP for en0 is 10.0.1.59 and en2's IP is 192.168.1.145. They each have different gateways configured as well, 10.0.1.1 and 192.168.1.1 respectively. 192.168.1.145 is the DMZ system for that internet connection. Here is the default entry in the system's routing table:
Destination Gateway Flags Refs Use Netif Expire
default 10.0.1.1 UGSc 4 8 en0
I need both interfaces to reply to requests to their public IPs backthrough the correct gateway and not the default gateway. This is because of bandwidth constraints and the need to perform nightly backups of substantial amounts of data from our business hour VOIP connection, but allow the existing default gateway to remain first in the network service order list.
I have thus far tried the following based on what I could learn from this and other forums across the Web. I have enabled forwarding with the following command:
sudo sysctl -w net.inet.ip.forwarding=1
Then I have applied a fwd rule to ipfw that purports to route requests made to the en2 local address back through the correct gateway:
sudo ipfw add fwd 192.168.1.1 ip from 192.168.1.145 to not 192.168.1.145 out
However, this does not work and there is no response from the en2 gateway when trying to access the system from that gateway's public IP.
Can anyone see something obvious that I'm missing or point me at an online resource that will let me figure out how to get this working?
Many thanks in advance.

I sounds like what you need is a static route to the IP address of whatever is on the other end of the Retrospect request. The command would look something like this:
sudo route -n add -host host_address -gateway router_address
where host_address is the IP address of whatever the Retrospect request is going to, and router_address is the gateway you want it to go out of.
A caveat here is that the route entry does not survive a reboot, so you'd want to create a startup item, or preferably a launch daemon to do this for you automatically on startup.

Can anyone tell me how I keep everything I had in my old photoshop, now I've updated to Photoshop CC 2014. It did give me the option to transport over all my presets, but because I didn't have internet access at the time, it couldn't do it. Now I'm not

Can anyone tell me how I keep everything I had in my old photoshop, now I've updated to Photoshop CC 2014. It did give me the option to transport over all my presets, but because I didn't have internet access at the time, it couldn't do it. Now I'm not getting the option. Please help.

Migrating Presets does not require a network connection and you can still migrate your cc presets if you still have CC installed. Use Photoshop menu Edit>Presets>Migrate Presets... Migrating presets only migrates presets. It does not migrate Plugins, settings, extensions and scripts. CC 2014 is also not completely backwards compatible with CC. Support for Flash Panels and Oil Painter filter have been removed. So extensions like mini bridge no longer work in CC 2014

Java daemon on boot: "This user is not allowed access to the window system right now."

The daemon is located in /Library/LaunchDaemons/ and launches successfully on most occasions. However, it sometimes fails to start with this error:
Nov 17 20:36:24 server.local java[28972]: This user is not allowed access to the window system right now.
Nov 17 20:36:24 server com.apple.launchd[1] (net.java.server): Throttling respawn: Will start in 10 seconds
I have the server command running as a background daemon using its "nogui" option (the developers claim to have written it to not display a gui). However, it seems that somewhere along the line, Java is trying to display something. As the daemon is running before users log in, it gives this error. Once a user is logged in to the system, it runs fine; however, logging in a user to run the server is not an option. It needs to run on boot.
Any ideas for how to solve this? I'm going to contact the developers to see if it may be something they can fix, but I want to be able to force the issue in case the problem ever occurs in the future.

Irrespective of any claims by the developer, this certainly appears to be a test case that shows that the tool is not working as expected, and that the application has a bug. This test case would be better if there was some evidence around why only some of the startups fail, but in general this will involve what's been suggested earlier: "Contact the application developer."
As some general background on what's involved, see daemons and agents and related; processes that are not allowed to connect to the GUI for reasons of security.
I'd also suggest testing your DNS, as seeing "server.local" can imply local DNS configuration errors. Launch Terminal.app from Applications > Utilities and issue the following harmless diagnostic command and see if it reports no changes, or if it detects network or DNS errors:
sudo changeip -checkhostname
If this is OS X Server and a NAT'd network, you do not want to reference any DNS servers located off of your NAT'd network.
Why DNS? Because DNS errors can cause only some operations to fail, particularly if there's more than one DNS server selected (and where some subset of the DNS servers are malfunctioning or misconfigured).

Unable to set the ip address for hosted network client after creating WIFI hotspot

Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
HI all
I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
but the problem I am facing is slight different
I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
as soon as I close the window, the ip address also disappears
when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
so what cause the failure in internet connectivity but success in hotspot connectivity?
check the screen shots...
can u help me..
its little complicated

Hi,
Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
Roger Lu
TechNet Community Support

Can I use my iPhone to have internet access on the iPad?

Can I use my iPhone to have internet access on the iPad?

Yes, but you have to have your phone set up for tethering. Depending on your carrier that might require a special plan.

How many ghz should I get if I plan on using my IPAD2 for internet access, email, facebook and games for my children?

How many ghz should I get if I plan on using my IPad2 for internet access, email, facebook and games for my daughters children?

Ghz is the CPU speed and that is fixed for each iPad model.
The GB is the number of Gigabytes of storage.
I had a 32G iPad1 and filled it up with 5000 songs, 20,000 photos and about 50 apps. It doesn't sound like you will need anything larger than that. If you are just talking about a few dozen apps and email, the 16G version should be adequate.

Is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't

is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't

It the same phone but you don't have to have data on it if you don't want since they are older phones. We had these phones without data as I didn't think they would be good for surfing the net compared to a smart phone. Mary

Your account does not have access to the forums system.

Greetings, My name is Jeff, I'm from Netwrix Corporation, which is a Microsoft partner. I have a problem with accessing Microsoft TechNet forum. After signing-in to my account: [email protected], I go to TechNet
forum, and get a message that: "Your account does not have access to the forums system." And also I've noticed that all my posts were deleted from TechNet forums. Can moderators tell me why did that happen? Why didn't I receive any warning
about my account suspension?
I've already submitted 2 tickets to MSDN Site Feedback Inquiry but didn't receive any answer.
I've called Microsoft TechNet at 800-344-2121 and Professional
Support team at 1-800-936-5800. But everybody send me to the MSDN Site Feedback Inquiry from which I didn't get any answer.
Anybody can help me with my problem?

Hi,
Is this the profile you're referencing?
http://social.technet.microsoft.com/Profile/netwrix
It doesn't appear to be banned, but you're definitely right about there being no activity listed.
I'd suggest contacting the forums team directly by sending an email to fissues (at) microsoft [dot] com. The admins do monitor this forum, so you'll probably get a response here as well.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

How does one add a personal recorded M4R file to the ring tones in the UK system for iPhone 3GS

How does one add a personal recorded M4R file to the ring tones in the UK system for iPhone 3GS.
I have tried all sorts of ways of adding my personal M4R file but can't find the place (within the UK versions of iTunes} to transfer this file so that I can select it as a ring tone.
I've tried also changing to the US version of iTunes and still can't find a way of doing it, although I have heard that it can be done.

You should be able to just drop it into the library within iTunes.
http://cnettv.cnet.com/create-free-iphone-ringtones-using-itunes-8-0/9742-1_53-5 0003920.html
Check out the video above for a lot good info. The ringtone must be less than 35 seconds.

Lookout limitations and selection of the computer system for lookout

This is regarding the limitation of the lookout i.e. upto how much IO lookout is reccomended to use.
or it is on the basis of the l4p or lks file size basis.
Do you have some criteria for the selection of the computer system for lookout on the basis of the IO's.
is there any criteria by which we can check the execution cycle time for the lookout process.
Is there any NI controller also avaiable for lookout applications?

From what I have observed, there is no standard. The best thing to do is to create test setups.
Its entirely possible that a system with 100 IO may require more processing/memory than a 5000 IO system. Database, archiving, reporting, analytics, etc.
It is variable.
Just for reference on our systems, we dont use the IO count for performance curves, we go based on the site configurations for the system.
A site could be 1 pump, 6 pumps and a tank, 1 pump and a tank, 4 tanks, etc. Consider than a tank may only take 5 IO and a well upwards of 50 IO each, we could hit 150-200 IO per site.
Smaller systems (<10 sites) we have run very successfully on Atom based servers (not netbooks...).
10-40 sites run well on basic dual-core workstations with 2GB or more of RAM
40-100 we recommend quad-core servers with 4GB or more of RAM.
(100+ gets a little more intricate)
We try to make sure that the system is not more than 15% loaded (memory and/or CPU) by services at normal work. Lots of room left over for future growth or unexpected workloads and backup routines.
Forshock - Consult.Develop.Solve.

Best $3K off the shelf system for CS5??

for us newbies...what
would be the Best $3K off the shelf system for CS5??
thx

ok...dell and hp steal
you blind on necessary upgrades...is the customer support and "security" offered by
them a good enough trade off with the "build it yourself/have it custom built" danger of not knowing what to do if/when things go wrong?
i am just looking to do low level (but high quality) professionasl stuff...i.e. budget weddings/training/memorials/recitals etc. and feel i am not far enough along on the high tech learning curve...but moving as fast as i can.
ALSO...and maybe this is another conversation...but:
is the miniDV tape (for SD and HDV) about over now and are we comletely into the "tapeless" video era?
thanks for all your help.

TS3988 I switched ISP so no longer have access to the email address for my iCloud account how do I change it. Why isn't it as easy as changing my Apple ID.?

I switched ISP so no longer have access to the email address for my iCloud account how do I change it. Why isn't it as easy as changing my Apple ID.?

Hi dawn192,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the links to see more details and screenshots.
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Apple ID: Changing your Apple ID
http://support.apple.com/kb/HT5621?viewlocale=en_US
Cheers,
- Judy

Internet access to the guest system for Host-Only configuration

Similar Messages

Maybe you are looking for