Internet connection problems with OSX 10.10.3

Does anyone else have very bad Internet connection problems after downloading OSX 10.101.3? Does anyone have a solution? P.S. What do you think of PHOTOS, after Aperture?

1, No problems here with internet on 10.10.3
2, No solution
3, I think that Photos is a toy. Apple has basically neutered both Aperture and iPhotos with their efforts to make their desktop solution match the iOS solution.
I am currently looking for a non-Apple solution for my photographic needs since Photos in no way shape or form is able to fill my needs.

Similar Messages

Internet connection problem with MacPro, only. PC fine

I have a Netgear 600n. My notebooks, Vista PC and MacPro, are connected to it. There is no connection problem with the PC, but there is with the MacPro. Weekly, I have to delete the "system configuration file," or it keeps dropping the connection. I heard it had to do with Windows configuring the netgear router. is this true and is there a solution. I use the PC and the Mac at the same desk, so there is no location issue.
Thanks!!

Some operators block the option to use your phone as a modem, as this will use up a lot of data. It might be worth checking your contract to see if it mentions anything about data use, or give your operator a call to see if they have any limitations.
Please try to use the phone with a different SIM card to see if this is related to your operator after all, or if it's something else. If it doesn't work with a different SIM card either, try the following to see if the issue lies in Nokia Suite or in the phone itself:
Install Nokia Suite on a different computer or laptop and check if you can use your phone as a modem on that computer. If this works, try reinstalling Nokia Suite on your current computer and see if this makes a difference.
If this doesn't work, try connecting a different Nokia device to Nokia Suite and try to use it as a modem. If you can connect a different phone with your SIM card to the modem but connecting with yout 6700 Classic fails, then please visit a local care centre where your phone can be checked on any errors.
You can find a care centre by going to your local Nokia web page and clicking on Support.
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

ASA 5505 - 2 Internet Connections, Problems with the Default Route

Hey there,
i have a Problem at a Customer Site at the moment. The customer uses an ASA 5505 with two internet connections attached to it. On the first connection (which is the only one in use at the moment) he has some Static-PAT's from Outside to Inside where he translates different services to the internal servers. He also has a site-2-site VPN terminating there and AnyConnect.
He now wants to switch the Internet Traffic from Inside to the new Internet Connection. Therefore changing the default route to that new ISPs Gateway. The problem now is, that no traffic recieved on the old "outside" Interface is transmitted back out of that old "outside" Interface. And this happens although the "same-security permit intra-interface" command is set.
Can you tell me what's wrong here? For every Static-PAT from outside to inside there is also a dynamic PAT from inside to outside. But the ASA seems to ignore this. I have not looked into the Logs yet, was too busy finding the problem because i had no real time window to test on the productive ASA.
Can it be achieved in any way? Having a default route on the ASA which leads any traffic to the second internet connection while still having connections on the first internet connection where no explicit route can be set? Because connections arrive from random IPs?
Many thanks for your help in advance!
Steffen

Phillip, indeed , I have as well read may comments,it all depends on your environment as they all differ from one another, you best bet is to have a good solid plan for upgrade and fall back. You do have a justification to upgrade for features needed, so I would suggest the following:
1- Do a search again in forum for ASA code upgrades and look at comments from users that have gone through this process and note their impact in fuctionality if any. I believe this is good resource to collect information .
2- Very important , look into release notes for a particular version. For example version 8.0, look into open CAVEATS usually at the end of the link page, reading the open bugs gives you clues what has not yet been resolved for that particular code and if in fact could impact you in your environment, it is possible that a particular bug does not realy apply to your environment becuase you have yet not implemented that particualr configuration. Usually we all try to aim towards a GD (General Deployment) code which is what we all understand is most stable but not necesarily means you have to be stack in that code waiting for another GD release, in my personal experience I have upgraded our firewall from 7.2 to 8.0(3) long ago and had no issues, and recently upgraded to 8.0(4)when it was first release in August this year.
Release notes
http://www.cisco.com/en/US/products/ps6120/prod_release_notes_list.html
3- AS a good practice precaution -
a-Backup firewall configs in clear text as well as via tftp code.
b-Backup running code and ASDM version code currently running in firewall.
c- Save the output of " show version " to have as reference for all the feature licenses you currently have running as asll as activation keys - good info to have to compare with after upgrade.
d- Ensure that the code you will be using to upgrade also uses correct ASDM version code.
I think with thorough assesment and preparation you can indeed minimize impact.
Rgds
Jorge

Another Internet connection problem with solariis dev express

I have the same problem, i was installed new solaris dev express , my ifconfig output detects my nic
and my name nic is nge0, but i dont connect to internet.
i was reading this forums but the result is null.
i have a cable modem and i using a ethernet connection.
i use this command:
*#ifconfig nge0 dhcp start*
the result is null the dhcp doesnt assing an ip to my nic
then i create a */etc/hostname.nge0* file and follow comments that i seeing on this forums
*#uname -n > /etc/hostname.nge0* ...too i create a */etc/dhcp.nge0*
again i wrote:
*#ifconfig nge0 dhcp start*
but no , the result is null
then i follow more comments on this solaris forums and i added the dns in */etc/resolv.conf*
but the result still null
later i check the gateway using the comand
*#netstat -nr*
but only i see my loopback ip --> 127.0.0.1
too i used the command
*#sys-unconfig* , reboot ..mmm no
but still the same problem
my question is how to set the internet connection using a cable modem that workkssss!!!!!!!?
my computer is a 32bit machine with solaris devexpress and my cable modem.
how to tell to solaris which is my gateway?
i know that the command in my linux box is: route add default gw ip
what i have to do?
i modify a */etc/nsswitch.conf* and i added a dns word after files in hosts line.
create a */etc/defaultrouter* <-- this is to when i have a internal lan ip
in the */etc/hostname.nge0* put only my hostname
*/etc/hostname.nge0* <-- myhostname
or
*/etc/hostname.nge0* <-- inet myhostname
what is true? what is correct? i wsas reading about solaris offical docs about dhcpagent but i dont have clear my ideas.
please someone that you know how to set the internet connection on solaris dev exprres using the dhcp that serves on cable modem.
i dont believe that be more complicated than Linux or FreeBSD
Thanks.

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
(OPTIONAL) While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

Having internet connection problem with a new Actiontec GT794WG

I am currently using Westell 327w which works completely fine. Its internet light comes on after few seconds the DSL light becomes solid. I am trying to change it to GT794WG, because I have been using 327w about 4 years.
By the way, I am having a connection difficulty with my new GT794WG modem.
Although I connect every necessary cables such as DSL, Ethernet cables and turn it on, an internet light on the modem does not flash. There is no problem with DSL light. It becomes solid after few blinking. Only problem is the internet light. I know that it refers that the modem can not connect with the internet.
I don't understand why the new modem can't connect to the internet which my old modem can?
Can anyone help me solve this problem?

Ok.
#1 For your info, there a certain amount of time that you can re-edit your post.
A time limit of at least 2 hours.
#2 Why do you want to replace your Westell 327w with the newer router? That is if there is any other reason besides, you have been using it for four years..
Moving along...
#3 In the Westell 327w, go to Configuration -> VC Configuration
#4 There are different settings there, as I saw at
https://docs.google.com/viewer?url=http://www.westell.com/images/pdf/e90_6000_6100_6110_ug.pdf&embed...
on page 46 out of 146 pages.
#5 What is 0 VPI / 35 VCI set to?
#6 Notes:
a) In the manual/user guide (that docs.google.com URL) the connection type is PPPoE.
b) If 0 VPI / 35 VCI is set to Disabled, what ever the enabled for example 0 VPI / 36 VCI.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Internet Connection problems with WRT54GS

I purchased this router to go online with my Wii and my PS3. Extremely easy set up right out of the box and both systems were online within the hour. However the router seems to be freezing up my internet connection. Every 6 hours or so the lights on the front of the router freeze up and I can't access any websites. I spoke to a guy at work who used to set up networks and he told me to unplug it for 30 seconds and plug it back in. This seems to fix the problem and get me back online for about 6 hours. It's not terrible, but it is kind of annoying to have to do this a couple of times a day. It especially annoys the other people in my house (wife, kids) more than it does me. They're used to having uniterrupted, fast internet service. By the way I have DSL through ATT with never any problems before this. Any suggestions?

I attempted to do this but when I get to the downloads section of linksys and input the model and type of my router and then click on firmware I get a window that comes up saying that it is a binary data file and no known program will open it. If it attempt to save the file I can't open it anyway. Any way around this?

Internet connection problem with Creative Cloud

When I try to download a trial of Photoshop via Creative Cloud I continuously get an error message of no Internet connection (This is not the case). Can anybody help

paulmoynagh,
Solution #1
Check the 'hosts" file for adobe entries. if you could see adobe entries there follow the below mentioned steps.
1. Go to the 'Hosts' file location.
WIN : C:\Windows\System32\drivers\etc
MAC: Go to finder menu on the top > go to folders > type '/etc', hit return.
2. move the hosts file to the desktop.
3. Open it.
WIN: open it with notepad.
MAC: double click it.
4. Delete all the adobe entries, as they are blocking your machine to connect to Adobe Activation Server.
5. Move it back to '/etc' folder.
Solution # 2
1. Check if you are working under any sort of firewall (system/network) / proxy.
2. Disable firewall / proxy.
Solution #3 (Should work)
Go for deployment : http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html.
if nothing works, contact Adobe Tech support at : http://helpx.adobe.com/support.html
Regards,
Atul Saini

Internet connection problems with macbook pro

why does my mac book pro keep dropping the internet? When I go into diagnostics it says the ips, internet and server have failed but if I restart the computer it will connect again. i have spoken to my internet provider and replaced my router which seemed to temporarily fix the problem.

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 5
Reset the System Management Controller.
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

Internet connectivity problems with Macbook Pro, mid 2012.

I have a Macbook Pro, mid 2012, running OS 10.8.5. My able to access the Internet is intermittent, both with Ethernet or Wifi. When I check Network settings, it indicates that I am connected, even though I cannot access the Internet. I have to restart the compute to gain access again, which doesn't last. I've taken it to the local Apple Store. They ran thorough diangostics tests which found no hardware problems. I have done complete clean reinstalls of the OS as well. I also have frequent Kernel Panic restarts. I have no problems connecting through my router for my Imac via Ethernet, and wirelessly for a Windows laptop and smartphones and iPod. Any suggstions out there?

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Lenovo p780 internet connectivity problem with whatsapp

Dear Sir
Two days ago I got Lenovo P780 mobile in india.
my model number is P780_ROW
android : 4.2.1
baseband version : P780.V20
BUILD NUMBER 780_8G_ROW_S118_130816
I have 2g mobile connection from vodafone. I can see it is connected to internet, am able to login in google play store, facebook but when I start whatsapp, it just cant connect to network?
What can be problem? Shall I upgrade my firmware?
Thanks
Krushna
Solved!
Go to Solution.

Anuj, so you are saying that I am able to browse net and do other stuff on the internet and still my APN settings are not correct?
What you suggested is for Vodafone. What about Airtel? Kindly confirm. Thank you.
EDITED VERSION:
Anuj, thank you very much. It has started working fine with Vodafone Connect. Lenovo could be a little proactive in forums like these. I was just at the verge of returning this phone. Thank you once again.

Internet connection problem with a linksys router

first of all i tried the solution on this topic http://discussions.apple.com/thread.jspa?messageID=1573174

first of all i tried the solution on this topic
http://discussions.apple.com/thread.jspa?messageID=157
3174
it worked fine, i used the "" on the WEP key and now
i got a successful connection to the router.
Does the iMac have a valid IP address ie not a 169.x.x.x style address?
But
still, i cant connect to the internet...
If you have a valid IP address
In a browser try http://17.254.0.91
and report back
do i, under
any circumstance, need an airport base station?
No
iFelix

Internet Connection Problem with WRT-54GL

Hi there Folks, I recently bought a Linksys AG-241 gateway and a WRT-54GL Wireless Router. The Gateway works seamlessly by itself through my laptop, but now that I have got all of the glitches worked out in the Intel Wireless card in my Dell Inspiron laptop and finally got the thing to work and receive a signal from the W/Router, I find I can't access the internet (or at least can't load any pages, once I'm past the set-up page). The Gateway has an IP addy of 192.168.1.1 and the Router has an IP address of 192.168.2.1. What on earth have I mucked up this time?. If you need any more info, please by all means ask. I was really stoked that the wireless card finally works, and now this has bought me back down to earth. Any help you guys can give me would be most gratefully recieved. Cheers, Mike.

hi try changing routers IP to 10.10.10.1, also try reducing MTU to 1452...check whether it makes any differnce or not.

OSX Mavericks having internet connection problems.

Just updated to OSX Mavericks on my early 2011 MacBook Pro, and it's having internet connection problems. I'm using wi-fi, and so far only Firefox and Mail will connect. All other programs (such as iTunes and App Store) won't establish a connection. This is a problem that only started after I installed Mavericks. What can I do to fix this? Thanks in advance.

App Store / iTunes Store relies on Safari settings if you can't access secure sites from Safari then they won't work... Reset Safari and make sure Block Cookies Setting is not set to Always. You can also try to create a new user and see if it works there to help isolate the issue.

Has anyone experienced internet connection problems through Comcast after taking a recent Apple security download?

Has anyone experienced internet connection problems through Comcast after taking a recent security update download from Apple??

Hello jessie029, and a warm welcome to the forums!
What browser do you connect with?
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then Open System Preferences>Network>Configure>Proxies Tab, make sure none are set, like for HTTP & HTTPS to use at Home, if you use it at 2 locations, just make a New Location for home.
Make a New Location, Using network locations in Mac OS X ...
http://docs.info.apple.com/article.html?artnum=106653
Then try putting these numbers in Network>TCP/IP>DNS Servers for the Interface you're using...
208.67.222.222
208.67.220.220
Then Apply. These are safer/faster than most ISP's DNS numbers, and have been patched against DNS poisoning.
https://www.opendns.com/homenetwork/start/device/apple-osx-tige
How to Flush DNS in Mac OSX using the Terminal.
In Mac OSX versions 10.5.1 and before, the command lookupd -flushcache performs this task:
lookupd -flushcache
Reboot.

Connection problems with Mail 6.2

Is anyone else having connection problems with Mail 6.2? I'm running OSX 10.8.2 and Mail 6.2 (1499)?
When Mail starts all my mailboxes connect to their respective servers (GMail, iCloud and an ISP). IMAP and SMTP connections are all good and mails can be sent and received. But then............ after a while (I've not timed it so I don't know exactly but say 20 to 30 mins) the connections begin to drop. First the SMTP connections to the ISP go then the SMTP ones to GMail then iCloud, then the IMAP connections drop. All connection settings are correct (it was working remember) and using the same connection settings on my iPhone everythig works just fine, but the Connection Doctor (Or whatever it's called) tells me that the mail account can't connect to the network/IMAP/SMTP server and asks me to check my connection settings. The only way to get it to work is to close Mail and restart it, whereupon everything is hunky dory for the next 20 to 30 mins.
As it's happening to all my mail accounts including Apple's own iCloud server I don't think it's a mail server issue. As I have internet connectivity it's not a network connection issue in that sense. As it was connected but then drops the connection I'm assuming that Mail is sending something it shouldn't to the respective server when it tries to connect to send and receive mails.
Everything was just fine until about a week ago and I didn't do any s/ware upgrades.
Is anyone else experiencing similar issues or does anyone have any help they can offer to fix it? It's kinda tedious to keep closing and starting the Mail App.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Internet connection problems with OSX 10.10.3

Similar Messages

Maybe you are looking for