Internet connection problem with a linksys router

first of all i tried the solution on this topic http://discussions.apple.com/thread.jspa?messageID=1573174

first of all i tried the solution on this topic
http://discussions.apple.com/thread.jspa?messageID=157
3174
it worked fine, i used the "" on the WEP key and now
i got a successful connection to the router.
Does the iMac have a valid IP address ie not a 169.x.x.x style address?
But
still, i cant connect to the internet...
If you have a valid IP address
In a browser try http://17.254.0.91
and report back
do i, under
any circumstance, need an airport base station?
No
iFelix

Similar Messages

ASA 5505 - 2 Internet Connections, Problems with the Default Route

Hey there,
i have a Problem at a Customer Site at the moment. The customer uses an ASA 5505 with two internet connections attached to it. On the first connection (which is the only one in use at the moment) he has some Static-PAT's from Outside to Inside where he translates different services to the internal servers. He also has a site-2-site VPN terminating there and AnyConnect.
He now wants to switch the Internet Traffic from Inside to the new Internet Connection. Therefore changing the default route to that new ISPs Gateway. The problem now is, that no traffic recieved on the old "outside" Interface is transmitted back out of that old "outside" Interface. And this happens although the "same-security permit intra-interface" command is set.
Can you tell me what's wrong here? For every Static-PAT from outside to inside there is also a dynamic PAT from inside to outside. But the ASA seems to ignore this. I have not looked into the Logs yet, was too busy finding the problem because i had no real time window to test on the productive ASA.
Can it be achieved in any way? Having a default route on the ASA which leads any traffic to the second internet connection while still having connections on the first internet connection where no explicit route can be set? Because connections arrive from random IPs?
Many thanks for your help in advance!
Steffen

Phillip, indeed , I have as well read may comments,it all depends on your environment as they all differ from one another, you best bet is to have a good solid plan for upgrade and fall back. You do have a justification to upgrade for features needed, so I would suggest the following:
1- Do a search again in forum for ASA code upgrades and look at comments from users that have gone through this process and note their impact in fuctionality if any. I believe this is good resource to collect information .
2- Very important , look into release notes for a particular version. For example version 8.0, look into open CAVEATS usually at the end of the link page, reading the open bugs gives you clues what has not yet been resolved for that particular code and if in fact could impact you in your environment, it is possible that a particular bug does not realy apply to your environment becuase you have yet not implemented that particualr configuration. Usually we all try to aim towards a GD (General Deployment) code which is what we all understand is most stable but not necesarily means you have to be stack in that code waiting for another GD release, in my personal experience I have upgraded our firewall from 7.2 to 8.0(3) long ago and had no issues, and recently upgraded to 8.0(4)when it was first release in August this year.
Release notes
http://www.cisco.com/en/US/products/ps6120/prod_release_notes_list.html
3- AS a good practice precaution -
a-Backup firewall configs in clear text as well as via tftp code.
b-Backup running code and ASDM version code currently running in firewall.
c- Save the output of " show version " to have as reference for all the feature licenses you currently have running as asll as activation keys - good info to have to compare with after upgrade.
d- Ensure that the code you will be using to upgrade also uses correct ASDM version code.
I think with thorough assesment and preparation you can indeed minimize impact.
Rgds
Jorge

TS1398 Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation sam

Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation same. Tried reboot, renew lease, forget network, reset network setting. Pls advice

Have you tried a simple reset of your iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

I started to have connectivity issues with a linksys router. The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?

I started to have connectivity issues with a linksys router. The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?

Hi RonWM,
Thanks for visiting Apple Support Communities.
This article lists the ports that are used by the Apple TV:
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Best Regards,
Jeremy

Internet connectivity issues with SA 520W router

Hi,
We have configured Cisco Small Business Pro (SA 520W) in a small office and all computers are connected with wifi. We are facing following problems:
1. Computer is connected with network and 100% signals available but there is no internet. After repairing network from computer or sometimes rebooting computer fix the this problem. What cause internet connectivity problem?
2. Sometimes computer is connected with internet and everything work fine but suddenly there is no internet. May be internet come back again after 2 minutes etc. Strange behavior.
3. Sometime there is no internet connection even after trying all possible tuneing but internet connection become alive again if we reboot router.
All these problems appear randomly on different computers. Can anyone tell what's the reason of all these problems and how can fix it?
Thanks.
Sajjad

I have the just similar problem since few days , for long time I have no issues with wireless router
I have five static IP addresses I am using 1 static IP for the Router and other for the internal use
I though it was my inter provider technical issue,
The internet is working through provider gateway router but not through a Cisco SA520W
some times it works some time it wont resolve host name, internal LAN works perfect ,but internet drops packets and it is very slow
If we dynamically setup the router, it works but not for the static IP address
my old configuration is not saved , reset to factory defaults even then it did not work
I do have 24 port cisco switch when I login there is no gui console just blank blue screen with text boxes
I appreciate some can guide.
I believe we need the update firmware on both devices .I appreciate for the help
Thanks
Ravi

Internet connection problems with OSX 10.10.3

Does anyone else have very bad Internet connection problems after downloading OSX 10.101.3? Does anyone have a solution? P.S. What do you think of PHOTOS, after Aperture?

1, No problems here with internet on 10.10.3
2, No solution
3, I think that Photos is a toy. Apple has basically neutered both Aperture and iPhotos with their efforts to make their desktop solution match the iOS solution.
I am currently looking for a non-Apple solution for my photographic needs since Photos in no way shape or form is able to fill my needs.

Internet connection problem with MacPro, only. PC fine

I have a Netgear 600n. My notebooks, Vista PC and MacPro, are connected to it. There is no connection problem with the PC, but there is with the MacPro. Weekly, I have to delete the "system configuration file," or it keeps dropping the connection. I heard it had to do with Windows configuring the netgear router. is this true and is there a solution. I use the PC and the Mac at the same desk, so there is no location issue.
Thanks!!

Some operators block the option to use your phone as a modem, as this will use up a lot of data. It might be worth checking your contract to see if it mentions anything about data use, or give your operator a call to see if they have any limitations.
Please try to use the phone with a different SIM card to see if this is related to your operator after all, or if it's something else. If it doesn't work with a different SIM card either, try the following to see if the issue lies in Nokia Suite or in the phone itself:
Install Nokia Suite on a different computer or laptop and check if you can use your phone as a modem on that computer. If this works, try reinstalling Nokia Suite on your current computer and see if this makes a difference.
If this doesn't work, try connecting a different Nokia device to Nokia Suite and try to use it as a modem. If you can connect a different phone with your SIM card to the modem but connecting with yout 6700 Classic fails, then please visit a local care centre where your phone can be checked on any errors.
You can find a care centre by going to your local Nokia web page and clicking on Support.
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

I have Connection Problems with the Linksys WRT400N Router!

I bought the Linksys WRT400N Dual Band Router in January 2010, and had nothing but problems with it keeping renewing the IP Address for the internet. I have Road Runner High Speed Cable Internet, and they can’t help me with this support, I tried to call Linksys about 5 times and they are no real help, all I get is pay by credit card after talking to someone for a few minutes.
The problem is I can’t connect to the internet but can only connect to my Network Printer or Home Network. It won’t renew the IP Address for the internet until I reboot the router. I had this problem Connecting it Wired and Wirelessly I have a Linksys WUSB600N version 2 Wireless Adapter.

Check if you have this configuration. Don't miss the MAC Address Cloning.

Internet Connection problems with WRT54GS

I purchased this router to go online with my Wii and my PS3. Extremely easy set up right out of the box and both systems were online within the hour. However the router seems to be freezing up my internet connection. Every 6 hours or so the lights on the front of the router freeze up and I can't access any websites. I spoke to a guy at work who used to set up networks and he told me to unplug it for 30 seconds and plug it back in. This seems to fix the problem and get me back online for about 6 hours. It's not terrible, but it is kind of annoying to have to do this a couple of times a day. It especially annoys the other people in my house (wife, kids) more than it does me. They're used to having uniterrupted, fast internet service. By the way I have DSL through ATT with never any problems before this. Any suggestions?

I attempted to do this but when I get to the downloads section of linksys and input the model and type of my router and then click on firmware I get a window that comes up saying that it is a binary data file and no known program will open it. If it attempt to save the file I can't open it anyway. Any way around this?

Another Internet connection problem with solariis dev express

I have the same problem, i was installed new solaris dev express , my ifconfig output detects my nic
and my name nic is nge0, but i dont connect to internet.
i was reading this forums but the result is null.
i have a cable modem and i using a ethernet connection.
i use this command:
*#ifconfig nge0 dhcp start*
the result is null the dhcp doesnt assing an ip to my nic
then i create a */etc/hostname.nge0* file and follow comments that i seeing on this forums
*#uname -n > /etc/hostname.nge0* ...too i create a */etc/dhcp.nge0*
again i wrote:
*#ifconfig nge0 dhcp start*
but no , the result is null
then i follow more comments on this solaris forums and i added the dns in */etc/resolv.conf*
but the result still null
later i check the gateway using the comand
*#netstat -nr*
but only i see my loopback ip --> 127.0.0.1
too i used the command
*#sys-unconfig* , reboot ..mmm no
but still the same problem
my question is how to set the internet connection using a cable modem that workkssss!!!!!!!?
my computer is a 32bit machine with solaris devexpress and my cable modem.
how to tell to solaris which is my gateway?
i know that the command in my linux box is: route add default gw ip
what i have to do?
i modify a */etc/nsswitch.conf* and i added a dns word after files in hosts line.
create a */etc/defaultrouter* <-- this is to when i have a internal lan ip
in the */etc/hostname.nge0* put only my hostname
*/etc/hostname.nge0* <-- myhostname
or
*/etc/hostname.nge0* <-- inet myhostname
what is true? what is correct? i wsas reading about solaris offical docs about dhcpagent but i dont have clear my ideas.
please someone that you know how to set the internet connection on solaris dev exprres using the dhcp that serves on cable modem.
i dont believe that be more complicated than Linux or FreeBSD
Thanks.

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
(OPTIONAL) While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

Having internet connection problem with a new Actiontec GT794WG

I am currently using Westell 327w which works completely fine. Its internet light comes on after few seconds the DSL light becomes solid. I am trying to change it to GT794WG, because I have been using 327w about 4 years.
By the way, I am having a connection difficulty with my new GT794WG modem.
Although I connect every necessary cables such as DSL, Ethernet cables and turn it on, an internet light on the modem does not flash. There is no problem with DSL light. It becomes solid after few blinking. Only problem is the internet light. I know that it refers that the modem can not connect with the internet.
I don't understand why the new modem can't connect to the internet which my old modem can?
Can anyone help me solve this problem?

Ok.
#1 For your info, there a certain amount of time that you can re-edit your post.
A time limit of at least 2 hours.
#2 Why do you want to replace your Westell 327w with the newer router? That is if there is any other reason besides, you have been using it for four years..
Moving along...
#3 In the Westell 327w, go to Configuration -> VC Configuration
#4 There are different settings there, as I saw at
https://docs.google.com/viewer?url=http://www.westell.com/images/pdf/e90_6000_6100_6110_ug.pdf&embed...
on page 46 out of 146 pages.
#5 What is 0 VPI / 35 VCI set to?
#6 Notes:
a) In the manual/user guide (that docs.google.com URL) the connection type is PPPoE.
b) If 0 VPI / 35 VCI is set to Disabled, what ever the enabled for example 0 VPI / 36 VCI.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Internet connection problem- IP address from router, but will not connect

My Powerbook will connect to an open wireless network where I am and is assigned an appropriate IP address, but neither Mail nor Safari will connect properly. I know the system is working, because other people with wireless laptops can connect fine. I tried quitting everything and rebooting a number of times but no joy. I can't see anything in the settings that I can play with that will make a difference, but I can't understand why it won't connect.Very frustrating. Network diagnostics can't help either. I don't have access to the modem/router to reset it...

I'm having the same problem. I'm traveling and I was able to connect to the wireless network on my G4 Powerbook at the hotel this morning. Now I'm in a different location and I have a strong open wifi signal, but no internet connection. I can add that I also brought my iBook and it works fine on this network. Both worked just fine on this network back in October. I've tried in no particular order: rebooting (4x), Network Diagnostics in Safari ("N.D. cannot fix the current networking problems...make sure you are using the correct network settings"), creating a new user, comparing Network settings between the two Macs (the only difference is the last 3 digits of the IP assigned using DHCP), deleting preferences (airport, internetconnect, & networkConfig.plists, NetworkInterfaces & SystemConfiguration.plists), turning Airport off then back on, and setting up the iBook to share its internet connection. Internet Connect says that I'm connected to the network and have a full signal. Any other ideas?
G4 PBook 17" 1.67, 1.5g RAM•G3 iBook 500•G3 iMac 500•D80 Mac OS X (10.4.8)

Internet connection problem with Creative Cloud

When I try to download a trial of Photoshop via Creative Cloud I continuously get an error message of no Internet connection (This is not the case). Can anybody help

paulmoynagh,
Solution #1
Check the 'hosts" file for adobe entries. if you could see adobe entries there follow the below mentioned steps.
1. Go to the 'Hosts' file location.
WIN : C:\Windows\System32\drivers\etc
MAC: Go to finder menu on the top > go to folders > type '/etc', hit return.
2. move the hosts file to the desktop.
3. Open it.
WIN: open it with notepad.
MAC: double click it.
4. Delete all the adobe entries, as they are blocking your machine to connect to Adobe Activation Server.
5. Move it back to '/etc' folder.
Solution # 2
1. Check if you are working under any sort of firewall (system/network) / proxy.
2. Disable firewall / proxy.
Solution #3 (Should work)
Go for deployment : http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html.
if nothing works, contact Adobe Tech support at : http://helpx.adobe.com/support.html
Regards,
Atul Saini

Internet connection problems with macbook pro

why does my mac book pro keep dropping the internet? When I go into diagnostics it says the ips, internet and server have failed but if I restart the computer it will connect again. i have spoken to my internet provider and replaced my router which seemed to temporarily fix the problem.

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 5
Reset the System Management Controller.
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

Internet connectivity problems with Macbook Pro, mid 2012.

I have a Macbook Pro, mid 2012, running OS 10.8.5. My able to access the Internet is intermittent, both with Ethernet or Wifi. When I check Network settings, it indicates that I am connected, even though I cannot access the Internet. I have to restart the compute to gain access again, which doesn't last. I've taken it to the local Apple Store. They ran thorough diangostics tests which found no hardware problems. I have done complete clean reinstalls of the OS as well. I also have frequent Kernel Panic restarts. I have no problems connecting through my router for my Imac via Ethernet, and wirelessly for a Windows laptop and smartphones and iPod. Any suggstions out there?

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Internet connection problem with a linksys router

Similar Messages

Maybe you are looking for