Internet Explorer 11 Exit Code 3010 - Forced Reboot

I have an application for IE 11 in SCCM 2012 that performs an application detection to see if the version of iexplore.exe is version 11.% to determine if installed. We've had the application marked as "available" in the software center and it's
been working great. Once installed, it exits with code 3010 (soft reboot) and SCCM notifies the user that a reboot is pending without forcing anything. When we tested to make the application "required", however, it began to force reboots. While I
could do some workarounds like modify exit code 3010 to report a success or mark the application behavior to "no specific action required" to avoid the forced reboot, this ends up marking a successful installation pending reboot as a failure since
it finishes up by performing an application detection. This is a problem with IE 11 since the version of iexplore.exe does not change until after a reboot. Is there a way we can deploy IE 11 as a required application without forcing a reboot on users?

I took the suggestion of using software update and ran with it. I took our existing package and built a custom update within SCUP. This is actually working beautifully. It's not forcing a reboot, it's reporting a reboot is pending, and users are
receiving the same up-to-date version of IE we've been deploying already. Thanks for the input everyone!
I'm curious about something.... I was forced to do a deployment just like this once after insisting it was a terrible idea. The next day everyone comes in and IE has been updated. No HTTPS sites would load in the browser. The help desk was overwhelmed with
calls. Are you seeing that issue?
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum

Similar Messages

Can't exit pdf file in internet explorer.

When I open a pdf file in internet explorer, I an unable to exit the pdf file. The only way I can get out of it is by shutting down internet explorer. I am using internet explorer 11 with windows 7. Is there a way to resolve this issue??

Are you trying to open a PDF in a 64-bit version of Internet Explorer?
If you don't know how to see the version - In Internet Explorer, choose Help > About Internet Explorer. (In some versions of Internet Explorer, select the Question mark in the upper-right corner to select About Internet Explorer).
To switch to the 32-bit Internet Explorer, first exit 64-bit Internet Explorer. Then double-click the program icon for the 32-bit version: C:\Program Files (x86)\Internet Explorer\iexplore.exe

Internet Explorer 9 and any Flash version 11.4 and higher does not function

Hello,
I am the network admin for a small business of about 300 user and computers. Recently after the release of Flash 11.4 and above I have noticed that any user on my domain has had issues with Flash unless they are a local or domain administrator. Any user with limited rights has issues. Example, if Flash is on 11.3 or lower the users experience no issues with IE9. If I upgrade them to version 11.4-11.6, whenever IE9 is opened the browser never completes it's task of going to the default web page (Normally MSN). I can sometimes get them to Google, but any page that uses Flash never completes. If I uninstall Flash 11.4 or higher or install the older 11.3 version functionality returns and everythign runs as expected.
I have spent a few days trying to mess with ActiveX filtering but have not had any luck with it, at least not with any domain users. Has anyone got a solution for this issue?

You have Flash Player 11.1 and Flash Player 11.2 installed.
Delete all flash files in your Downloads folder.
Download the following uninstallers:
http://download.macromedia.com/pub/flashplayer/current/uninstall_flash _player_32bit.exe
Download the Flash Player 11.2 preview uninstaller for Windows 32-bit
Here are the installers for Flash Player 11.1 and Flash Player 11.2, CHOOSE ONE to download.
11.1 Flash Player for Internet Explorer
11.2 Download active-x for Windows 32-bit – for Internet Explorer only
Exit browser.
Run both uninstallers, reboot, delete Windows/System32/Macromed/Flash, then install the chosen Flash Player.

Response.sendRedirect doesn't work with Internet Explorer

I do posts like advised here: http://www.theserverside.com/tt/articles/article.tss?l=RedirectAfterPost. GET-POST-REDIRECT-GET. Now I have a problem when do redirecting to the same page in Internet Explorer. It works good with Mozilla Firefox but not with Internet Explorer. When user click to "Enable"/"Disable" link and do submit, application makes changes on the database. Changes occurs, but redirect to the page doesn't work. When I refresh page, I see that, the changes was occurred. When I use Mozilla Firefox with same JSP, there is no need to refresh page, because, redirect works. When I change redirect URL to other, for example http://www.google.com/, redirect doesn,t work in Internet Explorer too.
Code of users.jsp JSP:
<%@ page import="az.ub.ccs.beans.User" %>
<%@ page contentType="text/html;charset=UTF-8" language="java" %>
<%@ page errorPage="error.jsp" %>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<jsp:useBean id="bc" scope="page" class="az.ub.ccs.beans.BreadCrumb" />
<jsp:useBean id="user" scope="request" class="az.ub.ccs.beans.User"/>
<c:if test="${sessionScope.active == null}"><c:redirect url="login.jsp" /></c:if>
<%
   if(request.getParameter("stateAction") != null)
      int state = (request.getParameter("stateAction").equals("enable")) ? 0 : 1;
      User.changeUserState(Integer.parseInt(request.getParameter("itemID")), state);
      response.sendRedirect("users.jsp");
      //response.setStatus(HttpServletResponse.SC_SEE_OTHER);
      //response.setHeader("Location", "users.jsp");
   bc.add("Users");
%>
<jsp:include page="top.jsp" flush="true">
   <jsp:param name="breadCrumbString" value="${bc.breadCrumbsAsHTML}"/>
   <jsp:param name="pageTitle" value="Users"/>
</jsp:include>
<tr>
   <td>
      <table border="1" width="100%">
         <tr class="tableHeader">
            <td>ID</td>
            <td>Имя пользователя</td>
            <td>Логин</td>
            <td>Номер группы</td>
            <td>Название группы</td>
            <td>Email</td>
            <td>Номер</td>
            <td colspan="2">Действие</td>
         </tr>
         <c:forEach items="${user.userList}" var="user">
         <tr>
            <td align="right">"${user.userID}"</td>
            <td><c:out value="${user.userName}"/></td>
         </c:forEach>
         <tr>
            <td colspan="7"> </td>
            <td colspan="2"><a href="addEditUser.jsp">[Add new]</a></td>
         </tr>
      </table>
      <form name="stateForm" method="post" action="users.jsp">
         <input type="hidden" name="itemID"/>
         <input type="hidden" name="stateAction"/>
      </form>
   </td>
</tr>
<jsp:include page="bottom.jsp" flush="true"/>

I use HttpWatch to see request and response details. Link to the report file of HttpWatch http://tasadar8.googlepages.com/CCSHttpWatch.rar

How do I leave my Internet Explorer on?

Say I open an Internet explorer using following code in Java.
Runtime.getRuntime().exec("C:\\Program Files\\Internet Explorer\\iexplore.exe \"http://www.google.com\"");
Then I close it.
I'd like to automatically open up a new Internet Explorer again.
How do I implement this in Java?

The exec method returns a Process object. One of the things you can do with a Proces object is wait for its termination. This is done by calling the waitFor method. So you could call the waitFor method, and when it returns, execute another process. you could do this from another thread if you don't want the current one to block. http://java.sun.com/j2se/1.4.2/docs/api/java/lang/Process.html

How can I force focus from flash to another plugin app in FireFox such as with the e.focus() Java Script command in Internet Explorer

Can you force focus from a Flash app to another plugin such as Unity3d using a JS command similar to e.focus() which works in Internet explorer. The following code works in IE, but not FireFox? Any solution would be helpful. Is it even possible?
function hideSWF(){
e=document.getElementById("flash_content");
e.style.width = 1 + 'px';
e.style.height = 1 + 'px';
e=document.getElementById("u3dobjmsiediv_unity");
e.focus() ;
function showSWF() {
e=document.getElementById("flash_content");
e.style.width = gameWidth + 'px';
e.style.height = gameHeight + 'px';
e.focus() ;
== This happened ==
Every time Firefox opened
== Always existed when switching from Flash app to a different app. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

No, I am saying that this isn't the forum for help with that. This forum is for Firefox user support, and the helpers in this forum aren't versed in development issues like that - we're volunteers, not Mozilla developers and don't work for Mozilla. You are better off asking about that in a forum where other web site developers do support.

Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

How to Force Internet Explorer specific Java Runtime Environment?

Problem: UConn uses a tool called Blackboard. Blackboard requires Version 1.5.0 (build 1.5.0_07-b03)
but I develop so NETBeans IDE needs/wants JDK6 ( likes JDK 6 Update 16 )
Tried managing add-ons in IE, Tried Firefox too.
What I want is to have IE forced to the JDK5 runtime and let my other applications (NetBeans, Oracle, OracleSQLDeveloper, Firefox and MYSQL use the JDK6). I know NEtBeans will allow to specify which JDK but it seems that IE still sees both and screws up.
Things I tried but didnt work: managing add-ons and I saw items like this Force Internet Explorer to use a specific Java Runtime Environment install?
from: http://stackoverflow.com/questions/71254/force-internet-explorer-to-use-a-specific-java-runtime-environment-install
First, disable the currently installed version of Java. To do this, go to Control Panel > Java > Advanced > Default Java for Browsers and uncheck Microsoft Internet Explorer.
Next, enable the version of Java you want to use instead. To do this, go to (for example) C:\Program Files\Java\jre1.5.0_15\bin (where jre1.5.0_15 is the version of Java you want to use), and run javacpl.exe. Go to Advanced > Default Java for Browsers and check Microsoft Internet Explorer.
To get your old version of Java back you need to reverse these steps.
Note that in older versions of Java, Default Java for Browsers is called <APPLET> Tag Support (but the effect is the same).
The good thing about this method is that it doesn't affect other browsers, and doesn't affect the default system JRE.
Any ideas?

bobparis wrote:
Problem: UConn uses a tool called Blackboard. Blackboard requires Version 1.5.0 (build 1.5.0_07-b03)
but I develop so NETBeans IDE needs/wants JDK6 ( likes JDK 6 Update 16 )
Tried managing add-ons in IE, Tried Firefox too.
What I want is to have IE forced to the JDK5 runtime and let my other applications (NetBeans, Oracle, OracleSQLDeveloper, Firefox and MYSQL use the JDK6). I know NEtBeans will allow to specify which JDK but it seems that IE still sees both and screws up.
Simple then - bad idea.
If your minimal target is 1.5 then you develop in 1.5. If you insist on using 1.6 for functional reasons then you will need to maintain two development environments on your box 1.5 and 1.6. You explicitly build support for 1.6 and detection for that into the code and test it using 1.6. And test using 1.5 as well.
Note you must test both 1.5 and 1.6. Full functional tests.
Obviously limiting yourself to 1.5 would require less effort (cost.)

Force remove malware plug-in Internet Explorer 11 Windows 8.1

Hi,
I have a malware add-on (browser search hijacker) that can't be removed using conventional means:
When I try to remove the by double clicking that add-on and select 'Remove', the Remove button is greyed out. See below:
How would I force remove the offending malware?
Thanks.

See: "How to
Reset Internet Explorer settings".
Then...
1. Please download and run the
Microsoft Safety Scanner tool (freeware).
2. Reboot your PC.
3. Please download and update Malwarebytes Anti-Malware Free
4. Reboot Windows in
Safe Mode and run a
Full Scan with Malwarebytes Anti-Malware.
5. Download and Run AdwCleaner and RogueKiller
(Freeware)
6. Reboot and Test.
Best of Luck,
Vincenzo Di Russo
Microsoft® MVP Windows Internet Explorer, Windows & Security Expert - since 2003.
Moderator in the Microsoft Community and TechNet Forums
My MVP Profile

Service Template: Automatic Machine Rebooting and Script Restarting via Exit Code in Script Application

Hello,
My question is on Script Applications in
Service Templates:
In VM Templates, in the Application Configuration tab, one can add a Script Application. This can be a PowerShell script, a batch script, etc.
For each Script Application, it is possible (via the Advanced options) to make the
machine reboot when the script exits with one of three
exit codes: 1641, 3010 and 3011.
Problem:
For PowerShell or PS scripts, if I use ‘exit 3010’, the machine should reboot but it doesn’t…
Bad workaround:
Use a batch script which calls the PS script. Then, exit out of the batch script using ‘exit $LASTEXITCODE’. This works. The machine reboots.
I can’t use the workaround. Is there a way to do this using just the PS script?
-Rohan.

In fact yes.
You actually want SCVMM to orchestrate the reboot by sending the proper exit code. Otherwise SCVMM gets all weird about things.
It is in the advanced settings for the script and / or command.
You need to make sure that your script tosses the 3011 or 3010 on exit.
I do it with the 3011:
# Exit 3011
[Environment]::Exit(“3011”)
In the XML you will find this:
<vmmst:RebootExitCodeRegex>{1641}|{3010}|{3011}</vmmst:RebootExitCodeRegex>
But you do not want to enable restarting the script on each reboot or you will find yourself in a loop.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages

Browsing history is set to "delete on exit" from Firefox however cookies and history are still listed in Internet Explorer - which I never use. Why??

Firefox is set to delete browsing history on exit. Appears to be working fine. However, if I open Internet Explorer - after closing Firefox - my cookies and history are listed in Internet Explorer. I have to go to Tools >Options> Internet History and delete everything manually. (Internet Explorer is also set to delete history on exit.
Why are my cookies and history being transferred from Firefox to Internet Explorer?

Thanks cor-el for the reply.
Do not have any MS plugins that I'm aware of. No Silverlight,etc.
How can I tell if Windows Media player is plugged in to FF?
No IE View or IE tab.
Not a major problem because I can go in and delete manually--minor hassle.
Have had the same problem across several FF updates. Just curious why this is happening.

I need help with this code involving making stuff in safari appear the same in internet explorer

In the Preview mode, Safari shows it the way I want it too
look, but when I go to view it on Internet Explorer, the window
look blank. When I check the 'veiw source code' for it it shows all
the codes I have for it. I'm guessing because I'm using positioning
in CSS and HTML its not aligning right in explorer. But I heard
from one of my friends that there is a code that somehow makes it
so that the webpage looks the same for safari and internet
explorer. He said he didn't know the code, and I've can't find it
on the web so far, so maybe somebody here knows what I'm talking
about? He said all I had to do is enter the code in the code panel
and it should work.

Looks like you did not close the JavaScript comments on the
portfolio page:
<script language="JavaScript" type="text/JavaScript">

</script>
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com
"SCathey" <[email protected]> wrote in
message news:[email protected]...
>
http://myweb.usf.edu/~scathey/
Theres the link. The home, resume, and bio page
> seems to work fine, but when I check the portfollio
page, thats when it turns
> blank in internet explorer. I used a javascript slide
show code for those
> pages, but I used a similar code like that and I had no
previous problems. I
> just want to know if there is a code that allows the
codes to work the same in
> all browsers.
>

SAP GUI 7.20 exit unexpectedly with Internet Explorer 9 RC

The SAPGUI 7.20 patch level 4 exits unexpectedly without reporting errors since I installed Internet Explorer 9 RC.
This seems to happen in forms with ALV lists? For example, using the transaction SM04
Tested on two computers both with windows 7 64bit
IE9RC removing all comes back to work.
Someone confirm the same problem?
Edited by: Alessandro Brunello on Feb 11, 2011 5:46 PM

SAP GUI 7.20 Patch Level 5
At me there is nothing o.k.
Already the same problem. Which Release Level of Internet Explorer 9 RC do you have ?
Does it come with the standard update for Microsoft Software ?
Only classic theme is working.
I have to say, that I have german versions installed.
Regards
Rainer
Edited by: Rainer Hopfensitz on Mar 16, 2011 11:26 AM

When I try to log in to the Centrelink site computer freezes and have to reboot router but this does not happen with Internet Explorer

I have been trying for weeks to log into Centrelink web site but every time I get to the security question computer freezes and I lose connection. I then have to reboot router. Internet provider advised me to check site using Internet Explorer which I did and had no problems.

Sounds like Malware or a Rootkit infection.
Install, update, and run these programs in this order. They are listed in order of efficacy.<br />'''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' <br />These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have.<br />
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
SuperAntispyware - [http://www.superantispyware.com/] <br />
AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] <br />
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]<br />
Also, if you have a search engine re-direct problem, see this:<br />
http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If these don't find it or can't clear it, post in one of these forums for Rootkit removal help: <br />
[http://www.spywarewarrior.com/index.php] <br />
[http://forum.aumha.org/] <br />
[http://www.spywareinfoforum.com/] <br />
[http://bleepingcomputer.com]

Internet Explorer 11 Exit Code 3010 - Forced Reboot

Similar Messages

Maybe you are looking for