Internet Explorer 9 and any Flash version 11.4 and higher does not function

Hello,
I am the network admin for a small business of about 300 user and computers. Recently after the release of Flash 11.4 and above I have noticed that any user on my domain has had issues with Flash unless they are a local or domain administrator. Any user with limited rights has issues. Example, if Flash is on 11.3 or lower the users experience no issues with IE9. If I upgrade them to version 11.4-11.6, whenever IE9 is opened the browser never completes it's task of going to the default web page (Normally MSN). I can sometimes get them to Google, but any page that uses Flash never completes. If I uninstall Flash 11.4 or higher or install the older 11.3 version functionality returns and everythign runs as expected.
I have spent a few days trying to mess with ActiveX filtering but have not had any luck with it, at least not with any domain users. Has anyone got a solution for this issue?

You have Flash Player 11.1 and Flash Player 11.2 installed.
Delete all flash files in your Downloads folder.
Download the following uninstallers:
http://download.macromedia.com/pub/flashplayer/current/uninstall_flash _player_32bit.exe
Download the Flash Player 11.2 preview uninstaller for Windows 32-bit
Here are the installers for Flash Player 11.1 and Flash Player 11.2, CHOOSE ONE to download.
11.1 Flash Player for Internet Explorer
11.2 Download active-x for Windows 32-bit – for Internet Explorer only
Exit browser.
Run both uninstallers, reboot, delete Windows/System32/Macromed/Flash, then install the chosen Flash Player.

Similar Messages

Internet Explorer thinks Adobe flash player is unsafe and will not download

Hi,
I am using I.E. 9 and Windows 7 64 bit os. Everytime I try to download the Adobe flash player, I.E. will stop it and say it's been reported as unsafe. Any way around this? Thanks for any help you can provide!

Doobieray wrote:
Hi,
I am using I.E. 9 and Windows 7 64 bit os. Everytime I try to download the Adobe flash player, I.E. will stop it and say it's been reported as unsafe. Any way around this? Thanks for any help you can provide!
There are illustrated instructions in this post which explain how to download the file if you continue to experience the problem: http://forums.adobe.com/message/4090545#4090545
Message was edited by: Xircal

Windows 8 with Adobe Flash that does not function.

I have Windows 8 with Adobe Flash integrated. However, the program does not function most of the time.

Is it IE10 or have you updated to IE11?

When I install adobe acrobat XI PRO, it converts everything on my computer to an adobe icon, and when I try to open it, it open adobe acrobat. For example, I can't open word, excel, internet explorer, or any other document or program because it thinks its

When I install adobe acrobat XI PRO, it converts everything on my computer to an adobe icon, and when I try to open it, it open adobe acrobat. For example, I can't open word, excel, internet explorer, or any other document or program because it thinks its acrobat.

Hi Kate,
Please refer to this KB doc. for the solution Application, file icons change to Acrobat/Reader icon
Let me know if the issue persist.
Regards,
Aadesh

Website template created in PS not displaying correctly in Internet Explorer. Any ideas?

Hi there
I was wondering if anyone could help me with creating templates in photoshop.
I have cut up my site, centred the table it produces in Dreamweaver and added a background and made the banners rotate but the site does not load correctly in Internet Explorer (even before I did all this stuff). The cells are not correctly aligned.
I have also tired validating the code but it says it is not valid HTML.
Has anyone else had this problem?
My website can be viewed at: https://dl.dropbox.com/u/4966582/intranet/index.html
Thanks in advance

Photoshop is for images only. Don't attempt to use the exported code on real web sites. It won't work in the wild. Why? Because the code isn't good & the tables are too rigid to hold anything other than the image slices. When you attempt to edit this layout in DW or any HTML editor, the whole thing falls apart and produces unsightly gaps between slices.
The reason it doesn't look right in IE is because the code lacks a valid document type declaration on the first line. This causes IE to render the page in Quirks Mode.
The export HTML feature in Photoshop is really only for quick comps to show a client before you begin building the actual web site with HTML and CSS code.
Although written for Fireworks, the 3-part tutorial below describes the procedure for bringing your design comp into a CSS Layout in DW. If you get stuck on anything, feel free to post specific questions in the DW general discussion forum.
Part 1 - Initial Design
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
Part 2 - Markup preparation
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html
Part 3 - Layout and CSS
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html
Have fun!
Nancy O.

Hi I have recentrly bought IPAD AIR , is there any flash version supporting this model or is there any alternative for flash siles to open ?

Hi,
I have recently bought IPAD AIR , is there any flash version supporting this model or is there any alternative for flash sites to open ?

iPad do not support Flash
However Skyfire, Photon, iSwifter, Browse2Go and Puffin Web Browser will provide limited Flash capability

Internet explorer 11 missing letters on web page and can't type in a search

Windows 10 preview installed
Internet explorer 11 missing letters on web page and can't type in a search

I just got a call about this exact issue today!
The person is at a Marriott hotel which uses some type of company called STSN for their internet connection via both Ethernet and Wifi.
http://www.stsn.com/home.html
I'm waiting for them to call me back after trying every trouble shooting step I could think of. My only guess now is that it's Safari's pop up blocker blocking some kind of navigation or log-in window. I'm going to tell them to turn off pop-up blocker menu choice next.
After that it's turning off Java and Javascript to see if the have any affect.
Btw, they're experiencing this propblem on a TiBook G4. Also tried a new user account and two other pre-existing accounts but all had the same issue. Both with Ethernet and WiFi the problem remained.
Too many to list Mac OS X (10.4.8)

Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with CS3 and CS6 and get the same problem. Doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with both CS3 and CS6 on 10.8.2 and get the same problem. This doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
tracking down the cause of the flakiness can be tricky ... as you already know ...
just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

[svn:fx-trunk] 12007: When the Internet Explorer browser window is obscured Stage. width and Stage.height never return the proper sizes until/ unless the IE window is unobscured long enough for the player to feel it needs to render initially .

Revision: 12007
Revision: 12007
Author:   [email protected]
Date:     2009-11-19 12:45:27 -0800 (Thu, 19 Nov 2009)
Log Message:
When the Internet Explorer browser window is obscured Stage.width and Stage.height never return the proper sizes until/unless the IE window is unobscured long enough for the player to feel it needs to render initially. This was preventing our preloader from completing, since we were waiting for a non-0 Stage size. Took a slightly different approach to solving the bug for which the original logic was added to work around.
QE notes: None
Doc notes: None
Bugs: SDK-24191
Reviewer: Alex, Evtim
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/non-0
    http://bugs.adobe.com/jira/browse/SDK-24191
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.as

Revision: 12007
Revision: 12007
Author:   [email protected]
Date:     2009-11-19 12:45:27 -0800 (Thu, 19 Nov 2009)
Log Message:
When the Internet Explorer browser window is obscured Stage.width and Stage.height never return the proper sizes until/unless the IE window is unobscured long enough for the player to feel it needs to render initially. This was preventing our preloader from completing, since we were waiting for a non-0 Stage size. Took a slightly different approach to solving the bug for which the original logic was added to work around.
QE notes: None
Doc notes: None
Bugs: SDK-24191
Reviewer: Alex, Evtim
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/non-0
    http://bugs.adobe.com/jira/browse/SDK-24191
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.as

I need to download realplayer for a university course unfortunately I can't download internet explorer. Any advice?

I need to download realplayer for a university course unfortunately I can't download internet explorer. Any advice?

You do not need IE to download RealPlayer.

I can not attach any files to email or Facebook. When I go to "browse" the window comes up and disappears immediately. I updated browser and Adobe Flash. Restarted computer and zapped pram. any ideas? Please help!

I can not attach any files to email or Facebook. When I go to "browse" the window comes up and disappears immediately. I updated browser and Adobe Flash. Restarted computer and zapped pram. any ideas? Please help!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box. Don't use the Safari-only Guest login created by Find My Mac.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

I have iphone 4 software version 6.1.3 ,suddenly i waked up and i noticed that some pf my apps does not want to open ,please any help !!!

i have iphone 4 software version 6.1.3 ,suddenly i waked up and i noticed that some pf my apps does not want to open ,please any help !!!

Do you have a backup? If so you could try restoring from that. Anything you created since the backup was made will be lost.
These are the basic troubleshooting steps
Troubleshooting
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears then let go.
Backup, reset, restore on icloud or itunes or restore as new.
Place the phone into recovery mode by doing this
If this fails to fix the problem make an appointment and visit and Apple store or an authorised service provider

Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed latest version of Tuxera NTFS for Mac.

I purchased a 3TB HDD (WD USB 3.0 $100) to replace the 2TB Seagate for a new Time Machine HDD. The 2B was full and backups were deleting older files. The 3TB was formatted NTFS and I want to "recover" the included SW before I reformatted the HDD for the iMac. I discovered that MacFuse was out of date and unsupported and my NTFS-32 was also out of date so I uninstalled both and then installed the most recent version of Tuxera NTFS for Mac. I rebooted and discovered that the FW800 port was unresponsive. Below is the EtreCheck report:
Problem description:
Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed Tuxera NTFS for Mac.
EtreCheck version: 2.0.8 (95)
Report generated October 30, 2014 7:11:17 PM EDT
Hardware Information: ℹ️
iMac (24-inch Mid 2007) (Verified)
iMac - model: iMac7,1
1 2.8 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI,RadeonHD2600 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 0:17:34
Disk Information: ℹ️
WDC WD5000AAKS-40TMA0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
ML 10.8 (disk0s2) / [Startup]: 499.25 GB (20.92 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Logitech USB Receiver
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Hardware Monitor ƒ/HardwareMonitor.app
[loaded] com.bresink.driver.BRESINKx86Monitoring (7.0) Support
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (8.0 18615.948847) Support
[not loaded] com.parallels.kext.hypervisor (8.0 18615.948847) Support
[not loaded] com.parallels.kext.netbridge (8.0 18615.948847) Support
[not loaded] com.parallels.kext.usbconnect (8.0 18615.948847) Support
[not loaded] com.parallels.kext.vnic (8.0 18615.948847) Support
/Applications/Toast Titanium v11.1/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/Applications/Toast Titanium/Toast Titanium v11.1 (1072).app
[not loaded] com.roxio.TDIXController (2.0) Support
/Library/Application Support/Symantec/AntiVirus
[loaded] com.symantec.kext.SymAPComm (12.2f1 - SDK 10.6) Support
/System/Library/Extensions
[loaded] com.Logitech.Control Center.HID Driver (3.9.0 - SDK 10.6) Support
[loaded] com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) Support
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) Support
[not loaded] com.increw.kext.speedit (0.32) Support
[loaded] com.logitech.manager.kernel.driver (4.10.0 - SDK 10.8) Support
[not loaded] com.olympus.CamBlockCommandsDevice (2.0.0) Support
[not loaded] com.olympus.CamBlockCommandsDeviceUP (2.0.0) Support
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
[loaded] com.symantec.kext.internetSecurity (5.2f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ips (3.5f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ndcengine (1.0f1 - SDK 10.6) Support
[loaded] com.taoeffect.ispy.kext (2.0.2 - SDK 10.2) Support
/System/Library/Extensions/OlympusDSCDriver.kext/Contents/PlugIns
[not loaded] com.olympus.CamFWSerialBusProtocolTransport (2.0.0) Support
[not loaded] com.olympus.CamUSBMassStorageClass (2.0.0) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
/Users/[redacted]/Downloads/LCC Installer.app
[not loaded] com.Logitech.Unifying.HID Driver (1.3.1 - SDK 10.8) Support
Startup Items: ℹ️
TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] com.canon.MFManager.plist Support
[not loaded] com.cooliris.SetLaunchArch.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[running] com.logitech.manager.daemon.plist Support
[running] com.micromat.TechToolProAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[running] com.symantec.uiagent.application.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[running] com.eltima.ElmediaPlayer.daemon.plist Support
[loaded] com.embraceware.awaken.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.micromat.TechToolProDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.prosofteng.DriveGenius.locum.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
[loaded] com.symantec.liveupdate.daemon.ondemand.plist Support
[failed] com.symantec.liveupdate.daemon.plist Support
[not loaded] com.symantec.sep.migratesettings.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
[running] com.taoeffect.ispyd.plist Support
[running] com.wdc.drivemanagerservice.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.prosofteng.DGMonitor.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.taoeffect.EspionageHelper.plist Support
User Login Items: ℹ️
Speedy Mac Application (/Applications/Speedy Mac/Speedy Mac.app)
AwakenHelper Application (/Users/[redacted]/Library/Application Support/Awaken/AwakenHelper.app)
GetBackupAgent Application (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
WDDriveUtilityHelper Application (/Users/[redacted]/Downloads/WD/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
ClustersHelper Application (/Library/PreferencePanes/Clusters.prefPane/Contents/Resources/ClustersHelper.a pp)
RealPlayer Downloader Agent Application (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
SAVDiskMountNotify UNKNOWN (missing value)
ScanNotification UNKNOWN (missing value)
Launch Nikon Message Center 2 Application (/Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app)
Internet Plug-ins: ℹ️
EPPEX Plugin: Version: 10.0 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 9.4.6 Support
Unity Web Player: Version: UnityPlayer version 3.5.3f3 - SDK 10.6 Support
NPVirtools: Version: 4.0 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.6.8r638 Support
QuickTime Plugin: Version: 7.7.1
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
GarminGpsControl: Version: 2.9.3.0 Release Support
ToontownBundleManager: Version: (null) Support
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
OVSHelper: Version: 1.0 Support
CoolirisWebKitPlugin: Version: (null) Support
Google Earth Web Plug-in: Version: 6.1 Support
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
User Internet Plug-ins: ℹ️
BrowserPlus_2.9.2: Version: 2.9.2 Support
Picasa: Version: 1.0 Support
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video>
Open in Internet Explorer
DivX HiQ
Aimersoft Video Converter
3rd Party Preference Panes: ℹ️
BrowserPlus Support
Clusters Support
Déjà Vu Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Logitech Control Center Support
Logi Preference Manager Support
MenuMeters Support
Perian Support
Symantec QuickMenu Support
TechTool Protection Support
Tuxera NTFS Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
iMac TimeMachine [Local]
Total size: 2 TB
Total number of backups: 80
Oldest backup: 2011-09-18 05:21:33 +0000
Last backup: 2014-10-05 20:18:55 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 0 B X 3)
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Top Processes by CPU: ℹ️
      2% WindowServer
      0% Speedy
      0% SystemUIServer
      0% RealPlayer Downloader Agent
      0% ps
Top Processes by Memory: ℹ️
288 MB SymDaemon
150 MB Speedy
137 MB Safari
82 MB WebProcess
82 MB coreservicesd
Virtual Memory Information: ℹ️
2.17 GB Free RAM
1.46 GB Active RAM
148 MB Inactive RAM
518 MB Wired RAM
388 MB Page-ins
0 B Page-outs
I hope someone has some ideas! TIA.

Do you have another cable you can test with? Do you have access to another computer with Firewire you can test with?
FireWire Device not Working
FireWire/USB - Quick Assist

How do I download Adobe Flash Player for a computer that does not have internet?

How do I download Adobe Flash Player for a computer that does not have internet?

Hello Walter,
that's it, usually you get and Adobe Flash Player Installer only. For a distribution in a company, or an installation on a PC without internet access, Adobe has available an offline installer. This installer you don't need to uncompress it first. You can download the installation file from there (you must logged in with your Adobe ID): http://www.adobe.com/products/flashplayer/distribution3.html
Hans-Günter

IS there any app to listen FM radio which does not need internet.

IS there any app to listen FM radio which does not need internet. Because my previous nokia phone had it and I can listen to local FM stations without connecting to internet.

To think outside the box, you could get a headset with FM:
Sony Ericsson MW600 Bluetooth Stereo Headset with FM Radio
Sony Ericsson MH907ch Bluetooth Stereo Headset with FM Radio
I use the first one with my Sony Ericsson phone, which although it does have a FM radio, doesn't work unless I have wired headphones plugged in. And the streaming apps are choppy for me due to the weak 3G signal in my area. (Constant rebuffering.) So with these headsets, I have FM radio and can answer the phone without having to change earbuds and without having having to use up my cellphone's battery power to power the FM radio or the app.

Internet Explorer 9 and any Flash version 11.4 and higher does not function

Similar Messages

Maybe you are looking for