Internet MP Step-by-Step Document.

Question

Is there a step by step for start to finish for making a Internet MP on SCCM 2012 R2 ??

Answer 1

Taken from the wsyncmgr.log
Wakeup for a polling cycle
Starting Sync
Performing sync on retry schedule
Read SUPs from SCF for NWICCM01.nwtraders.msft
Found 1 SUPs
Found active SUP NWICCM01.nwtraders.msft from SCF File.
DB Server not detected for SUP NWICCM01.nwtraders.msft from SCF File. skipping.
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=NWICCM01.nwtraders.msft SITE=IMP PID=2436 TID=696 GMTDATE=Mon Jan 19 19:25:32.304 2015 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
Sync failed: WSUS server not configured. Please refer to WCM.log for configuration error details.. Source: CWSyncMgr::DoSync
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=NWICCM01.nwtraders.msft SITE=IMP PID=2436 TID=696 GMTDATE=Mon Jan 19 19:30:32.364 2015 ISTR0="CWSyncMgr::DoSync" ISTR1="WSUS server not configured.
Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
Sync failed. Will retry in 60 minutes
Setting sync alert to active state on site IMP
Sync time: 0d00h05m00s
Thread terminated by service request.
SMS_EXECUTIVE started SMS_WSUS_SYNC_MANAGER as thread ID 4888 (0x1318).
Taken from the WSUSCtrl.log
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
Checking runtime v2.0.50727...
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
Checking runtime v4.0.30319...
Found supported assembly Microsoft.UpdateServices.Administration version 4.0.0.0, file version 6.3.9600.16384
Found supported assembly Microsoft.UpdateServices.BaseApi version 4.0.0.0, file version 6.3.9600.16384
Supported WSUS version found
Attempting connection to local WSUS server
System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation
procedure.~~   at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)~~   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest
asyncRequest)~~   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)~~  
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)~~   at
System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[]
buffer, Int32 count, AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count,
AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult
lazyResult)~~   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)~~   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext,
ContextCallback callback, Object state, Boolean preserveSyncCtx)~~   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)~~   at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult
result)~~   at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)~~   at System.Net.ConnectStream.WriteHeaders(Boolean async)~~   --- End of inner exception stack trace ---~~   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[]
args)~~   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber)
Failed to set WSUS Local Configuration. Will retry configuration in 1 minutes
Attempting connection to local WSUS server
System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation
procedure.~~   at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)~~   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest
asyncRequest)~~   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)~~  
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)~~   at
System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[]
buffer, Int32 count, AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count,
AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)~~   at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult
lazyResult)~~   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)~~   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext,
ContextCallback callback, Object state, Boolean preserveSyncCtx)~~   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)~~   at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult
result)~~   at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)~~   at System.Net.ConnectStream.WriteHeaders(Boolean async)~~   --- End of inner exception stack trace ---~~   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[]
args)~~   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber)
Failures reported during periodic health check by the WSUS Server NWICCM01.nwtraders.msft. Will retry check in 1 minutes
Waiting for changes for 1 minutes
Taken from mpcontrol.log
SSL is enabled.
Client authentication is also enabled.
Machine name is 'NWICCM01.nwtraders.msft'.
Begin validation of Certificate [Thumbprint 98542e7bd2343725dda3f14a69cb373274df9a63] issued to 'NWICCM01.nwtraders.msft'
Completed validation of Certificate [Thumbprint 98542e7bd2343725dda3f14a69cb373274df9a63] issued to 'NWICCM01.nwtraders.msft'
Skipping this certificate which is not valid for ConfigMgr usage.
There are no certificate(s) that meet the criteria.
Performing machine FQDN to SAN2 search.
Begin validation of Certificate [Thumbprint d6b1f67ee1e5680ab449bbd834e60155f03e3661] issued to 'NWICCM01.nwtraders.msft'
Certificate has "SSL Client Authentication" capability.
Completed validation of Certificate [Thumbprint d6b1f67ee1e5680ab449bbd834e60155f03e3661] issued to 'NWICCM01.nwtraders.msft'
Begin validation of Certificate [Thumbprint 98542e7bd2343725dda3f14a69cb373274df9a63] issued to 'NWICCM01.nwtraders.msft'
Completed validation of Certificate [Thumbprint 98542e7bd2343725dda3f14a69cb373274df9a63] issued to 'NWICCM01.nwtraders.msft'
>>> Selected Certificate [Thumbprint d6b1f67ee1e5680ab449bbd834e60155f03e3661] issued to 'NWICCM01.nwtraders.msft' for HTTPS Client Authentication
Call to HttpSendRequestSync succeeded for port 443 with status code 200, text: OK
Sent summary record of SMS Management Point on ["Display=\\NWICCM01.nwtraders.msft\"]MSWNET:["SMS_SITE=IMP"]\\NWICCM01.nwtraders.msft\ to
\\NWICCM01.nwtraders.msft\SMS_IMP\inboxes\sitestat.box\p0kquibp.SUM, Availability 0, 52425724 KB total disk space , 42849720 KB free disk space, installation state 0.
Http test request succeeded.
STATMSG: ID=5460 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_MP_CONTROL_MANAGER" SYS=NWICCM01.nwtraders.msft SITE=IMP PID=2416 TID=4400 GMTDATE=Mon Jan 19 20:12:02.522 2015 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
Successfully performed Management Point availability check against local computer.
I can telnet to the port and resolve the name fine. I cant get any of the clients to connect.