Internet Radio is NOT missing after all, hooray!

OK, Internet Radio is NOT missing after all. Its placement  just has been made so illogical that as long as you try to find it by logic you will fail.
This is what and where it used to be: an item "Radio" under "LIBRARY" in the side bar, its showing toggleable on-off in Preferences by checking/uncheking the corresponding checkbox. You click on "Radio" under "LIBRARY" and you see a list of internet radio stations in the browser frame.
Here is what and where it is now: a button "Internet" in a button bar over the browser frame when item  "Music" is selected under "LIBRARY" in the side bar. You click on "Internet" and you see a list of internet radio stations in the browser frame just as in the happy olden days. The word "Radio" (as a button) now refers to a service where you can make up your own "stations" a la Pandora, I guess.  At the same time nothing whatsoever has changed in Preferences, there is still an "Internet Radio" checkbox  but unless you are looking at the buttons over the browser frame you will never know what it does. Not only that, there is no corresponding "Internet Radio" library item or button anywhere, there is "Radio" and an "Internet" button, and it just so happens that the checkbox will toggle the "Internet" button on-off.
The end result of all of this is that all items under "Show" in Preferences toggle items under "LIBRARY"  in the side bar except the "Internet Radio" item which will toggle the "Internet" (i.e. internet radio) button in the button bar of "Music". This also means that the only button that can be toggled on/off in the button bar is the "Internet" button, all others are fixed.
Messing with it for messing's sake, trying to be fancy.

Hi Sarah, thanks for ur reply.
I did not use toad to kill session.
I use form application to kill session,
e.g. user id 1111 log in to the application in PC 1
at the same time, same user id 1111 log in to the application in PC 2
So when the user log in into PC 2, i kill the session in PC 1 (in form application).
So when i log out from PC 2, i close the applet, in the next hour, i need to log in again using PC 2 without close the IE.
So the IE is not responding.
Is there any way to refresh IE without re open again to connect to the application ?
Thanks,
Iwan

Similar Messages

  • Sirius Internet Radio doesn't work after Snow Leopard

    Sirius Internet Radio doesn't work after I installed Snow Leopard. It works on my Firefox. I emptied the cache on my Safari, but still nothing. Any solutions?

    The reason why Sirius Radio online won't work with Safari anymore is because Sirius radio online is only supported by a 32-bit browser. Snow Leopard and all its applications are 64-bit. The best solution is to use firefox. If you still insist on using safari..... Go to adobe.com reinstall adobe flash player. Install/update Flip4Mac. Go to setting for Flip4Mac and check off all the options under the browser tab. Then when you go into Sirius Radio online, you will get an error message, just click okay. Then when you click a station, a quicktime player will come up and you will be able to listen to sirius online radio.
    [email protected]

  • ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

    ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

    Follow these steps:
    go to system preferences.. Open Network..
    CONFIGURATION: DEFAULT
    TELEPHONE NUMBER : #99*
    leave account name and password columns blank
    Now go to ADVANCED
    IN MODEM MENU
    VENDOR : GENERIC
    MODEL : GPRS / 3G
    Press ok
    Then CONNECT.. Enjoy.

  • TS1538 Still not connecting after all these steps were done, what is the solution?

    Still not connecting after all these steps were done, what is the solution?

    Tried a different cable, this cable will now charge the ipod, but will not be recognized by the computer as even being a drive.
    haven't tried a different computer because I really don't want itunes instaled on it.

  • Internet radio is not loading in apple tv

    I have a 1rst generation Apple TV, since last week the internet radio is not loading. Anybody experinced the same problem? This service is not available anymore?. Thanks . Victor

    This is happening for us too. I have checked the internet connection, restarted the Apple TV and nothing works.

  • Client (an internet radio) will not automatically connect

    Trying to install an internet radio Sagecom RM 50 on my intel mac lion with a time capsule. It will not connect automatically. I can connect using a pin and inputting the MAC, but when turning the radio off , it will not reconnect automatically. The radio works perfect on my office system with a thompson router and windows xp. Any ideas?

    Sorry I haven't fully explained. First time I have joined a forum for assistance.
    The Sagemcom RM50 is a wireless only internet radio and should connect automatically to your network after it scans for available networks and you input the encryption key. It works as advertised with my work router and windows xp system. I checked it at work for troubleshooting only to ensure that there was not a problem with the radio.
    I want to use this at home, but it does not connect automatically with my TC and imac. It recognizes both my normal and guest networks. I am able to input the encryption key with no faults, but it just continues attempting to connect with no error codes. The only way I have been able to connect is by "add wireless client" manually from the airport utility. This is where there is an option to use a PIN. The PIN is generated from the radio itself. The radio MAC address is then found and the connection established with no further problems. (There is also an option for "connect on first attempt" but this does not work.) According to the airport utility documentation after you have added a wireless client, it should reconnect without a password.
    The problem is that when you turn the radion off and back on the radio will not automatically reconnect.
    We have 6 or 7 other  wi-fi devises (both apple and non-apple) that have never given this sort of problem.
    It appears that the TC or OS is not saving or recognizing the radio MAC address when you turn it on. It just continues attempting to connect. I'm pretty certain at this point there is something blocking the wireless connection attempt and that a setting needs to be revised to allow the radio to connect and an IP address provided.
    Any assistance would be greatly appreciated.

  • TS5213 My internet sharing is not working at all. I turn it on and it shows no sign of being activated and my other devices don't even show its signals.Help!!

    when i turn my network sharing on,it shows the green sign but the wifi sign doesn't change to show any sign of internet sharing. i'm trying to share my wifi from my laptop to my iphone(i can't connect my wifi directly to my iphone for other reasons). my iphone also doesn't show any wifi signals from my laptop. i bought my mac new and updated it to OS X mavericks.help please.

    Help Tahlia wrote:
    It's not working at all ...
    See Here for  >  Frozen or unresponsive iPhone
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430
    More Info here...
    https://discussions.apple.com/message/19521062

  • Why BIA is not stable after all these years? (old)

    Hi all,
    We purchased BIA (16GB blades) in 2006, implemented to our production in 2007 with Version 34.
    It was a success; the first month BIA was hit 18K times. Today we are seeing about 300K hit a month (we're using 32GB blades with version 49. ). I can assure you that it was(and is)not a plug and play appliance, we have experienced every single BIA error existed on earth. Don't get me wrong; when it works it's an awesome product, I believe in BIA and support it 150%, this is why i am here spending my time.
    3 weeks back, we upgraded BIA from Ver 48 to 49. After a week of quiet time, one of my blades went down for no appearent reason, that not only caused an outage for thousands of internal and external customers but wiped out the confidence that I have with the new version 49.
    Today, I am "once again" sending apology emails to my users, customers, my boss, CIO etc about the BIA outage. Forget about preventing this to happen in the first place, but I don't understand why it is so hard for you SAP guys to identify the query that crushed the blade(s). I assume your priority is making BIA fancier - such as working on back-up and recovery - instead of making it stable, or at least more monitorable
    It is very, very, very frustrating that after all these years that this tool is still not stable, in other words after all the feedback we gave to SAP, after all the times we spent together, we are back to the square one. Think about , would you be keep investigating to a car that keep stopping in the middle of rush hour traffic? So why should you pay hundreds of thousands of dollars for a product that goes down every day? 
    Anyways, let me know if you know a way to find out what particular query brings down BIA without leaving the trace on 24x7 for days.
    Cheers
    Tansu
    Edited by: tansuaksu on Apr 30, 2009 1:46 PM
    Edited by: tansuaksu on Apr 30, 2009 2:01 PM

    Tansu,
    if you go to Usage -> Acess Statistics in TREXAdmin (Python), not all the columns are populated by default (at least in our case)
    Like #unloads, #reads, waittime, #merges, # writes, #plans, input/output, # FEMS among others.
    To collect this data, you have to activate additional level of stats.
    Go to indexserver.ini for your masterblade. default is set to No. Change it to yes.
    [indexusagecollector]                                                                               
    #active = no                                                                               
    active = yes  
    Unfortunately, there is no documentation available on what each of these values truly represent. So you are left on your own to interpret them as you like.
    A discussion in this forum on how you read these numbers would be helpful though.
    BIA Stability:
    To sum up: BIA has the notion "It rocks when it works" in our company.
    Some of biggest issues:
    1. There are queries failing that BI team doesn't know about unless users report to us. But users have stopped reporting BIA related failures to us because same query completes successfully after 5 mins (when the temporary memory goes down again). so our users just rerun the quey after sometime rather than reporting it to us. Bottomline -  BIA is NOT up 100%. we only know if a query has failed if we go thru the trace files.
    2. As Arun mentioned, we too have some queries that dont work at all with BIA due to huge dataset sent back to OLAP. Eventually we had to turn off BIA for those queries.
    3. It takes too long for back up to take over. In our case it took 75 mins before back up took over.
    we would rather prefer to set a threshold ourselves on when back up should kick in rather than waiting for active blade to go completely down. Unless its a hardware failure (chances of which are pretty slim), back up would always wait for active blade to go completely down. what if an acitve blade is in hung state?
    [Re: Automated Failover - can we force backup blade to take over?] discussed here
    4. We dont know which query brings BIA down. (that what we are tyring to figure out using the stats mentioned above.)
    4. Inverted Data model - we have some cubes which have master data tables bigger than fact tables.
    For some, BIA works. For others, aggregates are more effecient. we are still not able to figure out, whats the difference?
    [How to relate STEPUID/DMUID in RSDDSTAT_DM to STATUID in RSDDSTATTREXSERV; discussed here
    Lets see how Rev 50 addresses our issues.
    Thanks,
    Saurabh Bansal

  • N97 mini: Internet Radio & Digital Compass missing

    hello,
    Bought new set. Can not find Internet Radio & Hey where is the digital compass? Can not find it! Please help..
    Regards,
    Go for the best always...
    Solved!
    Go to Solution.

    Internet Radio - GONE. Not part of spoftware anymore. Ask Nokia when they'll bring it back, but it's not part of your phone (ie. you won't find it).
    Compass is there, but no compass app. Ovi Maps uses it though, so you can turn it on, click on a little circle with arrow, and the map will orient itself to the direction you're looking. I'm still waiting for Google to start using Nokia compass in their maps, so they will work like on iPhone.
    OR, go to ovi store and download free Compass Touch...

  • Radio 5800 not working after updated

    Hello,
    I have updated my Nokia 5800 with the 51.0.006 and the radio is not working anymore.
    Any suggestion? 
    Solved!
    Go to Solution.

    After doing what was suggested by Nokia: switch off, remove the battery and switch on again it works.

  • Live Internet audio stream not functioning after iTunes 10.5.3 update

    Today my iTunes listed Internet audio stream for a local radio station will not play. i did perform the iTunes update for 10.5.3 3 days ago and the stream funcitoned then, but not today. Ugh. Any hints? Thanx everso!

    Try downloading the package for new installs. the update package failed, but the new install package worked for me without any trouble.
    History:
    I began this trouble shooting exercise by selecting Download Only through the Apple Update applet. Running the msi manually did not resolve the problem. In fact, it was more frustrating because the download package would disappear after running even though it failed, and I had to download it again. "Cleanup" I suppose. <frown>
    I followed advice to remove the Apple Software Update program, reboot and re-run the msi. That did not resolve the failure.
    I then followed advice to set permissions for Administrators on registry key HKLM\Software\Micorosoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Com ponents
    then reboot and run the update msi again. This also did not resolve the failure.
    I downloaded the installer from the Apple download site as though it were a fresh install, and - voila! - it installed correctly and all content and settings were preserved. Hopefully that is all that is needed, not the steps above. Let me know! http://www.apple.com/itunes/download/

  • (Mac Mail) How to obtain Yahoo! Mail when: You're inbox dissapears or does not show after all settings seem perfectly in place.

    Hello everyone!
    Note**: I am in no way attempting to illustrate how to get FREE email listing from Yahoo! Mail, I am only reciting what I have stumbled upon. I do not know if Yahoo! actually wants this to work in Mail. but it does, so if they didn't want it to work they will patch it or something. I recommend that you take advantage of their paid service(annual) which allows POP forwarding of emails quickly and withou any need for reconfiguration.
          I hope this "fix" is not being rementioned or creates redundancy, however after hours of searching all sorts of foums(including the Apple forums ofcourse) I was unable to find a true fix. Simply put, I just got a brand new Macbook Air 13'' for Christmas 2011. I also bought a Macbook Pro 15'' back in late 2010. I was never able to get Yahoo! Mail configured even through methods of IMAP rather than POP or POP3. Oddly enough, on my Macbook Air and Pro, now, when I try to redo the Yahoo! settings, my Inbox would display messages for a matter of seconds and then the messages would dissapear. However, there was still a number next to my Yahoo! e-mail, accurately indicating how many unread messages I had. I fixed it like so:
    1) Go to www.yahoo.com-- Configure Yahoo! account via account settings to work off of IMAP rather than POP Forwarding. Do so by going into account options on the top right or left hand of your screen and clicking through the forwarding options until you see IMAP. Make sure you save your new settings! This is very simple and I feel requires no further explanation. If you become confused, let me know and I will go into detail then.
    2) Once your Yahoo! Mail account is IMAP simply go into the Mail application on OSX (Mac). On the top bar of the Mail pane click on the "Mail" option in between the Apple sign and File.  Then, Click on Preferences from that dropdown pane. When this window appears, Click on the "@" symbol that says "Accounts" right under it. This is in between General and RSS options. Under the left-hand list that says "Accounts", click on the "+" sign as opposed to the "-" sign you will see there. This will allow you to setup an account or additional accounts. A window then will appear with options:
    3) ****Make sure you ARE connected to the internet wirelessly or via ethernet for this part!****
    ---------- Full Name: (Enter Full Name Here)
    ---------- Email Address: (Type in full email address, e.g.: [email protected])
    ---------- Password: (Type in your password to your email account, this IS CASE SENSITIVE.)
    4) Now! Listen! (lol), hit create and let the mac show you the settings it has pinged back from the Yahoo! mail server. It should illustrate that your e-mail is an IMAP based email address etc. As long as the account is created with the IMAP configuration and Mail reads it as so, you have succeeded thus far.
    5) Critial Step here: Go into the Mail application on OSX (Mac). On the top bar of the Mail pane click on the "Mail" option in between the Apple sign and File.  Then, Click on Preferences from that dropdown pane. When this window appears, Click on the "@" symbol that says "Accounts" right under it. This is in between General and RSS options. Under the left-hand list that says "Accounts", click on the Yahoo! IMAP account. Close to the top of that page between the different Mail options and the account settings you will see three different bar pages: a) Account Information, b) Mailbox Behaviors and c) Advanced.
    6) Click on the Advanced tab. Do not touch anything on this page, except, IMAP Path Prefix. This is located in the middle of the Advanced page screen right above Port, where you will see |Port:   993   (Box IS checked for: USE SSL). In that IMAP Patch Prefix type the name of your Inbox(I say this because some people rename it in Yahoo!). Mine is simply "Inbox" so my configuration in Mail looks like so: | Imap Path Prefix:  Inbox |. After this, click on "General" or attempt to close the Mail options window and it will as you to save the new setting. Ofcourse, hit yes and click the Get Mail envelope and you will see your Inbox populate, assuming you have new mail.
    What this means: Test your OUTGOING mail server by sending yourself an e-mail either from your Yahoo! Mail or from another email. Thus, this will allow you tot est your INCOMING email as was now reconfigured to IMAP by seeing if you actually receive the email.
    Reason for doing so in this sequence: By letting Mail create the account it will properly import all of your mail folders you have in your Yahoo! Mail account. Obviously, your Inbox and Outbox as well as Sent and Trash folders will import but I have additional folders, for example, that also imported for putting financials or receipts into different folders for organization. Once these are populated naturally, by changing the IMAP Path Prefix you're telling the Mail application where to send your new emails. Atleast this is my understanding of it.
    Unfortuntely, I am not an officially educated 'techie", however, I have been fiddling with computers over the last 20 years and have been training myself to become Apple expert, seing as I have decided to completely convert to Apple products. Apple is just reliable. This, to me, is priceless. I truly hope I have helped you and that I have saved hours of Youtube video watching as well as forum searching for many. Should you have any questions, FEEL FREE to ask! I love helping others, hense why I have made this post(my first Apple post). Happy Holidays everyone and enjoy!

    dechamp wrote:
    What Mac Mail did was delete ALL inbox messages from my yahoo account, after one week from importing them to Mac Mail.
    The Yahoo server did exactly what you Mail program told it to do.
    Mail/Preferences/Account/Advanced - This setting is adjustable for each mail account.
    I didn't know about this feature until it was too late. I have already unchecked it for future emails.
    I was wondering if there is a way to retrieve these deleted messages back to my yahoo inbox.
    Not Really, you could forward them to your account, after you've told your mail program not to delete the emails at all, but they will show up as being from you instead of the original sender. The originals at Yahoo have been dumped and probably purged. It would take an IT manager at Yahoo to manually replace the emails, not much chance of that.
    I've already asked yahoo to "restore" my inbox to a day ago. That should help me with retrieving some of the messages back, I hope.
    Also, I was wondering about the sync feature on the Mac Mail and what will actually happen if I use it. Does it apply to mail messages, or to address book and calendar entries?
    The sync feature refers to IMAP email accounts like .Mac or .Me or an Imap gmail account. I didn't think Yahoo offered IMAP email accounts.
    Apple's MobileMe membership will let you sync your Mail, AddressBook, Calender, personal website with iWeb, etc.
    "MobileMe is a service that pushes new email, contacts, and calendar events over the air to all your devices. So your iPhone, Mac, and PC stay in perfect sync."
    http://www.apple.com/mobileme/
    I wanted to use Mac Mail, see if I liked it or not, then decide to get a MobileMe account. However, this is still a side note, since my yahoo account is my main email client.
    You seem to be very well informed, and I was wondering if I can ask you to clarify a point for me. Do you know how to archive the inbox in the Mac Mail?
    And thank you for answering my queries.

  • Internet conection (3G) not working after upgrading to iOS 6.0.1

    After upgrading my iPhone 3GS to iOS 6.0.1 my internet connection stopped working, not even the 'edge' signal is working. Can I downgrade to iOS 6.0 in iTunes? If I restore the iPhone in iTunes it will go to the older version of iOS (factory default)?

    We're all users like yourself.
    If you want to talk to someone at Apple, go to an Apple store or call 800-My-Apple.
    Have you tried Settings > General > Reset > Reset Network Settings?
    What about basic troubleshooting from the User's Guide which is reset, restart, restore (first from backup then as new)?
    Consider 6.0.1 has been out for several weeks, it's highly unlikely the issue is with 6.0.1 and more likely it is the device, the SIM, the carrier, or the network.

  • Internet browsers do not work after updating to Windows 8.1.

    I have spent several hours researching my issue, performing fixes that have worked for others, but to no avail. I have talked with 3rd party tech supports, in addition to Microsoft tech support. I also recently spent 3 hours under remote access with a helpdesk
    employee. To no avail.
    My issue:
    Recently updated to Windows 8.1. Immediately following, none of my browsers work. Internet Explorer is entirely out of commission. Firefox and Chrome, however, interestingly, are able to open simple google pages: gmail, google maps, google search - I can
    even search things that I want and results will show up... they just will not load if I click on them. The error message when I click on "More" says something along the lines of "maybe it's your firewall or antivirus wrongly detecting Chrome...",
    and I think maybe something similar for Firefox. Explorer simply says that it cannot display the page.
    So, how am I writing this? I am currently booted up in Safe Mode, with networking. Apparently it works here, which I'm hoping indicates that the issue to resolvable.
    Remedies I have attempted:
    I have restarted my computer over 60 times in the past 2 days.
    I have troubleshooted the internet connection via the button that says "troubleshoot". It says it cannot identify the problem.
    I have executed various command prompts executed as administrator: i.e. netsh winsock refresh, advfirewall refresh, something to do with ipv4, ipv6, a bunch of "IP stack resets", etc, etc.
    I have manually added chrome, firefox, and explorer to my firewall exceptions, both via McAfee and via the Windows firewall system. Both simultaneously, one at a time, etc, every combination of this.
    I have uninstalled the web browsers and reinstalled them.
    I have unintalled my antivirus and reinstalled it, and checked in between.
    I have turned my firewall off.
    I have manually inputted some kind of DNS address (8.8.8.8 and 8.8.4.4) and/or IP address (forget exactly what was asked of me to input).
    I have gone to my "Manage Devices" and updated all of my network drivers, and attempted to revert to old versions of drivers.
    There are probably more things that I have tried, I just don't remember exactly and cannot list them. Most things you can find on Google pertaining to this issue, I've tried.
    Is there anything at all that anyone can think of to fix this situation? I am about ready to refresh my computer/do a systems restore/whatever to erase everything, factory reset, even (hopefully it works, because I've read that some people have issue, i.e.
    no previous partition found or something, or no recovery media present, etc, etc).
    Before I resign to this, PLEASE FOR THE LOVE OF GOD HELP ME.
    Also, may I please note here that given the sheer frequency of this issue around the web that I've found, I think it is absolutely ridiculous and irresponsible of Microsoft not to rectify the issue. This is even 3+ months following the release of the
    update; I always lag on updating such that bugs like these are fixed before I get on the train. This update has essentially reduced my multi-hundred dollar computer to an infantile calculator/solitaire/checkers/Microsoft office LCD screen. Not to mention wasted
    2 full days of my time. 
    Sorry, just saw red there at the end and had to vent my anger. Please help.

    Hi,
    I can imagine the inconvenience you have experienced. I will try to help you in fixing the issue.
    Please test this issue in the Clean Boot environment to check if there is some conflicts with network.
    If the issue disappears in the Clean Boot environment, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.
    How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
    http://support.microsoft.com/kb/929135
    Also, to find where your problem is, I suggest you use Network Monitor tool to capture a network package:
    http://www.microsoft.com/en-in/download/details.aspx?id=4865
    Then, please upload the package here for further research.
    Note: I highly recommend you use SkyDrive to upload collected files and to post screen shots/pictures. Although you might not be used to it, SkyDrive features a lot of free advanced functionality around file storage capacity, sharing, privacy, and collaboration:
    http://skydrive.com
    Regards,
    Kelvin hsu
    TechNet Community Support

  • ValueChangeListener in Radio Button not acting after first time

    Hi,
    I am using ADF-BC-JSF in Jdev 10.1.3.3. I have a page on which there are 2 radio buttons which show blank at first. As soon as a user selects a radio button, the valueChangeListener calls up a method in the backing bean that opens a dialog for the user. User enters some text in to the dialog and clicks OK after which the window closes. If the user clicks Cancel on the dialog page, the window is still closed but radio button value is reset to blank through javascript. the problem is that it works only first time. second time it tries to autosubmit but only the constructor of the backing bean is called and not the actual function to open the window. Following is the code snippet that may be helpful.
    Radio Buttons
    <af:selectOneRadio value="#{bindings.SP11WarrantDetailsViewMetallurgistReviewStatus.inputValue}"
    layout="horizontal"
    id="metallurgistRadioBtn"
    autoSubmit="true"
    valueChangeListener="#{UploadDownloadBean.exampleOpenDialog}"
    disabled="#{ !UserInfo.metallurgist || bindings.SP11WarrantDetailsViewMetallurgistReviewStatus !=''}">
    <af:validator binding="#{bindings.SP11WarrantDetailsViewMetallurgistReviewStatus.validator}"/>
    <af:selectItem label="Approved" value="Approved"/>
    <af:selectItem label="Rejected" value="Rejected"/>
    </af:selectOneRadio>
    Function to Open the Window
    public void exampleOpenDialog(ValueChangeEvent valueChangeEvent)
    // Add event code here...
    FacesContext context = FacesContext.getCurrentInstance();
    // Create the dialog UIViewRoot
    ViewHandler viewHandler = context.getApplication().getViewHandler();
    UIViewRoot dialog = viewHandler.createView(context,"/sp11/warrant/MetallurgistNotes.jspx");
    HashMap properties = new HashMap();
    AdfFacesContext afContext = AdfFacesContext.getCurrentInstance();
    afContext.launchDialog(dialog,
    null, // not launched from any component
    null, // no particular parameters
    true, //show in dialog
    properties);
    Javscript for resetting the Radiob button
    function closeWindowOnCancel()
    if(parent.window.opener.document.getElementById("notesValueHolder").value == '' )
    parent.window.opener.document.getElementsByName("metallurgistRadioBtn")[0].checked = false;
    parent.window.opener.document.getElementsByName("metallurgistRadioBtn")[1].checked = false;
    Please suggest what can be the possible cause.
    Regards,
    Neeraj

    Hi,
    I am using ADF-BC-JSF in Jdev 10.1.3.3. I have a page on which there are 2 radio buttons which show blank at first. As soon as a user selects a radio button, the valueChangeListener calls up a method in the backing bean that opens a dialog for the user. User enters some text in to the dialog and clicks OK after which the window closes. If the user clicks Cancel on the dialog page, the window is still closed but radio button value is reset to blank through javascript. the problem is that it works only first time. second time it tries to autosubmit but only the constructor of the backing bean is called and not the actual function to open the window. Following is the code snippet that may be helpful.
    Radio Buttons
    <af:selectOneRadio value="#{bindings.SP11WarrantDetailsViewMetallurgistReviewStatus.inputValue}"
    layout="horizontal"
    id="metallurgistRadioBtn"
    autoSubmit="true"
    valueChangeListener="#{UploadDownloadBean.exampleOpenDialog}"
    disabled="#{ !UserInfo.metallurgist || bindings.SP11WarrantDetailsViewMetallurgistReviewStatus !=''}">
    <af:validator binding="#{bindings.SP11WarrantDetailsViewMetallurgistReviewStatus.validator}"/>
    <af:selectItem label="Approved" value="Approved"/>
    <af:selectItem label="Rejected" value="Rejected"/>
    </af:selectOneRadio>
    Function to Open the Window
    public void exampleOpenDialog(ValueChangeEvent valueChangeEvent)
    // Add event code here...
    FacesContext context = FacesContext.getCurrentInstance();
    // Create the dialog UIViewRoot
    ViewHandler viewHandler = context.getApplication().getViewHandler();
    UIViewRoot dialog = viewHandler.createView(context,"/sp11/warrant/MetallurgistNotes.jspx");
    HashMap properties = new HashMap();
    AdfFacesContext afContext = AdfFacesContext.getCurrentInstance();
    afContext.launchDialog(dialog,
    null, // not launched from any component
    null, // no particular parameters
    true, //show in dialog
    properties);
    Javscript for resetting the Radiob button
    function closeWindowOnCancel()
    if(parent.window.opener.document.getElementById("notesValueHolder").value == '' )
    parent.window.opener.document.getElementsByName("metallurgistRadioBtn")[0].checked = false;
    parent.window.opener.document.getElementsByName("metallurgistRadioBtn")[1].checked = false;
    Please suggest what can be the possible cause.
    Regards,
    Neeraj

Maybe you are looking for