Internet Sales - Error in R/3 system: document cannot be sent.

Hi!
Whenever I need to place a new order on the B2B application of Intenet Sales, I get this error message right at the end. I can see the order, the prices, totals, etc. But when I click on "To Order" I get this error and all prices go to 0.00 and so.
I have no exceptions marked on the J2EE logs, and the only error I can see is right on the jsp page and states:
Error in R/3 system: document cannot be sent. Call our hotline.
BUT, when I try to place an order with an order template, then I click on "to order" and everything goes OK, order is placed in R/3.
So, im lost on this. Any help will be much appreciated.
Thanks in advance!

The problem is originated because in shopadmin tab order, there are two fields related order type: Order type from SAP R/3 & Order Type (next to delivery block field). The first one is the sales order type that is goanna be generated when a sales order is created. The second field is purchase order type related to the way in which the sales document arrives from the customer (Telephone, for example). Both of them must be valid, fist one in Sales order type, transaction VOV6 and second one in program SAPLSVIM
The problem is that no matter what kind error you have in ISA R/3 Edition, the user will receive the same error message Error in R/3 system: document cannot be sent. Call our hotline, so you have to switch the backend logs on to write the real SAP error message

Similar Messages

Change B2B error message: "Error in R/3 system: document cannot be sent"

Hi experts!!
I had the requirement the B2B user not to be able to change orders from the past days.
I wrote some ABAP code in MV45AFZZ user exit and the functionality works fine! I even receive my custom error message in the B2B but before my message i also get "Error in R/3 system: document cannot be sent. Call our hotline.."
Is there anyway i can change this standard message in JAVA side???
Thank you in advance!!

In the ABAP side, set break point in BAPI_SALESORDER_SIMULATE and check the BAPIRETURN table.. Depending upon the stage and action on the order, the other RFCs you might focus on are SD_SALESDOCUMENT_CREATE or SD_SALESDOCUMENT_CHANGE. The return structure is BAPIRET2 for this set of RFC.
You might remove the "unwanted messages here.. or let them flow into the Java layer and tackle them there. That will require you to extend different xxxxStrategyR3 classes and overwrite certain methods in certain classes. The development is NOT streamlined here.
Read the classes CreateStrategyR3 - there is a method performCustExitAfterR3SimulateCall
in ReadStrategyR3 - there is a method called replaceR3MessageTexts and in change..
in ChangeStrategyR3 - there is a method called performCustExitAfterR3Call
In all these places you have to read the appropriate table that contains the message and remove it. See ReadStrategyR3~replaceR3MessageTexts for some idea..

Express document " cannot be sent : Encryption Output

Hi All ,
We are following 3 steps
1) a file is generated
2) its encrypted by running a script in background
3)encrpyted file is sent via e-mail .
While doing this , we have a received one error - Express document " cannot be sent : Encryption Output " received by Author
Please help to identify if this is an authorization error or config error ??
Regards,
Anil

Solved ...2 auth objects s_c_funct and s_log_com were missing in the role

Internet Sales error JCO_ERROR_CONCURRENT_CALL

Hi everybody,
In Internet Sales (B2B) i have thew following problem:
when i select on order and i want to change it i get a blank page.
i went to the isa.0.log and i found a JCO_ERROR_CONCURRENT_CALL. This happens both in test and in production system.
i'm running in the following system:
Application ISA
Version 4.0
Support package 9
Build time 20050824_1503
Change list number 230514
Java Version 1.4.2_06
J2EE engine version SAP J2EE Engine/6.40 PatchLevel 92160.313
Server host Windows 2003 / 5.2
OS total memory 514588672
OS free memory 353680552
Can anyone tell me what is the problem please?
Thanks in advance

This exception is thrown when trying to use the same connection at the same time in a multi threaded environment. The best way to resolve this is to use JCo's built-in connection pooling.

Invoke Web service - WSDL error "Object of type 'System.Int32' cannot be converted to type 'System.UInt64'."

Hello,
I'm having a problem when I try to load the WSDL file for the "Invoke Web Service" activity.
I'm trying to create a connection between Orchestrator 2012 R2 and Cisco Unified CM through a Web Services. When I click the WSDL file and I click the "Format Hint" button appears the following error "Object of type 'System.Int32' can not be
converted to type 'System.UInt64'."
The WSDL file that Cisco Unified CM I exported another work tools, tested and working well. In Orchestrator just gives the error.
Can anyone help with this?
Thank you
Rui

Hi,
You're going to have to use Get-AzureVM to get your specific VM object and then pipe it into Add-AzureDataDisk. See the examples here:
http://msdn.microsoft.com/en-us/library/windowsazure/dn495298.aspx
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

Internet connection error while updating os system

hey
whenever i click for updating my software an error comes saying 'there is prob with ur iternet connection. pls check ur internet connection' .
bb set- tour 9630
pls help me to sort our this prob

Hi and Welcome to the Community!
Are you making this selection on your device or when connected to the Desktop Software? If on your device, my advice is to stop...the on-device OTA update is, IMHO, dangerous. Rather, use the Desktop Software and then you can take a full backup to your computer, which will be forever preserved...the on-device update takes an on-device backup, but if anything goes wrong, that backup file is lost forever.
Please clarify exactly the steps you are taking to reach this error message. Also, please be sure to provide the exact and complete content of the error message.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Calendar Error - "You response to the invitation cannot be sent."

I'm not sure why, but for some reason when I replied on my iPone to a single instance of a recurring meeting request (change in the "location"), I started getting this error message when I had either mail or calendar open. I currently have my company's email exchange synchronize mail, contacts, and calendar with my iPhone 5.
The following post resolved this recurring error message:
golonko
First you need to find out which account the offending calendar belongs to (you can find it in the event details)
then go to settings/main,contacts,etc...
Tap on the proper account
Then disable the calendar linked with this account (confirm deleting it from the iPhone)
Finaly re-enable the calendar and let it sync.

I have a working case with Apple Tier 3; my rep is working with engineering team and may now be handed to Enterprise Team.
Thus far iOS5 Beta 3 same error although the main Exchange Account user can now accept the meeting requests, yet unfortunately the secondary Exchange Account user - in Outlook terms the full Author permissioned delagate - still CANNOT accept meeting requests intended for the main Account user.
Oddly enough iPad iOS still things the email recipient of the meeting request is the person invited to th eactual meeting. VERY odd.

System extension cannot be used - on startup?

Recently, I had to repair permissions after a error cause me not to be able to login. I did a startup from the disc and got in, but now these error messages come up;
System extension cannot be used
"/System/Library/Extensions/SymIPS.kext" was installed improperly and cannont be used. Please reinstalling it, or contact the vendor for an update... and;
"/System/Library/Extensions/SymIInternetSecurity.kext" was installed improperly and cannont be used. Please reinstalling it, or contact the vendor for an update... and;
"/System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AppleAirPortCrcm 4311.kext" was installed improperly and cannont be used. Please reinstalling it, or contact the vendor for an update... and;
"/System/Library/Extensions/IO80211Family.kext" was installed improperly and cannont be used. Please reinstalling it, or contact the vendor for an update...
not to mention now it says I don't have airport card and the internet is running slower!
I have completed further repair disk permissions.
What can I do?
Thanks.

HI,
*"System extension cannot be used"*
*"/System/Library/Extensions/SymIPS.kext" was installed improperly and cannont be used. Please reinstalling it, or contact the vendor for an update... and;*
*"/System/Library/Extensions/SymIInternetSecurity.kext" was installed improperly and cannont be used. Please reinstalling it, or contact the vendor for an update... and;*
*"/System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AppleAirPortCrc m4311.kext" was installed improperly and cannont be used. Please reinstalling it, or contact the vendor for an update... and;*
*"/System/Library/Extensions/IO80211Family.kext" was installed improperly and cannont be used. Please reinstalling it, or contact the vendor for an update... "*
Is this the results of booting from your install disk and using Disk Utility to Verify the drive, or just repair permissions?
Carolyn

System extension cannot be used - GeneIOUSBCFSubclass.kext

I just installed the iTunes 9.0.2 update. Toward the end of the install, an error message popped up:
System extension cannot be used
.../SYstem/Library/Extensions/GeneIOUSBCFSubclass.kext...
But the update appeared to complete successfully.
Any ideas?

That appears to be some (antiquated?) third party driver for an external USB device.
http://www.google.com/search?q=GeneIOUSBCFSubclass.kext

Internet Sales B2C - Display error message on the basket

Hi, I am working on developments on the Internet Sales B2C scenario. I am trying to add new checks that are to be performed after the user has clicked the "Order" button on the basket.jsp page.
I have already created the action and the BO, BOM, and Backend object and I changed the action flow so after b2c/basketcheckout.do instead of calling b2c/maintaincheckout.do the system calls my own action, and if I have an error what I am doing is calling the addMessage() on the Basket object, and then sending the action flow to b2c/basketdisplay.do.
Everything is working fine except that the messages that I add to the basket are not shown when basket.jsp is displayed and I think this is because somewhere after the b2c/basketdisplay.do action is called and before the basket.jsp page is displayed the standard deletes any messages on the basket.
Should I change my program so instead of calling b2c/basketdisplay.do I call a different action to display the basket but keep my messages?
Does anyone has any better idea than what I am doing rigth now? I would gladly appreciate any help.
The config.xml that I have looks like this:
<action path="/b2c/basketcheckout" type="com.sapmarkets.isa.isacore.action.b2c.order.MaintainBasketB2CCheckoutAction">
               <forward name="login" path="/b2c/login.jsp"/>
               <forward name="basketEmpty" path="/b2c/order/basketEmpty.jsp"/>
               <forward name="checkout" path="/b2c/basketchecktopes.do"/>
               <forward name="ordersplit" path="/b2c/busy.jsp"/>
          </action>
          <action path="/b2c/basketchecktopes" type="com.orbitel.isa.action.CheckTopes">
               <forward name="checkout" path="/b2c/maintainCheckout.do"/>
               <forward name="basket" path="/b2c/basketdisplay.do"/>
          </action>
And the coding in my action is:
UserSessionData userSessionData = UserSessionData.getUserSessionData(request.getSession());
BusinessObjectManager bom = (BusinessObjectManager)userSessionData. getBOM(BusinessObjectManager.ISACORE_BOM);
SalesDocument miOrden = bom.getBasket();
if(miResp.equals("A"))
     return mapping.findForward("checkout");
else
     miOrden.addMessage(new Message(Message.ERROR, "system.forward.info", new String[]{"Ha superado el tope de sesion"}, null));
     return mapping.findForward("basket");
Thanks
Juan

You can do this using java script throwing an alert popup or you can check if the fields are initial in oninputprocessing and fill a variable like gv_error = 'Enter values of mandatory fields.' and display the same in layout using
<phtmlb:messageBar id = "messageBar"
type = "<%= gv_severity_str %>"
text = "error"/>
See this thread for more..
How to display error messages in bsp page
search the forum before posting a new thread....

Internet Sales Rep (ISR) Analytics Error

HI,
Can any one point me to the right direction as to where to look for an error I am getting in Internet Sales Rep business package.
when i launch the ISR and click on Anlytics, I dont see anything in the screen.
first of all, what does the Analytics point to.... second, does it need any configuration or adding authorization in the backend system.
Thanks,
MK

hi
sorry for the delay..yep i configured it already with BW system with alias SAP_BW, ofcourse i dont have any crm data loaded in bw.
what i expect to see is a form giving a criteria for searching (for ex: startdate and enddate). but i see this error there.
any suggestions

Strange Error Message In Return Order - (CRM B2C Internet Sales)

I have a strange error message when creating a return order with reference to a standard order in internet sales B2C scenario.
err message: Document 900038963 doesn't have document category but (Notification E V2 068)
and the standard order 900038963 is error free.

Hi,
I notice there is a Z class being called.
Method: IF_EX_ORDER_SAVE~PREPARE of program ZCL_IM_PRICE_ADJUSTMENT=======CP
You should check this customized class.
Cheers,
cady.

FTP Error in Internet sales during product catalogue replication

Hi all,
I am configuring the internet sales for demo purpose on CRM 2007-IDES system, when i am replicating the catalogue to isa it gives error regarding FTP.
Please give me the idea if iam using internal system not public ip at this time FTP server required or not.
If yes then how i can install this software and connect with crm system.
Please help
Regards
Apoorva

hi,
during catalog replication the product pictures will be copied to the TREX server. The replication process uses ftp for copying the pictures. You can enable if you would like to replicate the pictures too. Try to disable this first and your replication should work fine.
Regards
Michael

A network error occurred while accessing this document on the internet

Dear all,
I am now facing a very unusual problem that, when I try to open a pdf file from internet, it says: "A network error occurred while accessing this document on the Internet. Would you like to close the document or reload it?". Here's my situation:
Browser: IE8 (or Chrome 35.0.1916.153)
Adobe Reader: 11.0.0
OS: Win7
1.Directly open from IE. Says: "A network error occurred while accessing this document on the Internet. Would you like to close the document or reload it?"
2.Try to download(Save AS). In IE, says: "The connection was reset The connection to the server was reset while the page was loading"; In Chrome, nothing happened, but still can't download.
3.Try to disable the "PDF Reader Addon" in IE8. First the browser needs to download the PDF file, but failed, see point 2.
1.I can open the same PDF file from another network, that is, out of my company.
2.I can open another PDF file in the network of my company, but the pdf is created by another scanner
3.All PDFs from both scanner can be opened locally.
So, here's the possible problem, the network settings, and(or) the PDF. Does anyone ever meet this situation, please help?
Thank very much.
Li

Rave,
IE: 8 & 9
Adobe Acrobat Pro/Acrobat Reader 10.x & 11.x
Chrome: work fine
So the answer is to manually enable and disable websites based on whether the pdfs open within the browser. That doesn't seem like a great long-term solution to have have our users to manually enable / disable browser integration. We have web applications that work better with browser integration turned on. Is this something that Adobe will fix or is it an IIS/IE issue.
It appears the Adobe removed the #1 config option that you lised in the new 11.x versions of both products. The manage Add-ons does not disable the browser integration on the new Adobe versions.

Log In Error in Internet Sales R/3 Edition

Hi,
I´m working with Internet Sales R/3 edition, not CRM.
I´ve created a contact (Ej.'1') assign to a customer.
I´ve created an internet user (tx SU05) with the same contact code ('1').
When I try to access to the web, I enter '1' in the user name and the SU05 password but I get this error message:
"Runtime error. Contact the administrator".
Is there some customizing missing??
Can somebody give me a hint?
Thanks in advance,
Valle.

Hi Valle:
First, have you configure your ISA R/3 via XCM? Third, is your user is set as SU05 user which you can verify fom IMG? Third, did you try to create an user via using internet user administration, a web version? If you tried them all and you still have the same problem, enable your ABAP debuger then you should be able to find out the root problem.
good luck,
Chao-sheng

Internet Sales - Error in R/3 system: document cannot be sent.

Similar Messages

Maybe you are looking for