Interpreting the DBMS_PROFILER total_time column...

Hi ,
the dbms_profiler package gives the opportunity to find out the total time the db server has executed each line of a pl/sql program....
However , is it right to add all the total_time period of one run and the total_time period of the second run and compare them....from the table plsql_profiler_data..???
Thanks...
Sim

Thanks....
I have read that there is also a script -provided by Oracle - named as "profsum.sql" .. but i cannot find it..... in my Oracle_Home dir.....
Thanks... anyway for the source you provided.....
I have also found that the table plsql_profiler_runs does contain the total time (in nanoseconds) each run executed , whereas the table plsql_profiler_data contains the total time for each line of executed code.... I have computed the total time for each line of the code (table plsql_profiler_data ) executed but was different from the total time of each run in the table plsql_profiler_runs.... Why is that..?????
Sim
Message was edited by:
sgalaxy

Similar Messages

Cannot Interpret the data in the file

Hi,
I need to upload rate routing and I have created a BDC program using a sample recording.
While I am uploading the data from the flat file, I am getting an error message " Cannot Interpret the data in the file ".
Please help me where I might have gone wrong. I have checked with template in the flat file and it is correct.
Please do the needful.
Thanks,
Ranjan R Jinka
Edited by: Ranjan Jinka on Apr 29, 2011 8:55 AM

Hai Ranjan,
Please, Check this
" Can not interpret the data in file " error while uploading the data in DB
- Check the heading of the excel column and filed used in program.
If possible, please paste the program so the viewers have a better idea and you will get the exact solution.
Regards,
Mani

Can we change the cryptic MESSAGE column in email notifications?

Hello,
Is there any way to control the way the cryptic message column (which is the logic behind the business rule) shows up in email notifications. A message such "IF AND true THEN Valid" does not mean much to users? Am I missing something?
Jim

The message format is controlled by style sheets stored as text values in mdm.tblSystemSetting.
This query will show you the values in the MDS database:
SELECT
SettingValue
FROM [mdm].[tblSystemSetting]
WHERE SettingName
IN ('ValidationIssueHTML',
'ValidationIssueText')
One is for HTML email formats and one is for plain text. If you know how to interpret the XML style sheets, you could try changing these values as desired. Careful!
Val Lovicz
http://www.profisee.com
[email protected]
As the original creators of Microsoft MDS, Profisee's Master Data Maestro provides a range of enterprise-grade functionality to ensure MDS project success.

" Can not interpret the data in file " error while uploading the data in DB

Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

Dear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
         internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
      wa LIKE LINE OF itab,
      wa1 like line of itab.
                   variable declaration
DATA: v_excel_string(2000) TYPE c,
       v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
        delimiter TYPE c VALUE ' '.         " delimiter with default value space
     read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
    WHILE ( sy-subrc EQ 0 ).
      READ DATASET v_file INTO wa.
      IF NOT wa IS INITIAL.
        append wa TO itab.
      ENDIF.
      CLEAR wa.
    ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
     TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab.

While defining a columnar table, what is the purpose of column store type

Hi folks
I have two questions related to columnar table definition.
1. What is the purpose of column store type.
While defining a columnar table, what is the purpose of column store type (STRING ,CS_FIXEDSTRING,CS_INT etc) , when I define a table using the UI I see that the column is showing STRING but when I goto EXPORT SQL it does not show. Is this mandatory or optional ?
2.VARCHAR Vs. CHAR - In the UI when I create the table I do not see the CHAR option , but I do see lot of discussion where people are using CHAR for defining the columnar table. Not sure why UI dropdown does not show it. I also read that we should avoid using VARCHAR as those columns are not compressed, is that true, I thought the column store gives compression for all the columns. Are there certain columns which cannot be compressed .
Please let me know where I can find more information about these two questions.
Poonam

Hi Poonam
the CS_-data types are the data types that are used internally in the column store. They can be supplied but it is not at all required or recommended to do so.
SAP HANA will automatically use the correct CS_-data type for every SQL data type in your table definitions.
To be very clear about this: don't use the CS_-data types directly. Just stick to the SQL data types.
Concerning VARCHAR vs CHAR: fixed character data types are not supported anymore and don't show up anymore in the documentation.
I have no idea why you believe that VARCHAR columns are not compressed but this is just a myth.
create column table charcompr (fchar char(20), vchar varchar(20));
insert into charcompr (
    select lpad ('x', to_int (rand()*20), 'y'), null from objects cross join objects);
-- same data into both columns
update charcompr set vchar = fchar;
-- perform the delta merge and force a compression optimization
merge delta of charcompr;
update charcompr with parameters ('OPTIMIZE_COMPRESSION' ='FORCE');
-- check the memory requirements
select COLUMN_NAME, MEMORY_SIZE_IN_TOTAL, UNCOMPRESSED_SIZE, COUNT, DISTINCT_COUNT, COMPRESSION_TYPE
from m_cs_columns where table_name ='CHARCOMPR'
COLUMN_NAME    MEMORY_SIZE_IN_TOTAL    UNCOMPRESSED_SIZE   COUNT   DISTINCT_COUNT COMPRESSION_TYPE
FCHAR       3661                    70285738            6692569 20              RLE
VCHAR       3661                    70285738            6692569 20              RLE
We see: compression and memory requirements are the same for both fixed and variable character sizes.
- Lars

How can I create a document with two columns in which the text in the left hand column flows to the left column on page 2,3 etc, and doesn't interfere with the text I want to place in the right? Pages 5.

I'm using pages 5 and want to comment in a right hand column, on a (latin) text which I wish to place in a left hand column.
Ideally I'd like to be able to copy and paste the latin text and see it flow over into the left hand column on multiple pages.
At the moment it is impossible for me to keep the text only in the left hand column Any help!?
B

Columns do what columns do, flow from the bottom of the left hand column to the top of the right hand next column. So won't do what you want.
Your tag says you are using OS X 10.5.8 but you say you are using Pages 5 so one or the other is not correct.
If you migrated up to Pages 5 what did you do with your previous Pages '08 or '09?
Because Pages 5 is missing over 100 features, one of which is Textbox linking, that would allow to flow down through a series of Textboxes set up like columns.
What you can do is run the Latin text down a narrow document to the left and add individual Textboxes to the right and put your English translations in those. The Latin will flow but the English will not.
Peter

How to find the number of columns in an internal table DYNAMICALLY ?

Hi,
How to find the number of columns in an internal table DYNAMICALLY ?
Thanks and Regards,
saleem.

Hi,
you can find the number of columns and their order using
the <b>'REUSE_ALV_FIELDCATALOG_MERGE'</b>
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
   I_PROGRAM_NAME               = sy-repid
   I_INTERNAL_TABNAME           = 'ITAB'
   I_INCLNAME                   = sy-repid
changing
    ct_fieldcat                  = IT_FIELDCAT
EXCEPTIONS
   INCONSISTENT_INTERFACE       = 1
   PROGRAM_ERROR                = 2
   OTHERS                       = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif
now describe your fieldcat . and find no of columns.
and their order also..
regards
vijay

Is their any limit on the number of column updates in a update statement!

Hello All,
Is their any limit on the number of columns to set in a single update statement.+
am using oracle 11g .
example :-
UPDATE FMLY SET as_comp1 = v_as_comp1 , as_comp2 = v_as_comp2, as_comp3 = v_as_comp3, as_comp4 = v_as_comp4 , as_comp5 = v_as_comp5 , perslt18 = v_perslt18 , persot64 = v_persot64 , fam_size = v_fam_size , numchild = total_children , C_AGE1 = v_c_age1, C_AGE2 = v_c_age2, C_AGE3 = v_c_age3, C_AGE4 = v_c_age4 WHERE FAMID = fmly_famid(i) ;
and also is it good practice to issue single update or multiple updates ?
example for the above update i can have multiple statements like .. does the performance matters if so which is good
UPDATE FMLY SET as_comp1 = v_as_comp1 , as_comp2 = v_as_comp2, as_comp3 = v_as_comp3, as_comp4 = v_as_comp4 , as_comp5 = v_as_comp5
WHERE FAMID = fmly_famid(i) ;
UPDATE FMLY SET perslt18 = v_perslt18 , persot64 = v_persot64 , fam_size = v_fam_size
WHERE FAMID = fmly_famid(i) ;
UPDATE FMLY SET numchild = total_children WHERE FAMID = fmly_famid(i) ;
UPDATE FMLY SET C_AGE1 = v_c_age1, C_AGE2 = v_c_age2, C_AGE3 = v_c_age3, C_AGE4 = v_c_age4 WHERE FAMID = fmly_famid(i) ;
thanks/kumar
Edited by: kumar73 on Sep 25, 2010 8:38 AM

If you can do it in a single SQL statement then you should do that.
Here's a mantra that I found to work out pretty good:
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:73891904732164

Can you help me interpret the following lines in UPDATE rule?

Hi,
Can you help me interpret the following lines in UPDATE rule?
1. What is the role of role of u201CCHANGING RESULT.u201D and u201CCHANGING lc_local_value.u201D?
2. What is the role of the CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY', in particular the Exporting and Importing parts?
3. Can I say that u201CCOMM_STRUCTURE-ORDER_VALu201D in the subroutine is passed to u201Clc_document_valueu201D in the u201CFORM loc_curr_convertu201D; and further passed to u201Cforeign_amountu201D in the u201CCALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'u201D?
4. Finally, what becomes of my original u201CActual Goods receipt quantityu201D( 0GR_QTY ) which I am writing the routine for? I donu2019t see any where in the code that it is being referred to? Do any of these codes affect the value of 0GR_QTY?
5. Also, if there are 3 different subroutines in the INCLUDE and I am making the change described in #4 above, how do I know which of the 3 subroutines to call?
===============================
===============================
So I am reviewing a transfer routine in for u201CActual Goods receipt quantityu201D and routine an INCLUDE statement: INCLUDE RS_BCT_MM_UPDATE_RULES.
The update rule also includes the following properties to run the following subroutine in the Include:
IF u2026..
perFORM LOC_CURR_CONVERT
           USING    COMM_STRUCTURE-ORDER_VAL
                    COMM_STRUCTURE-DOC_DATE
                    COMM_STRUCTURE-ORDER_CURR
                    COMM_STRUCTURE-LOC_CURRCY
                    COMM_STRUCTURE-EXCHG_RATE
           CHANGING RESULT.
I verified in the INCLUDE (RS_BCT_MM_UPDATE_RULES) and the subroutine is as follows:
FORM loc_curr_convert
USING    lc_document_value
           lc_date
           lc_document_currency
           value(lc_local_currency)
           lc_rate
CHANGING lc_local_value.
conversion of lc_rate from floating-point to decimal. Necessary for *
call of CONVERT_TO_LOCAL_CURRENCY.
data lc_rate_dec type p decimals 5.
lc_rate_dec = lc_rate.
IF lc_document_currency = lc_local_currency
no conversion necessary -> Main case 1
    AND NOT ( lc_document_currency IS INITIAL
           OR lc_local_currency IS INITIAL ) .
    lc_local_value = lc_document_value.
ELSEIF NOT ( lc_document_currency IS INITIAL
OR lc_local_currency IS INITIAL OR lc_date IS INITIAL ) .
conversion necessary with lc_date -> Normally not possible
    CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
      EXPORTING
        date                 = lc_date
        foreign_amount       = lc_document_value
        foreign_currency     = lc_document_currency
        local_currency       = lc_local_currency
        rate                 = lc_rate_dec
      IMPORTING
      EXCHANGE_RATE        =
        local_amount         = lc_local_value
      EXCEPTIONS
        NO_RATE_FOUND        = 1
        OVERFLOW             = 2
        NO_FACTORS_FOUND     = 3
        NO_SPREAD_FOUND      = 4
        DERIVED_2_TIMES      = 5.
    IF sy-subrc NE 0.
message a802 with lc_date lc_document_currency lc_local_currency
                    sy-subrc.
    ENDIF.
ELSE.
if conversion not possible -> assign target values
    lc_local_value = lc_document_value.
    lc_local_currency = lc_document_currency.
ENDIF.
ENDFORM.

HI,
Thanks so much the explanations.
I just verified again on our dev system and the update rule for 0GR_QTY (Actual goods receipt quantity) include the following:
    perFORM QUANTITY_CONVERT
       USING    COMM_STRUCTURE-CPQUAOU
                COMM_STRUCTURE-po_UNIT
                COMM_STRUCTURE-base_uom
                COMM_STRUCTURE-numerator
                COMM_STRUCTURE-denomintr
       CHANGING RESULT
Now, in the include, I also found:
FORM QUANTITY_CONVERT
USING    QC_SOURCE_VALUE
           QC_SOURCE_UNIT
           VALUE(QC_TARGET_UNIT)
           QC_UMREZ
           QC_UMREN
CHANGING QC_TARGET_VALUE.
i. Does it mean it actually does quantity conversion?
ii. If you have access to the INCLUDE I will appreciate some hints on what the subroutine QUANTITY_CONVERT is doing. It does not appear do to be saying anything about quantity conversion; but it is supposed to be doing something with the parameters being passed from the update routine.
iii. In your response to #5, after all the computation in the INCLUDE, what comes back to the Update rule i.e. what comes back to become the value of 0GR_QTY?
Is it the u201CRESULT.u201D in the update rule or u201CQC_TARGET_VALUE.u201D in the subroutine in the INCLUDE.
iv. So, am to create an Update rule for 0PSTNG_DATE and the source is BUDAT; and I need to write a routine using the include INCLUDE RS_BCT_MM_UPDATE_RULES.
I looked through the INCLUDE and identified all the subroutines in this INCLUDE as follows:
QUANTITY_CONVERT
LOC_CURR_CONVERT
GET_WEEK
WEEK_DAY
QUARTER_DAY
--Does it mean that to use this subroutine, I can only use the USING parameters of one of these listed subroutines?
--Also, does it mean that because 0PSTNG_DATE is a date, I can only use one of
GET_WEEK
WEEK_DAY
QUARTER_DAY
--Or, are there other includes to be used for 0PSTNG_DATE
Thanks

How can i open a PDF bank statement in numbers so that the rows and columns contain properly aligned data from statement?

how can i open a PDF bank statement in "numbers" so that the rows and columns contain properly aligned data from statement?

Numbers can store pdfs pages or clippings but does not directly open pdf files. To get the bank statement into Numbers as a table I would open the bank statment in Preview (or Skim) or some pdf viewer.
Then hold the option key while selecting a column of data.
Then copy
Then switch to numbers and paste the column into a table
Then repeat for the other columns in the pdf document
It would be easier (in my opinion) to download the QFX or CSV version from your bank

How to Change the position of Column in ALV report

Hi Follks,
    Is is possible to change the position of column in ALV report?.If yes then how?
    Basically my requirement is, that user want afacility where , he should be able to change the position
    of column aftre he runs the report.
    Eg: After running the report , user felt that column 5 should be at position 2 , in that case he should
           be able to drag column 5 at position 2 and vice versa.
    Please help me, how to solve this issue.
    Note : I am using NW 7.0 SP 9
    Regards
    PG
Edited by: PG on Apr 13, 2009 11:10 AM

HI PG,
do below whie filling the filed catlog
wa_fieldcat-fieldname        = 'Field1".
wa_fieldcat-COL_POS = '1',
append wa_fieldcat to it_fieldcat.
wa_fieldcat-fieldname         = 'Field2".
wa_fieldcat-COL_POS = '2',
wa_fieldcat-fieldname         = 'Field3".
wa_fieldcat-COL_POS = '3',
Thanks!

SSRS 2005 - Dynamically control the width of columns in Matrix report or Hide any column

Hi All,
I just want to hide some column without having white space in Matrix report in SSRS 2005. Although I am aware of that perhaps this feature is not available on SSRS 2005. So, I just want to know if we can handle the width of column dynamically(using expressions)
in matrix report?
Please help. Thanks in Advance.
Regards
Kumud

Hi Kumud,
Based on my test, SSRS is not support column dynamically width. It has property “CanGrow” of text box. If we configure the property to True, it will wraps to next line if needed. In SSRS 2008, we can hide some columns without white space. If possible, I
recommend you update your SSRS 2005 to SSRS 2008.
There is a similar issue, you can refer to it.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/9e6043f1-c458-4540-be59-d37b02feab8a/dynamic-column-width-for-a-report?forum=sqlreportingservices
Alternatively, I recommend you that submit a wish to the Microsoft Connect at
https://connect.microsoft.com/SQLServer/Feedback. Your feedback is valuable for us to improve our products and increase the level of service provided.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

I followed previous keylogger detection instructions from an older post - how do I interpret the results that appeared in Terminal?

I have a Macbook pro that I suspect my exhusband installed keylogger software on. I followed the keylogger detection instructions posted on an older post, but I do not know how to interpret the Terminal results. What should I be looking for in the strings that result?

You don't have an off-the-shelf commercial keylogger installed. I can't rule out a well-hidden rootkit. That would only be possible If the attacker is a computer expert, or if he had help from an expert. If you suspect that, you'll either have to consult an expert yourself or (less expensively) erase your hard drive, reinstall OS X and all your other software from known-good copies, and restore only your documents and settings from a backup.
I should add that there are hardware keyloggers on the market that don't install any software at all. The cheap ones can't be accessed remotely, but with enough money you can buy pretty much anything. A highly motivated attacker could plant listening devices in your home, your car, or your office.

I cannot change song order on playlist with highlight and drag. I have turned off shuffle and highlighted the far left column( up/down arrow) of playlist. My mac pro is running 10.5.8 and am using itunes 10.4.

I cannot change song order on playlists (old or new) with highlight and drag. I have turned off shuffle and highlighted the far left column (up/down arrow) of playlist. My mac pro is running 10.5.8 and am using itunes 10.4. I can't drag and drop "music" to "playlist" but can right click and get the option to "add to playlist." No such option for moving song within playlist, only the up and down arrow which moves song from top to bottom list, so if it is #4 from top it will move to #4 from bottom. Stupid I know. I spent over an hour with Apple support, reinstalled itunes, restarted and rebooted computer. Networked with my laptop which is running 10.6.8 and itunes 10.4 and it can drag and drop. The final Apple support solution was to reinstall my operating system. I would prefer not to. Any other ideas?

After looking at other people's posts, I think it's official: there is a bug. Itunes support said I should not have lost the drag/drop tool and I haven't on the laptop that is running itunes 10.4 and operating system 10.6.8. I chatted with someboby who lost both his drag/drop and side scroll and what we have in common is a wacom tablet for a mouse. My laptop is a wireless mouse. I reinstalled whatever updated driver that wacom has out there, shut the system down for night, hoping for magic, but alas none to be had. So if I want to change song order, I network the laptop and desktop, share the screen on the laptop, drag and drop to my heart's content and curse Apple for making me work this hard to find the tool that was once at my fingertips. Apple also let me know that if I want to share songs in household that the hundreds on songs that were purchased for .99 need to be repurchased for another .30. Maybe Apple is holding my drag/drop tool captive til I pay up the money or Maybe the next update will fix the problem, I for one give up for now.

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns but I can cut and paste them so I know they are still there. Has this happened to others

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet. I have charts and other stuff related the the original table so I need to figure out why I can only see from column C forward. I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?

I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).

Interpreting the DBMS_PROFILER total_time column...

Similar Messages

Maybe you are looking for