Intrastat - statistical value without GRWR

Hi all,
i have a problem with intrastat declaration.
If invoice hasn't GRWR condition, in VE01 I found the lines about this invoice and the statistical value is the same of net value.
I don't understand.....
Thanks.
Marianna

Hi
See Note 1016386 - Intrastat for Romania, it has a useful attachment with customizing steps for INTRASTAT. If you need correct the data, see SAP Note 303984 - Correct use of EXIT_SAPLV50G_001 and EXIT_SAPLV50G_002. These enhancements are useful to complete or change data related with foreign trade.
I hope this helps you
Regards
Eduardo

Similar Messages

  • Statistical Value in MEIS for INTRASTAT reporting

    Hello,
    From reveiwing related posts I understand that the statistical value on the INTRASTAT report comes from a system default exchange rate that uses the average exchange rate from the border crossing rate (GRWR condition on the PO) and the exchange rate on the invoice.
    What is the exact calculation that is being used to determine the statistical value on the MEIS report?
    Thanks,

    Thanks very much for the link.
    We do have the GRWR conditions set up, and the statistical value is populating correctly on the PO. 
    The issue I'm having is that I can't properly explain how the reported statistical value (VEIAV- GRENZEWEAK) is calculated.
    For example:
    VEIAV - GRENZWEAK is 5,405.86 SEK
    GRWR on PO   572.03 EUR   5,299.22 SEK    (Ex rate: 9.26389)Goods Receipt  504.79 EUR   4,681.78 SEK    (Ex rate: 9.27470)
    Freight               40.00 EUR       370.99 SEK   (Ex rate: 9.27470)Invoice              503.00 EUR   4,770.43 SEK    (Ex rate: 9.48395)
    Do you know how SAP arrives at 5,405.86 SEK with these inputs?
    Thanks,

  • Statistical value GRWR

    hi all,
    I have maintained condition record for condition type GRWR for import purpose with the relevant inco terms.  But the same is not getting copied to statistical value in import data, and also not coming in MEIS report.  Any suggestions please

    Can you explain a little more, this condition type is not coming in PO or when you post MIGO. To get it in PO, apply the condition there and this condition will come in the printout, but while doing MIGO as the statistical check is on, you will not see any postings for this condition.

  • Intrastat - The statistical value of the document is zero - how to update?

    Dear gurus,
    I have a problem in Intrastat and maybe you can help me.
    When running VE01, I have incomplete billing documents with the message EIP020 'The statistical value of the document item is zero'.
    How can I update these billing documents? How can I prevent it from happenning in the future?
    Thank you in advance for your help

    Please.....anybody knows the answer for this issue?

  • Statistical value GRWR is 0 in STO- it should be equal to material cost

    Hi
    I am using STOs (Stock transport orders with customized document type) within EU, crossing the borders of EU countries. GRWR value on STO is 0 due to Z calculation schema (which reads PIR condition type but it does not pass this value to GRWR). I applied oss note 78222 to STO calculation schema however it does not update successfully GRWR using Z schema. It only works with SAP standard schema.
    Are you aware of any other solution than the one described on note 78222?
    Thanks.

    Hi,
    Can you check note 509325 - Condition GRWR for purchase orders not found.
    The note indicates the following;
    Reason and Prerequisites
    The problem is caused by incorrect requirement in access sequence GRWR assigned to condition GRWR.
    Solution
    Call Transaction M/07. Select the access sequence GRWR and change the requirement for "Incoterms (plant specific)" (Access 10 / condition table 48) from value 7 "Domestic Business" to value 8 "Export business".
    Regards

  • Item category related to Quotation, Statistical value field

    Hi All,
    IN my Project, Item category Y003 which is used in creation of Quotions, for which Statistical value is 'X' which means "No cumulation - Values can not be used Statistically". My requirement is I need to change this filed value to 'Y' which means " No Cummulation - Values can be used statistically". If I change this filed value, it will solve issue currently I am facing but I would like to know what are the other implications.
    Could any one of you please let me know what will be implications if I change Statistical value from 'X' to 'Y'.
    Thanks in Advance
    Anil

    Hello,
    The maintain Functionality of this field is to ADD the Item values to the Sales document header values
    If the value is Blank then all the item values will be added to the header values
    If the Values is X then No Cummulation and the values are not statistical
    If the Value is  Y then No cummulation and the values are statistical
    Apart from the above there is no impact in the sales document

  • How to get the day as numeric value without formatting the date?

    Hello,
    to reduce the costs of a sql-statement I need to get the day of a date-value as number (to compare it to a numeric value) without any formatting. Every formatting results in a full table scan of the table with the date field. Is there any function to solve this problem?
    Oracle version is 11g.
    Thanks Carsten

    CarstenDD wrote:
    select T1.SYSID from T2,T1
    where T2.SysT1 = T1.SYSID
    and T2.Date1 < '01.03.2011' --German date format
    and to_number(to_char(T2.Date2,'DD')) = 1
    and T2.Inactive = 0
    The explain plan shows a full table scan on T2. With EXTRACT(DAY FROM T2.Date2) there is no difference.It probably would and should in any case.
    Look at your predicates, which of them would reduce the resultset to a fair size compared to the total number of records in the table?.
    - You may have a huge number of records when you say date less than
    - Of these perhaps one seventh have day = 1
    - My guess is that most have Inactive = 0
    Besides, you should not rely on implictit char to date conversion, always use TO_DATE
    How many records are in the table? - How many will that query return?
    Regards
    Peter

  • The maximum value of a maximum value without making two querys of the same

    Hi,
    In the table cmp_lineas_cotizacion i need to take only rows with the maximum lc.mto_precio_venta of the maximum l.fec_ini_vigencia_costo of l.cod_producto, but I have the problem that cmp_lineas_cotizacion is a very load table with take to much resources of the database, I can't modify or agregate indexes, so I need a way to make this query more efficient. I want to find a way to replace the last 6 lines of this query and make it faster.
    select b.segment1 || '.' || b.segment2 as ITEM,
            case when b.organization_id in (125,89,90,92,95,97,99,101,104,106,108,110,112,115,83,85,
                                                        87,88,91,93,94,96,98,100,102,103,107,109,111,113,114,116,
                                                        117,120,123,124,128,130,132,134,135,133,131,129,118,182)
                      then 1
                 when b.organization_id in (105, 126)
                      then 2
            end as ZONE_ID,
            replace(l.mto_precio_venta,',','.') as STANDARD_RETAIL,
           'VEF' as STANDARD_RETAIL_CURRENCY,
            case when b.primary_unit_of_measure like '%KG%' then 'KG'
                 when b.primary_unit_of_measure like '%Kg%' then 'KG'
                 when b.primary_unit_of_measure like '%UND%' then 'EA'
                 when b.primary_unit_of_measure = 'Kilogramo' then 'KG'
                 when b.primary_unit_of_measure = 'Litro' then 'L'
                 when b.primary_unit_of_measure = 'Unidad' then 'EA'
                 else null
            end as STANDARD_UOM,
            case when l.Mto_precio_venta_cm_emp is not null then replace(l.Mto_precio_venta_cm_emp,',','.')
                 else '0'
            end as SELLING_RETAIL,
            'VEF' as SELLING_RETAIL_CURRENCY,
             case   when b.PRIMARY_UNIT_OF_MEASURE like '%Barril%' then 'BA'
                    when b.PRIMARY_UNIT_OF_MEASURE like '%Bolsa%' then 'KG'
                    when b.PRIMARY_UNIT_OF_MEASURE like '%Bulto%' then 'BE'
                    when b.PRIMARY_UNIT_OF_MEASURE like '%Caja%' then 'CS'
                    when b.PRIMARY_UNIT_OF_MEASURE like '%Docena%' then 'CS'
                    when b.PRIMARY_UNIT_OF_MEASURE like '%Kg%' then 'CS'
                    when b.PRIMARY_UNIT_OF_MEASURE like '%Kilogramo%' then 'CS'
                    when b.PRIMARY_UNIT_OF_MEASURE like '%Litro%' then 'Po'
                    when b.PRIMARY_UNIT_OF_MEASURE like '%Paquete%' then 'PACK'
                    when b.PRIMARY_UNIT_OF_MEASURE like '%Unidad%' then 'CS'
                    else 'CS'
            end as SELLING_UOM,
            null as MULTI_UNITS,
            null as MULTI_UNIT_RETAIL,
            null as MULTI_UNIT_RETAIL_CURRENCY,
            null as MULTI_SELLING_UOM,
            null as LOCK_VERSION
    from cmp_lineas_cotizacion l,
         inv.mtl_system_items_b b
    where b.segment1 || '.' || b.segment2 = l.cod_producto
          and (l.cod_producto in ((select codigo
                                 from tmp.viveres_vegetales)
                                 UNION
                                 (select codigo
                                 from tmp.genericos)
                                 UNION
                                 (select codigo
                                 from tmp.hijos_genericos)))
    and l.fec_ini_vigencia_precio > to_date('01/09/2008','DD/MM/YYYY')
          and (b.segment1 || '.' || b.segment2, l.fec_ini_vigencia_costo, l.mto_precio_venta) in
                          select lc.cod_producto, max(lc.fec_ini_vigencia_costo), max(lc.mto_precio_venta)
                          from  cmp_lineas_cotizacion lc
                          where lc.fec_ini_vigencia_precio > to_date('01/09/2008','DD/MM/YYYY')
                          group by lc.cod_producto
                          )

    Without table definitions, input data, and expected output, it's hard to test. But I would expect that analytic functions would be what you're after (assuming that omitting the "l.cod_producto in" clause from your main query in the subquery where you are getting the MAX values doesn't change any results). Something like
    SELECT <<all your columns>>,
           l.fec_ini_vigencia_costo,
           l.mto_precio_venta,
           max(l.fec_ini_vigencia_costo) over (partition by l.cod_producto) max_vigencia_costo,
           max(l.mto_precio_venta) over (partition by l.cod_producto) max_precio_venta
      FROM <<the rest of your query>>will include the MAX values and the current row values without needing to hit the table a second time. Then you should be able to do
    SELECT <<list of columns>>
      FROM (<<whole query from the last step>>)
    WHERE fec_ini_vigencia_costo = max_vigencia_costo
       AND mto_precio_venta = max_precio_ventaJustin

  • Any std funtion(s) for Zero-padded, 2 decimal value, without the deci point

    Hi,
    We want Zero-padded, two decimal value, without the decimal point. For example if it is 14.31, we need 001431.
    I have done "multiply" with 100 and "formatNumber" as '000000'
    SFIeld --> multiply * 100 --> formatNumber (000000) --> TField
    It works good for values with decimal like above 14.31, does it work for everything else too? I mean for 12 it is populating as 001200. Is this best approach? Is there any other std funtions or UDF sample available?
    Regards,
    N@v!n

    >
    N@v!n Kumar wrote:
    > Hi,
    >
    > We want Zero-padded, two decimal value, without the decimal point. For example if it is 14.31, we need 001431.
    > I have done "multiply" with 100 and "formatNumber" as '000000'
    >
    > SFIeld --> multiply * 100 --> formatNumber (000000) --> TField
    >
    > It works good for values with decimal like above 14.31, does it work for everything else too? I mean for 12 it is populating as 001200. Is this best approach? Is there any other std funtions or UDF sample available?
    >
    > Regards,
    > N@v!n
    public void convert_number(String[] FieldValue,ResultList result,Container container){
    FieldValue = FieldValue * 100;
    result.addValue(FieldValue);

  • Get Reporting Statistics: What resulting statistic values?

    Cisco CRA Editor 3.5(3)
    In the script we are doing a " Get Reporting Statistics " step to get the agent state
    What resulting statistic values?
    "Ready" does not approach

    Create a String variable to store the agent state and set Result Statistic in the Get Reporting Statistic step to this variable. You can then reference this variable in future steps such as If AgentState == "Ready".
    Hope this helps. If so, please rate the post.
    Brandon

  • How to add a Picklist/Drop down in a page with values (Without Personaliz)

    hi,
    i am very very new to OAF ....please help me out on the below requirement....
    Please suggest me how to add a pick list/drop down field to a page, with some values. (without personalization)
    And the second one is when ever i'll chose a value from the drop down the page will reload and display a message on the page.(messages are different for the different values)
    Thanks
    Prakash

    Prakash
    As mentioned by Anil you can use the above link for new poplist generation through extension. As far as reloading the page in that case you need to make use of PPR for that item.Do refer dev guide for more details
    You can use below code for creating poplist in processRequest of your extended controller
    OAMessageChoiceBean mcb = (OAMessageChoiceBean) createWebBean(pageContext, MESSAGE_CHOICE_BEAN);
    mcb.setPickListViewUsageName("TestVO");
    mcb.setListValueAttribute("LookupCode");
    mcb.setListDisplayAttribute("Meaning" );
    mcb.setID("test");
    mcib.setFireActionForSubmit ("event1",null,null,false, false);//This is event that cause reload of pageYou can handle the event in pfr method
      if("event1".equals(pageContext.getParameter("event")))
    }Thanks
    AJ

  • How to display all distinct values without duplicates.

    Hi Pros,
          I want to present a values list in dashboard, but this list have much duplicates, so when dispalying, I want to display all distinct values without duplicates.

    Hi,
    You can avoid the duplicates from the source side or use a filtered row option in the component.
    Arun

  • Filter on attribute of 0MATERIAL filters charac. values without master data

    Hi SAP-Gurus,
    I've a problem while executing a query (this query is based on a MultiProvider).
    I got the message "Filter on attribute of 0MATERIAL filters charac. values without master data" and I don't know why.
    When I don't use the filter on the navigation attribute, the query can be executed without any errors, bute when I set the filter, the warning message comes again.
    Thank you all,
    Clemens

    Dear all SAP Gurus,
    we've solved this problem and this is the solution:
    The warning is triggered by the method CL_RSDRV_ODS_QUERY-PROCESS_SFC_WITH_ATR when the BExFlag of the InfoProvider is not set. Using DSOs for direct update there is no change to change the BExFlag. As a result queries based on a DSO for direct update always throw the above mentioned warning when filter-characteristics are attributes.
    Regards, Clemens

  • How can you trim the contact field value without cloudconnector?

    How can you trim the contact field value without cloudconnector?

    You can add your contacts to segments, while right-clicking on the criteria you have added in segments, you will see the option for Merge, Intersect & Trim.
    See the attached URL, it might help you .
    Merge, Intersect, Trim

  • Create a framework contract of value without items

    Hi everyone,
    I need to create a framework contract of value without items.
    Afterwards, I need to create a purchase order with refrence to this framework contract.
    I am looking for information but I haven't found anything about it.
    Please, could you help me?
    Regards,
    ARGPES

    Hi Aktp/ Abhi;
    Thank you very much for your answer.
    I know, I may use the Item category "M" (for similar materials with same price but different material numbers) and the Item category "W" (for materials belonging to the same material group but with different price)
    I am looking for another possibility (create a framework contract of value without items), because this contract will be created in a noSAP application, afterwards this contract will be copied in SAP by an SAP tool.
    Regards

Maybe you are looking for