Introduction to JavaTV and Its Capabilities

Hello All,
Ive been trying to do some research on JavaTV and its capabilities. I've got an idea where I want to display and onscreen message to the TV for use in medical systems. For example, if a patient is bed ridden and needs to be reminded that its time to take some meds I want to display a message to the screen letting them know its time.
Is it possible to do this with JavaTV and standard cable boxes? Or would I need to roll my own cable box or maybe even use some middleware hardware to make this work?
Thanks in advance for the help.
-KL

Similar Messages

How can I transfer a big .pdf file e.g. 9 MB from my Macintosh Performa 5200 and its OS 8.1 to an USB-flash drive?

How can I transfer a big .pdf file e.g. 9 MB from my Macintosh Performa 5200 and its OS 8.1 to an USB flash drive? E.g. is there any adapter available in order to connect the SCSI with USB? Or is it better to use a compression software and transfer it to 10 3,5" floppy discs?
Thank you
Emanuel

Hello Emanuel,
The Performa 5200CD did not have built-in Ethernet as standard, so unless an Ethernet card (or an external SCSI or LocalTalk-to-Ethernet adapter) has been added, that method would not be available in this case.
Your suggestion involving compression software (such as an appropriate version of StuffIt) with segmenting capabilities could of course be one alternative.
If you have an internal or external modem for the Performa, another way could be to use the telephone lines for transfers. A communications program would have to be used on both sides (for example, ZTerm or the communications section of ClarisWorks on the Performa).
It is even possible to connect two serial modems directly. A simple line simulator (in principle, a 9 V battery in series with a 680 ohm resistor in one of the leads in an RJ-11 to RJ-11 cable), which can be built in a couple of minutes, is sometimes needed. Do NOT use a line simulator for units connected to the public telephone network.
Yet another solution could be a null-modem transfer to a PC with a (DB-9M) serial port. This would require a null-modem cable (can be designed by combining a Macintosh modem cable (MiniDIN-8M to DB-25M) with a normal PC-style (DB-25F to DB-9F) null-modem cable . HyperTerminal or another communications program can be used on the PC.
What do you have to work with (other computers/models/platforms)? Is this a one-time transfer, or do you plan to send additional files later? Is the intention to continue to use the Performa 5200?
Jan

[b]HOW TO:[/b] Copy and Paste THE Filename AND its PATH from Finder

HOW TO DO THIS: Copy and Paste THE selected Filename AND its entire PATH from Finder to another application as in document footer reference, or document database which has a path field to aid in locating the file later.
Finder, Spotlight and File Info (can be used to display Path) or using Command F, command I, etc. but user is not allowed to copy the path to clipboard.
This is rudimentary, yet the word Path, is unknown to Mac Help.
Message was edited by: jbov

AJ,
Isn't it amazing....There is no Command Key for this action? Apple Care was confounded too. And thanx, it'll be a help....
Jim
its tedious, but this should work:
open a terminal window.
Drag and drop the icon for the file in the terminal
window.
This will put the full path including the filename on
the command line.
Copy the path from the command line, and paste
(wherever).
Close the terminal window.

How can i get a comedy, Dutch Treat or/and its companion Detective School Dropouts released in 1987 be included in the iTunes US store for me to down load. i will pay any thing to download them.

I wish to request that a comedy, Dutch Treat or/and its companion Detective School Dropouts released in 1987 be included in the iTunes US store for me to down load. i will pay any thing to download them.

You can try requesting it via this page (these are user-to-user forums) : http://www.apple.com/feedback/itunes.html
But unless the the US rights-holder passes it to Apple and allows them to sell it in the US then Apple won't be able to sell it there

Semantics and its' role in Business Services

Role and importance of semantics in the context of services and SOA:
Semantics refer to interpretation of information and not the literal definition of information/ data. Applying semantics to information turns it into knowledge. Semantics is the act of applying references and drawing conclusions given a set of more scientific informational constructs. Typically semantics are derived using the context in which information is presented. Transposition on the other hand allows applies the rule of inference where in one can draw conclusions on the implication of truth based on some set of facts.
Read more about this at <a href="http://entarch.blogspot.com/2007/10/semantics-and-its-role-in-business.html">Surekha Durvasula's</a> blog.
Surekha is an Enterprise Architecture of a large retail company

Hi shalini,
        Thanks for the reply and can you please say me the menu path for T.code BUSD
And can u please say the difference between 4.0 and 5.0 versions
Regards
Narayana
Message was edited by:
        manam narayana
Message was edited by:
        manam narayana

What is RID in non clustered index and its use

Hi All,
I need help regarding following articles on sql server
1) what is RID in non clustered index and its use.
2) What is Physical and virtual address space. Difference in 32 bit vs 64 bit Virtual address space
Regards
Rahul

Next time Please ask single question in a thread you will get better response.
1. RID is location of heap. When you create Non clustered index on heap and
lookup happens to get extra records RID is used to locate the records. RID is basically Row ID. This is basic definition for you. Please read
this Thread for more details
2. I have not heard of Physical address space. I Know Virtual address space( VAS)
VAS is simple terms is amount of memory( virtual ) 'visible' to a process, a process can be SQL Server process or windows process. It theoretically depends on architecture of Operating System. 32 bit OS will have maximum range of 4 G VAS, it's calculated
like a process ruining on 32 bit system can address max up to 2^32 locations ( which is equivalent to 4 G). Similarly for 64 bit max VAS will be 2^64 which is theoretically infinite. To make things feasible maximum VAS for 64 bit system is kept to 8 TB. Now
VAS acts as layer of abstraction an intermediate .Instead of all request directly mapping to physical memory it first maps to VAS and then mapped to physical memory so that it can manage request for memory in more coordinated fashion than allowing process
to do it ,if not it will soon cause memory crunch.Any process when created on windows will see virtual memory according to its VAS limit.
Please read
This Article for detailed information
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

I lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now..

i lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now.. im wonderin if ist safe coz all my emails are there and all personal info..i hope someone could answer me..i reported to the police the ist step..coz when it happened ..policemen are there..then i went to the nearest MAC center and tried to track it..but its offline..so they asked me if i want to remote lock it..then i did...which i think the mcreason why i cant track my phone beacause its locked?? or not until they connect to wifi or 3g but its unabling them because i locked it..?

but when i do remote wipe ..it will erase everything in there and i cant track down the phone anyomore?

SSO EP 6.0 and ITS

Hello,
I try to establish a single sign on connection from our portal to an its instance.
The portal version is 6.0 SP2 PL31
The ITS is 6.20 PL 17
My problem is that when I call a certain transaction via the ITS URL I always get the logon screen...
When I call a transaction by using the sap transaction starter I am immediately connected without login, but the transaction starter is using the sap gui...
I set the parameter ~mysapcomusesso2cookie 1 in the global.srvc; when I trace my html stream I can see that the SAP Logon Ticket arrives at the ITS, but I always get the logon screen.
I searched the forums for similar problems, but could not find a solution...
thanx for your help
Philipp

For what it's worth, I was about to post the very same problem! The problem also occurs with ITS PL16. We had this functionality working last year with EP6 SP2 P4 HF6 and ITS 620 PL7 - obviously something has changed in the patches from then until now.
I have found that using an IAC iView works OK, but trying to use a URL-based iView does not (both portal and ITS server are in the same DNS domain, all the usual stuff). We have to use a URL-based iView because our IAC will not run in an iFRAME as the portal launcher insists on doing.
- Darren

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

Problems with Syncing iPhone 3G (4.2.1. iOS). What is appearing in the status bar is "Syncing "untiled playlist.." and its stuck at backing up. I noticed that my name has been replaced to "untitled playlist". Whats wrong

Problems with Syncing iPhone 3G (4.2.1. iOS). What is appearing in the status bar is "Syncing "untiled playlist.." and its stuck at backing up. I noticed that my name has been replaced to "untitled playlist". Whats wrong

Welcome to Apple Discussions!
Maybe a long shot, but WD is not known for the quality of some of their enclosures, although I do like the drives themselves. It may be worth mounting this drive in a different enclosure, something like one of OWC's FireWire enclosures with the highly reliable Oxford chip sets. I wouldn't be inclined to trust a WD enclosure, especially if it already seemed to be acting in a flakey manner.
Here's an example of what I mean:
http://eshop.macsales.com/item/Other%20World%20Computing/MEP924FW8E2O/
I have 3 of these and I really like them.
From what I understand, if the drive spins up, it is often possible to recover data from it. To be absolutely certain to destroy the data, you just about have to take a hammer to the disk. Hopefully, there will be a way to get your data back.
Good luck!

TS1292 My iTunes will not work at all I've had 7 different people try it and its still not working

My iTunes will not work at all I've had 7 different people try it and its still not working

Cconnect it to your computer with the latest version of iTunes installed.

Display data to edit based on fields and its value defined in internal tabl

I need to display data in a internal table for editing in a screen.
you have a internal table with field name , data types and its value. I need to display data in a screen ( sceen painter not in a report) row by row in vrtical format.
The internal table's structure not fix. you can have any number of fields in the internal table.
Can you please send me code if it is available with you or send me any senario in SAP if any ...so that i can debug to extract the code..
have to display data vertically as below in editable format,
for example,
Airline
Flight Number
Flight date
Flight price
Airline Currency
Plane Type
Maximum capacity
Occupied econ.
Total
No of fields will change.
also F4 help needs to be attached with each field.
I think it can be done through step loop. can anybody give sample code or tell me where to find in SAP or somewhere else?
it will be great help to me..
Sanjeev

Hi
just check out this program DEMO_DYNPRO_STEP_LOOP.

I tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it doesnt show up on my computer

i tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it doesnt show up on my computer

Hi there starbaeza,
You may find the information in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
-Griff W.

Less than a month and its already broken

Dear BT and Forum users,
I am not very happy with my BB service right now and have come on here in the hope that I might get more that platitudes and fob offs.
So... a few weeks ago my husband finally gave into the sales calls and agreed to have Infinity installed. Our reason - not so much faster internet but in the hope we might get a consistant service.The service we had before that was tempermental at best and we were sick of having to reset the router every other day. (in hindsight we should have just gone with an alternative ISP).
It was installed a couple of weeks ago and worked well until last Wednesday, since then the service has been a comedy of errors. To start with my husband confirmed from the outset that they problem was not coming from inside the house but the customer service operator insisted on booking an engineer.
We agreed to the Friday morning appointment. I booked the morning off work (using annual leave) and the engineer didn't show up. My husband called at 12.30 (they won't take calls from me as I'm not on the bill) and he was assured the appointment was booked in. Shortly after 1 I took a call at the home to say the "system" had lost the booking and the engineer wouldn't be coming.
I said I was in all day, he could come now but that was clearly off script and the call centre operative wouldn't enterntain the idea (annoyingly there were 2 BT vans in my neighbourhood that afternoon). Instead they wanted me to rebook another 4 hour appointment. I couldn't stop in Saturday and wasn't going to lose more leave. I said I would discuss the options with my husband.
What followed that afternoon was a series of coversations with them, some with me at home and some with my husband at work offering the same options and us giving the same response. I don't know if the operatives weren't talking to each other or didn't understand but it was really irritating. In the end they said they would call my husband at 4pm. They called some time after 5 and said the would try the exchange first and call us Monday morning if they needed to access the property.
Saturday 8.30 the engineer called to say they were on their way, we had the time so we waited. He arrived and was in the house all of 15 minutes before confirming the problem was in the exchange (all that time wasted for that!). We got a call Sunday to say they needed a new part at the exchange then today my husband got an undecipherable voicemail and a text saying the service will be fixed in the next 72 hours. He has spoken to them this evening and we're still non-the-wiser as now there's a fault further up the line.
Whilst all this is going on we have tried to find out if they expect us to pay for the Infinity and BT Vision whilst the services are not working. All they will say is they won't look at refunding losses until the issue is fixed. I realise they can't give us a total but it was a pretty straight forward question - am I paying for this non-service. One operator has said I can have £10 to cover the missed appointment (I value my time and annual leave a little higher).
In all honestly the loss of internet and BT vision is frustrating but what has really dissapointed me is the lack of customer service. No one in the call centres seem to have a clue what's going on (we've had so many versions of what's wrong) and are too tied to a script. There's no sense of inconvenience - I'm supposed to be ready and waiting for 4 hours at a time but they will fix it sometime in the next 3 day.
Right now I'm not even sure its worth waiting to get this fixed.
I'd love for someone to come on here and fix this for me but I'd settle for a little peer support/shared experience.
Thanks
L

OK, so I was being a little optimisitic. We're back online (yay!) but now the bill is just more of the same. Apparently we have to wait 48 hours before they will tell us how they are adjusting the bill I understand that they cannot confirm the problem si fixed yet because of some internal policy but they won't even tell us how much they would calculate as of now - a pretty straight forward question.
So with that, we threw in the towel... said if they can't asnwer a simple question we were off. Of course when I told then operator this he said he's put me straight through to his boss and then left me on hold for over 20 minutes before I gave up!
Called back to leaver dept. to be told we have to pay £200 to cancel (funny they could give us that figure pretty easily). I don't know what was said when he signed up but I am going to be investigating this further. We've had the service less than a month and its been broken a week.

I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. Can someone resolve this problem.

I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. But in my purchased item library it indicates that you update iPhoto. I am not sure which account the aps store asking. Can someone resolve this problem.

Contact App Store support. They're the folks who can help with Account issues.
Regards
TD

Introduction to JavaTV and Its Capabilities

Similar Messages

Maybe you are looking for