Invalid column ora-00904
Good Morning,
I know you have seen this all before but I keep getting this error above and can't seem to locate this error in the code. I simplified the code to be able to id it more easily but no luck.
Thanks in advance.
al
declare
cursor c1 is select owner from dba_tables where owner = 'X';
sql_stmt varchar2(4000);
begin
for c1_rec in c1 loop
sql_stmt := 'select table_name, index_name, column_name, column_position
from dba_ind_columns
where table_owner= '||c1_rec.owner;
execute immediate sql_stmt;
end loop;
end;
/
Good Evening Everyone,
After I had left work and was cruising home on my Harley here in the Washington DC area that thought had occurred to me about those quotes also. I believe that is the solution to the problem. The column name is without quotes. I will try this tommorrow and let you know how it turns out. I know there are alot of easier ways to get the data I need from the tables but how is one to learn if you don't take the rough road once in a while? I am just creating a general script to identify all the user tables who have index columns and what position they are. This information is important to me for database tuning purposes. Once I have these indexes they will be readily available for me to use in perfomrance tuning efforts in the sql scripts as hints. Such as FF_S(table_name index_name). It is just a pain to keep running a short script again and again.
Thanks to everyone who responded.
al
Similar Messages
-
OIM11gR2 - ORA-00904 invalid identifier ORA-00904 OIM_SP_RECONBLKUSERAUDIT
env: OIM11gR2 + connector SAP-ER 9.1.2.4.4
During UDF customization I created an attribute named "USR_UDF_SKY2_DATA_SCAD_CONTR", this does not generate any error but the related column was not created into USR table because the attribute name is longer that 30 character (I was not aware of this OIM limitation).
Anyway, because OIM11.1.2 release lost the feature to delete UDF, I created another attribute for the same purpose and ignore the issue.
At least until I try to run a Trusted Source reconciliation (SAP-ER connector) because if the result is the task "Reconciliation Update Received" (that is: user exists and must be updated) I get the the following error and the reconciliation event is not created:
oracle.iam.platform.utils.SuperRuntimeException: oracle.iam.platform.tx.OIMTransactionException: java.sql.SQLSyntaxErrorException: ORA-00904: "USR_UDF_SKY2_DATA_SCAD_CONTR": invalid identifier
ORA-06512: at "COL05_OIM.OIM_SP_RECONBLKUSERAUDIT", line 66
ORA-06512: at "COL05_OIM.OIM_SP_RECONBLKUSERCRUD", line 448
ORA-06512: at "COL05_OIM.OIM_SP_RECONBLKUSRMLSWRAPPER", line 71
... (full log attached) ...
Note: no error if the result is the task "Reconciliation Insert Received" that is user does not exist and must be created.
My thinking is the initial UDF issue leave some table/s dirty but I don't know how fix it; in addition the wrong attribute named "USR_UDF_SKY2_DATA_SCAD_CONTR" is not mapped into the SAP HRMS Trusted User Process Definition object so no reference should be invoked during the reconciliation process...
Edited by: user1175296 on Nov 22, 2012 2:36 AMFollowing the steps for issue solving:
1. export SandBox, unzip SandBox archive, remove all entries of the wrong attribute into all the XML files of the SandBox, zip updated SandBox archive, re-import the SandBox (thanks Nishith Nayan)
2. ALTER TABLE USR DROP COLUMN <wrong attribute name>
E.g. ALTER TABLE USR DROP COLUMN USR_UDF_SKY2_DATA_SCAD_CONTR
3. DELETE FROM SDC WHERE SDC_NAME = '<wrong attribute name>'
E.g. DELETE FROM SDC WHERE SDC_NAME = 'USR_UDF_SKY2_DATA_SCAD_CONTR'
4. DELETE FROM MV_USER_COLS WHERE COLUMN_NAME = '<wrong attribute name>'
E.g. DELETE FROM MV_USER_COLS WHERE COLUMN_NAME = 'USR_UDF_SKY2_DATA_SCAD_CONTR'
Regards,
Gabriele. -
ORA-00904: invalid column name in select query by using abstract datatype
Hi,
I had created abstract datatype as PERSON_TY and ADDRESS_TY ,
after inserting the record . i'm tryng to select the column but i got the error , even i refferd all those thing. they are given that same please look this finde me a result.
SQL> DESC PERSON_TY
Name Null? Type
NAME VARCHAR2(25)
ADDRESS ADDRESS_TY
SQL> DESC ADDRESS_TY
Name Null? Type
STREET VARCHAR2(30)
CITY VARCHAR2(25)
STATE CHAR(2)
COUNTRY VARCHAR2(15)
SQL> SELECT * FROM EMPLOYE
2 ;
EMP_CODE
PERSON(NAME, ADDRESS(STREET, CITY, STATE, COUNTRY))
10
PERSON_TY('VENKAT', ADDRESS_TY('112: BLUE MOUNT', 'CHENNAI', 'TN', 'INDIA'))
20
PERSON_TY('SRINI', ADDRESS_TY('144: GREEN GARDEN', 'THAMBARAM', 'TN', 'INDIA'))
SQL> SELECT PERSON.NAME FROM EMPLOYE
2 ;
SELECT PERSON.NAME FROM EMPLOYE
ERROR at line 1:
ORA-00904: invalid column name
regards
venkiSELECT PERSON.NAME FROM EMPLOYEIf you look in the documentation, you will see that we need to alias the table in order to make this work:
select e.person.name from employees e
/Cheers, APC
Blog : http://radiofreetooting.blogspot.com -
Sometimes ORA-00904: invalid column
Hello,
Some times when i am running a query I get 'ORA-00904: invalid column name'. Next times i run exactly the same query the query runs well for a few times. And in an unpredictable way, exactly the same query fails again.
I am using Oracle 8i 8.1.7
Can someone help me out?The error does not occur in just a single query. There are multiple query's in whitch the error sometimes occurs. We have been looking for similarity's in the query's, but we haven't found one so far. It seems to be the error does occur more often in query's wich are using a databaselink.
The error does also occur in update statements.
This is an example query:
SELECT DISTINCT
zt.rowid,
zt.id,
zt.begindatum_tim,
zt.zorgtraject_id,
zt.SSPC_ZORGTYPE_ID,
stp_lees_dbc(zrgt.ID, zrgt.initieel_sspc_id, zt.ID)AS dbc,
stp_lees_dbc_code(zrgt.ID, zrgt.initieel_sspc_id, zt.ID) AS dbc_code
FROM
bav_epd_zorgtrajecten zrgt
,bav_epd_ztr_zorgtypen zt
WHERE
zrgt.ID = :parzorgtrajectid
AND zrgt.verwijderd_bln = 'N'
AND zrgt.ID = zt.zorgtraject_id -
Default Errors= ORA-00904: invalid column name
Hi,
I nto expert in plsql , whenever i'm trying to run procedure or function mostly i got this same error and even i didn't view the error using
show errors ,
show errors procedure|function name
CREATE OR REPLACE PROCEDURE SEND_MAIL (
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-20000: ORA-00904: invalid column name
ORA-06512: at line 13
plz explain why this error often display
regards
venkiHi,
unless just give me a suitable thread, please... -
ORA-00904: Invalid column name
Hi all,
some of my OWB generated packages keep returning error
ORA-00904: Invalid column.
When I check run of such packages in OWB Audit Viewer:
1. Selected and inserted no of records is OK
2. There is one error reported the one mentioned above. Unfortunately there is nothing more than "Batch insert" and ORA error no and error code in Error Details
The number of columns and their types and all constraints are the same in DB and OWB repository for both tables that take part in such mapping.
Do you have some ideas where is the problem?
Thanks
Petrtry to produce a trace file
-
Help on Merge Statement ,I got 'ORA-00904: invalid column name' Error
Pls help
In Oracle 9i i implement the following qry
MERGE INTO jobs A
USING (select order_no,jOB_SEQ_NO from jobs_dlt) B
ON (A.ORDER_NO = B.ORDER_NO and A.JOB_SEQ_NO =B.JOB_SEQ_NO )
WHEN MATCHED THEN
UPDATE SET
A.ORDER_NO= B.ORDER_NO ,
A.JOB_SEQ_NO= B.JOB_SEQ_NO
WHEN NOT MATCHED THEN
INSERT (
A.JOB_SEQ_NO ,
A.ORDER_NO
VALUES (
B.JOB_SEQ_NO ,
B.ORDER_NO
but i got 'ORA-00904: invalid column name' Error
JOBS table Contain the above Column
how i implement the Merge Statment
Thanks in advance
By
SekarI seem to recall this error being spuriously (well unhelpfully) thrown if you tried to UPDATE a key that you used in the ON clause, but I could be mistaken.
For us to recreate this you would need to supply the exact version and scripts to create the tables in question. -
ORA-00904: invalid column name - trying to sum
Hi all
probably somrthing really stupid and easy that I'm missing but here goes
I am trying to gather data from 3 tables, 1st one is stock master file - all records are unique key
2nd table is barcodes, product key can occur 2 / 3 times - one for each barcode that is assigned to a product.
3rd table is warehouse stock, again key can occur a few times as there is a key for each stock record
I need to pull the data from 1st two tables and sum the total of warehouse stock for each record pulled.
I know I will get 2 or 3 records for each stock item as each record will return with a different barcode. what I'm trying to eliminate is returning the same records again with a separate row for each set of warehouse stock records.
If I run
select rmdept||','||rmstyl||','||rmcolr||','||rmsize||','||rmvatc||','||rmshgp||','||
rmdesc||','||rmacod||','||rmcdes||','||rmzdes||','||rmsupp||','||rmsspr||','||
rmlcos||','||rsbarc||','||rmpord||','||rmmrch||','||rmcomq||','||rdcstk
from (select unique a.rmdept,a.rmstyl,a.rmcolr,a.rmsize,a.rmvatc,a.rmshgp,
a.rmdesc,a.rmacod,a.rmcdes,a.rmzdes,a.rmsupp,a.rmsspr,a.rmlcos,c.rsbarc,a.rmpord,a.rmmrch,
a.rmcomq, b.rdcstk
from stkmas a, stkwar b, stkbar c
where a.rmdept = c.rsdept(+) and a.rmstyl = c.rsstyl(+) and a.rmcolr = c.rscolr(+)
and a.rmsize = c.rssize(+) and a.rmdept = b.rddept(+) and a.rmstyl = b.rdstyl(+)
and a.rmcolr = b.rdcolr(+)
and a.rmsize = b.rdsize(+)
group by rmdept, rmstyl, rmcolr, rmsize, rmvatc, rmshgp,
rmdesc, rmacod, rmcdes, rmzdes, rmsupp, rmsspr, rmlcos, rsbarc, rmpord,
rmmrch, rmcomq, rdcstk)
order by rmdept, rmstyl, rmcolr
I get all the data I want, but duplicate rows for every stock record
53117701612,1,705,ECKO LOGO STEE W,,X*BRT.ROSE,WMN 12,G12,25,6.44,,0,LT,539,1
53117701612,1,705,ECKO LOGO STEE W,,X*BRT.ROSE,WMN 12,G12,25,6.44,,0,LT,539,228
the last column is the stock record
I would like to return just one row showing warehouse stock as 229
If I run
select rmdept||rmstyl||rmcolr||rmsize||','||rmvatc||','||rmshgp||','||
rmdesc||','||rmacod||','||rmcdes||','||rmzdes||','||rmsupp||','||rmsspr||','||
rmlcos||','||rsbarc||','||rmpord||','||rmmrch||','||rmcomq||','||sum(rdcstk)
from (select unique a.rmdept,a.rmstyl,a.rmcolr,a.rmsize,a.rmvatc,a.rmshgp,
a.rmdesc,a.rmacod,a.rmcdes,a.rmzdes,a.rmsupp,a.rmsspr,a.rmlcos,c.rsbarc,a.rmpord,a.rmmrch,a.rmcomq, b.rdcstk
from stkmas a, stkwar b, stkbar c
where a.rmdept = c.rsdept(+) and a.rmstyl = c.rsstyl(+) and a.rmcolr = c.rscolr(+)
and a.rmsize = c.rssize(+) and a.rmdept = b.rddept(+) and a.rmstyl = b.rdstyl(+)
and a.rmcolr = b.rdcolr(+)
and a.rmsize = b.rdsize(+))
group by rmdept, rmstyl, rmcolr, rmsize, rmvatc, rmshgp,
rmdesc, rmacod, rmcdes, rmzdes, rmsupp, rmsspr, rmlcos, rsbarc, rmpord,
rmmrch, rmcomq, rdcstk
order by rmdept, rmstyl, rmcolr
sum on rdcstk in first select statement, I still get two records returned
00101401409,1,001,NKE ULTRACELL M,,B/W/R CL44,SIZE 9,N01,5,15.24,0010140194095,0,FW,-1,-1
00101401409,1,001,NKE ULTRACELL M,,B/W/R CL44,SIZE 9,N01,5,15.24,0010140194095,0,FW,-1,0
If I change sum to 2nd select statement and leave the group by statement outside the brackets
select rmdept||rmstyl||rmcolr||rmsize||','||rmvatc||','||rmshgp||','||
rmdesc||','||rmacod||','||rmcdes||','||rmzdes||','||rmsupp||','||rmsspr||','||
rmlcos||','||rsbarc||','||rmpord||','||rmmrch||','||rmcomq||','||rdcstk
from (select unique a.rmdept,a.rmstyl,a.rmcolr,a.rmsize,a.rmvatc,a.rmshgp,
a.rmdesc,a.rmacod,a.rmcdes,a.rmzdes,a.rmsupp,a.rmsspr,a.rmlcos,c.rsbarc,a.rmpord,a.rmmrch,a.rmcomq, sum(b.rdcstk)
from stkmas a, stkwar b, stkbar c
where a.rmdept = c.rsdept(+) and a.rmstyl = c.rsstyl(+) and a.rmcolr = c.rscolr(+)
and a.rmsize = c.rssize(+) and a.rmdept = b.rddept(+) and a.rmstyl = b.rdstyl(+)
and a.rmcolr = b.rdcolr(+)
and a.rmsize = b.rdsize(+))
group by rmdept, rmstyl, rmcolr, rmsize, rmvatc, rmshgp,
rmdesc, rmacod, rmcdes, rmzdes, rmsupp, rmsspr, rmlcos, rsbarc, rmpord,
rmmrch, rmcomq, rdcstk
order by rmdept, rmstyl, rmcolr
I get
rmmrch, rmcomq, rdcstk
ERROR at line 14:
ORA-00904: invalid column name
If I put the group by inside the brackets
select rmdept||rmstyl||rmcolr||rmsize||','||rmvatc||','||rmshgp||','||
rmdesc||','||rmacod||','||rmcdes||','||rmzdes||','||rmsupp||','||rmsspr||','||
rmlcos||','||rsbarc||','||rmpord||','||rmmrch||','||rmcomq||','||rdcstk
from (select unique a.rmdept,a.rmstyl,a.rmcolr,a.rmsize,a.rmvatc,a.rmshgp,
a.rmdesc,a.rmacod,a.rmcdes,a.rmzdes,a.rmsupp,a.rmsspr,a.rmlcos,c.rsbarc,a.rmpord,a.rmmrch,
a.rmcomq, sum(b.rdcstk)
from stkmas a, stkwar b, stkbar c
where a.rmdept = c.rsdept(+) and a.rmstyl = c.rsstyl(+) and a.rmcolr = c.rscolr(+)
and a.rmsize = c.rssize(+) and a.rmdept = b.rddept(+) and a.rmstyl = b.rdstyl(+)
and a.rmcolr = b.rdcolr(+)
and a.rmsize = b.rdsize(+)
group by rmdept, rmstyl, rmcolr, rmsize, rmvatc, rmshgp,
rmdesc, rmacod, rmcdes, rmzdes, rmsupp, rmsspr, rmlcos, rsbarc, rmpord,
rmmrch, rmcomq, rdcstk)
order by rmdept, rmstyl, rmcolr
I get
rmlcos||','||rsbarc||','||rmpord||','||rmmrch||','||rmcomq||','||rdcstk
ERROR at line 3:
ORA-00904: invalid column name
I get the same even if I change the field names in the group by to a.rmdept etc.
rmlcos||','||rsbarc||','||rmpord||','||rmmrch||','||rmcomq||','||rdcstk
ERROR at line 3:
ORA-00904: invalid column name
any help, hints or tips greatly appreciated. this is an 8.1.7 database
Thanks
JanetThanks dnikiforov
still get the
select a.rmdept||a.rmstyl||a.rmcolr||a.rmsize||','||a.rmvatc||','||a.rmshgp||','||rmdesc||','||rmac
ERROR at line 1:
ORA-00904: invalid column name
I think its a problem with trying to select on the unique, anyway I accidentally posted a couple of threads for this and it has now been resolved by
select a.rmdept||a.rmstyl||a.rmcolr||a.rmsize||','||a.rmvatc||','||a.rmshgp||','||
a.rmdesc||',||a.rmacod||','||a.rmcdes||','||a.rmzdes||','||a.rmsupp||','||a.rmsspr||','||a.rmlcos||','||
c.rsbarc||','||a.rmpord||','||a.rmmrch||','||a.rmcomq||','||sum(b.rdcstk)
from stkmas a, stkwar b, stkbar c
where a.rmdept = c.rsdept(+)
and a.rmstyl = c.rsstyl(+)
and a.rmcolr = c.rscolr(+)
and a.rmsize = c.rssize(+)
and a.rmdept = b.rddept(+)
and a.rmstyl = b.rdstyl(+)
and a.rmcolr = b.rdcolr(+)
and a.rmsize = b.rdsize(+)
group by a.rmdept,a.rmstyl,a.rmcolr,a.rmsize,a.rmvatc,a.rmshgp,
a.rmdesc,a.rmacod,a.rmcdes,a.rmzdes,a.rmsupp,a.rmsspr, a.rmlcos,
c.rsbarc,a.rmpord,a.rmmrch,a.rmcomq
as I dont need to use the unique because the sum does it for me
Thanks again for speedy help -
ORA-00904 - invalid identifier when adding new column to the report query
Hi,
I am trying to add a new field to an existing bespoke report query. When I click on ok, I get the following error
message: "ORA-00904: <field name> : invalid identifier ==> <field_name>
Any ideas what is causing this problem? Version of the report builder is : 6.0.8 and is connected to a 10.2 db.
Any help appreciated.
Many Thanks,
Praveen
Edited by: praveenrn on May 21, 2009 2:38 PMWhat is the field name ? Maybe a reserved word ? Change to "my_new_variable" to check...
Cheers,
Jens Rettig -
Getting ora:00904 invalid indentifier error while running i query
Hi,
I have a remote database and local database both are oracle 10gR2.Now i have written the below mentioned query in my local database and is working fine,but in case remote database it is throughing error ora:00904 invalid indentifier.
I had export the dump from remote db and import it on my local db and i tried the same and it is working fine on local after that also.
As i believe that this error usually come for column name not exist or column name or it's length or for any special character in column name of the table.But as i said it is working fine on local db but not in remote db though i am using the same dump for local and remote.
Though when i am querying the table i can able to fetch data for the any record but when i am using the below mentioned query for the same i am getting the error.As i am doing this to fecth the data for child parent related relationship.
Can any one suggest is there anything related to configaration or something else.
Please do let me know if you do want some more information on the query what i am doing inside of it.
Rgds,
Anit
Edited by: Anit A. on Sep 1, 2008 2:32 AM
Edited by: Anit A. on Sep 1, 2008 2:33 AMWITH t
AS
SELECT decode(t.spnlevel
,3,t.u_quotesdtlid
,2,decode((select count(*)
from u_quotesdtl t2
where t2.u_quotesdtlid = t.u_quotesdtlid
and t2.parentspn = (t2.jobgroupid||':'||t2.jobtype)
),0,(select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '3'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
),t.u_quotesdtlid
,1,decode((select count(*)
from u_quotesdtl t2
where t2.QUOTEID = t.QUOTEID
and t2.parentspn = (t2.jobgroupid||':'||t2.jobtype)
),0,t.u_quotesdtlid,decode((select count(*)
from u_quotesdtl t3
where t3.QUOTEID = t.QUOTEID
and t3.parentspn = (t3.jobgroupid||':'||t3.jobtype)
and t3.u_quotesdtlid in (select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
),0,(select t4.u_quotesdtlid
from u_quotesdtl t4
,(select t1.parentspn
,t1.jobtype
,t1.jobgroupid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
) t5
where t4.spnitemcode = t5.parentspn
and t4.spnlevel = '3'
and t4.jobtype = t5.jobtype
and t4.jobgroupid = t5.jobgroupid
and t4.QUOTEID = t.QUOTEID
(select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
,null,t.u_quotesdtlid) as parentquoteid
,t.u_quotesdtlid as quotesdtlid
,t.spnlevel as spnlevel
FROM u_quotesdtl t
WHERE t.QUOTEID ='som key id'
ORDER BY parentquoteid,t.spnlevel desc
select * from t; -
Error ORA-00904 invalid identifier
There are so many different employee rates colums in the employee table .
e.g)
emp_rate_1 column has all different salaries(10,20,30)
emp_rate_2 column has all different salaries(20,30,40)
If I do pick up one rate , it works fine as below
select
SUM(emp_rate_1) as emp_rate_1
from employee_t
result $60
but i have to summarize all different rate amount using loop. before looping method,
I tried as simple like below
declare
V_emp_rate_1_ID number;
begin
V_emp_rate_1_ID :=1;
select
SUM(emp_rate_||trim(V_emp_rate_1_ID)) as emp_rate_1
from employee_t ;
end;
I have an error message;
PL/SQL: ORA-00904: "emp_rate_": invalid identifier
ORA-06550: line 5, column 1:
PL/SQL: SQL Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:
how can I put dynamic column into Sum() in the query?
or would you give me your advice to solve the solution.Not clear whether you are trying to get two sums (one for each column) or one sum that totals both columns)
select
SUM(emp_rate_1) as emp_rate_1
from employee_t
result $60But you can do all three with one query
select
SUM(emp_rate_1) as emp_rate_1, sum(emp_rate_2) as emp_rate_2, sum (emp_rate_1 + emp_rate_2) as sum_both
from employee_t -
Multi-row sub query returns ORA-00904 :invalid identifier error
I am creating a report from two tables that I am not joining. I want a single line for every row in table1 that meets a date range. Table2 can contain none or many rows for each recored in table1. I want to get up to two fields from table2.
I was using a case statement to check if there was data and then an in-line query or subquery. Once again, the idea is to have a single line on the report for each table1 record.
I get this error with the code below. It seems the nested multi-row subquery can not see the a.cr_mas_cr_no identifier.
ORA-00904: "a"."cr_mas_cr_no": invalid identifier
Any help is greatly appreciated,
Sam
select
a.cr_mas_cr_no "CRNO", a.cr_mas_type "TYPE", a.cr_mas_status "CR Status",
a.cr_mas_date_logged "Logged date", a.CR_REL_REQ_APP_DATE "RTP approved",a.CR_REL_REQ_RTP_DATE "RTP Date",
a.cr_accepted_date "Complete", a.cr_mas_submitted_by "Requester",
select doc_user FROM crrm_cr_documents WHERE doc_cr_number =a.cr_mas_cr_no and rownum = 1 and DOC_TYPE = 'BD' ) "Bus Design",
(select doc_user FROM crrm_cr_documents WHERE doc_cr_number = a.cr_mas_cr_no and rownum = 1 and DOC_TYPE = 'TD' ) "Tech Design",
(select doc_user FROM crrm_cr_documents WHERE doc_cr_number = a.cr_mas_cr_no and rownum = 1 and DOC_TYPE = 'TE' ) "User acceptance test",
case
when (select count(appr_user) from crrm_cr_approvals where appr_cr_no = a.cr_mas_cr_no and appr_type = 'RTP') > 0
then (select appr_user from (select * from crrm_cr_approvals where appr_cr_no = a.cr_mas_cr_no and appr_type = 'RTP') where rownum = 1)
end
"RTP #1",
case
when (select count(appr_user) from crrm_cr_approvals where appr_cr_no = a.cr_mas_cr_no and appr_type = 'RTP') > 1
then (select appr_user from (select * from crrm_cr_approvals where appr_cr_no = a.cr_mas_cr_no and appr_type = 'RTP') where rownum = 2)
end
"RTP #2",
a.CR_REL_REQ_RTP_BY "Released by",
a.CR_ACCEPTED_BY "Post RTP User Acceptance",
a.cr_mas_title "Title", a.cr_mas_id "ID"
from
crrm_crmaster a
where
(a.CR_REL_REQ_RTP_DATE >= :P1109_BEGDATE and (a.CR_REL_REQ_RTP_DATE <= :P1109_ENDDATE) and
(a.cr_mas_status = 'Complete' or (a.cr_mas_status = 'Release Approved'and a.CR_REL_REQ_APP_DATE < :P1109_ENDDATE))
Message was edited by:
slavanawayIceman,
Thanks for the reply I will try your suggestion.
I will try and explain why I think two subqueries (an in-line query with a subquery?) are required. I will use the creation of the column RTP #1 as the example as the RTP #2 column is only different in the rownum selected.
Looking only at the lines that fail, here is my analysis. (If I rem out the two case lines the query runs, I just don't get two columns of data I need.) I will only examine the first case as the second is changed to extract the second approval via the rownum = 2 criteria. The first statement checks there is at least one RTP approval stored for the request and then gets the user who approved the request if the test is true.
case when
(select count(appr_user) from crrm_cr_approvals where appr_cr_no =a.cr_mas_cr_no and appr_type = 'RTP') > 0
then
The above part works fine and the correct count of approvals is returned.
(select appr_user from (select * from crrm_cr_approvals where appr_cr_no=a.cr_mas_cr_no and appr_type = 'RTP') where rownum = 1)
end
"RTP #1",
I moved the parenthesis to the correct location. There can be multiple approvals for a given parent record. Some parent records need one, some need two approvals. If I replace
(select appr_user from (select * from crrm_cr_approvals where appr_cr_no =a.cr_mas_cr_no and appr_type = 'RTP') where rownum = 1)
with
(select appr_user from approvals where appr_cr_no =a.cr_mas_cr_no and appr_type = 'RTP' and rownum = 1)
The correct result is returned because it returns exactly one row as rownum=1 limits the query. When rownum = 2 then the query returns null as the rownum never gets to two as the rownum column is built via the set created by the second subquery.
The subquery builds a set of approvals for a specific "cr_no" and appr_type of "RTP". the outer query then looks at the rownum of the second query
Here is where I got the rownum information from;
http://www.oracle.com/technology/oramag/oracle/06-sep/o56asktom.html
So here is what I think is happening;
1. Main query From and Where are processed. This should provide the "set" for the query
2.The from subqueries for RTP #1 and RTP #2 should be able to access the a.cr_mas_cr_no field and build a set from the approvals table.
3.The RTP #1/2 subquery (inline maybe a better description?) would then get the correct row from the from subquery.
The error "invalid identifier" refers to the a.cr_mas_cr_no field. I assume it means it can not resolve the table alias inside the subquery.
So maybe your grouping would help, I will try.
Sam -
Dynamic SQL Error -ORA-00904: invalid identifier
Hello!
I'm really hoping I can get some fast help on this. In the interest of honesty, this is for a university oracle programming assignment. I've searched everywhere I can for the answer and haven't had any luck.
Anyway, the problem in a nutshell. I have to write a package to write a text file. The formatting information for the file is held in a table, which has columns to define the various characteristics like justification, padding character and field value.
RECORDTYPE FIELDNAME FIELDVALUE FIELDSIZE FIELDORDER PADDINGCHAR JUSTIFICATION DATASOURCE
7 CreditTotal v_credit 10 5 '0' LPAD PROGRAM
7 RecordType '7' 1 1 ' ' RPAD HARDCODE
I can build the whole file except this footer. the FieldValue "v_credit" references a variable that has the calculated total of the credit amounts for the file. There are also "v_debit", and "(v_credit-v_debt)" entries.
My question seems simple... How can I use this VARCHAR2 value from the table, and have it reference the variable within a Dynamic SQL string? If I use the textvalue of the column in the SQL string it gives me the invalid identifier error when it hits the EXECUTE IMMEDIATE statement. There is another row for the header which has "to_char(sysdate,'DDMMYYYY')" in it, and that runs fine. I'm assuming because they are native SQL statements and variables.
I have tried encapsulating the v_credit in "s, and using dynamica bind variables but had the same problem passing the names to the USING clause.
The SQL string created by the procedure is: SELECT LPAD(v_credit,10,'0' ) FROM dual
The full error is:
ORA-00904: "V_CREDIT": invalid identifier
ORA-06512: at "BWOOD.PKG_BRIAN", line 108
ORA-06512: at line 2
Line 108 is the EXECUTE IMMEDIATE statement
I would really appreciate someones help! I'm happy to post the procedure I've written, with the caveat that it's sloppy student work and needs cleaning up of all the experimental commented attempts:)
Edited by: user5426606 on 20-May-2009 03:34 - Added a few more facts.Thank you for the fast replies. I'll post a short chunk of code to demonstrate.
The actual procedure is quite a bit longer, but this should give you the idea.
PROCEDURE build_dbfile (p_settlement_date IN DATE, p_settlement_key IN VARCHAR2, p_type IN VARCHAR2) AS
v_sqlString VARCHAR2(4000) := 'SELECT ';
v_rectype NUMBER := 7;
v_line LONG;
v_debit NUMBER := 0;
v_credit NUMBER := 0;
v_nrRecords NUMBER := 0;
CURSOR c_settlement IS... -- to select records for data rows
-- cursor to select the rows with the file formatting and data info
CURSOR c_header IS SELECT NVL(fieldvalue,fieldname) db_field, <---- selects the data column
fieldsize,
NVL(paddingchar, ''' ''') paddingchar,
NVL(justification,'LPAD') justification,
datasource
FROM FSS_DESKBANK_REF
WHERE recordtype = r_rec_types.recordtype
ORDER BY recordType, fieldorder;
-- SELECT to get the SUM of datarows for v_credit
SELECT SUM(transactionamount)
INTO v_credit...
-- SELECT to get the SUM of datarows for v_debit
SELECT SUM(transactionamount)
INTO v_debit....
FOR r_head IN c_header LOOP
v_sqlString := v_sqlString || r_head.justification|| '('
|| r_head.db_field ||','
|| r_head.fieldsize || ','
|| r_head.paddingchar || ')';
v_sqlString := v_sqlString || ' FROM ' || v_tbl_name;
DBMS_OUTPUT.PUT_LINE('SQL --> '||v_sqlString);
EXECUTE IMMEDIATE v_sqlString INTO v_line;
END LOOP;
DBMS_OUTPUT.PUT_LINE(v_line);
END build_dbfile;So the loop goes through the table rows, grabs each data value and formatting column, and builds the sql string, which is then passed to the execute statement. The issue is the ones where the datarow contains a reference to v_credit, and the error is generated. ie r_head.db_field contains the string "v_credit"
Satish, the sql does look like that in the string, but the string is built from the table, not hardcoded. ie v_sqlString = "SELECT LPAD(v_credit,10,'0' ) FROM dual" when it is passed to the EXECUTE IMMEDIATE.
Edited by: user5426606 on 20-May-2009 05:19 -
Hi
I am trying insert rows in Oracle database using JDBC receiver adapter setup in PI 7.1. However this receiver adapter is throwing following exception.
Delivering the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'PRADEEP_OTC_ORDERS' (structure 'statement'): java.sql.SQLException: ORA-00904: "BATCH_ID": invalid identifier .
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:mt_sql_writer xmlns:ns0="http://rdbms_poc">
<statement>
<dbtablename action="INSERT">
<table>PRADEEP_OTC_ORDERS</table>
<access>
<order_id>19126</order_id>
<version>1</version>
<batch_id>132</batch_id>
</access>
</dbtablename>
</statement>
</ns0:mt_sql_writer>
PRADEEP_OTC_ORDERS table has just 3 columns as specified the access segment. However I stil get this ORA-00904 error message.
Any idea on what could be wrong.?
Thanks
-PradeepHi All,
Thanks a lot for responding...
I verified the table structure, table just contains those 3 coulms all varchar type.
I modified the column name as well, But was still getting ORA-00904. Then I went directly to the the database and executed below insert statement,
insert into PRADEEP_OTC_ORDERS (mps_order_id, mps_version,mps_batch_id) Values(1,2,3)
I got exact SQL Error: ORA-00904: "MPS_BATCH_ID": invalid identifier.
So ISAP JDBC adapter is not enclosing the string values in quotes.
SAP documentation says it puts quotes for values and treats everything as string(text).
Anybody has any idea, why JDBC receiver adapter not enclosing the values in quotes?
Thanks
-Pradeep -
Hi everyone,
has anyone else had this error which has been driving me round the bend during the last three days?
I have an interactive report which used to work fine.
Now it happens (when the page loads/a filter is en- or disabled) that - from time to time, but unpredictable - I receive
ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
The report is based on a table function.
I will try to set up a testcase and post the link here, but so far I haven't managed to force the error to occur.
But maybe someone else has already bumped into this kind of error? I would be grateful for any hints!
Best regards,
Sabine
Application Express 4.1.0.00.32
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit ProductionHi Jari,
I changed the type definition (the return type of the table function) and extended the select list in the source of the IR.
I do not use 'select *' but reference every column explicitly. So APEX easked me whether to add the new column.
I also tried deleting in recreating the region, but no luck.
Any more ideas?
Best regards,
Sabine
Maybe you are looking for
-
I am trying to sync my iphone 4 to my computer ( Windows 7 64 bit ) so I can update my apps. when I connect my phone to the computer, a window pos up with the following . . . . . . . . . this iphone 'colin's iphone' could not be synced because this c
-
Hi, I'm migrating a Planning application between servers, and I know LCM has it's own will to change the forms folder option. What is the the recommended way to keep the order and migrate as fast as possible? Probably the best way is to create manual
-
Form field tool tips & Read Out Loud
I know that having tool tips for form fields in a PDF is a requirement for accessibility. When I use View > Read This Page in Acrobat, the reader does not read the tool tips for the form fields, even though I've turned on Read form fields in Preferen
-
I'm trying to download a pdf but I keep getting the error message "To view the full contents of this document you need a later version of the PDF viewer" however, I already have the latest version installed (11.0.04). How can I download this pdf? t
-
Premiere Pro CS3 export to FLV Youtube settings
I want to export from Premiere to FLV for Youtube. My understanding is that this is the best way to get high quality outcomes for Youtube. I have used Premiere a little but need help with the settings eg. Which preset do I use when starting a new fil