Invalid data form - v11.1.2

Message reads, "The data form Budget Formulation Worksheet is invalid. Check log for details."
I've looked at a few threads that address this itopic, but none of the responses fix our issue. We're running v11.1.2.0. New app. No data loaded, yet. No user variables. Essbase has been refreshed. New data form. I've reduced every dimension to a single member (i.e., no iDescendants). Accounts in the rows, Periods in the columns, Year, Scenario, Version, Entity in the Page and a couple lof dims in POV.
We're in a tightly contolled environment with no access to the log files. Will have the IT boy fetch us the log files, but need to give him specific files names and locations. I found the path below:
UNIX: Oracle WebLogic Server:
MIDDLEWARE_HOME/user_projects/epmsystem1/diagnostics/logs/starter
Do we still request the HyS9Planning-syserr.log and HyS9Planning-sysout.log or are they only applicable to Windows?
Any suggestions will be greatly appreciated.
Edited by: user13525136 on Mar 22, 2011 11:37 AM

Hi John,
Thanks for the post. The data form started working this afternoon. I reworked the form to leaf level for every dimension just to start fresh, even though I'm 99% sure I did this yesterday. Then worked my way up the dimensions, one by one, until I was at the top of the house.
Works like a champ. Why is it working today? I found out a coworker was loading data into the app. Up to this point the cube was empty. That must have been the key.
Regards,
Dave

Similar Messages

5200: Error executing query: The data form grid is invalid.

Hi,
I am getting this error " 5200: Error executing query: The data form grid is invalid. Verify that all members selected are in Essbase. Check log for details.
com.hyperion.planning.HspException;hasPovDims=1;povXML=<?xml version="1.0"?><datasources><datasource name="Profit " dsid="228af2c3_129ca3dd85c_-77b1" allowEdit="1"><dim name="Period" dimIndex="1" dsName="Profit " keyDimName="Period" memberName="Apr" displayName="Period: Apr"/><dim name="Year" dimIndex="2" dsName="Profit " keyDimName="Year" memberName="FY10" displayName="Year: FY10"/><dim name="Entity" dimIndex="5" dsName="Profit " keyDimName="Entity" memberName="9999" displayName="Entity: 9999"/></datasource></datasources>"
I have checked that both the systems essbase and planning are same. nothing's different. still i cannot find the exact reason why the report is not working.
can any please help me.
btw, i am using Hyperion Planning 9.3.1
Thanks,
BIMS

Hi
You probably deleted some members from outline that are used by report
I would recommend you to open you report/grid via rep.client and try to find which elements are abcent
Regards
Alexander
Edited by: Softperson on 19/8/2010 17:38

The data form form name is invalid. Check log for details

Hi all,
i have just built a planning application from scratch and created my first form.
i have encountered the error "The data form <form name> is invalid. Check log for details "
and i have checked the log file.
It reads as follows
Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled.
An error [1012703] occurred in Spreadsheet Extractor.
Spreadsheet Extractor Elapsed Time : [0] seconds
Spreadsheet Extractor Big Block Allocs -- Dyn.Calc.Cache : [0] non-Dyn.Calc.Cache : [0]
Transaction [ 0x60001( 0x4d8030e5.0xa0280 ) ] aborted due to status [1012703].
User [admin] set active on database [Plan1]
Can any one suggest me how to handle this.
Thanks in advance

user9192499 wrote:
Hi all,
i have just built a planning application from scratch and created my first form.
i have encountered the error "The data form <form name> is invalid. Check log for details "
and i have checked the log file.
It reads as follows
Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled.
An error [1012703] occurred in Spreadsheet Extractor.
Spreadsheet Extractor Elapsed Time : [0] seconds
Spreadsheet Extractor Big Block Allocs -- Dyn.Calc.Cache : [0] non-Dyn.Calc.Cache : [0]
Transaction [ 0x60001( 0x4d8030e5.0xa0280 ) ] aborted due to status [1012703].
User [admin] set active on database [Plan1]
Can any one suggest me how to handle this.
Thanks in advance
ERROR 1012703
*"Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled."*
There is an error in a formula(s), therefore, no calculations will work. The problem is that when you have the outline open in Edit mode and you try to 'Validate', it does not identify any of these errors, nor does it write it to a log. However, you can go one by one and validate each formula. So any time you delete a member or modify a member name, be sure that this member is not included in any formula.
Regards,
Prabhas

The data form is invalid. Please Check log for details.

Hi.
Recently i have migrated an application from scratch onto same datasource where application earlier was hosting on. i have deleted the application and making use of same datasource i have created the application again and migrated the artefacts and imported,refreshed and loaded the data into essbase db, once after the migration am not able to open some data forms and after the essbase restart i am able to some and others are still giving the same error message as earlier "The data form is invalid Please check log for details.".
Could anyone help on this. have gone through different otn answers but unable to reach at point.
Thanks
Amith

Try Oracle Support:
Error "1012703 Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled" During Calculation (Doc ID 744529.1)
or
Error: "Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled." (Doc ID 593227.1)
Cheers
John
http://john-goodwin.blogspot.com/

The data Form is invalid. Check log for details.

Hi All,
I am getting the following error, when I try to open a form.
The data form 1. Current Year Forecast Input Form is invalid. Check log for details.
Could you please let us know the path of the log file.
Thanks & Regards,
Sravan Kumar.

Hi,
If you want to know what patch release you are you, then log into planning directly and click help > about
The latest patch is :- 7229787 — You cannot open a Planning data form in Smart View, if in Planning preferences, the property for Indentation of Members on Page Display is set to Indent based on hierarchy.
I believe John was referring to this bug which was resolved in patch 9.3.1.1.6 :-
7229787 — You cannot open a Planning data form in Smart View, if in Planning preferences, the property for Indentation of Members on Page Display is set to Indent based on hierarchy.
Cheers
John
http://john-goodwin.blogspot.com/

Using hidden dimensions on data form (Planning V11)

Hi,
I’m using EPM – Planning 11.1.1.2.0.
I’m building a data form. I’d like to use 5 dimensions in columns of my table. And I’d like to set hidden 2 of 5 these dimensions.
My trouble that Planning can show me this data form if hidden ONE dimension has been set LAST in order. In other variants I had an error (browser IE was crashed). If I set TWO hidden dimensions (has been set LAST in order) Planning shows me data form but when I try to enter data my browser was crashed again.
How can I build my form to use it (hidden dimensions in table columns) successfully? I can't found any limits to use hidden option for dimensions in columns in admin guides for EPM 11.
Have you such trouble too?

NoFog, Hi!
11.1.1.3 is now available on e-delivery!
I want ask you another question. Did you solve V11: Essbase Exception: ESSG_ERR_OPERATIONFAILED (1100027) problem?

HFM Data Form in Smart View - Improper Suppression

We have several data forms that are opened by a group of controllers every month to load forecast information to HFM. This data form is opened by all of these users in Excel and submitted back to HFM via Smart View.
We have instructed all of the users to turn off ALL suppression while working with the data forms because there are some invalid intersections for ICP based on the input entity. The form is rendering properly for all users but one. When he opens the data form it appears to show all of the lines, but then once it fully loads, it is removing/suppressing one line that is an invalid intersection. In checking his Smart View options, I can clearly say that he does not have ANY of the suppression options in use.
Has anyone experienced this issue? Are there any workarounds? Why would this only happen for one user when 10 others have no issue when using the same file/form/options?
Your help is appreciated, as always!
Scott

Hi Scott,
If this is only for one user, I doubt something wrong in his profile.
Ask your IT to have his profile recreated to see if the issue disappears.
Hope this helps,
Thank you,
Charles Babu J

How to add a mm-dd-yyyy date field type in a Planning Data Form

Hi John,
pls, I have one question regarding the possibility of adding a date field type for example 03-03-2009 in a cell of Planning Data Form application.
for example, I created:
- 2 members in Period dimension: StartProject and EndProject and I need to enter and track date for these fields;
- one Account member called Project;
- and a simple form with these collumns and row;
Trying different settings for my members - seems that I cannot input date in the cell and rcvd errror: "you have entered invalid value".
Pls, can you confirm me if it's possible to enter date type in a form?
If yes, what is the specific setup for the Account and Period properties: Data storage, Time Balance, Data type, Account type etc
many thanks,
Robert

Many thanks John!!! that's it!!!
I had to change it in Data Type evaluation Order because I'm using EPMA and it's working now!!
Thanks again!!!
Rgds,
Robert

Unable to email a document. Keep getting error message: Invalid Date Enter 2-digit month

Unable to email a document. Keep getting error message: Invalid Date Enter 2-digit month
Does not happen with all forms which emante from same USG webpage
Any adivice?

If i am using 11G andrtp is 11g but on rtp side if they configure SSL, is it mandatory to do it from our side also?No it not mandatory to enable SSL at your end however you have to configure identity and trsut at your end.
Any update on my regular question(The main forum question)?You mentioned that you are posting message from 10g to 11g and as per log you are sending it to URL - https://dev-nog.server:443/b2b/transportServlet
So few things which I see as a problem are-
1. You should use URL https://hostname:soa_server_ssl_port/b2b/httpReceiver instead of https://dev-nog.server:443/b2b/transportServlet
2. SOA server SSL port should be enabled (SSL should be enabled on SOA server)
3. You should configure wallet at 10g side to contain trust cert of 11g server
Regards,
Anuj

Data Forms in Smart View - Add Members

We have data forms with Add Member functionality. When opening that data form using Smart View it puts red border around top member but then instead of allowing user to select a member it lists all of them in the rows. A good example is ICP data form where user can select partner to report balance. The data form online allows selection of individual partners but when same data form opened in Smart View it lists all 1,000+ ICP True entities.
Is syntax different when data form to be used with Smart View?
We have V11.1.1.3.

You have to suppress no data/zeros in SmartView and refresh the form to see the rows collapsed. I had created an enhancement request for this and it is currently under review by development. I would suggest you do the same if you'd like to see this fixed.
The bug is listed as 13878488 - SUPPRESS ROWS IS NOT ENABLED WHEN OPENING FORM IN SMARTVIEW

Dynamic period columns in data forms?

Hi,
We are running HFM v11.1.1.3
I have some input data forms that shows some different periods and scenarios, however the periods sometimes needs to be changed, so I was wondering if anyone knows a way in doing this dynamic?
For January we would like it to be:
C1=S#Actual.Y#CUR.P#CUR
C2=S#Actual.Y#CUR.P#CUR-1
C3=S#FYE.Y#CUR.P#CUR
and in March it should be:
C1=S#Actual.Y#CUR.P#CUR
C2=S#Actual.Y#CUR.P#CUR-1
C3=S#FYE.Y#CUR.P#CUR
C4=S#FYE.Y#CUR.P#CUR-2
in June and September it should be
C1=S#Actual.Y#CUR.P#CUR
C2=S#Actual.Y#CUR.P#CUR-1
C3=S#FYE.Y#CUR.P#CUR
C4=S#FYE.Y#CUR.P#CUR-3
so basically this would require 3 different forms, and with linked forms as well it will be many forms. So if there could be build in some kind of if statement?
Thank you in advance
Best regards
Kenneth

Hi Kenneth,
Nobody is answering you because there is no way to do that with Data Forms.
If you are skilled with Excel, and if you understand the implications of going that path, you can create dynamic Excel grids that send data to HFM using HFM functions.
Depending on your needs and your budget, you can also create a custom web application that would replace data forms.
If you want to stick with data forms, then you will need to create 3 forms (+the linked forms you mentioned).
Not sure that helped...
Julien

Error during the save process with Planning data form

Hi,
When in Planning web-client, I am trying to make changes to data on a data form. The cells are level-0 members (Yellow and writeable in a bottom-up Working version). When I save, it takes a while to process the request, then gives me the following error message: "There was an error during the save process."
The data form is fairly large, could this be causing the problem? I am a able to save data on other forms that correspond to the exact same set of members and dimensions with no problem. What are possible causes of this error? I have tried stopping and starting planning and the entire EPM system. Thank you.

Hi,
I believe you are using V11, I would stop planning, clear out log \Hyperion\logs\services\HyS9Planning-sysout.log, start planning, replicate the error and then going in look if the log has any more detailed information.
Cheers
John
http://john-goodwin.blogspot.com/

Error when trying to open Data form in HFM

Hi,
I tried to change period in POV-selections from April to May but did not succeed. And after that when I try to open this Data form
I get this error message:
Error executing VBScript Hyperion.HFMErrorHandler.1, Line 129:<?xml version="1.0"?> <EStr><Ref>{3086414B-A5B2-4627-8FCA-7FDA700BEE3D}</Ref><AppName>LUVATA</AppName><User/><DBUpdate>1</DBUpdate><ESec><Num>-2147211264</Num><Type>1</Type><DTime>5/10/2010 9:30:31 AM</DTime><Svr>HFMAS003</Svr><File>CHsvDSMemberListScript.cpp</File><Line>1175</Line><Ver>11.1.1.3.22.2724</Ver></ESec></EStr>.
Invalid POV member specified: %0
Show Details:
Error Reference Number: {699C5226-DB4A-4B30-BABF-581EF156ADDD};User Name: admin@Native Directory
Num: 0x80042fc2;Type: 1;DTime: 5/10/2010 9:30:31 AM;Svr: HFMAS003;File: CHsvScriptEngine.cpp;Line: 392;Ver: 11.1.1.3.0.2413;
Num: 0x80042fc2;Type: 0;DTime: 5/10/2010 9:30:31 AM;Svr: HFMAS003;File: CHsvDSMemberLists.cpp;Line: 2592;Ver: 11.1.1.3.0.2413;
Num: 0x80042fc2;Type: 0;DTime: 5/10/2010 9:30:31 AM;Svr: HFMAS003;File: CommonMetadataInternal.cpp;Line: 473;Ver: 11.1.1.3.0.2413;
Num: 0x80042fc2;Type: 0;DTime: 5/10/2010 9:30:31 AM;Svr: HFMAS003;File: CommonMetadata.cpp;Line: 2973;Ver: 11.1.1.3.0.2413;
Num: 0x80040d53;Type: 1;DTime: 5/10/2010 9:30:31 AM;Svr: HFMAS003;File: CHsvWebFormGeneratorACM.cpp;Line: 2627;Ver: 11.1.1.3.15.2720;
Num: 0x80040d53;Type: 0;DTime: 5/10/2010 9:30:31 AM;Svr: HFMAS003;File: CHsvWebFormGeneratorACM.cpp;Line: 2433;Ver: 11.1.1.3.15.2720;
Num: 0x80040d53;Type: 0;DTime: 5/10/2010 9:30:31 AM;Svr: HFMWS002;File: CHsvWebFormsACV.cpp;Line: 569;Ver: 11.1.1.3.0.2413;
Any ideas what might be wrong?
All I tried to do is just to edit period in POV-selections -tab.

I figured a way around this in case anyone has the same problem in the future. I just opened Acrobat Pro X, clicked combine files into PDF, selected the file I wanted, saved the "binder" as PDF then saved another version as Reader Extended PDF. I think this helped because it essentially creaded a whole new PDF with the old PDF in it and getting rid of whater hashes or document properties in the last one that wouldn't allow it to work in Reader. Opens perfectly on other computers.

Invalid date format after APEX upgrade

We are currently working on upgrading our applications from 1.6 to the new APEX 3.2 version. After the upgrade of one of our systems I have a tabular form that is returning the error 'Invalid date format found'. The date that is getting entered into the system is being displayed and choosed via a sql popup. The code for the pop up is
SQL CODE
create or replace view next_weeks as
with t as (
select
trunc(sysdate) + (rownum - 1) / 2 d
from
dual
connect
by rownum <= 28)
, call_info as (
select
c.call_identifier, c.callback_date, c.callback_cancelled
from uid_csr_schedule c
select
to_char(d, 'fmDy MM/DD/YYYY AM') l
, to_char(d, 'dd-mon-yy hh:mi:ss AM') v
,to_char(d, 'mm/dd/yy hh:mi:ss AM') o
from
t
where
((select count(callback_date) from call_info ci where ci.callback_date = t.d
and (ci.callback_cancelled is null or ci.callback_cancelled !='Y'))) <
(select csr_calls_per_period from uid_sch_system_default)
minus
select
to_char(d, 'fmDy MM/DD/YYYY AM') l
, to_char(d, 'dd-mon-yy hh:mi:ss AM') v
,to_char(d, 'mm/dd/yy hh:mi:ss AM') o
from
t
where
(select count(callback_date) from call_info ci where ci.callback_date = t.d
and (ci.callback_cancelled is null or (ci.callback_cancelled !='Y')))
=(select override_amt from uid_sch_call_override
where (to_char(begin_date,'dd-mon-yy') || ' ' || upper(period)) = to_char(t.d, 'dd-mon-yy AM'))
union select
to_char(d, 'fmDy MM/DD/YYYY AM') l
, to_char(d, 'dd-mon-yy hh:mi:ss AM') v
,to_char(d, 'mm/dd/yy hh:mi:ss AM') o
from
t
where
((select count(callback_date) from call_info ci where ci.callback_date = t.d
and (ci.callback_cancelled is null or ci.callback_cancelled !='Y'))) >=
(select csr_calls_per_period from uid_sch_system_default)
and
(select count(callback_date) from call_info ci where ci.callback_date = t.d
and (ci.callback_cancelled is null or (ci.callback_cancelled !='Y')))
<
(select override_amt from uid_sch_call_override
where (to_char(begin_date,'dd-mon-yy') || ' ' || upper(period)) = to_char(t.d, 'dd-mon-yy AM'))
order by o
The form then has the item set as a popup with a date format mask of dd-MON-yy hh:mi:ss AM. The popup displays fine and the date is shown in the field but the error is received when I try to save the information. If I change the application global setting of date format mask to dd-MON-yy hh:mi:ss AM then this error goes away however, it creates problems on all the rest of my pages that use this date in the where clause of the queries. Is there a way to solve the problem above without having to change the globalization parameter or do I need to change this parameter and then redo those queries?
Thanks for your help!
Amber

Amber,
It's interesting that the problem goes away if you set the global date format to be the same as the column level. The column level should trump the global setting. What process is returning the error? Are you sure it's the MRU or could it be something custom?
You could consider adding a process before the MRU fires that uses alter session to change the date format.
Regards,
Dan
Blog: http://DanielMcGhan.us/
Work: http://SkillBuilders.com/

How to avoid invalid data entering in LOV through code

hi
1)i have developed lov in table region, but user easily can enter invalid data and saved into the database tables.
2)i created one formvalue and mapping into that return item , still its not working in table region LOV.
3)how to avoid invalid data entering in LOV through code. i have tried this below code in EOimpl set value method. but some how its not wokring.
if (value!=null)
throw new OAAttrValException(OAAttrValException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(),
getPrimaryKey(),
"ProcurementCategory",
getProcurementCategory(),
"FND",
"FND_LOV_SELECT_VALUE");
Thanks.
krish.

Thanks reetesh and gourav for your help.
i followed below mapping details
LOV Item Properties
ID -PurcCommodity
ViewInstance -VendorVO1
ViewObject -PurcCommodity
map1 properties
LOV Region Item - segment1
Return Item -PurcCommodity
CriteriaItem -PurcCommodity
Usefor Validation -Default
map2 properties
LOV Region Item - segment1
Return Item -validation(formvalue)
CriteriaItem -
Usefor Validation -yes
form value properties
ID -validation
ViewInstance -VendorVO1
ViewObject -PurcCommodity
Gourav- i double checked multiple rows it is not working, some times it is not working for single row too.
Thanks
krish.

Invalid data form - v11.1.2

Similar Messages

Maybe you are looking for