Invalid folders: Repository Managers in KM Configuration Post Patch 34

Our Internal Test Portal is clustered across 2 physical servers. Patch34 was installed on the primary node
successfully. The Seconday Node was then started so that it would sync up with the Primary and get the patch installed. Everything seemed to work ok on the sync. However when you click on KMContent in the seconday node portal you get a message that says "Item not found
The item you are attempting to access is not available. Check that the
name or link is correct. You might also check whether the associated
repository is currently accessible. "
When trying to investigate what was causing this problem we discovered
the following error in the Knowledge Management Configuration.
When you click on System Admin - System Config - Knowledgement Mgmt -
Configuration - Content Managemnet you get an error at the top of the
screen that reads Invalid folders: Repository Managers
When you click on Repository Managers you get the following error at
the top of the screen. Invalid classes: User Management Repository,
Taxonomy Repository, Content Exchange Repository, Virtual Root
Repository, User Management Engine (UME 4.0) Repository Manager,
Calendar Repository, Reporting Repository, File System Repository
Any ideas?
Thanks,
Keith

Keith,
Check the config_local.properties file under the KM application folder
...\irj\root\web-inf\portal\portalapps\com.sap.km.application\lib
if it is going to a share like
server\sapprt\j2ee...
then it may not work for you, so in order to resolve just map the network drive on cluster to primary node C drive
in to Z or Y drive.
and place the directory as
Z:\usr\sap\ep6q\global\config\cm
then restart the cluster.
Try and let me know it worked or not.
Ravi

Similar Messages

Enterprise portal - Invalid areas:Repository Managers

Hi All,
I'm facing the warning as "Invalid areas:Repository Managers" under Knowledge Management, we have done EHP upgrade recenlty. Could you guide how to resolve the issue & here I'm attaching the warning screen-shots please have a look.
Regards,
Venkatesh

Keith,
Check the config_local.properties file under the KM application folder
...\irj\root\web-inf\portal\portalapps\com.sap.km.application\lib
if it is going to a share like
server\sapprt\j2ee...
then it may not work for you, so in order to resolve just map the network drive on cluster to primary node C drive
in to Z or Y drive.
and place the directory as
Z:\usr\sap\ep6q\global\config\cm
then restart the cluster.
Try and let me know it worked or not.
Ravi

REST API: Create Deployment throwing error BadRequest (The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.)

Hi All,
We are trying to access the Create Deployment method stated below
http://msdn.microsoft.com/en-us/library/windowsazure/ee460813
We have uploaded the Package in the blob and browsing the configuration file. We have checked trying to upload manually the package and config file in Azure portal and its working
fine.
Below is the code we have written for creating deployment where "AzureEcoystemCloudService" is our cloud service name where we want to deploy our package. I have also highlighted the XML creation
part.
byte[] bytes =
new byte[fupldConfig.PostedFile.ContentLength + 1];
 fupldConfig.PostedFile.InputStream.Read(bytes, 0, bytes.Length);
string a = Encoding.UTF8.GetString(bytes, 0, bytes.Length);
string base64ConfigurationFile = a.ToBase64();
X509Certificate2 certificate =
CertificateUtility.GetStoreCertificate(ConfigurationManager.AppSettings["thumbprint"].ToString());
HostedService.CreateNewDeployment(certificate,
ConfigurationManager.AppSettings["SubscriptionId"].ToString(),
"2012-03-01", "AzureEcoystemCloudService", Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot.staging,
"AzureEcoystemDeployment",
"http://shubhendustorage.blob.core.windows.net/shubhendustorage/Infosys.AzureEcoystem.Web.cspkg",
"AzureEcoystemDeployment", base64ConfigurationFile,
true, false);
<summary>
/// </summary>
/// <param name="certificate"></param>
/// <param name="subscriptionId"></param>
/// <param name="version"></param>
/// <param name="serviceName"></param>
/// <param name="deploymentSlot"></param>
/// <param name="name"></param>
/// <param name="packageUrl"></param>
/// <param name="label"></param>
/// <param name="base64Configuration"></param>
/// <param name="startDeployment"></param>
/// <param name="treatWarningsAsError"></param>
public static
void CreateNewDeployment(X509Certificate2 certificate,
string subscriptionId,
string version, string serviceName, Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot deploymentSlot,
string name, string packageUrl,
string label, string base64Configuration,
bool startDeployment, bool treatWarningsAsError)
Uri uri = new
Uri(String.Format(Constants.CreateDeploymentUrlTemplate, subscriptionId, serviceName, deploymentSlot.ToString()));
XNamespace wa = Constants.xmlNamespace;
XDocument requestBody =
new XDocument();
String base64ConfigurationFile = base64Configuration;
String base64Label = label.ToBase64();
XElement xName = new
XElement(wa + "Name", name);
XElement xPackageUrl =
new XElement(wa +
"PackageUrl", packageUrl);
XElement xLabel = new
XElement(wa + "Label", base64Label);
XElement xConfiguration =
new XElement(wa +
"Configuration", base64ConfigurationFile);
XElement xStartDeployment =
new XElement(wa +
"StartDeployment", startDeployment.ToString().ToLower());
XElement xTreatWarningsAsError =
new XElement(wa +
"TreatWarningsAsError", treatWarningsAsError.ToString().ToLower());
XElement createDeployment =
new XElement(wa +
"CreateDeployment");
 createDeployment.Add(xName);
 createDeployment.Add(xPackageUrl);
 createDeployment.Add(xLabel);
 createDeployment.Add(xConfiguration);
 createDeployment.Add(xStartDeployment);
 createDeployment.Add(xTreatWarningsAsError);
 requestBody.Add(createDeployment);
 requestBody.Declaration =
new XDeclaration("1.0",
"UTF-8", "no");
XDocument responseBody;
RestApiUtility.InvokeRequest(
 uri, Infosys.AzureEcosystem.Entities.Enums.RequestMethod.POST.ToString(),
HttpStatusCode.Accepted, requestBody, certificate, version,
out responseBody);
<summary>
/// A helper function to invoke a Service Management REST API operation.
/// Throws an ApplicationException on unexpected status code results.
/// </summary>
/// <param name="uri">The URI of the operation to invoke using a web request.</param>
/// <param name="method">The method of the web request, GET, PUT, POST, or DELETE.</param>
/// <param name="expectedCode">The expected status code.</param>
/// <param name="requestBody">The XML body to send with the web request. Use null to send no request body.</param>
/// <param name="responseBody">The XML body returned by the request, if any.</param>
/// <returns>The requestId returned by the operation.</returns>
public static
string InvokeRequest(
Uri uri,
string method,
HttpStatusCode expectedCode,
XDocument requestBody,
X509Certificate2 certificate,
string version,
out XDocument responseBody)
 responseBody =
null;
string requestId = String.Empty;
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(uri);
 request.Method = method;
 request.Headers.Add("x-ms-Version", version);
 request.ClientCertificates.Add(certificate);
 request.ContentType =
"application/xml";
if (requestBody != null)
using (Stream requestStream = request.GetRequestStream())
using (StreamWriter streamWriter =
new StreamWriter(
 requestStream, System.Text.UTF8Encoding.UTF8))
 requestBody.Save(streamWriter,
SaveOptions.DisableFormatting);
HttpWebResponse response;
HttpStatusCode statusCode =
HttpStatusCode.Unused;
try
response = (HttpWebResponse)request.GetResponse();
catch (WebException ex)
// GetResponse throws a WebException for 4XX and 5XX status codes
 response = (HttpWebResponse)ex.Response;
try
 statusCode = response.StatusCode;
if (response.ContentLength > 0)
using (XmlReader reader =
XmlReader.Create(response.GetResponseStream()))
 responseBody =
XDocument.Load(reader);
if (response.Headers !=
null)
 requestId = response.Headers["x-ms-request-id"];
finally
 response.Close();
if (!statusCode.Equals(expectedCode))
throw new
ApplicationException(string.Format(
"Call to {0} returned an error:{1}Status Code: {2} ({3}):{1}{4}",
 uri.ToString(),
Environment.NewLine,
 (int)statusCode,
 statusCode,
 responseBody.ToString(SaveOptions.OmitDuplicateNamespaces)));
return requestId;
But every time we are getting the below error from the line
response = (HttpWebResponse)request.GetResponse();
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>BadRequest</Code>
<Message>The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message>
</Error>
Any help is appreciated.
Thanks,
Shubhendu

Please find the request XML I have found it in debug mode
<CreateDeployment xmlns="http://schemas.microsoft.com/windowsazure">
<Name>742d0a5e-2a5d-4bd0-b4ac-dc9fa0d69610</Name>
<PackageUrl>http://shubhendustorage.blob.core.windows.net/shubhendustorage/WindowsAzure1.cspkg</PackageUrl>
<Label>QXp1cmVFY295c3RlbURlcGxveW1lbnQ=</Label>
<Configuration>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</Configuration>
<StartDeployment>true</StartDeployment>
<TreatWarningsAsError>false</TreatWarningsAsError>
</CreateDeployment>
Shubhendu G

Error in Global services:Invalid folders: Property Groups

We have EP 6.0 SP09 system.
When I try to add a predefined property which I created to the property
group, I get the following error.
Invalid folders: Property Groups
Invalid classes: Property Structure
The following configuration objects have some invalid
properties: "userDetailsAddress", "AppContactPersonOverview", "userDetai
ls", "access_links", "userDetailsGeneralName", "rendering", "sessionGene
ralGroup", "DEPARTMENT:", "lifetime", "default", "all_groups", "LOCATION
:", "REPRODUCTGROUPINGS:", "QIS", "reporting", "custom", "userDetailsCom
pany", "userDetailsGeneralCommunication", "system", "userDetailsGeneral"
, "SUBJECT:"
Could youplease let me know how to resolve the issue.Your immediate
attention will be greatly appreciated
Thanks,
Viji
[email protected]

everything is fine. import file and export file are good and no issues with those file
please clear my doubts
i got information like
CSSImportExport utitlity will not work in 11.1.1.4. only the LCM can do the user imports.
please confirm me ...
if its we go its very difficult to migrate like 9.2.1 to 9.3.1 to 9.3.3 to 11.1.1.1 to 11.1.1.4 for me already i migrated the HFM application and reports successfully 9.2.1 to 11.1.1.4
please advice me....

Ghosts in RF - can't remove Repository Managers or Filters

Hello,
I have problem with undeploy/remove/delete a Repository Manager or Repository Filter. To deploy them I'm using PARs (via NWDS or PAR deployer in portal), but when I use Portal Archive Deploer/Remover function for removing them, it's not working correctly.
After remove, PAR disappears from list, but in Repository Managers list I can still found my Repository Manager (works the same way for filter). Of course, I have restarted the whole server after remove. In log I can found errors complaining for missing class of my Repository Manager (when server starts).
I have tried SimpleRepositoryManager example as well and the behaviour is the same. It points to something wrong in configuration, classes are maybe hooked in some additional configuration files, which PAR remover remains intact. Or maybe - I'm doing something wrong.
Using SAP EP 6.0 SP14.
Thank you for some ideas.
Martin

Hello Martin,
I have the same problem with removing a Global Service and a repository service. The configuration is not removed when the par file is undeployed.
A possible solution is described here:
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=57900">https://www.sdn.sap.com/irj/sdn/thread?threadID=57900</a>
Maybe it works for you.
Unfortunately the trick with deploying an empty config file did not work for me.
Maybe there are some name inconsistencies. I am not sure which names have to be equal or consistent (prjconfig, KEY in IRFServiceWrapper, xml file names, ...).
Does anybody knows about this?
Daniel (on SP15)

Content Management / Repository Managers

Hi,
I must write IView for selecting Entry Points (Knowledge Management -> Content Management -> Repository Managers).
Logical way need I first all Entripoints. Which class gives me the whole list of the Entry Points in the portal?
Regards,
Raissa

Hi,
Have you see this link ?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/knowledge management and collaboration developers guide.html
Patricio.

Business Rule Repository has not been configured?

Hi,
In EAS trying to open Business Rules, I get "Repository has not been configured or you are not authorized to use Business Rules" (I get this with the admin creds)
In details, "Error loading objects from Data Source", "SQLSyntaxExceptionError: ORA-00942 table or view does not exist"
This is relatively new Production install running v. 11.1.2.1
I ran into this after my LCM migration of a Planning app failed, unable to create business rules.
IT folks tell me "the database looks fine" when I asked them about the ORA-00942 table.
Can anyone help point me to a configuration step that might have been missed?
Everything works in development environment, so if there's something to compare between the two, I'd appreciate any help.
Thanks,

Its necessary to do the following
SE80 -> BSP Application -> Tunguska -> Pages with Flow Logic -> start_sts.htm or start_sts2.htm-> Right click & display in same window -> Properties tab -> Transfer Options -> HTTPS should be UNCHECKED.

Hyperion Planning - Invalid or could not find module configuration

Hi,
I have changed the essbase properties file in both essbase server and reporting server as below and restarted all the hyperion services.
netConnectRetry=30
netDelay=2000
netSocketTimeOut=20000
After restarting the services, I am not able to open the planning applications. I am getting error message - "Invalid or could not find module configuration"
Thanks,
Aravindh K

Was that error straight after restarting the services, usually that type of error can be caused if the jdbc connection pool is full which shouldnt really be happening when the service is starting up.
Are you able to log into Planning directly though? If not, restart the service again and check if any errors are logged.
Cheers
John
http://john-goodwin.blogspot.com/

Error "Invalid or Could not find module configuration" and "Required application module HyperionPlanning.planning is not configured

Dear
I use version 11.2.1, try to open an application one by planning and workspace is the error below.
"Invalid or Could not find module configuration" and "Required application module HyperionPlanning.planning is not configured"
I checked the oracle site, but the suggested solution is not possible because using the OHS and found the file HYSLWorkers.properties.
Solution
On the server que hosts the Apache component:
1. Navigate to HYPERION_HOME%% \ common \ httpServers \ Apache \ 2.0.59 \ conf
2. Edit the file named HYSLWorkers.properties,
3. Locate the entry starting with "worker.HP__8300.port"
4. Set its value to the value of the Planning web application's listening port incremented by two,
5. Save and close
6. Restart Apache only
Anyone have any suggestions?

If restarting the services does not help, run the EPM configurator again and configure foundation web server again then restart services and try logging into workspace
Cheers
John
http://john-goodwin.blogspot.com/

Patches with pre and or post patch scripts not executable -- why?

In my frustration with update manager hangs I have had to kill processes and restart and even manually unjar files and patchadd. Sometimes I run across the error that the pre or post patch scripts are not executable. I have in the past chmod 744 and patchadd then applies the patch. This has happened several times in my latest patch update. I also had a patch ( X11) that implied a lack of entitlement but the manual patchadd showed that the real problem was a missing prerequisite patch.
My questions are:
1. is this lack of executable permission on scripts ( pre and post) by design and am I missing the correct procedure?
2. missing prerequisite scripts? why?
3. out of frustration --- IS THIS PATCHING UTILITY THE BEST THAT SUN CAN DO?

Update Manager is sometimes a little flaky, particularly on unpatched systems (as it uses many different utilities). I would suggest that if you are having problems then you should use smpatch instead - it's not really any more difficult to use and is often much quicker.
If a patch has a script that is not executable that is not a fault of updatemanager, but a fault with the patch itself (being archived with incorrect settings) or possibly your umask setting, which should ideally be globaly set to 0022 prior to patching to prevent problems during extraction and application.
If updatemanager has complained about a lack of entitlement I would tend to believe that this was the case, check the contents of your entitlement file:
# cat /var/sadm/spool/cache/entitlement/*entitlement_clientYou may be missing SolarisAllUpdates or other entitlements - please post the output.
Sun do offer other patching tools, but what is best for one person/company may not be the best for all. There is also the possibility that you don't have it setup correctly - I would ask that you run the attached script and upload the output file generated to our [Support Uploads|http://supportuploads.sun.com/] site.

Post patches bm39sp2 c2n vpn

Hi,
There are a lot of post patches (ikeapp.exe for example) needed on top of
bm39sp2 clients to work properly.
Why are these not officially released?
When is bm39sp3 coming out?
regards,
Marcel

Yes, unfortunately Novell never heard of planning, so it will probably be
next year ;(
regards,
John
"Craig Johnson" <[email protected]> wrote in message
news:[email protected]..
> In article <i74Cm.19260$[email protected]>, Mysterious
> wrote:
>> i expect to have a bm39sp2_ir1 patch within 2-3 weeks with all of the
>> post sp2 fixes on it
>>
> Great news!
>
> Craig Johnson
> Novell Support Connection SysOp
> *** For a current patch list, tips, handy files and books on
> BorderManager, go to http://www.craigjconsulting.com ***
>
>

Help Needed Configuring Post Set Up For Big Indie Feature:

We’ve got incredible performances from an amazing cast of well-known character actors from film, TV and stage, a unique and inspiring script, and some truly beautiful, cinematic footage. And now — it’s all about putting it together…
But I’m having trouble finding an accurate, effective and (most importantly) a DETAILED workflow accommodating the latest version of Premiere, to post a LENGHTY feature film shot on the RED Epic in 5k FF. I’ve reviewed videos here, but in conducting edit tests, I'm encountering all manner of glitches and problems, and need to ensure that I am properly configuring our post workflow and all of the associated hardware.
I’ll be dividing the film into project file “reels” to help keep things manageable. As editor and DP, it's also most important for me to edit on a 4k timeline (to take advantage of reframing and stabilization of the 5k). Footage is on three Pegasus II RAIDS.
There will be a LOT of FX work done outside of Premiere in AE (and other compositing and graphics programs). I’m planning to finish in Resolve, outputting at 4k.
I have the new Mac Pro with:
- 2.7GHz 12-core Intel Xeon E5 with 30MB of L3 cache
- 64GB (4x16GB) of 1866MHz DDR3 ECC - 4X16GB
- 1TB PCIe-based flash storage
- Dual AMD FirePro D700 GPUs with 6GB of GDDR5 VRAM each
A Sonnet Echo Express III Desktop 3-Slot (with Thunderbolt upgrade) housing the following:
- Red Rocket
- Connection card for HP LTO5 Ultrium 3000 Sas Ext Tape Drive
If needed, I’m open to acquiring other cards or hardware, too (possibly adding the Red Rocket-X to the mix). And if the referral of a PAID individual with firsthand knowledge of such a setup – to at least help with the initial set up and configuration – is what I need, I’m open to that, as well.
We truly have an amazingly powerful compilation of principal photography, and a great story to tell — I just need to overcome this major hurdle of setting up our post. As a somewhat newbie to Premiere, I greatly appreciate any advice, pointing-me-in-the-right-direction, or suggestions of individuals to help oversee this for compensation and screen credit that anyone can offer me here...
Many Thanks,
Bill

Oooh...big involved questions and many of them.
If it helps..
A few things I know I would do before even starting on the actual film edit
..is give the new system a massive shakedown.
Thrash the hardware and software with test footage , graphics and audio etc.
Test the pipelines and workflows.
Set up a BACKUP routine. DO NOT RELY ON AUTOSAVES
Would NOT do O.S updates once started with a stable system.
Me...I would not use a Dynamic Link workflow for FX. (I would use D.Is)
Would create a flow chart plan for the edit and post prod to avoid generation losses, efficiencies and scheduling.
Work toward lock downs before FX , audio, CC and Grade. (Avoid the trap of being creatively impatient for the benefit of a smooth edit experience)
Sort this first...
I'm encountering all manner of glitches and problems, and need to ensure that I am properly configuring our post workflow and all of the associated hardware.
You might want to specify some of this stuff and see if you get answers here or elsewhere..
Suggestion - can you wait for next version of PPro ? - coming very soon evidently. Start with latest version so you don't need to update midstream. A feature takes a long time to post and some cool new features may help. eg Master Clip enhanced.
Have you considered Prelude in the workflow to log and set up your project. ( Never used it myself but I would consider/investigate it for long form)
Good luck and enjoy the edit process.

Invalid Account Code Message 173-9 when posting Outgoing Payment

When attempting to post an Outgoing Payment our customer recieves the following error: Invalid Account Code Message [173-9]. The local currency is CDN and Invoice currency is US. The error occurs only when back dating the outgoing payment to Jan 31, 2011 on Posting, Due and Doc Date. If the Posting/Doc date are left as the current date and the Due is set at Jan 31, 2011 then there is no issue.
I've checked the posting periods, G/L determination and BP setup.
Note: this exact process has been completed many times in the past.
Version:
SAP B1 2007A SP01 PL11
Any assistance would be appreciated.
I've seen another post with a similar question but the answer did not solve our issue.
Invalid Account Code when adding outgoing payments

Hi,
You may check this: Invalid Account Code error when posting AP Credit Note
Thanks,
Gordon

BRS configuration- Posting directly to customer account

Hi,
I have done BRS configuration and I am able to do clearing, posting to bank charges etc based on configuation when I upload the bank statement thro FF_5.
But I have a new scenario, where while uploading a Bank statement thro FF_5, based on the external transaction type, the system has to post directly to customer account.
Dr Customer Account xxxx
Cr Bank Main account xxxxx
Is it possible in EBS configuration or what is the steps I need to follow to achieve the above entry.
Pls help..
Regards
Surya

Hi
Using the posting rule, it is possible to generate the accounting entry you want, but the problem is how the SAP system will know the entry is for which customer. There is also a std T Code FF68 for the same for manual entries from which accounting entries should be generated the way which you have raised in your first post. For your information, you can have the following user exits in FF_5, where in you can write your code
FEB00003 Customer exit for Finnish bank statement TITO format
FEB00004 Raw data processing, user exit SWIFT MT940
FEB00005 Electronic Banking - Account Statement Object Generatio
FEDI0005 Function exists for EDI-ICODS in FI - Elec.bk stmt/lock
Regards
Sanil

Install Grid Control and use repository within a DataGuard configuration

Hello,
I need some information if anyone has experience in the following
We have severel database running in DataGuard standby configuration.
I want to install OMS 11.1 and use the repository in a primary and standby configuration.
My configuration will look like this:
host 1     Primary Repository database
     OMS service 1
host 2     Standby Repository database
     OMS service 2
During normal operation i want to have 2 OMS services running.
Whenever a failover is necessary, i want to active my standby database and run OMS service 2.
Can this be a working configuration?
Any help is appreciated.
Regards,
Ben

Hi.
As far as I know, the dbconsole installed with the Oracle database applies for only one database on one server. The information accessed by the dbconsole relies within the sysman schema inside the actual database. For a database environment with 10 databases, it is possible to install grid control and manage all these databases despite version and OS. And I think that grid is a good solution to such an environment.
The grid installation itself is a application server installation, and I suggest if possible that you separate the rdbms server and the server that contains the grid control.
The repository database the grid control uses can either be installed in the 10g environment or in the grid control environment (server). You can place the repository in a new database in a separate ORACLE_HOME from the actual grid control application server.
Good luck.
rgds
Kjell Ove

Invalid folders: Repository Managers in KM Configuration Post Patch 34

Similar Messages

Maybe you are looking for