Invalid Number, Telco delayed message
Hi,
I use a PRI T1 with SIP Voice Gateway. Whenever i dial an invalid number, the message from telco saying this is invalid is received after 100sec. Is there any way to reduce the time the Telco message is played.
Hi Madusudan,
You can check with Telco the timer or parameter in signaling based on which they decide when to play the Invalid number announcement. Once it is known you can check whether it can be tweaked on your Cisco box through a service parameter or some other setting.
HTH
Manish
Similar Messages
-
I'm producing 'invalid NUMBER OF arguements' - but where?
afternoon gurus..
This line was bringing a 'ORA-00932: inconsistent datatypes: expected DATE got NUMBER' WHEN it was this..
, DECODE(SIGN(TRUNC(apid.accounting_date)- TRUNC('14-jun-2011')),1,0, ROUND(NVL(apid.quantity_invoiced,0),2) )
,apid.accounting_date, NVL(apid.quantity_invoiced,0)
..so I added a 'to_date' TO it..
, DECODE(SIGN(TRUNC(apid.accounting_date)- TRUNC(TO_DATE('14-jun-2011','dd-mon-yyyy')),1,0, ROUND(NVL(apid.quantity_invoiced,0),2) )
,apid.accounting_date, NVL(apid.quantity_invoiced,0)
..AND it now produces THE 'invalid NUMBER OF arguements' message..
how DO I get OVER this please?
TIA..
JoeMissing a bracket I think...
DECODE(SIGN(TRUNC(apid.accounting_date)- TRUNC(TO_DATE('14-jun-2011','dd-mon-yyyy')),1,0, ROUND(NVL(apid.quantity_invoiced,0),2) )should be
DECODE(SIGN(TRUNC(apid.accounting_date)-TRUNC(TO_DATE('14-jun-2011','dd-mon-yyyy'))),1,0, ROUND(NVL(apid.quantity_invoiced,0),2) ) -
Error Message - ORA-01722 Invalid Number
Hello:
I have the following situation. When I create an organization, a record is inserted into the following table, AGREEMENTS, and populates four fields.
I have an update form which selects the organization from the AGREEMENTS table so the user can populate the rest of the table. In addition, on this form, there is a drop-down box which allows the user to select the name of a legal document along with the version of the document in which the user needs to select. This select list is created via an LOV joining three tables. The item name for this select list is :P6_DOCUMENT.
The code for the LOV is:
SELECT S.DOC_NAME||' - '|| O.VERSION_NO AS DOC, O.ORG_DOC_CURR_KEY
FROM SUPPORTING_DOCS S,
ORG_DOC_CURR_VER O,
AGREEMENTS H
WHERE
S.DOC_TYPE = 'HISA'
AND S.SUPPORTING_DOC_KEY = O.SUPPORTING_DOC_KEY
AND H.ORG_KEY_LE = O.ORG_KEY
AND O.ORG_KEY=:P6_ORG_KEY_LEWhen the user completes the form, the SUBMIT process is a PL/SQL block consisting of an UPDATE statement to update the AGREEMENTS table based on the selected organization and an INSERT statement to insert a record into the AGREEMENTS_DOC table to store the value stored in :P7_DOCUMENT.
Ok, now here is where my problem starts.
When I first bring up the form and I select the organization I want to update, I click the Search button to find the organization and I receive the following error message: ORA-01722 Invalid Number.
At this point all I'm doing is a basic search. There is no insert/update or anything going on. I'm not understanding why I would be receiving this error message.
The search is based on the database column ORG_KEY_LE whose datatype is NUMBER.
In my application, the item assigned to ORG_KEY_LE is P6_ORG_KEY_LE.
I have a PL/SQL block process created (On Load-Before Header) in the Page Rendering area of my page definition. The PL/SQL code that is written is:
BEGIN
IF :P6_SEARCH_ORG != '0' THEN
:P6_ORG_KEY_LE := :P6_SEARCH_ORG;
END IF;
END;I then have an Item created, :P6_SEARCH_ORG, which is a Select List. In the LOV portion of the page for this item, I have the following:
select ORG_KEY_LE display_value, ORG_KEY_LE return_value
from AGREEMENTS
order by 1The reason for using this table is because this table contains the newly created organization which needs to be updated with the remaining columns of data.
I then have a Search button in the Button area which has the following settings:
Button Position: Region Template Position #CHANGE#.
Condition Type: Value of Item in Express 1 is NULL.
Expression 1: :P6_ORG_KEY_LE.
To troubleshoot this problem, I created two pages, one page to do the UPDATE and the second page to do the INSERT.
The SEARCH functionality in both pages are identical.
When I run my UPDATE page, which only involves updating the missing fields, the process works. I have my search box, I'm able to search for the organization, make my updates, and I'm good.
When I run my INSERT page, which involves inserting the record with the assigned document, I receive the error message after I click the SEARCH button. In order to INSERT the record into this table, I first need to SELECT the organization that was UPDATED in the AGREEMENTS table (using the UPDATE page described in above paragraph). When I select the organization, the user can then assign the appropriate legal document to the organization and insert the record into the AGREEMENTS_DOC table.
Can someone help me with this error message? I'm not sure why I am able to perform my SEARCH on a page with the UPDATE statement, not able to perform the SEARCH on the page with my INSERT statement, and not be able to perform the SEARCH on the page that combines the UPDATE and INSERT statements.
I did some more troubleshooting and I do believe my SUBMIT process which contains the INSERT statement is the issue. I created a fourth page which doesn't have a SUBMIT process. I brought up the form, searched for my organization and the information for that organization appeared. The problem is definately with my UPDATE/INSERT process.
The PL/SQL block for the Submit process is the following:
BEGIN
update
MDD.HISA_AGREEMENTS
set
LAST_UPDATED_BY=V('APP_USER'),
APPROVER_SALUTATION=:P6_APPROVER_SALUTATION,
APPROVER_FIRST_NAME=:P6_APPROVER_FIRST_NAME,
APPROVER_MIDDLE_INITIAL=:P6_APPROVER_MIDDLE_INITIAL,
APPROVER_LAST_NAME=:P6_APPROVER_LAST_NAME,
APPROVER_NAME_SUFFIX=:P6_APPROVER_NAME_SUFFIX,
APPROVER_EMAIL_ADDR=:P6_APPROVER_EMAIL_ADDR,
SPONSOR_EMAIL_ADDR=:P6_SPONSOR_EMAIL_ADDR,
APPROVER_TITLE=:P6_APPROVER_TITLE
where
ORG_KEY_LE=:P6_ORG_KEY_LE
INSERT INTO
HISA_AGREEMENT_DOCS
(HISA_AGREEMENT_DOC_KEY,
ORG_KEY_LE,
APPLICATION_KEY,
STATUS,
STATUS_DATE,
CREATED_BY,
ORG_DOC_CURR_KEY)
VALUES
(HISA_AGREEMENT_DOC_KEY_SEQ.NEXTVAL,
:P6_ORG_KEY_LE,
:P6_APPLICATION_KEY,
'C',
SYSDATE,
V('APP_USER'),
:P6_DOCUMENT)
END;There is something wrong with the above statement and I do not understand what it could be. Can someone help?
Thanks for the help.Hi,
I believe you are on to something.
The select list for item :P6_DOCUMENT appears when I first bring up the form. When I select my organization and receive the error message, I clicked on the Session in the Developer's bar. The value in item/field :P6_DOCUMENT shows %null%.
This is the path in which my user would like to accomplish her task:
1. Select an organization
2. Display the information for that organization from the AGREEMENTS table
3. Enter the data for the remaining fields in the AGREEMENTS table
4. Select the document (:P6_DOCUMENT) from the drop-down.
5. Click Submit
6. Update the AGREEMENTS table with data entered in #3.
7. Insert a record into the AGREEMENTS_DOC table with the selection from #4.
Somehow I need the :P6_DOCUMENT field not to show the %null% during the SEARCH functionality. I think that is causing the problem.
How do I fix this? -
Error Message (ORA-01722: invalid number) when add amount into Number field
I am using VB.net, trying to insert data into a field called amt with Data Type 'Number'.
my vb.net code is as follows
Dim oradb As String = DatabaseConnectionString
Dim AmountValue As Decimal = 123.45
'get the connection
Dim conn As New OracleConnection(oradb)
'open the database connection
conn.Open()
'create oracle command
Dim cmd As New OracleCommand("INSERT INTO TBL1 (AMT) VALUES (:AMT)", conn)
cmd.CommandType = CommandType.Text
cmd.Parameters.Add(":AMT", OracleDbType.Decimal, AmountValue, ParameterDirection.Input)
'Execute
cmd.ExecuteNonQuery()
I got error message "ORA-01722: invalid number". Please helpDid you also change the below line before inserting Integer 123:
cmd.Parameters.Add(":AMT", OracleDbType.Decimal, AmountValue, ParameterDirection.Input)
to
cmd.Parameters.Add(":AMT", OracleDbType.Integer, AmountValue, ParameterDirection.Input) -
'ORA-01722: Invalid number' error message in BeX
Hi Gurus,
We have a new report built on top of a DSO. When I run this report, I get the message 'ORA-01722: invalid number'. On furthur testing, I found that when I move two objects 'Date Changed' & 'Time Changed' [both are 'Z' objects we created] from the 'Rows' to 'Free Characteristics', the report runs as expected. So the issue seems that it is with these two objects. One of them is of type 'DATS' & the other of type 'TIMS'. These two are mapped to respective 'Date' & 'Time' fields in SAP R3.
SID's exists in the Master Data tables for both these objects. The data for both the fields contains the normal 'Date' & 'Time' values.Running the query using RSRT shows the same error message. The RSRV check on this report says that 'Query execution not possible as the variables contain invalid values'.
I have seen a couple of other posts in SDN with similar issues but none of them have a solution identified so far. Just wanted to check if anyone who has experienced this issue have been successfully able to resolve it?
Thanks
ArvindHi Ravi,
Thanks for your prompt reply. Yes, the 'Date' & 'Time' objects have 0DATE & 0TIME as reference objects.
I couldn't find any invalid vallues for these date and time fields. If invalid values were present, wouldn't the DSO activation have failed?
Thanks
Arvind. -
Does anyone know why I keep getting an error message, "Error invalid number. Please re-send using a valid 10 digit mobile number or valid short code. The numbers I'm texting to, are valid numbers.
Did you ever get resolution to this problem?
My coworker has the identical issue, including the number (+1 (1)(216)116-11) in the error reply. -
HT204204 Error invalid number when trying to send a TXT message
While trying to send someone a TXT on craigslist, I inadvertently sent a TXT to a 7 digit number. I received back the following message (Where <XXXXXXX> is the 7 digit number I tried to TXT).
I'm using an iPhone 6 (brand new) with the latest iOS. Handoff and TXT message forwarding is set up.
From +1 (1) (216) 116-11:
<XXXXXXX> Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code. (The message I sent went her).
After that I attempted to send to the correct 10 digit number but every subsequent attempt to message the correct number has failed. I have tried the following:
Hard reset of the device.
Deleting the conversation
Creating a contact with the correct number
Using Messages to create a new conversation
Replying to messages received from the number.
However nothing I've been able to do resulted in a message getting sent.I think your region settings are interfering the format of the US number. What country are your region settings set to?
This is how they should look: +1 (216) 116-1122
The +1 is optional when inside the USA/Canada -
I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114. Online I found a discussion that stated i needed to delete contact and re-add. I have done that to no avail. Any ideas?
I had the same issue with the iPhone 6 and tried everything! I now understand that at some point I stored a number for a contact without including the area code and sent a text message. So, to correct the issue, you must literally "erase" all references to the contact, not just the number. Deleting the contact and entering a new one is not enough because the iPhone stores references to that number in multiple places. The steps below worked and are very simple:
1) On the contact screen, delete everything stored for that number. You can't just edit the contact to fix the problem, so write down or record the info somewhere before you complete this step. Choose edit and then select DELETE to eliminate the entire contact which means home, work, cell, email address, etc.
2) Delete the entire string of messages you sent to that number. That's every single message...
3) Now delete the entire string of invalid 2114 messages you received after your text(s) failed.
4) Finaly, remove the contact from FAVORITES if you saved it that way.
5) To validate that all this worked, simply go to the keypad or contact screen and enter the number associated with the contact to verify successful removal. I used the keypad and dialed to confirm. If the contact number still shows up, you need to go back and recheck your steps. Trust me, I had to do this a few times.
Several posts suggested that you should reset and turn off your phone. After following these steps, it was not necessary for me to reset or turn off my device.
is there a much faster way to achieve the same results? Probably, but this was safe for an iPhone novice and may help you avoid inadvertently deleting other contacts or replacing factory settings that you need. -
When i tried to text a message from my contact list i received a message saying invalid number of digits. i used the area code with the number but still would not send
Call your carrier and see what they suggest.
-
Message sent using invalid number of digits. Please resend using 10 digit number or valid short code. Msg 2114
How can this be fixed? Most of my numbers are saved as 7 digitSo I THINK I've figured this out. Hopefully. I was getting the same problem when I was trying to text my boss and my dad. I went back to try to delete the contact and try again and I noticed that I had the little phone icon next to their numbers and not the messaging text bubble. But I'd also left their type of phone as "home" in the drop down menu. I edited that to mobile and boom, got the text messaging bubble. Tried texting them both, I could now send the message.
I think if the number is set to home the phone assumes it's a landline and doesn't even try to send. I think the people who have had success deleting and re-inserting the contact edited that piece of information without realizing it.
I really hope this solves your problem! -
Error Invalid Number message when sending text
Ever since I upgraded to an iPhone 5s I get an Error Invalid Number message when sending a text to a phone number that used to work just fine from my 4s. In fact I can receive a text from this number but when I try to reply to that text I get the error message again.
I deleted the contact info in case there was something broken there and I'm trying it with just the raw phone number but without any luck. What can I do? It's my boss's number so it's important I fix this problem. All other contacts and texts are working just fine, it's just this one phone, a Samsung galaxy on T-mobile if that helps.I am having the same exact issue with my Nokia Lumia 920 Windows phone. I was texting my son this morning when one text immediately returned a "+1 (112) 161-1611 Error Invalid Number. Please re-send u sing a vlid 10 digit mobile number" message. His contact info looked fine, but I edited it, re-saved it and tried texting again. Same result - except the number reported in the error message showed 2 "1s" in front of his mobile number. I was able to text my wife a couple of times to report this to her and then it happened with her number in exactly the same manner. I am still able to text people I work with - so this leads me to believe it has something to do with phone numbers that have been saved outside of my corporate contact list. I will be monitoring this posting to see if there is a fix.
-
Error Invalid Number message in texts.
I thought I fixed this problem a month ago per another discussion's suggestions.
I had been getting the "+1(1)216116-11 Error Invalid Number Please re-send using valid 10 digit number" message even though the numbers were 10 digit.
I deleted the contacts and texts. Updated software to current iOS 7.1. Powered off then back on. Then re-entered the info.
It worked until this morning with the same 2 random contacts. But it is my son and best friend. So now I am frustrated.
I have checked more discussions and the fixes seem to be random as well. Does anyone have any new ideas?I had this same issue to a number I had been texting daily for months! After I tried everything--I figured it out! Even after I deleted the contact and set it all back up again, it still wouldn't work and I would get the "+1(1)216116-11 Error Invalid Number Please re-send using valid 10 digit number" error message. BY chance, as I was typing in the number for a new trial text, the number popped up from "recent history" (the list of all recent texts to that number or name). Even though I had deleted ALL texts to and from her and all contact info, the number was still stored elsewhere. It dawned on me that her number and her contact info was stored in the memory as "recent text history". I had to delete every instance of a text that had her number in it (including group texts), then when I reentered it, it worked! I believe the whole thing started when someone had her incomplete number in a group text, and from then on, it was getting her number from that recent text instead of mine! I found it by accident and there HAS to be an easier way, but here are the steps:
1. Delete the name and number from your contact
2. Start a new text by typing in the first letter or so of the person's name (or the digits of the number) and they should still pop up in a drop down box
3. Instead of selecting it for the text recipient, select the little "i" beside it and a new menu will pop up (that is the RECENT menu)
4. Select REMOVE from the top right corner
5. Do this for every instance with the name and number in it
6. Try a new text--nothing should pop up when you enter the number if everything is removed. It should now work
Hope this helps someone else! -
Error Invalid Number - 7 digit number prevents future SMS messages
I can't send SMS messages to one of my contacts at all.
my contact had only 7 digits under "Mobile" phone because he was in my area code.
I tried to send a text to him and got this response:
"####### Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code. <my text message>"
The ####### was his 7-digit number from the contact info.
So, I modified the contact info and put in the area code to make it 10-digits. I tried sending another text message, but that had the same exact response (with only 7 digit number).
I cleared the messages for that contact and tried again, same result.
I synch'ed my iPhone and then tried again, same result.
My contact now has the correct 10 digit number, but whenever I try to send a SMS message to him I get the response with the 7-digit number saying Error Invalid Number.
How can I fix this?Apparently the phone is wrongly remembering the shorter number, so try this. Edit the contact to put back the 7 digit number, but add a NEW phone number with the 10 digit code, and a different label, perhaps a custom label. Try sending an SMS to that new number. If it works, you can just delete the old 7 digit number entry entirely.
-
Invalid number and other equally informative error messages
Hi all. If you would be interested in an improvement to Oracle's basic error messages this thread may be worth continuing.
The problem illustrated:
This statement 'select to_number('a') from dual;' produces ORA-01722: invalid number. No worries, easy to solve.
Now you go bavk into you mind and pick any 1000+ lines SQL statement that produced the same error and tell me:
How did you find the location of the error - and the cause?
And then - did you ever wonder why Oracle left you witout the information that it actually had - right in fromt of its very nose: the statement, the column and the value taht caused the error.
Best regards
Niels Jessen, 63 years old - and still wonderingSQL> select *
2 from (
3 select to_number('a')
4 from
5 dual
6 )
7 ;
select to_number('a')
ERROR at line 3:
ORA-01722: invalid number
SQL>Isn't it clear enough ? Line and column identified clearly.
Nicolas. -
ORA - 01722: invalid number in Discoverer Desktop/4i
Hi,
We have a report that has a date range as parameter. When the report is run for a smaller date range (sometimes specifically 87 days...though this may be a coincidence), the report runs fine. Problem occurs when we want data for a larger period (like an year or 1/2 year), the report errors out with invalid number error. I've seen a lot of messages posted on this topic, but that's not of much help. Any help in this regard is totally appreciated.
Thanks,
Alka.Here's the select (Please note that incident_date is used for checking the date range):
SELECT par.party_id
,par.party_name customer_name
,par.party_number customer_number
,inc.incident_date
,msi.segment1 item_number
,msi.description
,ced.quantity_required qty_used
,COUNT(msi.segment1) item_count
FROM cs_incidents_all_b inc
,hz_party_sites sit
,hz_parties par
,cs_estimate_details ced
,mtl_system_items_b msi
,qp_list_headers_all qlh
,qp_list_lines_v qll
WHERE inc.incident_id = ced.incident_id
AND ced.inventory_item_id = msi.inventory_item_id
AND msi.organization_id = 123
AND ced.inventory_item_id = qll.product_attr_value
AND qll.list_header_id = qlh.list_header_id
AND inc.install_site_id = sit.party_site_id
AND sit.party_id = par.party_id
AND qlh.NAME = 'ABC'
AND qll.operand >= 25
and ced.quantity_required>0
GROUP BY par.party_id
,par.party_name
,par.party_number
,inc.incident_date
,msi.segment1
,msi.description
,ced.quantity_required
Maybe you are looking for
-
Sales order value exceeds value of contract
Hi, when we create a sales order with ref to contract it allows to create a sales order for more value than contract. validation is in place is sales order quantity should not be more than contract quantity. We need to have an check on the value of s
-
XML Forms show raw xml after transport
Hallo experts, at the moment I am working to set up a SAP Enterprise Portal 7.4. I was able to export KM content from our old 7.0 portal. The only problem i am experiencing is that xml forms, that I exported and imported through standard KM export /
-
for instance, in the website I created, www.menletter.org, the fonts are not the ones I created and the bullets are pinpoints. Seems to do fine in MS IE.
-
Field's content from CreateDynaset generates Automation Error in VB
I'm using Oracle Object (Oracle 8.1.6) within my Visual Basic 5 project. I have a SQL Select that returns 2 fields: Field #1 contains the value 0,272166666666667 Field #2 contains the value 0,00764166666666667 When I try to read the content of field
-
Your photo library is either in use by another application or has become unreadable-- this is the message when I try to open iPhoto. What do I do?