Problem with the query in group by clause

hi, i have problem with group by clause, can some one please help me.
select
header_id,
(select sum(nvl(dr,0) - nvl(cr ,0)) from temp_tab a1
where
a1.country=a.country
and a1.source='AP'
and a1.header_id=a.header_id) WHT,
sum(dr),
sum(cr) from temp_tab a
group by header_id,
(select sum(nvl(dr,0) - nvl(cr ,0)) from temp_tab a1
where
a1.country=a.country
and a1.source='AP'
and a1.header_id=a.header_id)
select * from temp_tab
drop table temp_tab
create table temp_tab(header_id number ,line_num number, country varchar2(2),
source varchar2(2), dr number, cr number,primary key(header_id,line_num));
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(1, 1,'NL','AP',100,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(1, 2,'PO','AP',20,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(1, 3,'NL','AP',70,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(2, 1,'NL','PA',100,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(2, 2,'NL','PA',100,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(3, 1,'KR','PO',100,20);
commit;
Appreciate your help.
Thanks,

select header_id,
         (select sum(nvl(dr,0) - nvl(cr ,0)) from temp_tab a1
         where a1.country=a.country
         and a1.source='AP'
         and a1.header_id=a.header_id) WHT,
         sum(dr),
         sum(cr)
from temp_tab a
group by header_id
,countryIt's kinda hard to follow what your query does... maybe because I'm only at my second coffee..
Edited by: Alex Nuijten on Oct 2, 2009 8:07 AM

Similar Messages

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Hi .
 I was creating the pass the values t in temp tables though s sis package vs2012 .
 First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
 exec USP_GETMP02333
 go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one executive sql
In 2nd excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2nd excutive ql task .
Iam getting this type of errors,
 [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help me

Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.

Problem with the query of Sharepoint Calculated Fields

Hello,
I am developing an application in sharepoint 2013 foundation. but i have problems with a list, when executing a caml query on a calculated field. I try the solution of this blog
http://sptalks.wordpress.com/2013/03/25/query-on-calculated-field-problem
but i got no result
attentive to any comments
thanks

Hello,
This is my CAML Query
<View>
<ViewFields>
<FieldRef Name="ID" />
<FieldRef Name="PermMask" />
<FieldRef Name="FSObjType" />
<FieldRef Name="Nombre" AutoHyperLink="TRUE" />
<FieldRef Name="Apellidos" AutoHyperLink="TRUE" />
<FieldRef Name="Cargo" /><FieldRef Name="Edad" />
<FieldRef Name="Compa_x00f1_ia" />
<FieldRef Name="Created" />
</ViewFields>
<Query>
<GroupBy Collapse="TRUE" GroupLimit="30">
<FieldRef Name="Compa_x00f1_ia" />
<FieldRef Name="Edad" />
</GroupBy>
<OrderBy>
<FieldRef Name="ID" />
</OrderBy>
<Where>
<Contains>
<FieldRef Name="Ano" LookupId="FALSE" />
<Value Type="Text">2014</Value>
</Contains>
</Where>
</Query>
</View>

Problem With The Query

Hi gurus,
I have a problem in a query
I have a lot of records that are the same and I dont want to sum the value of them more than once. How can this be done??
The following table should illustrate my problem:
DEPT--MONTHCFBID----SCORE
ALST--APR100--
3
ALST--MAY100--
3
ALST--JUN101--
4
ALST--APR102--
5
Overall Score 15
I want the Overall Score to be 12. (only summing up unique records Of CFBID).
Any help will be greatly appreciated.
Regards
Supraja.K

Hi,
I had Done with Formula with Excveption Aggregation as Average And reference charecterstic as CFBID
DEPT--MONTHCFBID----SCORE
ALST--APR100--
3
ALST--MAY100--
3
ALST--JUN101--
4
ALST--APR102--
5
Overall Score 15
I want the Average Score12/3 = 4.
but I am getting as 15/3 = 5
What to Do any other Solution please

Problem with the Pivote Table order by Clause in OBIEE report

Hello All,
Can anyone help?
I am developing a report with 3 columns
1. Year
2. Customer name
3. Amount
I need Year in Ascending & Amount Descending (Group by Year and then Desc by amount)
In Table view data is displayed correctly, but in Pivote Table it’s not sorting correctly
Table View ( This is correct)
Year     Customer Name     Amount
2009,     a1,     260,000.00
     a2,     152,030.00
     a3,     20,000.00
2008,     a6,     193,080.00
2004,     a7,     860.2
     a8,     114.7
2003,     a9,     200,243,813.40
     a10,     91,351,364.10
Pivote Table Results as follows:
Year     Customer Name     Amount
2009,     a1,     260,000.00
     a2,     152,030.00
     a3,     20,000.00
2008,     a6,     193,080.00
2004,     a7,     860.2
     a8,     114.7
2003,     x,     26,374,818.00
y, ....................
a9, 200,243,813.40
For year 2003 in place of 'x' value a9 value has to be shown........
Regards,
SMA

Your post doesn't help a lot. Why it's still not solved ?
If it's caused by the ascendant order, the only way that you have is to pivot your table :
http://gerardnico.com/wiki/dat/obiee/presentation_service/obiee_transformation_table_to_pivot
And then you can set all sort that you want.
success
Nico

Issue with the query

Hi Friends,
I am having a problem with this query. The query is to fetch all the elements for the employees. The elements that need to be fetched are set up in the flex sets.
In the table fnd_flex_values there are columns start_date_active and end_date_active fields and these are null. In the below query when I use the condition
and trunc(sysdate) between NVL(ffv.start_Date_active,TO_DATE('01-JAN-1951','DD-MON-YYYY')) and NVL(ffv.end_Date_active,TO_DATE('31-DEC-4712','DD-MON-YYYY'))
the query fetches the results in 5seconds
but when I replace the same query with the statement
and to_date(to_char(ppa.date_earned,'DD-MON-YYYY'),'DD-MON-YYYY') between NVL(ffv.start_Date_active,TO_DATE('01-JAN-1951','DD-MON-YYYY')) and NVL(ffv.end_Date_active,TO_DATE('31-DEC-4712','DD-MON-YYYY'))
the query takes a lot of time. Infact it gets timed out
Columns start_date_active and end_date_active fields are date type. Can anyone say what is the issue with this query
When I give the sysdate instead of ppa.date_earned date
select papf.person_id, papf.full_name, papf.employee_number
,petf.element_name, pivf.name,
prrv.result_value, ppa.date_earned,ppa.effective_date, to_char(ppa.date_earned,'DD-MON-YYYY') date_earned, paaf.assignment_id, petf.effective_start_date
,petf.effective_end_date, ffv.*
from per_all_people_f papf
,per_all_assignments_f paaf
,pay_payroll_actions ppa
,pay_assignment_actions paa
,pay_element_types_f petf
,pay_input_values_f pivf
,pay_run_results prr
,pay_run_result_values prrv
,per_person_type_usages_f pptuf
,per_person_types ppt
,fnd_flex_values ffv
,fnd_flex_value_sets ffvs
where 1=1
and papf.person_id = paaf.person_id
and trunc(ppa.date_earned) between trunc(papf.effective_start_date) and trunc(papf.effective_end_date)
and trunc(ppa.date_earned) between trunc(paaf.effective_start_date) and trunc(paaf.effective_end_date)
and paa.assignment_id = paaf.assignment_id
and paa.action_status='C'
and ppa.payroll_id = 61
--and ppa.consolidation_set_id = 108
and ppa.payroll_action_id = paa.payroll_action_id
and prr.assignment_action_id = paa.assignment_action_id
and prr.element_type_id = petf.element_type_id
-- and trunc(ppa.date_earned) between trunc(petf.effective_start_date) and trunc(petf.effective_end_date)
and trunc(sysdate) between petf.effective_start_date and petf.effective_end_date
and prrv.run_result_id = prr.run_result_id
and prrv.input_value_id = pivf.input_value_id
and prr.status in ('P','PA')
and pivf.name ='Pay Value'
and ppa.date_earned between pivf.effective_start_date and pivf.effective_end_date
and ppa.time_period_id=145
and paaf.person_id = pptuf.person_id
and pptuf.person_type_id = ppt.person_type_id
and ppt.user_person_type = nvl('Employee',ppt.user_person_type)
and trunc(ppa.date_earned) between pptuf.effective_start_date and pptuf.effective_end_date
and petf.element_name = ffv.flex_value
and ffv.flex_value_set_id = ffvs.flex_value_set_id
and ffv.enabled_flag ='Y'
and ffvs.flex_value_set_name='GROUP_ELEMENTS'
and trunc(sysdate) between NVL(ffv.start_Date_active,TO_DATE('01-JAN-1951','DD-MON-YYYY')) and NVL(ffv.end_Date_active,TO_DATE('31-DEC-4712','DD-MON-YYYY'))
-- and trunc(ppa.effective_date) between nvl(ffv.start_Date_active,trunc(ppa.effective_date)) and NVL(ffv.end_Date_active,trunc(ppa.effective_date))
-- and to_date(to_char(ppa.date_earned,'DD-MON-YYYY'),'DD-MON-YYYY') between NVL(ffv.start_Date_active,TO_DATE('01-JAN-1951','DD-MON-YYYY')) and
order by ffv.parent_flex_value_low, papf.employee_number;
Thanks

ʃʃp wrote:
/* Formatted on 2012/06/11 13:34 (Formatter Plus v4.8.8) */
SELECT DISTINCT fr_ir_code, fr_fc_code1, product1, param_rep_prd, no_of_links_start_ir, no_of_supps_start_ir
 FROM comm_exst_rp_comit_aggr_irview
 WHERE fr_ir_code = 'AS01'
 AND srta_period = 2
 AND srta_year = 2011
 AND param_rep_prd = '2011-2'
 AND DECODE (:bind_variable, 'All', 1, 0) = DECODE (:bind_variable, 'All', 1, 1)
 GROUP BY fr_ir_code, fr_fc_code1, product1, param_rep_prd, no_of_links_start_ir, no_of_supps_start_ir
UNION
SELECT DISTINCT fr_ir_code, fr_fc_code1, product1, param_rep_prd, no_of_links_start_irda AS no_of_links_start_ir,
 no_of_supps_start__irda AS no_of_supps_start_ir
 FROM comm_exst_rp_comit_aggr_irview
 WHERE fr_ir_code = 'AS01'
 AND srta_period = 2
 AND srta_year = 2011
 AND param_rep_prd = '2011-2'
 AND da_status = 'N'
 AND DECODE (:bind_variable, 'All', 1, 0) = DECODE (:bind_variable, 'All', 0, 0)
 GROUP BY fr_ir_code, fr_fc_code1, product1, param_rep_prd, no_of_links_start_irda, no_of_supps_start__irdaYes Union is one of the best solutions for handling two queries.
As per my understanding DECODE function use is:
DECODE (value,<if this value>,<return this value>,
<if this value>,<return this value>,
<otherwise this value>)
But I am little bit jumbled for understanding below two lines in the query..
1)
AND DECODE (:bind_variable, 'All', 1, 0) = DECODE (:bind_variable, 'All', 1, 1)
2)
AND DECODE (:bind_variable, 'All', 1, 0) = DECODE (:bind_variable, 'All', 0, 0)Can you please tell me how the comparision is done using DECODE function?

Problem with Hierarchical query

Gurus,
I have a problem with hierarchical query, which I am pasting below.
select sys_connect_by_path (Fname,'/')"PATH",Fname,id,level
,(SELECT COUNT(ID)-1 FROM (SELECT CONNECT_BY_ROOT LNAME LNAME,ID FROM CMT_PERSON
START WITH ID = 'emplo000000000126009'
CONNECT BY PRIOR ID=MANAGER_ID)
GROUP BY FNAME)"COUNT"
from CMT_PERSON
WHERE
LEVEL <= 4
----And ID='emplo000000000001877'
CONNECT BY PRIOR id=manager_id
----AND NOT LEVEL > 3
START WITH ID='emplo000000000126009'
As per the result, count is getting repeated for all the levels. That is, count is coming 16100 for every level, Can you please help where exactly I am going wrong
Regards

You do not say anything about what count you want to get?
A wild guess could be:
select
 sys_connect_by_path (p1.fname, '/') "PATH",
 p1.fname,
 p1.id,
 level,
 (select count (id) - 1
 from
 (select connect_by_root p2.lname lname, p2.id
 from cmt_person p2
 start with p2.id = p1.id
 connect by prior p2.id = p2.manager_id)
 ) "COUNT"
from cmt_person p1
where level <= 4
connect by prior p1.id = p1.manager_id
start with p1.id = 'emplo000000000126009';Since your inner query simply starts with the hardcoded employee id, naturally it will give you the same count.
My guess is your inner query should start with the person id from the outer query?
If that is not the case - please state in plain english what you are trying to accomplish ;-)
(Oh, and please paste code within tags so we can read it more easily...)

Content Tab: None of the fact tables are compatible with the query request

Hi All,
**One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
I have made a rpd the joins in physical layer as shown below:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
And the BMM layer as:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
Dim - Comment Code Details
Fact - Complaint
Dim - Service Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
Thanks in advance,
Dev

Hi Deepak,
Option 1:
My tables in physical layer are joined as below:
D1--> F1 <--D2--> F2 <--D3
Same way i model it in BMM
D1--> F1 <-- D2--> F2 <--D3
Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
I go Sources>content tab of Fact F1 I set
Dimensions----------- Logical level
D1---------------------- D1 Detail
D2---------------------- D2 Detail
D3---------------------- D3 Total
then, I go Sources>content tab of Fact F2 I set
Dimensions----------- Logical level
D1---------------------- D1 Total
D2---------------------- D2 Detail
D3---------------------- D3 Detail
Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
I need to know whether the way I have modeled it in BMM is right,
Option 2:
I can combine the two facts in a single Logical Fact or the above design should also work.
(F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
what will be the content tab details?
Thanks,
Dev

Many problems with the 'Export to Text' (.txt) in CR Xi

Hi,
I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
- Multi-columns layout do not export as Multi-column (export only a one column);
- Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
- Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
- Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
- 'Keep Group Together' flag is not working.
- 'Reset Page Number After' simply does not works when exported to text;
- 'Keep object together' on TextBox/Section is not working.
- Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
If still supported, when will these bugs be fixed???
Thanks

Hi Rene
Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
Regards
Sourashree

Problem with the hierarchial fields in a Purchase order xml report

Hi,
I am having a problem with the hierarchy problem. We are populating attribute 15 of a PO header. some times it can be null. FYI, we are using 11.5.10 instance where oracle supports direct PO template rather than having a rdf file.
And now in the xml report, if attribute15 of po header is not null then it is fine.
But if attribute15 is null, then the template is picking from the next available attribute15 that is from the po lines. As the line level group of "LINES" is between the "PO_DATA" (header group), hence the template is checking for next available attribute15.
Can any one please suggest how to design the template where we can make the template to check only for that tag at the header level group rather than the line level group tag?
Thank You in advance.
Regards,
Srinivas.

Hi
Incase you want to transfer attachements from SRM to R/3, then you try implementing the BADI in SRM side. The BADI which will help in this case is
BBP_CREATE_PO_BACK BADI.
Please read the standard SAP documentation of this BADI using SE18 Transaction, before making any code changes.
Few Important SAP OSS notes to refer in this case ->
Note 989184 - Transferred shopping cart with internal attachments
Note 550071 - FAQ: EBP - Shopping Cart
Note 916347 - Transfer shopping cart with internal attachments
Note 1001130 - FAQ - Attachment questions (Buyside)
Few useful links ->
http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
Re: Attachments to backend
Re: Document Attachments in Shopping Cart
Re: Attachment in SRM
Re: SRM Documents and Attachments
Re: Limit in Attachments of an item in Shopping Cart
Re: return delivery text from material document is not passed to SUS

Do let me know, incase you face any problems.
Regards
- Atul

Hi, I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to c

Hi,
I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to click the "Smooth clip motion" but the slider is not there for zoom. Any ideas why this is happening all of a sudden? It happens on all clips in this event. The entire event was analyzed after importing.

What program are you using for this editing?
We can ask a Host should move your query over to that forum.

Problem with the item in complaint

Hello everyone,
We are facing a problem with the customizing of item category in CRM,
Our issue is, we are doing a complaint with items, those items have column where we can see the value, description, quantityu2026
Here is our thing we need to have these columns active or deactivate (grey) depending on the product.
We are not sure if it is possible by customizing of item or customizing of material, or we need a development in order to achieve this requirement.
Any help?
Thank you in advance.

Hi,
If you are having products with different item category groups then you can create different item categories for them.
Then depending on the item category you can do the development to grey out the fields.
But if the product have nothing to differentiate then it would be difficult to carry out the development also.
Regards,
PP
Edited by: PePe on Apr 7, 2010 2:08 PM

Problem with a query with a BLOB data type

Hi i've a problem with this query in 11g. R1
SELECT
      LOGTIMESTAMP,
      LOGTIMEMILLIS,
      MSGID,
      XMLTYPE(MESSAGEBODY, nls_charset_id('AL32UTF8')).getClobVal() as LLamada
FROM
    vordel.AUDIT_MESSAGE_PAYLOAD,
    vordel.AUDIT_LOG_POINTS
WHERE
    AUDIT_LOG_POINTS.LOGPOINTSPK = AUDIT_MESSAGE_PAYLOAD.MP_LOGPOINTSPK AND
    LOGTIMESTAMP between TO_TIMESTAMP('03-12-2011 00:00','DD-MM-YYYY HH24:MI') and TO_TIMESTAMP('03-12-2011 12:00','DD-MM-YYYY HH24:MI')
     and filtertype = 'LogMessagePayloadFilter'
and filtername like 'Log Llamada%'MESSAGEBODY: data type of the Column is BLOB
throw this error after execute the query
Error:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00200: could not convert from encoding UTF-8 to UCS2
Error at line 1
ORA-06512: at "SYS.XMLTYPE", line 283
ORA-06512: at line 1

Could you check the BLOB really contains UTF-8 encoded XML?
What's your database character set?The BLOB contains UTF-8 Encoded
and the database where i am connectes have AL32UTF8 character set, but my internal instance have "AMERICAN_AMERICA.WE8ISO8859P1"
that is a problem?
How could I change the character set of the oracle local client to the character set of the remote oracle data base?

Problem In The Query

Hai All,
           I have created a login form in screen painter (which contains two textbox and a login button). When login button is clicked, I want to check whether the username and password matches in the table (@EMPA).
I have a problem while checking with the query
This is User Defined Function a have used
Private Sub UDFCheckInTableLog()
        Try
            Dim rs As SAPbobsCOM.Recordset = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
            rs.DoQuery("SELECT T0.U_user FROM [dbo].[@EMPA] T0 WHERE T0.U_user ='" & euser & "' AND TO.U_pass ='" & epass & "'")
            rscount = rs.RecordCount
            If rscount > 0 Then
                '//There is a record that Matches
                REC = True
                '//To clear the values in the text box
                UDFClear()
            Else
                '//This means NO Record Matches
                REC = False
            End If
        Catch ex As Exception
            SBO_Application.MessageBox("UDFCheckInTableLog :" & ex.Message)
        End Try
    End Sub
I get this error message
UDFCheckInTableLog:
1)[microsoft][ODBC SQL Server Driver][SQL Server] Incorrect syntax near the keyword 'TO'.
2))[microsoft][ODBC SQL Server Driver][SQL Server] Statement(s) could not be prepared.

Hi,
You're trying to use Table Alias(T0), i'm guessing its not allowed. Try also to remove dbo, try @EMPA or just EMPA.
HTH
Manuel

Problem with the query in group by clause

Similar Messages

Maybe you are looking for