Invalid printer error message

hi -- I've developed some Crystal Reports for a client. I work on my own machine, not on their network.
When the client runs the report, they get the message "Invalid printer; the default printer will be used."
I don't recall them having this problem previously, though of course they've never been able to access my printer. Have I inadvertently caused Crystal to remember and expect to find my printer?
Really want to get avoid this behavior. Help?
Thanks,
Carol

Hi Carol,
When a report is designed in Crystal it will default to the printer that is set as the system default. If the report is later opened on a computer that doesn't see that same printer it will prompt with that message you saw and go back to default settings.
To avoid this there are a few more options. Please check them.
First, is to set the report with "No Printer" this will make it look the same on different computers, the downside being when you print you will have to select a printer.
The other option is to have a default printer set up that every user can see so the setting will not change, again the issue with this is that if a user wants.
Hope this helps you!
Regards,
Anindita

Similar Messages

How to print error messages in browser?

When I visit a jsp file in browser, there's some errors in the jsp file, so the browser returns
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
I want the detail error messages, so I can debug my problem. How to print error message in browser or find the message in some log file?

Hi Kanaraja,
Thanks for your answer. I need to get certain information from the list. So, I use LIST_To_ASCII FM. However, may I know the ascii_tab should be type to what? And after this FM, do I have to use another FM to display the ascii list?
data ABAPLIST type ABAPLIST OCCURS 0.
SUBMIT RPCALCU0 VIA SELECTION-SCREEN
with PNPXABKR = 'US'
with PNPTIMRA = 'X'
with PNPPABRP = '10'
with PNPPABRJ = '2003'
with PNPPERNR-LOW = '100750'
with PNPPERNR-LOW = '109202'
with PNPPERNR-LOW = '100255'
with PNPABKRS-LOW = 'US'
with SCHEMA = 'ZUSP'
with RADI_EDT ='X'
with EDT_VARI = 'CUS&SAP_US'
with TST_ON = 'X'
EXPORTING LIST TO MEMORY and RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject       = ABAPLIST
EXCEPTIONS
   NOT_FOUND        = 1
   OTHERS           = 2.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
    list_index         = -1
TABLES
    listasci           = asci_tab
    listobject         = ABAPLIST
EXCEPTIONS
    empty_list         = 1
    list_index_invalid = 2
    OTHERS             = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.

How can I print emails? Printing Error message that no printers are installed. (Printers are installed.)

When I click File > Print, I get a Printing Error message that no printers are installed. Printers are installed. When I click Yes to install a new printer, I receive a new error message that "Windows can't open Add Printer / The local print spooler service is not running. Please restart the spooler or restart the machine." I updated to the new version of Thunderbird 24.6.0. Using Windows 8. I restarted the machine. I confirmed printers are installed using Control Panel. I do not see any way to restart a print spooler. How can I fix this? Thanks.

The print spooler is a windows service and is required to print. I would hazard a guess you can not print with any application.
What I am saying is I think your windows instalation has a problem, not Thunderbird.

I am getting a "printing error" message on my Pixma M432 and a lightening icon at the right

I am getting a "printing error" message on my Pixma M432 and the lightening shaped icon in the triangle beneath the stop button is flashing. My documents won't print and are backed up onscreen on my computer. I have turned it off and on. What is wrong?

solution?

Printer error messages

psc 2170 all in one printer, error message "remove and check cartridge" this has appeared for no obvious reason when I now switch on. I have removed and cleaned contact points on both cartridges and printed to no avail so would be most grateful for any suggestions that might help.
Thank you
This question was solved.
View Solution.

Hi - Did you clean the contacts in the printer (carriage) as well? If not, try that to see if that resolves the problem - Step 5 in this document.
If that doesn't resolve the problem, the next step is to replace the cartridges (one at a time, in case only one of them is bad).
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Printer error message

Printer error message
Printer hp LaserJet CP1525nw
Windows 7
The following message is displayed when sending any file to the above printer.
"hpmns115.dll has stopped working"

Hi jwnova142 ,
Welcome to the HP Forums.
I see that you are having an issue with a Paper Size Error when attempting to print.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with the 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Attempt to access invalid address error message

What does this mean "Attempt to access invalid address" Happens when I try to open PS element 5. I uninstalled and reinstalled my PS element 5 but error message still appears when I try to open the PS sw.

Hi Garry,
Yes, I did download PSE 8 and it did work. However, the trial period has ended. I have uninstalled PSE 8. I have also unistalled PSE 5 and then reloaded it. Upon completeion of the PSE 5 load, I tried to open the PSE 5 and the invalid address error message continues to display. I am very sad that I cant get PSE 5 to work. Can you help with more things I can try? Please let me know
All the best
David

I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

OK, I tried a few things, and I do not understand the results.
1) I opened the document in Preview, and it would only recognize the three initial pages which I typed using the Pages App. It did not recognize the bulk of the text which I copied from Appleworks 6. It also did not recognize any of the scans.
2) I tried opening a pdf in Preview, and it would only recognize the scans. (No Text!)
3) I tried copying everything (select all, and command-c) in Pages, and then opened a blank Pages doc, and typed Command-v. This got me all of the text, but none of the scans!
4) I was worried that my Pages app might be corrupted, but I successfully converted a similar 78-page document with copied materials from Appleworks 6 and similar scans, ant this worked perfectly.
My conclusion is that my file must be corrupted. Is there any way to check this? shabda88

Trying to update to itunes 11.1 getting invalid signature error message

getting invalid signature error message when trying to upgrade itunes 11.1...help me please?

iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Try this - Disable your firewall and anitvirus software temporarily. Then download and install the iOS update.
 Cheers, Tom

Problem updating itunes, keep getting invalid signature error message!!

Trying to update my itunes to latest version, keep getting "itunes has invalid signature" error message, any ideas of how to remedy this?
Many thanks in advance.
Meerkat68

I've had this problem for awhile in Windows XP SP3. Last night, the simplest thing occurred to me...here's what I did (and I'm telling because it worked).
1. Clicked on Start
2. Clicked on Control Panel
3. Chose Add/Remove Programs
4. Found Apple Software Updater and clicked Remove, then responded Yes
5. Went to apple.com and clicked on Support, and then Downloads
6. Downloaded the latest version of Safari ONLY
7. Installed Safari (knowing it would install the latest version of Apple Software Update)
8. AFTER the installation was complete, I clicked again on Start, then All Programs
9. then, clicked on Apple Software Update

Invalid Edit Error Message

Hey guys, i was using final cut pro 4 to edit a movie for our film fest, and out of nowhere, the program is not letting us drag any clips into the timeline, it pops up with a message saying invalid edit. I tried to see if there was anything in the sequence options menu to help out but it crashed everytime i tried to open the options. I updated to FC HD and updated Pro App support, the program now works and i can get into the options menu, but i still get the Invalid Edit error message whenever i try to add a clip to the timeline, im going insane. please help

Hey guys, bit of an update, i am not able to bring any clips into the time line unless i go in and set an in point and an out point for each clip manually before i bring them down. It didnt always used to be like this so if anyone knows how to turn off the setting or otherwise fix what may cause this to happen please let me know.

Envy 5534 on MAC- print error message unable to convert post scrip file

New printer set up fine prints letter but when I want it to print a page with bar code on get error message :-
print error message unable to convert post scrip file
Can any one help please
This question was solved.
View Solution.

Hi @itsalex,
What type of bar code are you printing, and from what program? Just a thought, what if you print the barcode as an image, if you are not already? Try File>Print> Advanced> Print as Image> print.
If the issue persists, let's reset the printing system and repair the disk permissions; doing so may resolve the issue.
Reset Printing System
Click the Apple icon ( ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and add the printer back.
When you add the printer, please ensure you are using the HP driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can select the printer drive. In the screenshot below, you will see Airprint is auto selected, you can change it to the HP driver though.
I look forward to hearing back from you.
Talk to you later alligator
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Invalid year error message

On changing email address . I am getting invalid year error message.
any ideas?

Check your computer system date n time, lower right bottom task bar.

Photosmart 6510 Printer error message 0xc19a0003.

I have a Photosmart 6510 Printer error message 0xc19a0003. I have re-powered the printer but still get the error message Oxc19a0003. Suggestions to fix?
Thanks!

You are correct, gksurgeon, the 5510 does not have a removable printhead. If you followed the steps in the document above, then the printer will need to be replaced.
If you are still in warranty, HP may replace the printer at no cost to you. I'll link the information to get in touch with them below. The link will take you to a form to fill out. Once you fill it out and it is processed, it will give you the printers warranty information, a case number, and the phone number to call.
HP Technical Support Case Call Form:
http://goo.gl/w7Hgh
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Getting print error messages after 8.1.3 update

Adobe Acrobat 8 - Since the 8.1.3 update a couple days ago, I am now getting print error messages in the Adobe PDF printer status box when I send any document to the Adobe PDF printer. The actual printing of the document in Adobe works correctly, but these error messages occur as well - even though the document printed just fine.
I am running Windows Vista Ultimate and did not have the issue prior to the 8.1.3 update.

I have removed PDFMaker from Office, to try to simplify the troubleshooting. All attempts to print end up the same, whether from PDFMaker (before I removed it from Office), from print to Adobe PDF from within an Office app, or using Create a PDF in AP 8.1.3 from an Office file ... the last hourglass comes up in "reading Adobe PDF" and stays up. I can see the "target file" created in WinExpl but greyed out, and the hourglass (busy) never goes away in AP 8.1.3.
In contrast, if I want to create a pdf from a "save as" text file, AP 8.1.3 creates the pdf instantly. Create a pdf from scanner also works fine. This problem is definitely related to updates, since AP 8.1 worked perfectly the last time I used it from Office, which was perhaps 2 months ago.
AP 8.1 suddenly stopped working this week with a "can't create PDF" error message, I updated AP all the way to 8.1.3, and have the problem described above. I don't get an error message now, the create PDF or print to PDF simply never completes.
BTW, both my desktop and notebook run Vista Ultimate 64-bit, both have registered and activated copies of AP 8.1.3, and Office 2007, and both have the exact same problem.
I uninstalled AP 8.1.3 on the desktop, installed the trial version of AP 9.0, and experienced the exact same problem as with AP 8.1.3, the create pdf never completes, but produces no error message.
I print to XPS as a workaround since print to Adobe PDF never completes.

Invalid printer error message

Similar Messages

Maybe you are looking for