Inventory 0IC_C03 Backward caluculation issue

Hi experts,
In Inventory reportm custom query, Kaydate with 365 days offset is used, there data is showing correct with Initialization date and future date. problem is for historical date some time negative and postive values are showing but mot matching with SAP ECC stock on date at MB5B.
here is the example.
Stock initialization on April 10 2009.
for data on feb 01 2007, stock on ECC is 1500
issues - 100 - KG
recepits 2300 KG
when sum of these is 2200 kg, on BI side for 01 2007 for material and plant it is showing - 2200 KG.
but it show as 1500 KG.
*from initialization to date on which query is run, all the receipts and issues sum is showing in report)
is this the behaviour or Bi report will show exactly same qunatity as in ECC for historical date*
Thanks in advance
Edited by: Pavankbi on May 20, 2009 6:32 AM

Raj,
No need to check start routine code for this.
Goto Transformation --> Change mode --> Choose Rule Group (on top of window, middle of the screen) --> Choose 05 --> Dispay mapping --> check routines available or not.
Confirm back are you able to see filed routine or not...!!
Check doc: [Rule Groups in Transformation|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90754b76-bcf1-2a10-3ba7-b299b2be09f2]

Similar Messages

Inventory 0IC_C03 Cube Transformations issue BI 7

Hi Experts,
we are Installing Inventory Cube 0IC_C03, with In dataflow options in BI 7, 2LIS_03_BF transformtions is in Active State, while 2LIS_03_BX transformtion and 2LIS_03_UM transformtions are in Active.
and for most of the Keyfields in Cube are not mapped with infosource fields.
can any body implemented Inventory in BI 7 system, any body faced this issue. can you please share how you resolved this issue.
we are on BI Content 703 11 version.
Regards,
Raj

Raj,
No need to check start routine code for this.
Goto Transformation --> Change mode --> Choose Rule Group (on top of window, middle of the screen) --> Choose 05 --> Dispay mapping --> check routines available or not.
Confirm back are you able to see filed routine or not...!!
Check doc: [Rule Groups in Transformation|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90754b76-bcf1-2a10-3ba7-b299b2be09f2]

Specific Flash Player 10 Backward Compatibility Issue

There's an issue with backward compatibility on Flash Player
10 that is breaking a lot of Flash content that was created with a
tool that I develop and sell. It is to do with the way
globalToLocal and localToGlobal handles NaN.
I've reported it on the bugbase at
https://bugs.adobe.com/jira/browse/FP-964
There are more details here -
http://www.questionwriterblog.com/archives/2008/11/scrollbar_causing_content_to_disappear. html
The impact of the bug can be seen here.
http://www.questionwriter.com/samples/fp10problem/v1perceptions.swf
It is a serious enough backward compatibility issue, and
doubtless affects other content too. I'm hoping for the outcome
that the functionality will be restored in future player releases -
but right now, can someone give me confirmation it is on the Flash
Player team radar?

bump!

Known backwards compatibility issues between Robohelp 9 and Robohelp 8?

Hi Group,
In addition to avoiding the tasks in the Review menu, does anyone know of any other backwards compatibility issues encountered while opening and using files generated in RoboHelp 9 from within Robohelp 8? Thanks, gail

Welcome to the forum.
Simply the fact that RoboHelp 8 will not open a project that has been run in RoboHelp 9. Sure you might well open a project by deleting the CPD and perhaps the XPJ and using the HHP, however I would not recommend that except in an emergency.
What I am not clear on is how you link that to "avoiding the tasks in the Review menu." What has that got to do with the question?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

[svn] 4070: Addressing backwards compatibility issue with states.

Revision: 4070
Author: [email protected]
Date: 2008-11-11 13:13:43 -0800 (Tue, 11 Nov 2008)
Log Message:
Addressing backwards compatibility issue with states.
QE Notes: None
Doc Notes: None
Bugs: SDK-17395
Reviewer: Peter F.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17395
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/Grammar.jj

Revision: 4070
Author: [email protected]
Date: 2008-11-11 13:13:43 -0800 (Tue, 11 Nov 2008)
Log Message:
Addressing backwards compatibility issue with states.
QE Notes: None
Doc Notes: None
Bugs: SDK-17395
Reviewer: Peter F.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17395
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/Grammar.jj

Urgent:Receipt and Issue values in Inventory 0IC_C03

Dear friends,
In standard cube 0IC_C03 keyfigures Valuated stock Qty and value is matching with R/3 Transaction code MB5B.
Receipt quantity and Issue quantity in MB5B is not matching for some of the materials.But it matches with R/3 Tcode MB51 as it have all the movement types.
1.Pls suggest what needs to be done in BW to match the data with MB5B Receipt and Issues?
2.What are the movement types are used in MB5B?.(For ex 321 is displayed in MB51 but not included in the R/3 report MB5B)
Thanks in advance for your help..

Dear Gurus,
Recently we had Implemented the Inventory Management for Retail. Taken downtime and loaded the data by following all the steps. The data is successfully loaded till Nov 2010 to till date. Now when I am comparing the data with R3 using MB51, I am getting the below issues.
We have report in BI, on Material Ledger and we run above query for the duration of 1st Jan 2011 to 31st Jan 2011, This appear to be difference in the output.
BI opening quantity does not match with ECC MB5B opening matches.
1. Few of my BI entries of Movements are not present in R3.
2. Few entries are with no movements present in BI.
3. Some entries of R3 are not present in BI.
Can anyone guide me....

Issue on inventory 0IC_C03 report

Hi All,
I want to design a material movement report.
and the report will contain opening stock, closing stock, end value, 101 movement, 102 movement, 321 and 322 movement.
As I made this on 0IC_C03, with
opening value(0valstock and day interval-1),
closing stock (opening value+ total receipt -total issue),
end value (valuated stock value),
321 movement(issue quantity into quality checking),
322 movement(receipt quantity from quality checking)
But the vale of this report not matching with the standard report MB5B (in R3)
Plz any one inform me how to solve this issue.
with regards,
Balaram
Edited by: Balaramtripathy on Apr 20, 2011 12:51 PM

Hi,
I am also facing similar issue, Let me know How you solved such issue.
Thanks,
Sushant

Inventory 0IC_C03, issue with historical data (data before Stock initializa

Hi Experts,
Inventory Management implementation we followed as bellow.
Initailization data and delta records data is showing correctly with ECC MB5B data, but historical data (2007 and 2008 till date before initialization) data is not showing correctly (stock on ECC side) but showing only difference Qunatity from Stock initialization data to date of Query.
we have done all the initial setting at BF11, Process keys and filed setup table for BX abd BF datasources, we are not using UM datasource.
1 we loaded BX data and compressed request (without tick mark at "No Marker Update)
2. initialization BF data and compressed request (with tick mark at "No Marker Update)
3 for deltas we are comperessing request on daily (without tick mark at "No Marker Update).
is this correct process
in as you mentioned for BX no need to compress ( should not compress BX request ? )
and do we need to compress delta requets ?
we have issue for historial data validation,
here is the example:
we have initilaized on may 5th 2009.
we have loaded BX data from 2007 (historical data)
for data when we see the data on january 1st 2007, on BI side it is showing value in negative sign.
on ECC it is showing different value.
for example ECC Stock on january 1st 2007 : 1500 KG
stock on Initialization may 5th 2009 : 2200 KG
on BI side it is showing as: - 700 KG
2200 - (-700) = 1500 ,
but on BI side it is not showing as 1500 KG.
(it is showing values in negative with refence to initialization stock)
can you please tell, is this the process is correct, or we did worng in data loading.
in validity table (L table) 2 records are there with SID values 0 and -1, is this correct
thanks in advance.
Regards,
Daya Sagar
Edited by: Daya Sagar on May 18, 2009 2:49 PM

Hi Anil,
Thanks for your reply.
1. You have performed the initialization on 15th May 2009.
yes
2. For the data after the stock initialization, I believe that you have either performed a full load from BF data source for the data 16th May 2009 onwards or you have not loaded any data after 15th May 2009.
for BF after stock initialization delta data, this compressed with marker update option unchecked.
If this is the case, then I think you need to
1. Load the data on 15th May (from BF data source) separately.
do you mean BF ( Material movements) 15th May data to be compressed with No Marker Update option unchecked. which we do for BX datasource ?
2. Compress it with the No Marker Update option unchecked.
3. Check the report for data on 1st Jan 2007 after this. If this is correct, then all the history data will also be correct.
After this you can perform a full load till date
here till date means May 15 th not included ?
for the data after stock initialization and then start the delta process. The data after the stock initialization(after 15th May 2009) should also be correct.
can you please clarify these doubts?
Thanks
Edited by: Daya Sagar on May 20, 2009 10:20 AM

Help needed Inventory 0IC_C03

Hi guys,
I am presently working on an inventory project.
I have activated the busines content for the whole process flow i.e the cube 0IC_C03 and its respective datasources and infosources.
Now I want to understand the logic thst is being used in the start and update routines.Is there any doc that gives the logic for these routines.
For example a KF 0ISSVALSCRP which exists in the cube 0IC_C03 is mapped from its infosource using the rulename Issue Qty: Scrap - Purch.Val. from Matl Doc. on Posting Date.
The routine used is 'Perform routine_0030'.
which is
IF ( COMM_STRUCTURE-movetype EQ '551'   "GI scrapping
OR   COMM_STRUCTURE-movetype EQ '552'   "GI scrapping
OR   COMM_STRUCTURE-movetype EQ '553'   "GI scrapping QI
OR   COMM_STRUCTURE-movetype EQ '554'   "GI scrapping QI
OR   COMM_STRUCTURE-movetype EQ '555'   "GI scrapping blocked
OR   COMM_STRUCTURE-movetype EQ '556' ) "GI scrapping blocked
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
AND COMM_STRUCTURE-cppvlc <> 0 .
Could somebody tell me the logic implemented in this piece of code.Is there any document for the same.
Points will be assigned.
Thanks
Ankit

Hi guys,
I am presently working on an inventory project.
I have activated the busines content for the whole process flow i.e the cube 0IC_C03 and its respective datasources and infosources.
Now I want to understand the logic thst is being used in the start and update routines.Is there any doc that gives the logic for these routines.
For example a KF 0ISSVALSCRP which exists in the cube 0IC_C03 is mapped from its infosource using the rulename Issue Qty: Scrap - Purch.Val. from Matl Doc. on Posting Date.
The routine used is 'Perform routine_0030'.
which is
IF ( COMM_STRUCTURE-movetype EQ '551'   "GI scrapping
OR   COMM_STRUCTURE-movetype EQ '552'   "GI scrapping
OR   COMM_STRUCTURE-movetype EQ '553'   "GI scrapping QI
OR   COMM_STRUCTURE-movetype EQ '554'   "GI scrapping QI
OR   COMM_STRUCTURE-movetype EQ '555'   "GI scrapping blocked
OR   COMM_STRUCTURE-movetype EQ '556' ) "GI scrapping blocked
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
AND COMM_STRUCTURE-cppvlc <> 0 .
Could somebody tell me the logic implemented in this piece of code.Is there any document for the same.
Points will be assigned.
Thanks
Ankit

Material blocked due to a physical inventory - VL02N - Post Goods Issue

Hi,
We are working with SAP R/3 4.6C IDES.
During a business process we need to run VL02N and to click the Post Goods Issue button.
When we do that, we are getting the following error:
"Material P-103 1000 0001 blocked due to a physical inventory"
Anyone knows that I need to do in order to make it work?!
Also, anyone knows how can I add more quantity to a given part?
Thank you!
Yaniv

Hi Yaniv!
Any stock changes are forbidden during physical inventory (otherwise you wouldn't know, if your counting has amount of before or after the change).
Close the counting (-> ask who has done this), then goods issue is possible.
Quantity change: go to picking tab and enter 'real' -> changed quantity.
Regards,
Christian

Backward Scheduling Issue

Hi,
I have an issue when SAP performs backward scheduling to get the production order finish dates.
As an example, if the Basic finish date is Tuesday 01/27/2009 (00:00) then when SAP performs backward scheduling it comes up with the following dates & Times:
Basic Start Date - 01/22/2009
Basic Start Time - 00:00
Scheduled Finish Date - 01/26/2008
Scheduled Finish Time - 24:00
Scheduled Start Date - 01/22/2008
Scheduled Start Time - 13:17
If the Basic finish date is Monday 01/26/2009 (00:00) then when SAP performs backward scheduling it comes up with the following dates & Times:
Basic Start Date - 01/21/2009
Basic Start Time - 00:00
Scheduled Finish Date - 01/26/2008 instead of 01/19/2008
Scheduled Finish Time - 00:00   instead of 24:00
Scheduled Start Date - 01/21/2008
Scheduled Start Time - 13:17
Could someone please explain as to why this is happening?
Thanks,
JP

Sorry about that. All the dates are in 2009. Here is the updated information
Case 1:
Basic finish date is Tuesday 01/27/2009 (00:00)
Basic Start Date - 01/22/2009
Basic Start Time - 00:00
Scheduled Finish Date - 01/26/2009
Scheduled Finish Time - 24:00
Scheduled Start Date - 01/22/2009
Scheduled Start Time - 13:17
Case 2:
Basic finish date is Monday 01/26/2009 (00:00)
Basic Start Date - 01/21/2009
Basic Start Time - 00:00
Scheduled Finish Date - 01/26/2009     instead of 01/19/2009
Scheduled Finish Time - 00:00             instead of 24:00
Scheduled Start Date - 01/21/2009
Scheduled Start Time - 13:17
Saturday & Sunday are holidays. I have checked the calendar and it is not the issue. I would appreciate it if you could help me in this as this problem is driving me crazy
Thanks,
JP

Deleting data from Inventory 0IC_C03

How do we delete the data from 0IC_c03?

Hi,
please describe your requirement with more detail
- you can delete the whole data in the cube
- selectively delete data with a characteristic filter (all except time chars)
- if you want to delete with time char selective then refer to this thread
Selective Deletion on Inventory Cube 0IC_C03 via Calendar Day
hope this helps...
Olivier

BW on HANA - Inventory Cube Optimized Cube issue

Hi All,
We have an inventory cube which works perfectly fine and we created a HANA optimized copy of the same cube. We sourced the Initialization from the original (non-HANA) cube, loaded data, and then we loaded the rest of the data from the corresponding DSOs (one for 2LIS_03_BF and one for 2LIS_03_UM).
In order to reconcile them, I opened both of them in BEx Analyzer. The original works perfectly fine, however the HANA optimized one, give me a error when entering the Fiscal Variant:
Error in BW: Time is not consistent.
Error reading the data of InfoProvider
Error while reading data; navigation is possible
I checked in RSDV and the validity dates are fine. When I check in RSRV I get the following errors when running "Test the partitioning column for InfoCube" and the "Consistency of time dimension for InfoCube". The return issues. If I try to repair the issues, I get the same error message.
An exception with the type CX_SY_DYNAMIC_OSQL_SEMA
Message no. RSRV000
Any clues?

Hi Busy waiting,
Please see if the following notes help you to solve the issue :
1999013 - RSRV - Initial key Figure Units in Fact Tables test results in exception
1953650 - RSRV - Fact tables and dimension tables of InfoCube results in exception error
BR

Software Inventory - File Types Question / Issue

Hello,
I am having an issue at my site that I hope someone can help me out with. Basically, my office is currently undergoing a software audit and they have something connected to my SCCM 2012 SP1 environment that is reading software inventory. To save
the boring details, they told me that I needed to go into the Software Inventory and under the file types, add *.exe with all other settings as default.
My manager did not want to turn this on for the entire company immediately so he asked that I target the IT department for this change during the afternoon. So I created a new policy with only Software Inventory withthe settings that the auditor told
me to put and scheduled it to run daily at 2:00 PM with start date of today. I then deployed this to a preexisting Collection that had all IT computers in it. I completed this task by 11:00 AM, figuring that has given me plenty of time to allow
for the policy to filter down. I forced a Machine Policy refresh on a few machines.
So at about 2:30 PM, I checked my InventoryAgent.log and nothing. It doesn't appear to have run at all. I began to do some research and found that I had to turn on a series of items in Asset Intelligence > Edit Inventory Class, which I did.
I then refreshed my policies manually and then triggered the Software Inventory manually. I watched the log again and got this
Inventory: *********************** Start of message processing. ***********************
InventoryAgent 7/16/2014 2:42:41 PM
6376 (0x18E8)
Inventory: Message type is InventoryAction InventoryAgent
7/16/2014 2:42:41 PM 6376 (0x18E8)
Inventory: Temp directory = C:\Windows\CCM\Inventory\Temp\
InventoryAgent 7/16/2014 2:42:41 PM
6376 (0x18E8)
Inventory: Clearing old collected files. InventoryAgent
7/16/2014 2:42:41 PM 6376 (0x18E8)
Inventory: Opening store for action {00000000-0000-0000-0000-000000000002} ...
InventoryAgent 7/16/2014 2:42:41 PM
6376 (0x18E8)
InventoryVersionNumber for '{00000000-0000-0000-0000-000000000002}' not found.
InventoryAgent 7/16/2014 2:42:41 PM
6376 (0x18E8)
CInvState::VerifyInventoryVersionNumber: Couldn't get version number for '{00000000-0000-0000-0000-000000000002}': 80070490
InventoryAgent 7/16/2014 2:42:41 PM
6376 (0x18E8)
Inventory: Delta report without a previous Full report; will do a Full report.
InventoryAgent 7/16/2014 2:42:41 PM
6376 (0x18E8)
Inventory: Action=Software, ReportType=Full, MajorVersion=1, MinorVersion=0
InventoryAgent 7/16/2014 2:42:41 PM
6376 (0x18E8)
Inventory: Initialization completed in 0.344 seconds
InventoryAgent 7/16/2014 2:42:41 PM
6376 (0x18E8)
After almost 20 minutes and no change, I attempted to start the Software Inventory again manually and got this.
Inventory: Message [Type=InventoryAction, ActionID={00000000-0000-0000-0000-000000000002}, Report=Delta] already in queue. Message ignored.
InventoryAgent 7/16/2014 2:59:47 PM
1032 (0x0408)
No change in about an hour since then.
Did I do something wrong? Is there something that I am missing? Any assistance would be helpful.
Thank you in advance.

I began to do some research and found that I had to turn on a series of items in Asset Intelligence > Edit Inventory Class, which I did.
Software Inventory and Asset intelligence (hardware inv.) are unrelated. Just be patient - it might take some time.
Torsten Meringer | http://www.mssccmfaq.de

Physical inventory and Document posting issue

hi .,
The PI document was printed out and was to contain 3 different materials. But the PI document showed only Sl.No.3. Sl.No.1 and Sl.No.2 were not displayed.
When we go to MI03, all the there items are displayed in the PID No.xxx1234.
Sl.No.2 and Sl.No.3 are shown as COUNTED and ADJUSTED and Sl.No.3 has a status as NOT COUNTED.
The Planned Count date on the PID No.xxx1234 is 07/18/2006
When we try to do a PI Count using MI04 for Sl.No.3 giving the PID No.xxx1234 leaving the year blank, the following <b>messages.,
" Please reconcile count date w.planned phy.invent date 07/18/2006 " with message number M7 730 as a warning.
After the warning message ,we get the next warning message " Document posting in different periods" and finally next we get an ERROR message with the text " A COUNT CAN ONLY BE ENTERED FOR PERIOD 06/2007</b>.
<b>We are on 4.6C with SP51. FY starts Feb. Our Current Period of control record is now 03/08</b>
Has anyone come across similar errors and if yes, what was the action action.
Is there a SAP Note to recitify this error or do we have to open a session with OSS to generate a specific solution for this error.
All help is much appreciated.
Thanks

Hi All,
The way I see this issue it's actually a lock. By that I mean, there's an open PID which can't be posted because it belongs to the previous period which is locked. Also a new PID can't be created because of this open PID.
Hence I suggested to go to MI02 and delete that particular line item. This deletion would not affect the other line items in the same PID. (Tip : There's a deletion indicator in front of the line item can be selected to delete a line item of the PID).
Then create a new PID. As far as the status of the inventory in 2006 is concerned it would be not counted.
Pl. opine.
Thanx,
Pravin

Inventory 0IC_C03 Backward caluculation issue

Similar Messages

Maybe you are looking for