Inventory Management Queries

As of BI 3.2, does anyone know which infoprovider provides these queries as they are not part of 0IC_C03, Material Stocks/movement?
1.     Q0002 – Inventory Days of Supply - Quantity
2.     Q0003 – Inventory Days of Supply - Value
3.     Q0004 – Finished Goods Inventory Days of Supply - Quantity
4.     Q0005- Finished Goods Inventory Days of Supply - Value
5.     Q0012 – Material Consumption

Hi Eric,
you are right !
0IC_01 is obsolete because feeded by the old LIS datasources....so, you have to use the new cube with the new datasources from LBWE...the problem is that your queries still remain (on business content standard level) dependent from the old cube with no copy-query for the new one !!! And, in addition, you have no possibility to copy the queries from the std tool because the cubes are completely different !!!
If you want, you can use the workarounds mentioned in a previous thread on the BW forums (how can I copy query and bla bla bla..).
That's all is in my knowledge (strange situation, my dear..)
Bye,
Roberto

Similar Messages

  • Non-cumulative Values not showing in Inventory Management Queries

    Hi:
    Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
    I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

    Found the problem.  It had to do with the compression variant in the delta process chain.  The compression was set to 'no marker update'.  Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up.  Reinitalized and the deltas are working correctly now.

  • Inventory management: Validy dates in queries???

    Hi experts,
    We have BW 7.0.
    I have loaded data on 04.03.2010 with BF- and UM-datasources and compressed it correctly.
    When I now look into the validy table for plant 0001 there is a validy range from 03.07.1997 to 08.02.2010.
    But when I start a query for 09.02.2010 system says "no data found".
    The document "How To Handle Inventory Management Scenarios in BW" says that I should show the result in parenthesis!
    What is up here?
    But I don't want to update this validy table!!!
    Pls help!
    KR,
    Raimund
    Text in  document:
    ...For example, if data with document data was loaded into the
    InfoCube with values from 01.01.2002 to 15.02.2002 (assigned to the respective time
    characteristic), the validity interval is also determined by these two date values. You can
    extend the intervals by maintaining the table (transaction RSDV). Stock balances are
    displayed for requests that relate to this period. If you start a query that requests the
    stock balance for 16.02.2002 or later, the result is displayed in parenthesis (a blank
    value is displayed in BW 2.0B and 2.1C), since it lies outside the validity area (providing
    that the validity table was not manually extended using transaction RSDV)....

    Hi,
    Hi,
    Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
    Use :
    0VALSTCKVAL   " for Value
    0VALSTCKQTY   " for Qty
    0CALMONTH        " for Month
    Use the above combinations in New Selections in columns and go it.
    For Qty Opening:
    New Selection bad drag abd drop following things
    0VALSTCKQTY   " for Qty
    0CALMONTH        " for Month and restrict with less then or equalto option variable (single value, user input)  and set the offeset
                                   value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
    For Qty Closing:
    New Selection bad drag abd drop following things
    0VALSTCKQTY   " for Qty
    0CALMONTH        " for Month and restrict with less then or equalto option variable (single value, user input) .
    In the same way build for Value and other Keyfigures on 0IC_C03.
    And
    Drag & drop
    0MATERAIL
    0PLANT  " Give some Input Variable.
    See the steps.
    Treatment of historical full loads with Inventory cube
    Setting up material movement/inventory with limit locking time
    If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
    See this thread related to Inventory.
    Re: Inventory Mangement steps - questions
    Thanks
    Reddy
    Thanks
    Reddy

  • Inventory Management Cube 0ic_c03, 0StockType

    In the Inventory Management Cube 0ic_c03 queries,I've found that  0StockType has descriptions that are misleading because of the way they are written in domain bstaus (R3 side), especially when seeing the key and SHORT description (truncated beyond meaning).
    OK I can correct these by changing BStaus 's texts.
    The main changes I'd do are for the Customer Consigment, Customer Return Packaging and Material Provided to Vendor descriptions.
    But what does 0StockType 'blank' (or #) mean ?
    (It seems to mean something like Valuated Stock Valuation and 'Not Defined' is not very good in a Query result)

    Well, no one replied, but I got feedback from OSS.  So just in case anyone is interested.....
    I had to use r3 > se11 to change the domain descriptions myself.
    Bstaus 'blank' I put as 'Valuation'
    I also improved some of the Bsttyp descriptions whilst there

  • Inventory management

    Hi,
    In Inventory management ...for reports i am using standard queries taken from metadata repository but i am not using the standard cube instead using a custom cube and copied all those queries on to custom cube...since for all figures routines have been written in update rules...
    please tell me wheather i need to test them with R/3 to know whether data flow or data entries are right or no...
    if i have to test from BW to R/3 then i need to test them in Standard reports of R/3 not using RSA3 becoz the values of key figures are calculated during runtime and i dnt get them in RSA3 m i right?
    please suggest me where i can search the standard reports in R/3...which transactions i need to use...
    e.g.Receipt quantity :Blocked stock(0RECBLOSTC)
    WHERE can i get the values for this in R/3?
    thanks in advance,
    Vijaya

    Hi,
    The information on "how to validate" given in the note 586163:
    <i>TAC MB5B <-> Queries 0IC_C03_Q???
    (Stocks/movements R/3 <-> BW)
    TACs MC.? <-> Queries 0IC_C03_Q???
    (Inventory controlling LIS <-> BW)
    Reports MBQUANT and RM07MMFI
    (verification of the R/3 data)
    Notes 739863 and 745788 provide additional information in this regard, as well as the options that exist to clean up data in BW.
    Note 766622 provides you with the option
    of creating a LOG file for the extraction.</i>
    With rgds,
    Anil Kumar Sharma .P

  • Inventory Management : Total stock turnover

    Hello,
           Can anyone tell me the logic for calculating Total Stock turnover & the Average quantity of total stock in an Inventory Management scenario.
    Thanks & Regards
    Indraneel

    Hi
    1. Warehouse Inventory Turnover of Total Stock  Specifies how often average total stock has been consumed. (Total consumption quantity / Total stock- average quantity)
    2. Average Total Stock Warehouse Inventory Turnover Specifies how often average total stock has been consumed based upon the average total usage. (Average total consumption quantity / Total stock u2013 average quantity)
    refer this if u still have queries
    http://help.sap.com/saphelp_nw04/helpdata/en/06/8c6cfe0e67fd43a6cd3603d246ced7/frameset.htm
    hope it helps

  • Inventory Management - 0IC_C03 InfoCube Partitioning (Recommendations)

    Hello Everyone,
    I have gone through most of the postings available on SDN and other white papers related to Inventory management implementation.
    I did not get enough information and most of the information has given me both yes and no answers for partioning of the InfoCube.
    I am looking for,
    Can you please recommend what is the best practice for Physical and logical partitioning of 0IC_C03 InfoCube.
    We have Calendar Day, Calendar Month, Calendar year in time characteristics and plant as the validity characteristic.
    I have gone through couple of white papers which recommend avoid using the time characteristics for partitioning and rather use plant or territory grouping as applicable.
    But some forum postings I have gone through mention that the partitioning has been done on time characteristics.
    What is the impact of marker update and the paritioning being done on the time characteristics.
    So, can you please let me know what the best practice would be and the reason for partitioning in the way whichever you recommend.
    I really appreciate your input.
    Thanks
    Dharma.

    Hello Naveen,
    Thanks for the prompt response.
    I understand that the partitioning by time characteristics is not useful because of how the data is accessed.
    When I mentioned that the partitioning is considered on Plant or Territory.
    I mean to use the logical partitioning where I am thinking of loading in my data based on the territory field which would then be grouped into regions.
    In this case it can be Region 1, Region 2 and Region 3
    Where
    Region 1 --> Data from Territories 1,2,3
    Region 2 --> Data from Territories 4,5,6
    Region 3 --> Data from Territories 7,8,9
    Once this has been done, I am planning of implementing the entries in RRKMULTIPROVHINT table to accordingly split the queries from Multiprovider.
    The reason being most of the reporting is done at the territory level which in turn would help re-route the queries to appropriate part provider.
    I am more worried about the physical partitioning for an InfoCube in order to have good database breakdown.
    Thanks
    Dharma.

  • Combined Report for Purchasing and Inventory Management.

    Hi All,
    Is there any standard SAP Report available where I can get all the information related to Purchasing and Inventory Management in one.
    Like Material,Purchasing details of the material (vendor, price etc ) and Inventory Management (Stock qty and value etc.).
    Regards,
    kumar

    I don't know any. We have one Z or if you want you can make a simple query.
    Best regards.

  • Inventory management for Equipment

    Hello Experts,
    One of our client is currently using SAP-ERP system. They are having sensitive equipment for their safety purpose to all the gate securities. Now they are using Third party tool for their application. The current system is not reliable for tracking the material flow, equipment tracking, and online inspection for the equipment. Currently they are having 40posts (Gates).Different type of equipment is located in all the posts based on its range.
    Equipment issue, Retrieve equipment,conumption posting,scrap accounting also maintain in MM
    So they want to automate this process in SAP system  which includes all the Employee details (Security),Medical Fitnessu2026u2026u2026for ease tracking of the equipment ,status of the equipment, employee equipment training, online-inspection and security shift change details.
    How to map this scenario in MM?Awaiting for your valuable reply.
    Regards,
    Rajkumar.A

    Hello,
    Currently they are havingSAP-HR.But i want to integrate HR with inventory management(Like issue,receipt,scrap,consumption)

  • Inventory Management for Airlines Industry

    Does Oracle offir a solution that allows an airlines to manage its inventory? I have a customer who has heard and read that Oracle's Inventory Management module will work with the special requirements of the airline industry. Is this true?

    Hello,
    Currently they are havingSAP-HR.But i want to integrate HR with inventory management(Like issue,receipt,scrap,consumption)

  • Inventory Management and WBS?

    Hi there,
    We want to show an inventory management report which contains WBS Hierarchy. It shall look like the following style:
    Dimension&#12288;&#12288;&#12288;&#12288;&#12288;Fact Stock Value
    FKSTL
    ->PROJECT
    &#12288;->WBS
    &#12288;&#12288;->MATNR&#12288;&#12288;&#12288;&#12288;xxx,xxx,xxx
    I have activate two InfoCubes, 0IC_C03 and 0PS_C04. What can I do to show the report like that?
    Thanks in advance

    Hi
    Have you uploaded the hierarchy for FKTSL and include this infoobject in your cube......you can execute the report to drilldown based on the hierarchy
    Hope this helps
    Cheers
    N Ganesh

  • The interface connecting Lean-WM and inventory management

    Dear experts!
    Thank you for your attention!
    I am confused at the interface connecting Lean-WM and inventory management.
    there are so many concepts in this field, such storage location, picking areas, storage types and so on.
    Could you please give me an real case or a illustration to discribe that how the interface connecting Lean-WM and inventory management works?
    Best regard!
    Tangdark

    you do nto need to enter serial numbers while clearing inventory at WM level but at IM in case you have the serial profile activated then you need to enter serial numbers when clearing inventory from the IM level.
    according to what you have said it should automatically pop up a screen where you need o enter the serial numbers but this is weird it is not doing.
    Please check the following:-
    Does the serial number profile config in OIS2 have "MMSL" as a property and if so is entry of serial numbers mandatory during goods receipt and issue ad if there is a stock check active

  • Will MIM (Merchandize and inventory management) work with SAP AFS / SAP POS

    We are implementing SAP AFS ERP at the head office and SAP POS at the retail stores.
    We want to implement the MIM module for inventory management at retail store level. Does MIM work in conjunction with SAP AFS. A consultant was suggesting that MIM works only with SAP Retail and no other vertical SAP solution.
    Can someone please clarify?
    Regards
    paddy

    MIM is linked to IS Retail, not to AFS.
    Nevertheless, you can always link and AFS and a Retail system.  SAP provides a very convincing ALE scheme for this.
    Eric

  • Analysis Process Designer and Inventory Management

    In the How to guide for Inventory Management it mentions that you can you can intialise stock in the Snap shot Cube using the Analysis Process Designer (APD).  Has anyone done this and if so can you explain how or outline some steps? Thanks

    Hallo,
    the APD does`nt be a useful tool for modeling a performant 
    data flow. A lot of SAP BW user think so.
    The performance problems are given by the ddic intern table, using to uploading the extracted data into the apd used wa_table and structures.
    To have the best performance on your scenario, please use the following scenario as possible.
    Step 1.
    upload the extracted data from the psa into a data layer
    there you can reduce and harmonize the data by using a transactional ods
    Step 2.
    build a infoset that joins the data
    Step 3.
    build one query to reducing data and make two copies of ist
    Step 4.
    build a useful data mining model
    Step 5.
    upload the results of the data mining model into a transactional ods
    Step 6.
    link the uploaded data into a infoset ore write back into a standard ods
    Step 7.
    query the data
    If you use this scenario you have a lot of benefits. Better performance, better quality of persistent data and actual and traininged data.
    The recommend next step (if you want a alerting) is to build a reporting agent report - if you have usefull processes in  the query.
    There are a workshop for Data mining and APD, named BW380.
    I hope I helped you.
    Otherwise give me a message.
    [email protected]

  • POS and inventory management suggestions?

    I own and operate a gift shop and wanted to use my iPad, iPhone, and MacBook Pro to ease the burden of inventory management.  Any suggestions for a POS system that would help manage what comes in and out of the shop?

    Check out NCR Silver.  App based POS with back office that tracks inventory levels in real-time.  Have visibility to quantity on hand, know how many days of supply are remaining based on past sales history. 
    I may receive some form of compensation, financial or otherwise, from my recommendation or link. 
    <Edited by Host>

Maybe you are looking for

  • A very very very simple question

    Hi guys, I have a very simple question and standard but I cant find anywhere... I have two dateTime variables, i need to calculate difference between this dates in days, thats it. I tried all functions and tried without success a Java Embed task but

  • MainStage 3 Wham pedal off key?

    Hi - so I just upgraded to MainStage 3, and I'm very excited to see "Wham" as a pedal option. It seems to be based on the DigiTech Whammy pedal, which is the ONLY physical pedal I use with MS. However, I'm thinking it might be one half-step off. I us

  • I accidentally deleted Dictionary and can't find my install CD?

    I accidentally deleted Dictionary (and TextEdit, but I don't really use that one). ((And yes I emptied the trashcan)) I thought they were just shortcuts, but I guess not. And now I can't use the three-finger tap to look things up. Is there any way to

  • Multiple selection and lead selection

    I have now multiple selection in my application via selectin mode 8. but i also want that the app reacts when i make one selection. the lead_selection argument does not work anymore with mode 8. Anyone nows how to manage that?

  • Looping movie clip stops in middle

    I am using a movie clip as part of a game. It's a clip of a spaceman walking. When the game is being played, the movie seems to loop one time (the spaceman walks one cycle), and on the second time around the animation seems to stop right in the middl