Inventory Management : Total stock turnover

Hello,
       Can anyone tell me the logic for calculating Total Stock turnover & the Average quantity of total stock in an Inventory Management scenario.
Thanks & Regards
Indraneel

Hi
1. Warehouse Inventory Turnover of Total Stock  Specifies how often average total stock has been consumed. (Total consumption quantity / Total stock- average quantity)
2. Average Total Stock Warehouse Inventory Turnover Specifies how often average total stock has been consumed based upon the average total usage. (Average total consumption quantity / Total stock u2013 average quantity)
refer this if u still have queries
http://help.sap.com/saphelp_nw04/helpdata/en/06/8c6cfe0e67fd43a6cd3603d246ced7/frameset.htm
hope it helps

Similar Messages

  • Inventory Management: Blocked stock coming up in OnHand

    Hello Experts -
    We've implemented 2LIS_03_BF for our inventory management reports.
    However, the OnHand quantity is also picking up Blocked quantity. I used the same code as given by SAP.
    For a material, the OnHand quantity is 13 in our reports when there's nothing under Unrestricted in MMBE. But there are 13 under Blocked.
    I looked at the code and the way the code is, it would pick up the Blocked quantity also.
    How do I resolve this issue?
    Thanks,
    Syed

    Hi,
    Which key figure are you using to get Stock on Hand?
    To get stock on hand we have to use 0TOTALSTCK - Quantity Total Stock and 0BLOCKEDSTK is for blocked stock
    These 2 are non-cumulative key figure.In update rules logic will be differentiated based on Stock type and stock category. For Blocked stock , stock type should be 'D' and stock category NA 'KR'.
    Please check update rules of BF.
    hope it helps...
    regards,
    Raju

  • Inventory Management: Valuated Stock Value

    Hello Experts -
    We're using inventory management. We're just bringing in 2lis_03_bf which is the material movements and the standard price datasource.
    The plant valuated stock quantity and the valuated stock value are fine. The SLOC valuated stock quantity is fine. We're using the non-cumulative key figures for the valuated stock quantity and the valuated stock value. The SLOC valuated stock value isn't correct. So I just created a calculated key figure where I'm multiplying the quantity with the standard price.
    This works fine but when I look at the plant level and use this CKF, the aggregation threw me off. So I changed the aggregation on CKF at the Bex level.
    This works fine in dev and qa where I don't have too much of data. But as soon as I'm in in production, the query times out and gives me an error saying I reached the buffer limit.
    I was thinking of calculating the valuated stock value at the ETL layer but now I'm thinking that if I do that and the price of a material changes, I'll again have the same problem. I can't re-load every time a material price changes.
    Can someone please help me with this scenario?
    Thanks!
    Edited by: Siegfried Szameitat on Oct 29, 2008 9:30 AM
    do not offer points, it is against the rules

    Hi Syed,
    Deriving values by multipling with price also not correct. results will not match with R/3.
    Value Calculation
    In principle, values are updated with Plant, Material, and Stock Category only. Quantities are updated with these characteristics, as well as with Storage Location, Batch Number, and Stock Characteristic
    Check SAP Note 589024: Evaluations in BW with the Characteristics Storage Location and Stck Char.).
    Hope it Helps
    Srini
    Edited by: Siegfried Szameitat on Oct 28, 2008 4:17 PM

  • Inventory Management _Total Stock is not showing

    Dear Expert,
    This is new Inventory development I have extracted the data from BX to 0CI_C03 and compressed the request without No marker check,
    And then loaded the BF with Initialization (without data transfer) and updated request with No marker check,
    I could find out the Receipt quantity values and issue quantity as 0(very less in Dev), Problem here-
    Total stock showing blank no values.
    Please suggest
    Many thanks in advance.
    Regards,

    Hi Kavitha,
    Please review the document Re-initialization of the Material Stocks/Movements cube (0IC_C03) with 2LIS_03_BF, 2LIS_03_BX and 2LIS_03_UM in BW 7.x. It contains a step-by-step guide incl. useful explanation and background information.
    Best regards,
    Sander

  • Inventory - Quantity Total Stock

    Hello Experts,
    We recently loaded the data to 0IC_C03 using 2LIS_03_BF, 2LIS_03_UM. Quantity total stock, amounts are not matching between MCBA transaction and BI cube. Please let me know how can we proceed.
    Regards,
    Jyoti

    Hi,
    Step by Step Loading Data to Inventory Cube , Please verify your steps here,
    1. Ensure Cube contents are deleted 
    2. In R/3 go to T- code LBWG and delete contents of set-up table. Choose the correct application area 03 
    3. Ensure all other users except self and ALEREMOTE or BW RFC users are locked out. ( you need an outage time in R/3 when you are loading data from R/3) 
    4. Run T-Code MCNB to set - up stocks. DataSource 2LIS_03_BX, all materials including non-valuated stock 
    5. Load the set - up table with history data if needed. 
    - T-Code OLI1BW for Material Movements 
    - T-Code OLIZBW for Revaluations 
    6. From BW load initialisation for 2LIS_03_BX to set the initial stock. Compress this load with a marker update 
    7. Run an initialisation without data transfer from BW for DataSource 2LIS_03_BF and 2LIS_03_UM 
    8. Load the historical data as full updates for 2LIS_03_BF and 2LIS_03_UM into the cube. Compress these two loads without a marker update. 
    9. Make sure that, Job control has already been set - up in R/3. 
    Hope this helps
    Sukhi

  • Inventory Management - QM Stock

    Hi Gurus
    Have Few clarifications:-
    1) Doing the physical inventory for QM stock is advisable /mandatory (common business Impact)? if not explanation please...
    2) Generally Physical Inventory document does contain the single line .....how to accomadate in the same report if any withdrawls been made by lot wise.
    Appreciated your advise
    Rgds
    RG

    Hello RG,
    Generally we carry out physical inventory for auditing purposes. Also with help of physical inventory we can track balance in goods issue and goods reciept in am particular storage location / (storage type (in WM mamanged applications))
    It is recommended that physical inventory is carried out for unrestricted stock, because quality inspection stock can only be issued for sampling. We cannot issue quality inspection stock directly , indeed it needs to be first transfered to unrestricted stock for godds issue.
    General process hwich we follow for physical inventory is we create physical inventory document and then we do physical inventory count and then post the diffrences if any. (Recountingg is also applicable if differences are considerable)
    Now on point No. 2
    We can use posting block indicator while creating physical inventory document, which will restrict goods movement during physical inventory process.
    Posting block indicator is located in the HEADER of MI01 T-Code.
    The other method to carry out physical inventory is by FREEZE BOOK INVENTORY.
    With this goods movement are allowed during physical inventory process, but your book inventory (SAP) will not change.
    Br,
    Tushar

  • Inventory management opening stock querry

    Hi,
    In the material movement report, it needs Opening stock, closing stock and the End Value.
    Can you please guide how I could Calculate.
    Though I calculate it by valuated stock and -1  day interval, but not getting proper value.
    Iz that necessery to append the field LABST(opening stock) and LBKUM (end Value),
    then remodeling the inventory cube 0ic_c03.
    So what will be the cmod include progame for that?
    regards,
    Balaram

    HI balaram,
    for enhancing the datasource refer the below How to - doc
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0eade6c-692a-2c10-ac86-80f6b2157791?QuickLink=index&overridelayout=true
    I have a note from the forums on the opening and Closing balance , may be you can give a try
    0VALSTCKQTY gives  Closing Balance.
    0VALSTCKQTY + Issues - Receipts = Opening Balance
    Regards,
    Sathya

  • Inventory Management, process stock in Quality.

    Hi,
    I am working in WM making the inventory process however I receipt an error when I trying to execute the LI20. The transaction gives this error:
    LI20:  No destination storage bin to be found in storage type 999
    This error appear when there are a material in quality stock. After release the sock by QA11, it is possible to make the movement to storage type 999. My question is if is it possible to make the inventory for stock in quality. I think it is not possible to move the stock when it is in Quality.
    Thank you and best regards.

    Hi,
    Thank you for the replay.
    I have already created the interim storage type 999, In fact the process works correctly after make the usage decision by QA11. My question is if it is possible make movements in WM for inventory like this when one of the materials in the storage type is in quality stock. Always give this error.
    Thank you and best regards.

  • Inventory:Transaction in ECC for displaying Total Stock and Stock value

    Hello Experts,
    I have ran the report on BW side which gives me Inventory's Total Stock (ZTOTALST) & Stock Value(ZSTDPRICE) period wise.
    I want to reconsile data between ECC & BW for these two fields, please provide me trasactions for the same.
    I have material num & Plant for input.
    I want  to see the ZTOTALST & ZSTDPRICE value period wise in ECC.
    Thanks in Advance.
    Regards,
    Yash.

    Hi,
    Check in MB5B and MC.9 Tcodes in ECC.
    Note: select Valuated Stock in ECC and gibe Date Ranges also
    Thanks
    Reddy

  • Manage stock qty. in Storage bin for Inventory management

    HI all,
    We are implemented Inventory Management (display stock of material for storage location).
    I want to know is there any method in Inventory Managment to Manage stock of specific material in bin also.
    Means User exactly should know the stock of specific material is located in Storage Bin.
    Please suggest me the hole process or any customization
    Regards,
    Vraj

    Hi V raj,
    I don't know whether i understood your question well. But i will answer in the way i understood.
    To serve your requirement you need to have a Warehouse management, means to have a smooth warehouse bin wise storage.
    But some companies are not willing to implement WM and they are finding a way with batch classification. They maintain batches for material and storage bin are maintain in a batch classification. So you can view it in MMBE also by going into the batch classification of the relevant batch.
    And if you want to have a detail report you can develop a simple report or a query to retrieve batch classification data.
    For batch classification activation:
    1. Material must maintain "Batch management" tick in Purchasing and storage plant data views
    2. Create a seperate class for this using CL02
    3  Create batch characteristic using CT04 (this is to maintain Storage Bin)
    4. Add classification view to each material and the relevant batch class.
    5. When you are doing the GR use "Batch" tab and "Classification" button to maintain relevant Storage bin data. (To update mass scale you can create a "Z" report getting help of a developer in your company)
    6. Now each batch you are maintained your storage bin view it trough MMBE (But only one batch classification) or in-house developed report ("Z") program
    Thanks & BR
    sandun

  • Wrong values for Total stock - Inventory managment ( negative values)

    Hi,
    I loaded inventory management load
    2LIS_03_BF   INIT 01.06.2009 - 06.7.2009 No Marker Update (compressed with check)
    2LIS_03_UM  INIT 01.06.2009 - 06.7.2009 No Marker Update (compressed with check)
    the first quantity received is from 11.06.2009  and 0RECTOTSTCK is showing 300 which is correct.
    on 10.06.2009 it is showing -300 for 0TOTALSTCK when it should be 0 since there hasn't been any data.
    whats the right way to compress my cube if I don't want to load BX and how can I resolve this.
    thanks

    Hi,
           The standard process to get correct values in report is
    1. First u have to do init laod from 2LIS_03_BX and u have to compress the request with 'no marker update' chk box unselected.
    2. Next u have to do init load from 2LIS_03_BF and u have to compress the request with 'no marker update' chk box selected.
    3.  Next u have to do init load from 2LIS_03_UM and u have to compress the request with 'no marker update' chk box selected.
    4. Normally u can run delta loads from BX and BF data sources. ( Compression is not mandatory. Even if u compress it will improve the performance)
    Regards,
    Thilak

  • Stock Valuation - Inventory Management Cube

    Dear Sap Gurus,
    We have implemented the Inventory Management Cube in BW.
    Quantities are correct, but we have difference on the stock valuation.
    For some material stock value are correct, for some other they are not correct.
    A saw a lot of OSS notes and how to on this subject, I am trying to solve this issue using these documents, but based on your experience could you explain me how you solved this issue ????
    Thanks,

    Hi
    Did you follow the correct steps?
    Initialisation of BX data in the first step.(Loading of Opening Stock)
    Then The request in which the opening stock was loaded must always be
    compressed with a marker update
    Init load of BF And UM in the second step
    The request in which the historical material documents were contained
    must always be compressed without a marker update and
    Successive delta uploads must always be compressed with marker
    updates
    Check this whether you have done this or not.
    Because of missing the steps here also would give you wrong values,
    Regards
    Ram

  • Consignment Stock for Inventory Management

    Posting as a new thread...
    I have installed and loaded the Inventory Management Cube 0IC_03 in our development and quality systems.  During testing we have found just one problem with Consignment Stock.  The Stock Initialization (2LIS_03_BX) does not bring in an initial quantity (BWMNG) for any material flagged as a Consignment Stock (Stock Category = K, field BSTTYP). 
    My question - is there a good reason for this or is this a problem?  It causes a problem with reporting, because balances are now off.  Do I need to change how reporting is done for Consignment?
    It seems to me that the BX extractor should be picking up the initial balance.  I am trying to debug the code, but am getting a headache!
    Any help would be appreciated!
    Yes, I have reviewed the "How To..." documentation, but don't see anything regarding consignment stock.
    We are at BW 3.0b Support Pack 25.
    Lisa.

    Thanks, Ken.   I don't know that this note actually helped me, but I did another review of OSS notes.  We have applied 3 of them (726485, 756151, 762219) and our consignment issue has been resolved.
    Thanks for pointing me back in the right direction!
    Lisa.

  • Can i transfer stock with transfer order in Inventory management?

    Can i transfer stock with transfer order in Inventory management between two storage locations in the same plant?

    I hope you are referring a transfer order and the transfer between two storage locations connected to the same warehouse, and just not doing movement at IM level with a transfer order.
    But, if you are referring to making a bin-bin transfer within the warehosue and you want to influence the storage location to storage location automatically, yes, you can do this. You should use 'storage location control' configuration under WM-IM interface to drive this. Essentially, you need to maintain the warehouse, destiantion storage type, plant, destination storage location and movement type 311. When you perform the transfer order confirmation to move inventory from a storage type (inventory is under source storage location) to the destination storage type (per the configuration setting) there will be an automatic transfer posting made to move inventory at IM level from source to desintation storage location.

  • Inventory Management - Stock Ageing

    Hello,
    I'm new to Inventory Management in BI and I was trying to create a Cube to check the stock ageing.
    I follow the needed initialization for the 2LIS_03_BF, 2LIS_03_BX and also UM. The load was successful executed however I can't see any data using the ListCube.
    I looked into the fact table and the data is there but I can't see it and I don't have it available for reporting.
    Can you help me?
    thanks
    Paulo

    Hi,
    For loading data to 0IC_C03 check..
    Treatment of historical full loads with Inventory cube
    Setting up material movement/inventory with limit locking time
    For Stock Ageing Check the artcle.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f15839-0cf1-2b10-c6a7-ebe68cc87cdc
    Thanks
    Reddy

Maybe you are looking for