Invoice receipt does not include tax for each item in PO history

Hi gurus,
            we received 2 items against a PO
netprice-- tax-----total
item 1--> 9010--
100
item 2-->205--
25
                      total GR amount           :      125
invoice received for $125
but if i see in the PO history the tax for both items is added up and shown for only one item.for 2nd item it shows only netprice,it doesn't show tax .
is it a config setting thats affecting this or any other setting that need to be looked at
The PO history looks like this:
for item 1----
for item 2)    .
GR--100--
25
Inv. Rec.-----105--
20
invoice verification is a new concept to me,I would appreciate any suggestions about the settings tobe looked at for rectifying this?
Thanks,
Chris T

hi Chris T
i think this not a config issue. i think the MM people when they do GR/IR they adding all tax to the net pice .
to solve this we can cancel that GR/IR and post with right net price
thanks,
subbu

Similar Messages

Why the State field does not include "DC"?

The field for State has a drop down box but does not include DC for the District of Columbia.

Are you talking about State field in our form templates? Yes, DC wasn't listed, but you can modify forms created from these templates easily. Here are the steps:
1. Select the dropdown and click on the Pencial like edit button
2. Mouse over the option "CT" and click on the "+" button to add a new state "DC"
Thanks,
Wenlan

Handling withholding taxes for each invoices in DMEE

Hi,
I am doing DMEE(out going flat file) for argentina.
I need to dispaly alll wihthold taxes for each invoices.
Can any one know how to Process multiple line item in DMEE tree.
Here i am using Exit function.
I got all withholding items one table ,But how to i dispaly these item for each invoices.
This should look like this.
Header
Item1
Item2
Withhod tax1
withhold tax1
item1
item2
Withhod tax1
withhold tax1
Withhod tax3
Thanks,
Bala
Edited by: bala chandran on Dec 29, 2009 1:45 PM
Edited by: bala chandran on Dec 30, 2009 11:27 AM
Edited by: bala chandran on Jan 4, 2010 8:56 AM

Hi,
check this OSS Note:
https://service.sap.com/sap/support/notes/1286713
Best regards.

A JE created from the AP Invoice does not include the project # on all trx

A JE created from the AP Invoice does not
include the project # for the amounts entered in the freight box. To
duplicate, do the following:
1. Open an AP Invoice
2. Enter BP Code
3. Select Service type
4. Enter a Project Code in drop down box on Accounting tab
5. Enter a line in the Contents; specify GL Account, amount and Tax
Code Open Freight box
6. Enter an amount in one of the lines
7. Click ADD
8. Go back to the invoice and go to the Accounting tab Click on the GL
journal note and you can see that the line corresponding to the
contents line has a project, but the line corresponding to the Freight
box item does not.
My customer users these projects when printing GL agings and the
information is very important. Shouldn't this information be carried
forward on all transactions on the Journal entry? Is there a way to get this information to post?

Hi Pat,
the project code (PC) on the marketing document may only be applied to the business partner (BP), hence the only row in the associated journal entry (JE) with this project code is that of the BP.
You can link project codes to specific accounts (CoA -> select account -> account details -> project code) & this project code will then be assigned every time the account is found in a JE.
If you require the project code to be applied to the freight, you may assign this project code to the account you have defined for this freight. The drawback is naturally that the project code will then be pulled every time this freight is used, regardless of whether or not the PC is associated with the BP or not.
It is possible to manually assign project codes to every row in a journal entry, hence this should also be possible with SDK. You might explore the possibility whether it might be possible to automatically assign the BP PC to all rows in the JE using a script.
All the best,
Kerstin

Message no. F5350 account type/account for invoice reference does not match

Hi SD Experts
Getting error message when the Billing document is released to accounting.
"Message no. F5350 account type/account for invoice reference does not match item"
Client is having 6.0 version , I have checked OSS notes, only available for upto 4.7 version.
Please help to solve this issue.
Thanks/karthik

have you checked which account type is maintained in respective G/L account which supposed to be hit once invoice is released . eg: check in Reconcilation account assigned in Customer Master in FS00, Reconcillation account for accoun type should be - D= Customers.
similarly for other accounts such as "Revenue account" & check Field status group assigned in G/L account in FS00.
Check & revert

MIRO-Account type/account for invoice reference does not match item-F5350

Hi gurus
please help
When I tried to cancel an MIRO invoice, it is giving me the error
Account type/account for invoice reference does not match item". "F5350 "
Please advise.
thanks
MSJ

Hello,
This seems to be a configuration issue or you might be entering the wrong details.
This is a standard transaction. IF you feel there is nothing wrong, then search for OSS notes on http://service.sap.com to see if there is a solution to this problem.
cheers,
sushil joshi

I have Adobe Acrobat XI (ver 11.0.07). Adobe Help instructs me to find the document comparison command at "View Compare Documents," however, this command does exist on my screen. My View drop-down list does not include a command for Compare Documents.

I have Adobe Acrobat XI (ver 11.0.07). Adobe Help instructs me to find the document comparison command at "View > Compare Documents," however, this command does exist on my screen. My View drop-down list does not include a command for Compare Documents. Where else can I find this command?

What version of Acrobat do you have? This feature is only available in the Pro version, not in the Standard version.

Payment Card - To Be Authorised Amount does not include Shippig Charges

Hi Guys,
In the Payment cards tab SAP as a standard calculates Total "TO BE Authorised" amount as NET pr + Taxes (Screen field: FPLAA-ENDWR).
It does not include shipping charges. I would like to include the same. I guess there is no customization available for this. Is there a way out...
Thanks and Best Regards,
Jay Enn

Hi Jay,
You can assign pricing procedure in delivery to calculate Shipping costs and then
so that you will be able to capture entire cost and bill customer accordingly
Why not you set the period in Customizing for Sales and Distribution by choosing Billing -> Payment cards -> Authorization and settlement -> Specify authorization validity periods.
Regards
Srini

Premiere Pro Project Manager does NOT include After Effects files.

Warning: Premiere Pro "Project Manager" does NOT include the After Effects 'dynamic linked composition' files associated with the project when "Collect File and Copy to New Location" resulting in the incomplete and loss of all dynamic linked compositions in the new project destination ( folder or disc drive ) .. I know this also includes Photoshop dynamic links and assume includes Audition audio files as well.

Here's the best way: Personal Responsibility.
Put all of your project files in one file. Stop asking PPro to do it for you. It's simple. This is a no-brainer. If you create a linked comp, create it in the same file as your PPro project and files. When you send it to Encore, create the Encore project in the same folder. Works all the time, every time. When you're sure that you're finished with the project for the forseeable future, move the entire folder off your workstation into storage. Do I move a copy of each asset (video clip, image, audio, etc.) into this folder before I import it to my AE or PPro project? Yes I do. Is it overly time-consuming? Not really. I can fly on my machine. Does it beat not being able to open a project later. Oh yes. Yes it does. I'd say I did 50 projects last year this way. When I occasionally had to move a project folder back to the workstation, I had no problems. Everything worked as it did before I off-loaded it. That's because I take personal responsibility for my projects. It's imporatnat that theyt work, especially if I end up having to hand it off to a third party down the road.
BTW, my workstation is RAID 0. If you are using anything less, you need to upgrade. What I'm trying to tell you is that my system works very well. I have not always done things the right way. I have had my share of frustration. The point is that I learned. Now I'm passing that on to you. I use CS5 on an HP Z800 with a measely 12 gigs of ram and a single i7 quad core and the aforementioned RAID 0 configuration and a hacked Nvidia GTS 450. It works quite well. I'm sure I would do even better with another i7, 12 more gigs of ram and a Quadro 4000, but this is what they give me to use.
Additionally, I'm using CS5 at home on a MUCH older HP xw8200 dual dual Xeons, 12 gigs of ram and software-only MPE. Guess what? It works quite well.

Sorry does not make up for this purchase!

Since corporate wouldn't give me an email to send this to, I'm posting this here.
Original-Recipient:{removed per forum guidelines}
Final-Recipient: {removed per forum guidelines}
Action: delayed
Status: 4.4.7
Will-Retry-Until: Sat, 10 Jan 2015 21:20:31 -0600
X-Display-Name: .info
---------- Forwarded message ----------
From:
To: <[email protected]>
Cc:
Date: Thu, 8 Jan 2015 22:20:28 -0500
Subject: Fwd: Elite and Irate Customer
---------- Forwarded message ----------
From:
Date: Mon, Jan 5, 2015 at 2:02 PM
Subject: Elite and Irate Customer
To: [email protected]
Hello,
I'm a customer that wanted to bring to your attention the lack of customer service I've received from the Best Buy store at your Tri-County location, here in Ohio. On the 14th of November, I walked in the store to buy an open box electric stove that was advertised on your website. Your website clearly stated that one was in stock at the Tri-County location. I called the store and spoke to a representative prior to my arrival at the store to confirm that this information was accurate and the rep simply told me yes it was, if it says it one the website then to go off of that.
So I went to the store to purchase the stove and was unable to find it. I had several associates help me look for it and nobody could find it and the managers determined that it wasn't in stock. Since it was a Best Buy mistake, the manager offered to give me the new version of the stove for the same price, which saved me a little money. As I'm patiently waiting for the final word from one of the managers, I start looking around for other things I may possibly want to buy and I come across an open box french door refrigerator, so I decide to purchase that as well. Nothing was wrong with it, except for a couple scratches. Keep in mind that this is nearly a couple weeks before thanksgiving, where I had nearly 30 attendants. I just bought a dishwasher and microwave from lowes and wanted to have my complete appliance set on display just in time for Thanksgiving.
When the items arrived at my home, a couple days before Thanksgiving, I was relieved that I received them on time. For the most part, the delivery crew was acceptable, except for the fact that they broke a light switch on the wall as they were trying to move the refrigerator in it's place. They told me about it and I told them that that was okay and that I was just happy that I received my appliances. As anyone else would do, I waited for the fridge to get cold before I put the food back in and when it came time to do so, I noticed that the middle flap between both french doors was broke. It's a bit deceiving because if you just look at it you can't really tell, but after opening and closing it a couple times, you could easily tell that it was broken. So I called Best Buy that same day and told them of the problem. I asked them if they had that part at the store, so I could just come in and get the replacement. Note, that on the appliance defect report this was not listed, so I'm assuming it was damaged during delivery or was overlooked. I mentioned this to the manager. He said, that the item had to be special ordered, so as disappointed as I was that my fridge would not be fully operational for thanksgiving, I said it was okay and he told me that he would call me once it came in. To give you a better idea of what my family is experiencing, we don't use the left door on the fridge.
2 weeks go by and I still haven't received a call, so I decide to call and check in for an update. An associate tells me that the item just came in yesterday and that he would call me back in a few minutes to schedule a repair. I don't receive a call that day, so I call best buy back a few days later. Again, I speak to the same associate and he tells me that the item never came in and that the manager was just going to give me a new fridge instead. So I call your corporate office and speak with an associate and he says that he will get to the bottom of it and help me set up the delivery.
Well on the day of the delivery, which was a Saturday, I was told that it would be dropped off sometime between 3 and 5 in the evening, or something in that timeframe. What do I do? I empty out my fridge and clear a path for the delivery personnel. It being a Saturday, I had plans and I haven't received a call from anybody. So around half past 5, I start putting the items back in the fridge, as well as move the furniture back in place. Keep in mind, this is no easy task. I have a 4 bedroom home and a family of 5, so yes, I have a lot of furniture and a fully stocked fridge. This probably took at least 2 hours to get everything cleared and to put it back in place when I found out they were not showing up.
I then get a call at 15 till 6 from the delivery crew telling me that they were on there way. Surprised and irate that they are now calling me, I have to refuse the delivery because we we didn't have time to wait around since we already had plans for the night. I get another call from a Best Buy associate trying to reschedule and I told them that I've had enough of their dealings and that I would let corporate handle it and through corporate I would see that a proper delivery would then be scheduled.
Well this morning I saw on my phone that I have several missed calls, as early as 6 in the morning from Best Buy delivery stating that I am suppose to recieve my fridge in the morning and I was there 2nd stop. I call the guy and tell him that I was unaware of the delivery and that I would give you guys a call today to schedule the appointment. I intend to call you after I send this email regarding that.
So in all, I've probably been on the phone with Best Buy personnel at least 10 times and several hours. I spoke to several associates, including 3 different managers, 3 different delivery crews, and a rep from your corporate office once. I think it's safe to say that this has been a total nightmare and saving a couple hundred dollars does not make up for it. I wanted to reach out to you because as an educated consumer, who also happens to be an elite Best Buy member, I can firmly say that because of this "Nightmare" I will not be buying any more appliances from your store and you would be lucky if I bought anything else from the store. You do have some pretty good deals on games and movies though, so I may continue to do that.
Please take this information and utilize it accordingly, obviously, this is not how business should be ran and I know this isn't the first time something like this has happened. The exact same thing happend to my friend a few years back from a different store.
V/R,
Member ID: {removed per forum guidelines}

Hello penningtonj,
While it's great to hear that you seem to have received new inbox units at open box prices due to your experiences, it certainly sounds like the delivery portion of the experience could have been vastly better for you.
I'm glad to hear that the oven is working well for you, and I'm truly sorry to hear of the difficulties you've experienced with the open box refrigerator. Our open box items should be thoroughly inspected and marked accordingly for its condition or any missing parts or accessories. It is disheartening to hear that a damaged part may have gone unnoticed. With that said, it's awesome that the store has offered to replace it.
We strive to ensure our deliveries are seamless and hassle-free. Given you have a sizable family, I know emptying a refrigerator is no easy task, as I grew up in family of a similar size, and should the refrigerator have to be emptied for any reason, it was a bit chaotic! It is regrettable to hear that the delivery team was late, and that they failed to contact you sooner to let you know of their delay. Furthermore, it is strange that you may not have been aware of (and thus completely unprepared for) the rescheduled delivery. I can understand how this would be concerning, and further aggravating.
I sincerely apologize for the continued hassle you've experienced with purchasing these appliances. With that said, it appears that you are currently scheduled for delivery on 1/28/15. You should receive a phone call the night before to provide you with a time frame of when to expect them. If you should have any questions or concerns, please feel welcome to reach out to me!
Respectfully,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

When the apple review team review our app,they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

when the apple review team review our app，they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of trajectory replay come ture。in fact， we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
the blow is the content of the review team email：
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

Material document 4900000006 does not include an accounting document

Hi guys
I created normal sales order, delivery and and released it thr VF01.
Then I created the RE document without order reference and PGR. But while checking the accounting documents in VL02N it gives the error as follows
Material document 4900000006 does not include an accounting document
Diagnosis
The system cannot find an accounting document for the material document 4900000006.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
Procedure
Choose Continue and then choose another function.
Find out when the material document was created. If the document was created prior to the Release changeover, ask your system administrator to carry out the conversion of the documents. The individual steps required for document conversion are described in the Release Notes for Release 2.1B
Please give me the solution
Thanks in advance
Rahul

Hi Rahul,
Can you tell me how did you resolve this error indetail or step by step? I have a same error in test client. I am doing returns with stock catergory of E while PGI and then it throws error message.
Material document 4900000006 does not include an accounting document
Diagnosis
The system cannot find an accounting document for the material document 4900000006.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
Procedure
Choose Continue and then choose another function.
Find out when the material document was created. If the document was created prior to the Release changeover, ask your system administrator to carry out the conversion of the documents. The individual steps required for document conversion are described in the Release Notes for Release 2.1B
regards
rc gopi

The content menu in my Acrobat X Standard does not include the "multimedia" selection??

What am I missing? The Adobe Classroom In A Book clearly refers to it...

Hi,
I am sorry to hear that you're having trouble in locating 'Multimedia' tools in Acrobat.
Acrobat X Standard does not include most of the interactive object tools. You need to use Acrobat X Pro for those features. Kindly check the comparison matrix at:
http://www.adobe.com/products/acrobat/matrix.html
~Sandeep V.

The version of "Adobe Flash Player" on your system does not include the latest security updates and has been blocked. To continue using "Adobe Flash Player", download an updated version from Adobe's website.

The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.

You haven't actually asked a question, but as stated you should only download Flash Player directy from Adobe.
Nor have you said what version of OS X and Safari you are running.
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3 or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

In FB60, duplicate invoice check does not work if invoice date is different

In FB60, duplicate invoice check does not work if invoice date is different
This issue is in FB60 and not MIRO.
Duplicate invoice check is activated in vendor master.
I posted an invoice for a vendor with amount $ 100, Reference 1234 Invoice date Nov 01, 2011
I tried posting for same vendor (and also Co Code) with amount $ 100, Reference 1234 Invoice date Nov 01, 2011. System does not allow. This is fine.
Now I change only date, from Nov 01 to Nov 02, and system allow posting.
Why I don't get the error message when date is different ? It should not be treated as a different invoice since invoice reference, amount, Vendor and Co Codes are same.
SAP documentation says that it checks document date during duplicate invoice check even for FI invoices, then why does it allows in this case.
Is this a bug ?
I already tried changing settings in SPRO under LIV, this does not impact FB60 invoice booking.
Thanks
Sandeep

Hi,
Use BTE - 1110 - (Check on Invoice Duplication) for FB60. Take the help of your ABAPer to make a coding in Function module mentioned in BTE.
Need to make a copy of the FM and then you can do relevant coding.
refer the link.
[http://www.thesapconsultant.com/2006/10/sap-business-transaction-events.html]
Regards,
Shridhar

Invoice receipt does not include tax for each item in PO history

Similar Messages

Maybe you are looking for