Invoice Reduction Invoice Payment Terms - Due Date

Hi gurus,
At the time we apply invoice reduction in MIRO screen, both invoices (regular and reduction) take vendor payemnt terms (for ex Due in 30 dyas). Is it possible to assign the invoice reduction invoice a fix payment term "Due Immediately" via configuration?
Thanks in advance

Hi there,
Im afraid there is no setting that will have the system post different payment terms in the invoice reduction
than what is in the invoice. In MIRO, if you use PO reference to create the IV document, the payment terms are copied from the PO and not from the vendor master. The business reason is, that the PO represents the contract between vendor and customer including the terms of payment. Also check out note 322430 as this gives a good description of the proposal logic for the terms of payment.
I hope this helps,
Best regards,
Adam.

Similar Messages

  • Payment terms - due date on a particular day of the week say friday?

    Experts is it possible in SAP payment terms to configure a term such that due date is on a particular day of the week?
    I want use payment term to determine due date for weekly billing cycle (sunday to saturday) for the invoice to be due on Friday net 27 days from mid point of the week
    eg 1. if a customer is invoiced any day between October 4th to 10th, the due date should be Friday Nov 6th
    eg 2. if a customer is invoiced and day between October 11th to 17th, the due date should be Friday Nov 13th
    Is this possible?
    Thanks in Advance

    You need custom development for this. Using custom development, Substitution in FI or User exit in SD
    I. FI Substitution -
       Create substitution with exit, for field day1 (BSEG-ZBD1T) and baseline date (BSEG-ZFBDT). In exit, determine number of days for required Friday from baseline date you want to use (say document date). This way, due date will be on Friday.
    For determining Friday, use calendar or Ztables.
    II. Invoices created in SD - If you are gerenating invoices in SD, use exit EXIT_SAPLV60B_008. This exit has table ACCIT which also has same fields Day1 and Baseline date. Follow same logic mentioned above.
    I hope this helps.

  • Liquidity Forecast not considering payment term / due date

    I have configured liquidity forecast and it is picking up values just fine (ECC 6.0).
    My problem is that in FF7B it is not taking "Payment Term" and "Due Date" in to consideration at all. Thus as a result not showing what is due on which date.
    What do I need to do to ensure that FF7B (liquidity forecast report) show balances considering "Payment Term" and "Due Date"?
    Or is here some functionality missing, or I am facing a program error?
    Regards

    Hi,
    You do not have to give the Days there.
    Their functionality is different.
    Assign 15 in Payment terms Tab in No of Days, Percentage should be blank.
    Then the system will calculate the net due date 15 days from Document Date.

  • Payment terms / Due date Schedule

    Dear experts, how do the Payment terms definen in FI - FICA, relate to the Due Date Schedule used in Student Lifecycle Management?. Do I define Payment terms for the contract account, or just the Due Date Schedule?
    Best regards.

    Hello:
    The Due Date Schedule (DDS) is used to split fees into payment plans (example 50% at beginning of term, 25% one month later and 25% two months later).  The DDS is maintained in the Academic Calendar. To define the DDS you first need to set up a Time Limit and Time Limit Sequences using the IMG path: SLCM>Master Data in SLCM>Academic Calendars.. Note that at least one DDS is required even if you do not provide payment plans for the students. This DDS will have one payment date.  The DDS can be assigned to the Program, Module, Student Account or Contract Object.
    Each partial payment is an orgianal open item which in turn can be split into an FI-CA installment plan using Transaction FPR1.
    As an alternative to the DDS you can use Transaction FPR1 to set up installment plans. This transaction provides more control over payments including dynamic definitoin of due dates.
    Regards,
    Patricia

  • Update AP Invoice Payment Schedule (Due Date)

    Dear All,
    Is there any API for AP Invoice Payment Schedule (Due Date) in Oracle EBS R12.
    Please advice.
    Thanks

    Hi there,
    Im afraid there is no setting that will have the system post different payment terms in the invoice reduction
    than what is in the invoice. In MIRO, if you use PO reference to create the IV document, the payment terms are copied from the PO and not from the vendor master. The business reason is, that the PO represents the contract between vendor and customer including the terms of payment. Also check out note 322430 as this gives a good description of the proposal logic for the terms of payment.
    I hope this helps,
    Best regards,
    Adam.

  • AR Invoice with Installment Payment Terms

    Hi to All,
    We have an invoice where the payment terms are based on installment. The installment is for 18 months.  Automatic cash receipts have been applied correctly for Installment 1 and Installment.
    Our situation is this where we want to apply an On Account receipt to installment 3.  When we query for the installment 3 invoice we are getting the following error message:
    "FRM-41830: List of Values contains no entries"
    Basically the the invoice is not being queried.  We checked the invoice, it is complete but the installments 3-18 are open.  What we like to know if we can preform an on account receipt to an installment invoice...if so what setup do we need to look for.
    Thanks in advance for any help.

    Hi Bharat,
    Thanks for your reply.  We checked the invoice payment schedule in the tables are 4th to 18th are all open.  We have also verified this thru the forms and same appears.
    So when we go to receipts and attempt to apply on accounts funds to the invoice.  We cant query for the invoice.  The following oracle forms message appears:  "FRM-41830:  List of Values contains no entries"

  • Issue with Idoc when creating invoice taking wrong payment term

    Hi All,
    My Requirement is invoices created through B2B interface should hold the payment term of purchasing party instead of invoicing party
    400021 is Invoicing party having payment term 2000 i.e. 20 days
    414478 is the Purchasing party having the payment term 1000 ie 10 days
    So invoice should hold the payment term 10 days instead of 20 days
    I have an IDOC which is creating Invoice, I am trying to reprocess the IDOC to see the issue but could not able to achieve the solution.
    Please help me out which approach should i follow to achieve the solution of this issue.
    Thanks,
    VB

    Hi,
    Try using E1EDK18 segment. Put "Number of days" ,Qualifier and check if this achievs the desired result or not? If yes then you have to use an user exit to put the number of days in the IDOC.
    Cheers,

  • Payment Term Master Data

    Can anyone advice me on how to create master data attribute data source in R/3 for Payment Term :
    Please advice me on which table that i should extract the data from :
    Thank you in advance

    Hello Sarvanan,
    Check out table : TVZBT for payment terms master data.
    Create generic datasource on the table TVZBT
    replicate it into BW
    assign the datasource to the infosource
    map the objects create transfer rule transfer structure.
    CReate infopackage and schedule it.
    Regards
    Nimesh

  • Payment terms transaction data

    Hello,
    Could you please tell me in which table Payment terms transaction data is maintained. I have tried checking in BSEG table, but I am not getting the output, it is going into error or not responding after the execution. (I have given only Cocd, Fiscal year, only one posting date and payment term in the selection criteria) Is there any other table which has the payment terms(ZTERM) field with transaction data?
    Thanks

    Hi ,
    Payment terms table   T052
    Terms of Payment Key  ZTERM
    Regards
    Surya

  • Single invoice for multiple payment terms

    Hi Friends,
    I have given 2 different payment terms for 2 line items in single order and the billing is splitted due to this reason. I want to know where the system is checking this control. Because I want to create single Invoive even the payment terms are different. (The routine 003 under Data VBRK/VBRP in SO to Bill copy controls will be usefull only to create single Invoice for multiple SO's where the payment terms is same). But I need to create single Invoice even for multiple payment terms.
    Can anyone suggest me at the earliest please.
    Kumar

    Hi Kumar,
    The Billing Split is take care at Copy control level.
    For multiple line items in one single SO, with different Payment terms is not acceptable as per the  business logic and its not best practices.
    Please suggest the business to go on Split method only.
    Or
    Try to use Proforma Invoice Concept.
    Regards
    Srini

  • Baseline date, terms of payment, net due date in MIRO Parked document

    Hi all:
    When parking a docuement in MIRO with a PO reference the terms of payment, baseline date, and due date are all determined.
    The problem is when we don't have a PO yet, just the vendor and the amount, is there a way for MIRO to determine the terms, baseline date, and due date from the vendor master?

    Hi,
       Just enter the Vendor in MIro and it should pull the Payment terms from the Vendor master (Company Code Area).
    Baseline Date & Due Date are derived based on the settings in the payment term.
    KInd regards

  • Payment Term - Fixed date

    Hello Friends,
    Can any one please explain me how does the field "Fixed date" for the following payment term behaves?
    Best Regards,
    Jeetendar

    Hi,
    Can you do a test on this? I have tested and got 25th March as due date.
    If fixed date is not mentioned, system simply calculates due date based on number of day/months mentioned. If fixed date is mentioned, Due date dayis always fixed to that date. This may behave differently if you mention cash discount percentage in first row. If a % is mentioned, this means, user can get mentioned % of cash discount till the calculated date based on fixed day and additional months. In second row, if you don't mention any %, these settings are used for due date calculation.
    After due date, item becomes overdue.
    In you case say you mention 1% in first row and no % in second row with additional months 1.
    This means,
    You can get 1% cash discount till 25th March and no cash discount between 25th March to 25th April.
    Item is over due after 25th April.
    Hope it is clear. I suggest to play around by changing these settings and posting invoices.
    Thanks,
    V V

  • Payment terms - Baseline date calculation.

    Hi
    In payment terms configuration, we have option "No Default" for determining Base line date.
    If we have payment terms with above configuration.......
    In Fi, Baseline field will be blank while posing Customer Invoice, in which case We can enter baseline date manually. However If Invoice is generated from SD-billing document, we dont have any field "Baseline date" while posting billing doc. In such case how system determines Baseline date. When I checked few billing documents, Baseline date is defaulted with BIlling date even "No default" option is selected.
    Is there any configuration in SD that prompts this action. or is it always billing date is defaulted ?
    Please clarify

    Hi !! Madhu,
    There is a way, but not exactly what u require! You can check while maintaining the condition records in t.code VK12, observe the last two columns available, one is called a 'Fixed Value date' & the other is called 'Add Val Days'.
    If you make any entry in the field 'Fixed Value date' this will be the date from which the payment terms start taking effects. Or if you make an entry in Add Val Days' in this case the payment terms start taking effect from billing date + the no. of days mentioned in this column.
    You cannot make a entry in both 'fixed value date' & 'Add Val date'  fields at one time.
    Give your feedback if this has worked for you.
    Regards,
    PATHIK

  • F110 bill of exchange: error FZ731 "...requires payment before due date"

    Hi everybody.
    I'm facing an issue that is driving me crazy <:-)
    I want to configure a payment method of type "bill of exchange" (in Spain, "pagaré"). I have several due invoices (due dates: 30/11/10, 31/12/10...), which have this payment method. Some other items are not yet due (30/1/11).
    When carrying out a payment run thru transaction F110, the system asks for the bill of exchange issue date, which I have populated as 30/11/10. At another tests, I have populated as 10/1/11.
    When running F110, the vendor items are then classified as exceptions, with error FZ731 "Pymt method I in the item requires payment by b./exch. before due date", and also message FZ732 "Item not due in 000 - 000 days".
    I think this problem may be motived because the definition of the payment method "I" (company code data) says: Days until due date: 0. But this field is not updatable.
    I've searched the message numbers in the forums, but found no answer.
    Anybody can help? Kind regards,
    Alvaro

    Never mind, I just had to update the Paying company code, fields Bill of exchange due date... > Earliest-lates due date in...days.
    Regards.

  • Payment term baseline date in SD

    Hi, all:
       In the configuration of payment term, there are four criteria for baseline date:
       no defalut date; entry date; docuemnt date; posting date.
       For SD receivable items, what the "entry date" and "docuemtn date" respectively stand for when calculate the open item receivalbe due date? Does "document date" mean billing docuemnt date or order date?
      Thanks for your explanation!
    Justin

    Dear Justin
    Document Date is the date on which you do a particular transaction.  It is neither order date nor billing date.
    Thanks
    G. Lakshmipathi

Maybe you are looking for