Invoice updating issue - development case

Hi All,
We are into extended classic scenario and we create invoices from SRM side.
At the header level of the line item we will be able to see a field FI posting date.
Requirement is once the invoice is approved we need to
change the FI posting date to current date.
This needs to be done to prevent invoice from erroring out due to being posted in closed period.
Can this be achieved from BAdi : BBP_DOC_CHANGE_BADI or bbp_determine_driver?(as per note 1020736)
I face the following issue in debugging mode when using docchange badi method BBP_IV_CHANGE
observed here that in IS_header:field itm_type is not getting updated and
also the approval_ind once the invoice is approved
Please help!!Kindly provide suggestions to achieve this change.
Regards,
Supriya

Hi Vikas,
We went ahead with the badi implementation.We were able to change the posting date to current date.
But we follow one step approval workflow for invoices.So the workflow considers - change in a field as change in document and triggers the workflow again.
we are working on supressing this extraneous workflow.
Let me know if you need further details. Do you have any suggestions?
Thanks
Supriya

Similar Messages

DTW AP Invoice update issue

Good evening experts,
I'm trying to update my AP Invoices using DTW. I'm trying to copy the Comments field into the JrlnMemo field.
I keep getting the "Can not find this object in B1 Application-defined or object-defined error65171" message.
I'm using Docentry from OPCH table as the RecordKey/Docnum/Docentry in my template.
It looks like this:
DocNum     JournalMemo
DocNum     JrnlMemo
175     CELULAR 997884046 LG
I have also been trying this template.
Recordkey     DocNum     JournalMemo
Recordkey     DocNum     JrnlMemo
175     175     CELULAR 997884046 LG
and finally this one
Recordkey     DocEntry     JournalMemo
Recordkey     DocEntry     JrnlMemo
175     175     CELULAR 997884046 LG
Is there anything wrong with this? My goal is to update the JrnlMemo field so it can be updated in the OJDT.Memo and JDT1.LineMemo fields.
Thanks in advance.
best regards.

HI
Try this:
Recordkey DocEntry JournalMemo
Recordkey DocEntry JrnlMemo
1 175 CELULAR 997884046 LG
OR
Some time DTW will behave like this when you use the normal excel sheet to upload.
Better try with b1 standard template for updating the invoices,

Network is not the issue with 8.1.3 Update issue...

Apple TV issues since 8.1.3 supposedly fixed connectivity issues and I was "told to trouble shoot network issues" as they appear from time to Time" been with AppLE since 1989 and believe me I tested all know issues in our totally AppLE network, even ran download test with Comcast. Best we can tell 8.1.3 and the subsequent updates to Apple TV killed the streaming internally and makes the old 8.5 hrs (or some other ramdom number, usually in hours) to download issue to reappear. We had no issues prior to this upgrade and now basically have limited access and as previously stated when you start a movie rental, it takes a bit but if it starts and crashes midway through the movie, if and when you can get it to restart it won't go back to the stopped point on Resume Play and if you can't get it restarted you are hosed in 24 hrs when the time expires.
8.1.3 has a problem and like it or not it seems not to be widespread. unfortunately there is no revert to previous version on Apple TV.... And no we are not using old equipment but products that are less than 3 months old and an Apple wireless hub.
JUst want to call attention to this issue in case there might be an actual Apple developer or tech support guru listening. Don't need some "did you troubleshoot your network" BS....

If you have synced with iTunes before, I would download the update via iTunes in a first step and install it in a second step. That way you can be sure that the update data is complete and not corrupted during the download. The update size via iTunes is bigger, because you'll get the whole iOS downloaded and not just those parts that needed to be changed, as you get, when you download over Wi-Fi onto your phone.

Is there a consensus on how to solve security update issues?

hi,
i'm writing to you from a PPC G4 (AGP graphics) that will self-destruct by the time i switch off and (attempt) to re-start tomorrow. i will then need to do a re-install, just to see if i have gotten any replies (grinds teeth to the root). it will probably be my 8 th re-install in the past month. i just can'st takes no mores, Cap'n
<exasperation>deep breath... each time i have done a clean install, zero-ed all data when erasing (7 times over, on this occasion), repaired permissions before and after each software update, and followed every advice i could find via google to pre-empt another "Error: underlying task reported failure on exit" and the inevitable hanging grey screen; i have earned nothing but another Disk Utility report of the same problem. my HD seems to be OK - Disk Utility and Disk Warrior both say it's "verified" by SMART (although i've read this could be no assurance...). it's 40 GB, nothing else installed but NetBarrier; nothing saved on it (just 3GB of OS).
i've searched this forum over the last weekend and come across a diverse range of methods in resolving software update issues. i have tried downloading the security update and safari 3.2 directly from the site and bypassing Software Update- to no avail (but noticed that they are quite larger in MB than via Software Update??).
the one suggestion the intrigued me was installing the update via Terminal. why would this be any different? the worst thing about this is that there is no universal way that'll work for all, just individual solutions for different macs??? could my problem be exacerbated by using the double layer (double the permissions to fix?) of a Panther OS with Tiger Upgrade disk?
when i last tried to resolve the "error" with safe mode, fsck and DU Repair Disk/Permissions, which initially failed, i resorted to Disk Warrior, which re-built the directory, and "fixed" the HD. when i re-tried fsck it said the HD was "ok", but i still had the "error: underlying task..." on DU?
is there an issue with the Security Update oo8 because it's PRIMARILY for 10.5 and not Tiger? why have some encountered this problem and others escaped any seeming conflicts ? is this problem also caused by JAVA updates (there are, after all, 4 updates!)
more importantly, WHAT CAN I DOOOOOOOO?
thank you

looking at your suggestion to check /Library/Startup items in the concurrent thread ("Help needed after installing Security Update 2008-008"), i recalled that the only thing i have in this file system is 3 folders concerning Intego, NetBarrier and Virus Barrier. one of these contains the NetBarrier x4 daemon which has no image, just the apple "pencil, ruler, pen on paper" "A" image. i don't think it correctly downloaded, but this the case in every instance.
i'm running netbarrier x4 10.4.5 updated and downloaded on installation. intego Support says that there should be nothing in my "Startup/Login items". i thought they meant Login items (users>login items) because when i take the folders out of my "/Library/Startup items", NetBarrier fails to "initialize".
intego is now on newtbarrier x5, but they say x4 is fully compatible with Tiger???
my baby maybe getting on, but it's strong enough, i just need to know what's bugging it!

10.9.2 Update Issue (VPN) - Eclipse Perl debugger issues while connected to VPN

This post was initially added to this discussion: 10.9.2 Mavericks update issues
I have yet another issue related to 10.9.2 update - Eclipse Perl debugger issues while connected to VPN...
One of the big changes introduced by 10.9.2 update - are VPN changes (security fixes). Unfortunately, whatever these changes are - they "broke" Eclipse (OpenSource IDE) debugger. I am not sure if *all* programming languages (Eclipse plugins) are affected by this, but I know for sure that 'Epic' (Perl plugin) debugger *stopped working* while system is connected through VPN.
Here is the error that gets “popped-up” in the Eclipse:
Timed out while waiting for Perl debugger connection
… and here is exact exception stack that gets printed:
Unable to connect to remote host: 130.10.210.74:5000
Compilation failed in require.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
main::BEGIN() called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
eval {...} called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
BEGIN failed--compilation aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
Can't use an undefined value as a symbol reference at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 7596.
END failed--call queue aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
(of course IP address changes dynamically for each VPN connection session)…
I was able to prove that this issue is related to 10.9.2 update:
Issue *does not* exist under 10.9.1 (I had to revert back to 10.9.1 to get it working again)
No updates were performed around the same time 10.9.2 update occurred (I verified that using Software Update log)
No configuration changes were introduced around the same time
Reverting back to 10.9.1 using Time Machine (thanks god I had backup !!!) fixed the issue
Steps to reproduce this issue:
In Eclipse, try to use 'Epic' (Perl plugin) to debug any perl script while *not* connected through VPNEpic debugger works
Connect to VPN
Start Epic debugger to debug same script
Debugger *does not* start, and "Timed out while waiting for Perl debugger connection" error pop-up comes up after some time. At the same time, exception stack (listed above) is printed in Eclipse's console
I am programmer/software developer, I work remotely (telecommute) and thus have to rely on use of VPN to connect to company's intranet. Perl - is primary language used by my team, and we use Eclipse IDE with Epic plugin - heavily. Use of Epic's debugger - is a *very large* aspect of my work, I cannot work without it. So in essense, 10.9.2 has *entirely* disrupted my ability to work! It took me almost a week to get back to normal work environment, and I cannot afford to let it happen again... I need Apple's development team resolve this VPN related issue, as soon as possible! Because of this issue, I am *stuck* with 10.9.1 and can not upgrade my laptop to any other versions. In fact, I had to disable system updates - just so I do not run into this issue again... I contacted Apple's Tech Support on 02/28 with this issue (Ref: 582428110), asking to raise trouble ticket. Since then, I tried to follow-up on that issue, but do not get any information. Please advise on the status:
is there a trouble ticket to track this issue?
is there any progress?
what's the ETA for an update that fixes this problem?
- Val
Message was edited by: vpogrebi

Am I the only one experiencing this issue ???

Extended Classic Scenario - PO Update issue

Hello experts.
We are working with SRM 5 in the extended classic scenario and we have a serious problem in a productive environment for the following case.
(01) We create a purchase requisition (PR) in R/3 with several items;
(02) We send PR to the SRM generating a shopping cart;
(03) The buyer creates a PO for all items from the shopping cart;
(04) The PO is transmitted to R/3;
(05) For some cases buyer changes the PO wich is sent back (updated) to R/3;
So far so good. The problem happens when some item in the request already has GR or Invoice. In those cases when the PO is updated on SRM, its transmission to R/3 does not occur, generating an error log that can be seen in transaction RZ20 of SRM.
I understand that if any GR or Invoice exists for the item it can no longer be modified, but is it expected that no other item can also be modified from SRM? What is the expected behavior for this case?
Moreover, even if the GR and Invoice have been canceled, we are still unable to update the PO in R/3 from SRM. Is this a expected behavior? It was our understanding that the PO should be updated if all incoming documents (GR, Invoice, SES ..) were completely canceled.
We appreciate any help on this matter.
Thanks and Regards,
Evandro Miasato

Hi, Masa,
Thank you for your advice,
I set the method U:Print Using Berkeley Protocol, after that
in trx. SP01 I have the Error Status on Composite Document -
Status Incorrect (Reason Unknown).
Best regards,
Guzal.

Sender JDBC Adapter Select/Update Issue

Dear All,
We have configured a Sender JDBC Adapter to Poll data from the DB2 tables. It is working fine and both the select and the update queries written are also getting properly executed and are changing the status of the flag from Y to N once read from database.
In the communication channel ->
select * from <table> where flag = 'N'.
update <table> set flag = 'Y' where flag = 'N'.
But I have one doubt after executing the select query some new data comes into the table of status flag 'N"., then will this unselected data will also be updated to 'Y' .
The question is while we do a select and update from XI on the DB table and at the same time there is an insert happening into the table from the other end how will the adpater behave in this case.Will it result in missing of some records during next select/update transaction from XI..
Your inputs will be appreciated.
Regards
Amit

Amit
Did you ever get a solution to your question ?
Sender JDBC Adapter Select/Update Issue
Posted: Apr 24, 2008 2:29 PM Reply
Dear All,
We have configured a Sender JDBC Adapter to Poll data from the DB2 tables. It is working fine and both the select and the update queries written are also getting properly executed and are changing the status of the flag from Y to N once read from database.
In the communication channel ->
select * from <table> where flag = 'N'.
update <table> set flag = 'Y' where flag = 'N'.
But I have one doubt after executing the select query some new data comes into the table of status flag 'N"., then will this unselected data will also be updated to 'Y' .
The question is while we do a select and update from XI on the DB table and at the same time there is an insert happening into the table from the other end how will the adpater behave in this case.Will it result in missing of some records during next select/update transaction from XI..
Your inputs will be appreciated.
Regards
Amit

Saving\updating issue or bug in C5?

When I update buttons or even text in captions, the changes do not seem to be taking effect after I close the project, so I have to continuously go back and make the changes either on my local mathine or if another developer opens the files from our network. Is anyone else experiencing this problem?
Thanks.

Rick,
Typically we use the network drive to store and pass the projects back and forth. I am checking to see if others are actually editing on the network drive. I am experiencing this on my local HD as well, with changes that I made last week not being reflected when I open the file locally today (no network drive involved). I am wondering if this is a cached project issue.
Thanks
Dewey Cooper |
From: Captiv8r [email protected]
Sent: Monday, January 03, 2011 12:05 PM
To: Dewey Cooper
Subject: Editing Saving\updating issue or bug in C5?
Hi there
From what you are asking it would seem that your mode of operation is to make edits to a project while the project is on the network? If so, that's a pretty awful way of operating and is fraught with issues.
The preferred way of operating is to only edit a Captivate file while it is on your local hard drive. Then if you want it on the network for others to make edits, copy it there. When others need to edit, they copy it locally, edit and copy it back.
This also requires careful coordination so that simultaneous edits aren't made. Then one person saves back to the network and his/her changes are saved, the person number two saves back and blows their changes away and replaces them with the changes they made.
In other words, in this situation, whoever saved last wins. So you need to be very careful about coordinating who is making updates and when so that only one person is making and saving changes at any given time.
Cheers... Rick
http://www.robowizard.com/pc.gif
Helpful and Handy Links
http://www.gooberguides.com/ProductPages/Captivate/Captivate5Foundations.htm
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5
http://www.ShowMeSolutions.biz
http://sorcererstone.wordpress.com/
http://www.gooberguides.com

AW: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

Hallo
Sehen Sie in der Anlage.
Alles ist original.
Ich möchte jetzt eine kostenlose Fehlerbeseitigung.
Oder geben Sie mir eine kostenloses Update.
Ich habe ein Anrecht darauf.
Beste Grüße
Werner Göbel
Mobil: +41 (0) 79 559 83 21
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Bill@VT
Gesendet: Mittwoch, 27. August 2014 16:16
An: Werner Göbel
Betreff: Update von Acrobat 8.0 auf 8.3
Update von Acrobat 8.0 auf 8.3
created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6678331#6678331>
How did you purchase? AA8 has not been available for almost 8 yrs or so. The only current version available from Adobe is 11 and you can not upgrade from 7 to 11, but have to buy the full product.
Updates also require the use of the S/N of the qualifying product (AA7 in your case) to be able to use the newer product. So at this point, it is unclear what you actually have.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6678331#6678331
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

< This thread has been answered a duplicate of Update von Acrobat 8.0 auf 8.3 >

WG: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

Hallo
Ich bin ein korrekter Mensch.
Sie sehen in der Anlage, dieser Mail, das ich das Produkt ehrlich gekauft habe.
Ich verwende nur original Software.
Die Acrobat Version 8.0, war immer sehr gut für mich.
Diese Version reichte für mich vollkommen aus.
Ich hatte einen Computerabsturz und musste Acrobat auch neu installieren.
Die Acrobat Version 8.0, ohne Update, stürzt immer ab.
Das können Sie auch im Internet lesen.
Jeder weiß das, dass Acrobat Version 8.0, ohne Update abstürzt.
Es gibt aber dies Update nicht mehr zum Download.
Ich erwarte jetzt von Adobe, kostenlose Abhilfe.
Ich möchte jetzt eine kostenlose Fehlerbeseitigung.
Oder geben Sie mir ein kostenloses Update auf die neue Version.
Ich habe ein Anrecht darauf, dass Sie mir kostenlosen Ersatz liefern.
Beste Grüße
Werner Göbel
Mobil: +41 (0) 79 559 83 21
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Bill@VT
Gesendet: Mittwoch, 27. August 2014 16:16
An: Werner Göbel
Betreff: Update von Acrobat 8.0 auf 8.3
Update von Acrobat 8.0 auf 8.3
created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6678331#6678331>
How did you purchase? AA8 has not been available for almost 8 yrs or so. The only current version available from Adobe is 11 and you can not upgrade from 7 to 11, but have to buy the full product.
Updates also require the use of the S/N of the qualifying product (AA7 in your case) to be able to use the newer product. So at this point, it is unclear what you actually have.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6678331#6678331
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I was not trying to imply that you improperly purchased the product, but that the source may have been a rip off and that could be the problem. From what I can see, it appears that you were able to install Acrobat, but can not do the updates. In that case, try the updates from the ftp site. I will have to come back with the address that I do not have on this machine. The html updates are no longer available for some reason, but the ftp site contains all the updates. You do have to install the updates in order in general, though you only have to reboot after the last update. I will change computers and find the ftp link to provide you.
The ftp site is: ftp://ftp.adobe.com/pub/adobe/acrobat/.

WG: [Acrobat Installation & Update Issues] WG: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

Mein Guter Freund.
Ich brauche nur eine Datei mit einem Vollen Update.
Ich möchte das Update mit einer EXE starten können..
Beste Grüße
Werner Göbel
Mobil: +41 (0) 79 559 83 21
Skype:<skype:werner6331?call> Werner Göbel<skype:werner6331?call> (werner6331)
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Bill@VT
Gesendet: Donnerstag, 28. August 2014 17:15
An: Werner Göbel
Betreff: WG: Update von Acrobat 8.0 auf 8.3
WG: Update von Acrobat 8.0 auf 8.3
created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6681580#6681580>
I was not trying to imply that you improperly purchased the product, but that the source may have been a rip off and that could be the problem. From what I can see, it appears that you were able to install Acrobat, but can not do the updates. In that case, try the updates from the ftp site. I will have to come back with the address that I do not have on this machine. The html updates are no longer available for some reason, but the ftp site contains all the updates. You do have to install the updates in order in general, though you only have to reboot after the last update. I will change computers and find the ftp link to provide you.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6681580#6681580
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Warum Sie antworten nicht auf meine Frage??
Wie muss ich Instaliren??
Beste Grüße
Werner Göbel
Mobil: +41 (0) 79 559 83 21
Skype:<skype:werner6331?call> Werner Göbel<skype:werner6331?call> (werner6331)
IGH Holding AG
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Bill@VT
Gesendet: Sonntag, 31. August 2014 22:09
An: Werner Göbel
Betreff: AW: AW: Update von Acrobat 8.0 auf 8.3
AW: AW: Update von Acrobat 8.0 auf 8.3
created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6689459#6689459>

Why can't we get a straight answer from Apple about updater issues?

Why are there thousands and thousands of posts from people all having the same issue? We try to update IPod software using latest updater, and it causes IPod to no longer be recognized. All we want is someone from Apple to FIX THE PROBLEM! Yet all we get are refferals to complicated articles that never seem to work for at least half the people. Clearly it is a problem with these updaters. WHY IS APPLE NOT FIXING THIS ISSUE? Can anyone give me a straight answer!?

Hi Wolf,
Welcome to Apple Discussions
"thousands and thousands of posts"
There are roughly 10,300 thread with 50,000 posts in the iPod Nano forum, and there are probably another 500,000 who don't even know it exists. I don't there there has been a thousand posts on the updater issue. It may seem like thousands upon thousands, but don't forget; you're at an Apple Support Forum.
"All we want is someone from Apple to FIX THE PROBLEM!thousands and thousands of posts"
There's no need to "shout". I don't think Apple is going to hear you from shouting in a user to user forum. Nor will you probably get a answer (here) from Apple for the same reason. I have a -------- (straight) answer for you. I don't know what's going on specifically (no one really knows in this forum because they are all users. Anyone who would know won't say), but I can assure you that Apple isn't ignoring the issue. They are the quickest to respond to any problem that comes their way. If you would like to get Apple's attention, I don't suggest ranting and raving in the iPod user to user forum. I suggest submitting polite feedback to Apple here.
Jon

Creating the New Update groups in case of the Credit Management

Hi Can any one help out in the following requirement:
Is it possible to Create a new update group in case of the Credit Management?SAP standard provides only three update groups viz., 000012, 000015 and 000018. We would like to have a customized group in order to meet the clients requirements.
          Also is it possible to update the open contracts value in the credit exposure?
   Thanks & Regards
   Soma

HI
You can define your own credit groups according to your client's requirement.
here is the path....
IMG > SPRO>SALES AND DISTRIBUTION --> BASIC FUNCTIONS -->
CREDIT MANAGEMNT / RISK MANAGEMENT --> CREDIT MANAGEMENT
--> DEFINE CREDIT GROUPS --> NEW ENTRIES AND CREATE YOUR OWN
CREDIT GROUPS AS UR UR REQUIREMENTS.
hope this will help u ...
bye

Items of invoice include services from previous invoice of a current case..

Hi colleagues,
I have one problem, I've never faced with that one before. I have a case and one invoice for the case, for example later I want to add 2 new services and create a new one invoice for these two services - in this case a system creates invoice with these two new services and with all services from previous invoice for the same case with cost 0.
Could you please tell me what might be a reason for this? Has anybody faced with this one?
Thank you very much for your time.
Kind regards,
Alexander.

Hi Alexander
Sorry for my late response, I've been quite busy lately.
Wel, happened to me once in a customer, and I never found the cause of the error. Anyway, I could solve it.
In my case, if you see the field VBRP-ISHBELNRF and VBRP-ISHPOSNRF of the already billed service, points to a NLKZ record that does not exists in NKSP. (or something like that, I dont't remember very well, but truly, there is an inconsistency between what is stored in VBRP-ISHBELNRF and VBRP-ISHPOSNRF and what you see in the insurance verifcation tables)
It seams that, if you use the Standard IV and then the Extended IV, somehow the NLKZ records are grooped into one position of NKSP.
The solution I've found is to filter those already fully billed services before they are processed.
To do so you must enhance the form CHECK_SELECT_SERVICES_xx of the include LN090FXX (XX is the country version, depending on the country version your are using another form could be called)
F p_nfal-abrkz IS NOT INITIAL.
SELECT SINGLE * into lv_zihacase FROM zihacase
   WHERE einri = p_nfal-einri
     AND falnr = p_nfal-falnr.
IF sy-subrc = 0.
lt_nlei = p_nlei[].
CLEAR lt_rnabi1.
REFRESH lt_rnabi1.
LOOP AT lt_nlei ASSIGNING .
Esta función estándar analiza si la prestación ha sido facturada. Tiene en cuenta anulaciones
    CALL FUNCTION 'ISH_CHECK_ABGERECHNET'
      EXPORTING
        einri               = p_nfal-einri
        falnr               = p_nfal-falnr
        lnrls               = -lnrls
        zeitr               = 'X'
      I_NLEI              =
       DETAILED            = 'X'
      READ_PER_CASE       = 'X'
        read_buffer         = 'X'
      EXACT_ABDAT         = ' '
     IMPORTING
        lei_abger           = lv_abger
     TABLES
        e_rnabi1            = lt_rnabi1
    CHANGING
      HIGH_ABDAT          =
    EXCEPTIONS
      NO_EINRI            = 1
      NO_FALNR            = 2
      NO_LNRLS            = 3
      OTHERS              = 4
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
Si el campo LV_ABGER es inicial, quiere decir que no ha sido facturada
    CHECK lv_abger IS NOT INITIAL.
    lv_abmen_p = 0.
    lv_vproz   = 0.
    LOOP AT lt_rnabi1 ASSIGNING -vproz.
    ENDLOOP.
Si hay multicobertura por importe, la cantidad del campo LV_ABMEN_P tiene que sumar 1
Si hay multicobertura por porcentaje, el campo LV_VPROZ debe ser 100
Si se da alguna de estas condiciones, quiere decir que la prestación fue facturada.
se mantiene el >= ya que es posible que, por inconsistncias, las prestacions hayan sido facturadas varias veces.
    IF lv_abmen_p >= 1 OR lv_vproz >= 100.
      DELETE TABLE p_nlei FROM .
    ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
I hope it helps.
With best regards
Matías

My new iPod Classic will not sync with my new Mac Book. My iPhone 5 does, so does 2nd gen. iPod touch. Apple Store cannot figure it out. Tried different Classics on different Macs, same thing. iTunes update issue ?

The iPod Classic I bought a month ago is not synching with my new Mac Book I bought 3 weeks ago. All the software was immediately updated. My iPhone 5 synchs fine, and so does my 2nd generaton iPod Touch. The original computer I synched all of these devices on was my HP latop. I bought my Mac and Classic to the Apple Store for a 'Genius Appt' and they could not figure out what the problem is. The connected my Classic to another computer and the same thing happens. It says device is not recognized. They also took other iPod Classics and connected them to my Mac and other Macs. The same thing was happening. They took notes and said it probably is an iTunes update issue.
I can manually drag songs into my Classic but I lost all playlists because it cannot be backed up as well and they had to restore it. For now I am holding on to it but it's usless to me if I cannot use it the way I liked too. I used it for the gym and bike riding and my last iPod battery died after 6 years. A charge would last 45 miutes. I love the Classic for what I use it for but it's a $275 brick to me now. At least the renewed by receipt so I can get a full refund.
Is anyone else seeing this issue ? The Apple Store employee said he saw a first generation iPad havng the same issue. As of now the Support Dest is unaware of this. As much as I love my new Mac I am disappointed I cannot sync my new Classic to it. Total bummer.
Any help would be apprecated.

By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.

Invoice updating issue - development case

Similar Messages

Maybe you are looking for