Invoke SAP GUI from Webdynpro ABAP
Hi All,
I am calling the webdynpro screen (using FM 'WDY_EXECUTE_IN_PLACE') from SAP GUI screen. In the webdynpro screen I have created one button upon clicking the button it should go back to the SAP screen from where I called the webdynpro screen.
Could some tell me how to do this.
Thanks in Advance.
Hi Saba,
Please check this: [this FM seem to be not supported by SAP and only release internally within SAP|Re: how to exchange data between wda program and abap program?;
Thanks,
Duy
Similar Messages
-
Moving to second screen of SAP GUI from webdynpro application
Hi friends,
I want to open the secatt applications second screen from webdynpro UI. For this I am using the following code on webdynpro side
CALL METHOD cl_wd_utilities=>construct_wd_url
EXPORTING
application_name = 'appname'
IMPORTING
out_absolute_url = lv_final_url.
SPLIT lv_final_url AT 'webdynpro' INTO lv_first_url lv_second_url.
SPLIT lv_second_url AT 'ztwb_tor' INTO lv_final_url lv_apostrophe.
CLEAR lv_final_url.
CONCATENATE lv_first_url '/gui/sap/its/webgui?TRANSACTION=secatt&RB_TEST_CONFIG=X&RB_ECATT_SCRIPT=& ECTC_VER-NAME =' ls_ztwb_test_case-testcase '&okcode=ECOB_SHOW' lv_apostrophe
INTO lv_final_url.
CALL METHOD lo_window_manager->create_external_window
EXPORTING
url = lv_final_url
RECEIVING
window = lo_window.
lo_window->open( ).
But I am still able to open the first screen of secatt and not the second screen with the relevant testcase datails.
But if I try to open the second screen of SCAT transaction I am able to open it using the following url.
CONCATENATE lv_first_url '/gui/sap/its/webgui?TRANSACTION=SCAT&*CATA-ABLNR=' ls_ztwb_test_case-testcase '&okcode=ZEIG' lv_apostrophe
INTO lv_final_url.
Is there anything else that I need to pass as parameters in SECATT transaction.
The program of SCAT transaction is a module pool program.
The program of secatt transaction is a function pool program.
Thank you.Hello Mohsin,
I checked the program of SECATT. its just uses the workbench manager to start the respective GUI screen and its not passing any parameters. So I doubt whether you can pass parameters or OKcode to the SECATT tcode.
What you can do is to identify the respective landing screen of SECATT tcode and invoke them by passing parameters.
BR, Saravanan -
Requirement: Open Transaction code in SAP GUI from WD ABAP application
Hello All,
I have a WD ABAP application which is accessed from SAP GUI and Portal. In SAP GUI, there is report which calls the application URL.
In the WD application, I need to call a transaction code. At this juncture, I made use of the ITS url. But,, the SSO does not work in SAP GUI.It works only in portal.
As a solution,we identified the entry point i.e. SAP GUI or portal. Then, based on entry from SAP GUI, we tried to call the transaction code using call transaction statement. But, that replaced the wd application. We instead wanted it as a popup or atleast another session.
Now, how do we open a transaction from WD screen in another session?
Also, can we setany configurations in the system to make sure the SSO works for all the transactions i.e. ITS used in SAP GUI.?
Thank you.
Regards,
SharathHi,
This question gets asked many times.
Depending on the circumstances, this can be achieved with varying degree of success
So here is some code that might help you.
This can (does) load a Windows GUI.
Some things to consider.
1. Browser settings can get in the way a bit, asking the user if they want to open a ".sap" file
2. The user may have a SAP session open so consider adding a "/o" to the system code.
3. The Custom variable might want to contain a [Options] section for "Re-use"
4. The SAPLogon_ID may be required if using SSO (SNC)
I have modified the code below, but you will get the idea.
JS
* Create the shortcut contents
call function 'SWN_CREATE_SHORTCUT'
exporting
i_system_command = lv_com
i_saplogon_id = lv_logon_id
i_sysid = sy-sysid
i_client = sy-mandt
i_user = sy-uname
i_custom = lv_custom
importing
shortcut_string = lv_string
exceptions
inconsistent_parameters = 1
others = 2.
* Convert to xstring to execute....
call method cl_http_utility=>if_http_utility~encode_utf8
exporting
unencoded = lv_string
receiving
encoded = lv_xstring
exceptions
others = 1.
* Now call to open the shortcut.
lv_file_name = 'mytrans.sap'.
lv_mime = 'application/x-sapshortcut'.
call method cl_wd_runtime_services=>attach_file_to_response
exporting
i_filename = lv_file_name
i_content = lv_xstring
i_mime_type = lv_mime
i_in_new_window = abap_true. -
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input
Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.No cross posting
Read the "Rules of Engagament"
Regards
Juan -
Error when Interative Adobe Form is called from Webdynpro ABAP.
Hi Experts,
I trying to call a Interactive adobe form from ABAP Webdynpro application but I am facing the below error.
Line: -
The following error text was processed in the system GJD : User session (HTTP/SMTP/..) closed after timeout
The error occurred on the application server az18u021_GJD_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Line: -
When I uncheck the enabled property of the Interactive From in the Page of the WebDynpro I am able to execute the application successfully.But the Adobe form behaves as a Static Form when I uncheck the enabled property.
So kindly provide your valuable suggestions to avoid the above error when I am calling a Interactive adobe form from Webdynpro ABAP.
Thanks in Advance.
Regards,
Arun.Hello,
Hello, are you sure you have your ADS credentials configured correctly and valid? I guess you know that is the only difference between clicking enabled on true or false. If you are not sure, you can use SE38, search for FP_* and pick some reports to check the licencing. The names of the reports are good enough to recognize the right one.
Or maybe that is a security problem? Have you checked the ADS_ERROR string? Did you use the ADS trace?
check: http://help.sap.com/saphelp_nw70/helpdata/en/2c/241a427ff6db2ce10000000a1550b0/content.htm
and especially note 999998
Regards, Otto -
Calling a webservice from webdynpro ABAP.
Hi,
Anybody have doc/material with screenshots on calling a webservice from webdynpro ABAP (In WAS 7.0 version using service calls ) with clear steps ?
Thanks in advance. Ponts will not be a constraint for right answers
Praveen
Edited by: Praveen kumar Kadi on Feb 23, 2009 11:19 AMHi Praveen,
1st Step : configure Logical Port
http://help.sap.com/saphelp_nw70/helpdata/EN/16/285d32996b25428dc2eedf2b0eadd8/frameset.htm
2nd Step : Generate Proxy Object
http://help.sap.com/saphelp_nw70/helpdata/EN/16/285d32996b25428dc2eedf2b0eadd8/frameset.htm
3rd Step : Instantiating the proxy object & calling the methods exposed by webservice
data: sys_exception type ref to cx_ai_system_fault,
sys_exception2 type ref to cx_ai_application_fault,
client_proxy type ref to zco_myesa, "MY PROXY CLASS
lv_ret_code type int4,
lv_input type zsend_email_input,
lv_response type zsend_email_response.
data: lv_from type string,
lv_from_address type string,
lv_to type string,
lv_to_address type string,
lv_subject type string,
lv_msg type string.
lv_input-from = 'MYSAPTEST'.
lv_input-from_address = '<someAddress>'.
lv_input-to = 'Prashant'.
lv_input-to_address = '<someAddress>'.
lv_input-subject = ' TEST'.
lv_input-msg_body = ' Hi this is wonderfull to see it work'.
try.
create object client_proxy
exporting
logical_port_name = 'BASIC'. " Basic is a TYPE G RFC Destination
call method client_proxy->send_email
exporting
input = lv_input
importing
output = lv_response .
catch cx_ai_system_fault into sys_exception .
data lv_err type string.
lv_err = sys_exception->if_message~get_text( ).
write: / lv_err.
catch cx_ai_application_fault into sys_exception2 .
lv_err = sys_exception->if_message~get_text( ).
write: / lv_err.
endtry.
if lv_response is initial.
write: /'Not Executed'.
else.
write: /'Did Execute'.
endif.
Greetings
Prashant -
Calling Java code from Webdynpro Abap UI
Hi All,
Can anybody tell me, How to make calls to java code on a button click from webdynpro ABAP UI ?
Thanks in Advance.
Jenish .V. JoyHi Jenish,
As I am new to WebDynpro for ABAP I could not help you out exactly.But See this link which will help you to create applications in WebDynpro by using ABAP language.
https://www.sdn.sap.com/irj/sdn/developerareas/abap?
rid=/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
If you get any answer for your question let me know.
Regards,
Karthick K Eswaran -
Calling SAP scripts from WEBDYNPRO
Hi
We need to call SAP scripts from WebDynpro application. As per my understanding we need to do following steps
Create a new RFC function module and create sap script output in PDF format.For this
- use OPEN_FORM , by assigning TDGETOTF='X' in the Options(Structure
ITCPO).
- call function module CLOSE_FORM with option OTFDATA
- convert OTF data to PDF by using function module CONVERT_OTF_2_PDF
Now I would like to know how to display the PDF string from WebDynpro.
Please help....
Regards
SujithHi,
You can call by creating external window method.
create LINK to URL or LINK TO ACTION according to requirement, for this. write code in onaction of that.
data: iv_url type string value 'http://<server>:<port>/sap/bc/gui/sap/its/webgui?~transaction=*se38 RS38M-PROGRAMM=rsparam;DYNP_OKCODE=SHOP'.
data: api_component type ref to if_wd_component,
window_manager type ref to if_wd_window_manager,
window type ref to if_wd_window.
api_component = wd_comp_controller->wd_get_api( ).
window_manager = api_component->get_window_manager( ).
window = window_manager->create_external_window(
url = iv_url
modal = abap_false ).
window->open( ).
Cheers,
Kris. -
Calling GuidedProcess from WebDynpro ABAP
Hi all
can anybody tell me that how to call GP from webdynpro ABAP.
and what are the advantages and disadvantages in this scenario??
if anyone reply then it would be the great help to me
Regards
Suresh babuHey,
You can call a GP from WD ABAP through by implementing a service call from a method that is embedded in your WD. You can refer this link for the same.
http://help.sap.com/saphelp_nwce10/helpdata/en/44/58f9cc0d95311ce10000000a155369/frameset.htm
But you should note here that Data exchange between ABAP WD and GP is not two way but its only one way.
Cheers,
Mandrake -
Calling custom Infotype method from Webdynpro Abap
Hi Experts,
I am working on an application where i need to call a method of a custom defined infotype.
I have done this -->
1. Create a custom infotype 9111
2. SAP creates a class of that infotype ZCL_HRPA_INFOTYPE_9111
3. Inside this method there are few inherited method which provide me functionality of insert , update , delete
i want to call methods IF_HRPA_INFTY_BL~MODIFY,
IF_HRPA_INFTY_BL~INSERT
However when i call these method from webdynpro abap this method does not work.
where as when i try to insert an entry using PA30 transaction it works.
Does anyone know why does this happen and what is the solution?
Regards,
Ashish ShahHi Ashish,
You need to create method inside your assistance class, the class your webdynpro component talks to.
Within the methods of Assistance class you will have to create instance of ZCL_HRPA_INFOTYPE_9111 and call its method IF_HRPA_INFTY_BL~INSERT passing the data.
Cheers
Prashant -
At Craig's suggestion: Why Invoke PERL functionality from WD-ABAP?
Craig -
This is response to your suggestion that I post my own reasons for thinking that it would be useful to be able to invoke PERL functionality from WD-ABAP.
Please note at the outset that these reasons are based on my own personal belief that the relatively new vertical sectors of bioinformatics/biomed could produce reasonably significant income for SAP in a reasonably short time if SAP decided to create application-level functionalities in these areas.
This belief is in turn based on a very significant new initiative which has been publicly announced by the university Medical Center recently voted "most-wired" (Vanderbilt) and equivalent initiatives at other university Medical Centers across the country. (BTW, I've posted a meeting time (Tue 7pm) at Tech Ed for anyone who wants to learn more about these initiatives, the new vertical sectors they define, and how SAP could EASILY play in them.)
So, with this background established, assume that SAP does decide to play in the bioinformatic/biomed sector.
SAP will rapidly find that a lot of biomed is based on the kind of bioinformatics that essentially does pattern-analysis on two kinds of strings: polynucleotide strings (DNA, mRNA, tRNA, etc.) and polypeptide strings (mainly the amino acid strings that form the "primary structures" of protiens.) For example, biomed will soon include the ID of "at risk" markers for all patients in a university medical center, indicating what diseases patients may be genetically at risk for due to SNP's and other abnormalities in their inherited DNA.
Now when such analysis is not done by running "canned" versions of well-developed programs such as the ubiqitious BLAST program for "aligning" polynucleotide or polypeptide sequences, it is done by programs written in languages that offer superb capabilities for pattern-searching and manipulation of strings, e.g. PERL.
Additionally, I know from personal experience and the experience of my SigOther that even data obtained from well-known canned programs must be further massaged by non-canned techniques that again are readily implementable in PERL and other similar languages.
Finally, a lot of bioinformatic/biomed applications require iterative batch execution of canned stat routines such as t-tests or normality tests, which can be conveniently done via calls from languages such as PERL to canned products such as STATA.
So assume SAP wants to develop a biomed application that has:
back-end data containing the usual kinds of info med centers need to know about patients, plus the new kinds of scientific info about patients that med centers are creating
a presentation component that displays these two kinds of data for query, further elaboration/refinement, and subsquent update.
For example, there will be times when a doctor will want to take scientific data on a patient from the back-end (e.g. portions of a patient's DNA), subject it to pattern-analysis of the type described above, and then store the results of the analysis as additional new scientific info in the back-end databases.
And SAP can readily provide the doctor with this capability if it allows PERL functionality to be invoked from WD/WD-ABAP components. In some cases, the PERL will simply invoke industry-standard canned programs such as BLAST and wrap the results in a way friendly to SAP. In other cases, the PERL may do the analysis itself. In other cases, the PERL may invoke stat programs. Etc, etc. etc.
The point is that there is a vast inventory of bioinformatic/biomed PERL code out there, and if SAP wants to get serious about playing in the bioinformatics/biomed sector, it will be much easier to talk to this inventory of programs rather than recreate it in JAVA or SAP inside SAP.
Anyway, please remember - this post was based on the assumption that SAP may want to get serious about playing in the bioinformatic/biomed sector.
If not, then as Rosanne Rosanadanna used to say, "Never mind".Hi David,
Where it can be used :-
Anywhere that you can insert ABAP code to run, you can integrate Perl in the manor that I laid out. The only requirements are the ability to run registered RFC programs, and to execute ABAP code including RFC calls (which is anywhere inside of an R/3 system basically).
Comparison with other techniques :-
All communication from the ABAP stack with the J2EE stack is done via RFC - this is only faster than a registerd RFC Server if Fast RFC is used which means that the J2EE stack MUST reside on the same host as the R/3 instance. Therefore there is no performance difference at that level and any performance differentiation is going to be in the programming language Perl vs Java, or payload encoding techniques (XML) at that level (not withstanding the consideration of development time).
There is also the HTTP Client communication facilities - with or without document encodings (the ICF + eg. SOAP). Again - I'd take a long hard look at whether it is necessary to be encumbered with the data packet encoding/ecapsulation overhead.
What you gain :-
Once you are in the "land of Perl" you have access to essentially any module you can find on CPAN, so any data access you require whether it be some kind of application server technology, or DB, can be fullfilled by whats available there (unless you need to roll your own?). And lets not forget algorythm implemented in Perl or Perl XS extensions - probably very important in the medical/scientifc field.
SOA (IMO) is a big ugly 4 letter word. At the end of the day, you have to look where your time and money is best spent, and whether you can achieve the desired results using Scripting Language Connector technology, or whether you feel compelled to go down a WS-* style route.
However - I would like to say this - IMO it is totally unecessary to wrap up system integration in multiple (expensive both in money, and performance considerations) layers if you are confident that you have good control over both ends of the communication streams. I believe that when your main objective is to utilise large chunks of code written in another language (rather than reimplement it in something closer to SAPs core interests), or communicate with inhouse data sources/systems (I've done this for MySQL before), then this is definitely one such case that opens the door for using my outlined approach (in the article).
Cheers,
Piers Harding.
Message was edited by: Piers Harding -
Trigger an workflow from webdynpro abap.
hai
gurus!
iam new to webdynpro.iam femilier with workflow . can anybody explain me with an clear example, how to trigger an workflow from webdynpro abap.
regards
roseHi Rose
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/using%20web%20dynpro%20java%20and%20web%20dynpro%20abap%20applications%20in%20universal%20work%20list.pdf">Click</a> Here, to know the step by step procedure of using Webdynpro in Workflows
Use SAP_WAPI_START_WORKFLOW RFC
Regards
Abhimanyu L
Message was edited by:
Abhimanyu Lagishetti -
Using the SAP GUI from the NW2004s SneakPreview Download
Hello,
does anyone else have major problems with the SAPGUI from the NW2004 SneakPreview download page?
Im getting a runtime error when logging on:
Runtime Errors MESSAGE_TYPE_X
Date and Time 24.12.2005 00:34:11
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Control Framework : Error processing control
Technical information about the message:
Message classe...... "CNDP"
Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
Program CL_GUI_CFW====================CP
Include CL_GUI_CFW====================CM002
Row 23
Module type (METHOD)
Module Name FLUSHHello Rich,
the sap gui from the NW2004s SneakPreview page is on patchlevel 8. The problem is when i use the latest sap gui from the service marketplace (full install!) i cant event call the gui. Getting a error when doubleclicking on the SAP Gui icon.
'The procedure entry point 'RfcResetTraceDir' could not be located in the dynamic link library 'LIBRFC32.dll' .'
So actually since i installed the NW2004s on my local notebook the only sap gui "working" (at least i can call it) is the one from the NW2004s Sneakpreview page but im getting this error mentioned here on all systems! not only on the NW2004s system
regards,
Markus -
Calling Webdynpro Java Application from Webdynpro ABAP Application.
Hi,
We have developed one Application using Webdynpro Java and I m in need to call the Webdynpro Java application from Webdynpro ABAP.
Require Suggestions to acheive this.
Thanks In advance.
Reg,
Ajay.Dear Ajay,
Assuming that both your applications WDA & WDJ are in the portal & you don't have to pass any parameters to the WDJ application.
Write the following code on the action where you would call the WDJ application.
DATA:
lr_compcontroller TYPE REF TO ig_componentcontroller,
l_component TYPE REF TO if_wd_component ,
lr_port_manager TYPE REF TO if_wd_portal_integration ,
wa_navigation TYPE navigation.
lr_compcontroller = wd_this->get_componentcontroller_ctr( ).
l_component = lr_compcontroller->wd_get_api( ).
lr_port_manager = l_component->get_portal_manager( ) .
* The value inserted into the navigation-target field can be found in the Portal
* content administration tab of your portal. It is the ID or PCD Location field
wa_navigation-target = pcd. " Please provide the PCD Location of the WDJ Application here.
wa_navigation-mode = '0'. "0 = INTERNAL(same page) and 1 = EXTERNAL(new page).
CALL METHOD lr_port_manager->navigate_absolute
EXPORTING
navigation_target = wa_navigation-target
navigation_mode = wa_navigation-mode.
You can get the PCD from the Page properties of the WDJ application page in the Portal.
Hope it helps!
Warm regards,
Upendra Agrawal -
How to call a webService from WebDynPro ABAP ?
We are trying to call a webService from WebDynPro-ABAP application. It is not working, While if we are calling the WebService from a Report, it is working.
How exactly do we call a WebService from a WebDynPro-ABAP application?
What are the main steps involved ?Hi Phani,
You will need to create a service call as follows.
Right click on your WD component name and select Create->Service Call
The wizard will guide you through a series of steps to make a Web Service Call. On the 3rd screen, it will give you options such as Function Module, Web Service, etc
Before making a service call, you will need to create a proxy for the Web service in the ABAP Workbench using a WSDL document as a basis. To create or consume Web services, you will need the authorizations associated with the role SAP_BC_WEBSERVICE_ADMIN.
Maybe you are looking for
-
When closing firefox 4, it remains active on task manager..
when closing firefox 4, it remains active on task manager and cannot open firefox again unless i go to task manager and terminate the process. with older version of firefox, had no problem.
-
Error on deploying Web Service on Weblogic Server
Hi All, I am developing a webservice from a pl/sql package using Jdev11g create webservice from pl/sql wizard. It generates the wsdl, related xmls and other java files correctly and there is no compilation error. But when i try to deploy the we
-
Can Apple Remote Desktop Client 3.8 be used by hackers to hack into my account!
I received an update from Apple to install the Remote Desktop Client 3.8 and am now wondering if hackers can use this software to control my laptop!
-
HT1212 my home button has also stopped working how can i get device in recovery mode.
i was wonding if there is a way to get a iphone 4s into recovery mode with a non functioning home button?
-
Problem in maintaining dimension 11g
Hello. I have DB 11.1.0.7.0 AWM 11.1.0.7.0В During maintainig dimension I receive the error Class of error: Failed Express Descriptions of errors Server: INI: Error creating controller definition, universal in TxsOqConnection:: generic <BuildProcess>