Invoke windows sound recorder in host machine by flex application

Hi
I have a flex application which provides option to invoke
windows sound recorder in client machine. User provides path of
windows sound recorder exe file and using 'navigateToURL('path of
recorder given by user)' method i plan to invoke the recorder in
client machine.
While executing this code in flex builder it runs properly
and invokes recorder. Then i deployed the flex application in a
server and requested using internet explorer. But this time it does
not invoke recorder. The error messge it displayed is gi ven below
SecurityError: Error #2148: SWF file
http://localhost:8080/flex/bin/DEVM.swf
cannot access local resource C:\WINNT\system32\sndrec32.exe. Only
local-with-filesystem and trusted local SWF files may access local
resources.
at global/flash.net::navigateToURL()
I think it is a security issue of sand boxes. Anyway i tried
to make the directory where exe file is kept (ie. system32) as a
trusted location using 'Global security settings panel'. But that
also did not solve the problem. I think only swf files, not any
other files, in the trusted local directories can be accessed by
the remote flex application. Is it right ???
Anyway i dont wish to keep any swf file under
'local-with-filesystem' sandbox in client machine.
Can anybody please help me to resolve this issue please ....
-rakesh

Hi,
The problem is I am not able to connect to database (11i/R12) from host machine. I am successfully able to run the application from host machine after putting entry in "hosts" file.What is the error?
To connect to database I have installed Oracle 9i client on host machine and put the entry in TNSNAMES.ORA generated by 11i/R12, but even doing so I am not able to connect to database.Are you able to tnsping the entry? If not, what is the error?
Please make sure you also follow the steps in (Note 291897.1 - 11.5.10 New Features : Managed SQL*Net Access from Hosts).
Is there any way I can connect to database (Installed on VMWARE) from HOST Machine.Post the error you get when you connect to the database remotely as well as the output of tnsping command.
Regards,
Hussein

Similar Messages

What is the URL for Windows Sound Recorder and is I compatible with podcast

I have recorded a podcast on Sound Recorder on Windows XP and i want to know how i can find the URL and if it is Podcast compatible. It is a wave audio file. Can you guys please, please help me!!!????
W4065 Emachines Windows XP

A recording you made in Windows Sound Recorder, until you do something else with it, is NOT on the Internet and has no URL at all.
.Wav files are not suitable for direct use as podcast episodes as they tend to be uncompressed which makes them shockingly huge to download. You'll want to convert it to mp3 format to make it sensible for sharing.
You'll then need to either upload it to a managed podcasting service, or post it on your own blog, or any of the other normal ways of doing the "podcasting" step of podcasting. There's plenty of howtos and walkthroughs on various ways of doing this.

Is it possible to invoke external REST web service hosted in WebLogic web application from an Adobe LiveCycle Process (ES-4)

Is it possible to invoke an external REST web-service hosted in WebLogic web application from an Adobe LiveCycle Process (ES-4) with parameters as input and manipulating the response depending on the type of parameters it gets back. Then invoking an Adobe Form and prepopulating the Form based on the response parameters? Do you have sample projects that do this invocation. The part highlighted in red is what I need examples.

You can simply use "Execute Script" operation in Workbench and make use of java.net.URL. Below links should help :
http://www.mkyong.com/webservices/jax-rs/restfull-java-client-with-java-net-url/
http://www.adobe.com/devnet/livecycle/articles/building-xml.html
http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=000581.html
Hope this helps.
-Wasil

What to look for in a web hosting company for Flex applications

Hello,
I am trying to figure out what I need to look for in a web
hosting company if I want to deploy my own Flex applications? I
don't anticipate having any special requirements other than the
ability to interact with databases and XML files. Can someone help
me figure out what the server-side requirements are?
Thanks in advance!
Matt

then almost 99.9% hosting will work.
if you want a Flexx app with compiler then oo thats different
but as you say "I don't anticipate having any special requirements
other than the ability to interact with databases and XML files"
then you can go with pretty much any hosting, as long as they have
apache, Database serve and I think thats it.

No "Enhancements" Tab in Windows 8, Recording Device Properties

Hi, I just bought my HP laptop, a HP ENVY 15-q008TX, Windows 8.1. Whenever I'm using the microphone, I've found that the microphone automatically lowers its volume when it's too loud. It's obvious there's some auto-leveling going on in the background, be it by my audio driver or Windows. I don't want that and it's problematic when I'm recording audio for work.
Searching for answers on the internet gave me these common answers:
1) Turn off auto-audio adjustment in Skype -- Done. However, the auto-leveling issue I'm facing happens in other software, even when I'm not using Skype. So it's not a Skype issue.
2) Go to Control Panel > Sound > Select "Do nothing" for communications activity. Done, but issue persists.
3) Go to Control Panel > Sound > Recording Devices > Properties > Advanced > Unselect "Allow applications to take exclusive control of this device". Done, but issue persists.
4) The last solution I've found is to go to the "Enhancements" tab of Speakers Properties AND Microphone Properties and check "Disable all sound effects". This sounds like a possible solution except that my Windows 8.1 has no Enhancements tab at all for both Speaker and Microphone Properties.
I then tried checking the Beats Audio Control Panel (that's the audio software my laptop came with) which has barely any options.
In the "Listening Experience" tab, it doesn't show any auto-leveling option.
In the "Recording Experience" tab, it asks me to attach audio device when my headset microphone is clearly attached and it's working and detected by my Windows and other software.
So at this point I don't know what to do. I suspect there's some audio software issue going on. Any advice is appreciated.

I do not have any issue connecting a microphone. That connecting error in the screenshot seems to be something wrong with the Beats software itself than any issue between my microphone and the HP laptop.
To clarify:
1) My microphone works perfectly and it shows up in Windows Control Panel.
2) I have used my microphone over Skype with no issues.
3) I have recorded many audio recordings with my microphone with no issues.
Where I do have an issue with the microphone, as I have outlined in my original ticket, is that there seems to be an autoleveling or loudness equalization going on where any input audio that goes beyond a certain volume will automatically be softened for 10 seconds, before the microphone increases volume again. I have found this issue reported many times in other forums and apparently it's a common issue, and the solution seems to be to disable the loudness equalization in my Speaker/Mic properties in my audio control panel.
The issue here is that I cannot find this option to disable loudness equalization at all in my audio control panel, be it in Windows or in Beats audio panel (as I have cited in my original ticket). I would like some help to know where exactly I can find and disable the loudness equalization option in my computer because it has to be somewhere since it has been operating in the background.
The manufacturer is Sennheiser.

Sound recorder playback volume low ?

I have a dv6000 notebook , for the first time ever I tried recording sound using windows movie maker to add ''narration'' but the playback volume is very low .
I tried the windows '' sound recorder '' and got the same result .
I've been through all the standard adjustments and settings and have gone into ' control panel ' and adjusted 'levels' and everything else with no success .
When I record a video using the sound on my camera the volume is fine - it's just the mic sound that is low whether I use an external mic or the built in ones .

I have the same issue and I see no responses to your inquiry.. This Windows help menu leaves much to be desired. Im sure I will one day figure out how to work this version that I had no clue I was buying bc it should come with a warning label.. its completely different and agonizing and great help menu lovely.. Im sorry to be so negative wish I could help.. Ill sit here all night till I figure it out and then post an option on how to adjust the recording volume.. Unreal..

Sound Recorder with Wav sequence

Hi
I am lookin for sample code of sound recorder which displays the wav sequence while recording...
something like Windows sound recorder...
If Anyone knows... pls let me knw..
Thanks & Regards,
Chandrakanth

Look at the JavaSound Demo (http://java.sun.com/products/java-media/sound/samples/JavaSoundDemo/)
You must run it as a standalone app (java -jar JavaSoundDemo.jar) or modify your policy files, and thats tedious.
In the app, there are several tabs and select the one of capture / playback.
R. Hollenstein

Re-use Hyper V VM built in Windows Server 2008 R2 host in a new Windows Server 2012 host

Hi Forum members,
I was assigned a Windows Server 2008 R2 host machine with Hyper-V which I used to build many VM's for testing. This host machine now is going to be replaced with a new Windows Server 2012 host machine. Is it possible for me to continue
to use those VM's without any migration (e.g. is it possible to import or simply move the *.vhd + *.avhd files from the 2008 Server to 2012 Server and use them)?
Thanks and Regards,
Hien

That is the official statement of 'support'
They will run, and you may need to do some custom configuration (such as using a legacy nic) but you can't call MSFT support and say your Server 2003 VM is broken on Hyper-V 2012 R2
The act of importing the configuration and linking to the VHD and snapshots will work.
The act of booting the VM and having the OS in the VM 100% happy is not automatic, but should work.
It becomes a question of where do you place the risk.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Audigy 2 ZS no Sound Recording possible (WinXP x

Hi all,?I have some serious problems with my Soundblaster Audigy 2 ZS Card.For years everything worked perfect, I used the soundcard?in many differenthardware setups and I never had any?problems until today. System:?Windows XP Prof x64 SP2?Asus Maximus Formula (newest Bios)Intel Core 2 Duo 85004x2GB OCZ 000MHz DDR2eVGA 8800GTXCreative Audigy 2ZS2x74GB Raid0 WD Raptor2x50GB Raid0 WD RaptorEnermax 620W PSU?I use Windows XP Prof x64 SP2 for the first time, everything seemed to workperfect, but soundrecording doesn't work.No incoming sound works, there is no signal. I also can't record musik with Nero Wave Editor.For exaple I play music in winamp and want to record it in Nero Wave Editor,there is no sound signal, nothing.Also no Signal in the Windows Sound Recorder. Driver: I use the latest Win XP Prof x64 Driver from Creative Homepage?I use a Sennheiser headset and tested it on other PCs/soundcards, no problems. The headset is ok. Normal sound from creative soundcard works perfect, I only have this problemwith the recording and the microphone.
Should I try firmware upgrade?please help me?greatings8kiLL

I tested the "Asus Maximus Formula" onboard soundcard.Microphone works und Stereo Mix Recording also. But I need my working Audigy

No sound recorded on the internal microphone after SoundMAX driver update (Windows XP)

My internal microphone is not picking up sound after I upgraded my SoundMAX driver (available from the Lenovo website here) to version 5.10.1.571.* It looks like this was a problem before and was supposedly fixed in 5.10.1.5520 which is included in the version I have.
I have tested the audio through the Control Panel utility, i.e., Sounds and Audio Devices Properties - Voice - Test hardware. No dice: my voice could not be detected. I also tested via the Windows XP sound recorder utility, i.e., Accessories - Entertainment - Sound Recorder. Same result: silence.
In the Control Panel's Sounds and Audio Devices Properties, I have verified that the Default device for Audio and Voice (playback and recording) all are set to "SoundMAX HD Audio." The SoundMAX software that ships with this laptop (also called "control panel") is very scaled back. There doesn't appear to be anything interesting there to adjust.
Thanks in advance.
* I updated the driver because I was troubleshooting my original problem. My plug and play Logitech laptop speaker suddenly stopped working. Alas, that problems remains and I have created a new one.

Hello,
Here versions of the Audio Features for Windows XP driver that I was able to find:
5.10.1.5410 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka112ww.exe
5.10.1.5520 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka114ww.exe
5.10.1.5670 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka113ww.exe
5.10.1.5710 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka116ww.exe
Hopefully, one of these will work for you.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Accessing physical floppy disk drive from Windows 8.1 host machine to Windows XP SP3 hyper-v?

Hi there!
Could someone help up me? I just wanted to ask if it's possible for a hyper-v to access a physical "floppy diskette" drive?
Here's my setup: I have a Windows 8.1 as my host and Windows XP SP3 as the virtual machine. I would need to access the contents of the physical floppy diskette drive from the Windows XP SP3 vm. This is needed, because, currently our customer is still using
floppy disk drives, to most of their in-house applications. I tried to open Drive A: inside Windows XP SP3 VM while the physical diskette from the Windows 8.1 is inserted. But then again, it cannot directly access the contents. Also, I tried to use "virtual
floppy drives" and copy the files from the diskette. But for some reason, their applications do not support it. I did check device manager in Windows XP SP3 vm, but i cannot see the "Universal Serial Bus Controllers" option inside the VM.
Please help!!! Thank you!
All the best,
MS CAMPer

HI Carey, thanks for this, But this is under System Center Virtual Machine Manager. I already saw this a while ago.
Anyway, is there a way for Windows XP VM to access a physical floppy diskette drives inserted to Windows 8.1 host machine? I dont intend to use Virtual floppy disks. Only Physical ones.
Please please. Need your help guys! :( Thank you!

Never used microphone input before, sound recorder window okay, no sound output.

Sound from sound recorder input goes nowhere, a sound window is supposed to open, it does not.
There is some software missing in my pavilion g7 laptop. Media player sound is fine, internet sound
is fine, only sound missing is from the microphone input. The sound recorder window is open and the
recording bar is moving as the input varies, how do I get the sound to the speakers. Never used this
option before, it might be defective from the factory.
This question was solved.
View Solution.

Problem solved. You cannot turn on computer with the microphone or other audio cable plugged in.
Otherwise the computer does not respond to the inputs, you have to plug in the microphone or audio
cable after logging in and then a window will open that allows you to select the that input over the default.

Error While Joining a domain.| Adding a virtual box machine to host machine's domain

Dear All,
I have a Virtual Box(guest) Where Windows Server 2008 r2 is installed.Virtual box is hosted by a machine which Uses Windows Server 2008 r2. Host machine is a domain controller.I have added guest to another domain
other than host.But whenever I tried to add guest machine to host domain It shows me following error(See below).
An error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "crmrc.com".
The error was: "No records found for given DNS query."
(error code 0x0000251D DNS_INFO_NO_RECORDS)
The query was for the SRV record for _ldap._tcp.dc._msdcs.crmrc.com
Could you please suggest me the solution for it?
Thanks and Regards,
Yusuf

Hello,
C:\Users\Administrator>ipconfig/all
Windows
IP Configuration
Host Name . . . . . . . . . . . . : MSCRM
Primary Dns Suffix . . . . . . . : crmrc.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : crmrc.com
Ethernet
adapter Network Bridge:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : MAC Bridge Miniport
Physical Address. . . . . . . . . : BA-AC-6F-3F-A3-51
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8573:2122:495b:93bc%16(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.78(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 280669295
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-B1-48-BF-B8-AC-6F-3F-A3-51
DNS Servers . . . . . . . . . . . : 192.168.1.78
59.144.127.17
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel
adapter isatap.{39C0341C-67DC-405D-B8F4-25DA555D53C0}:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5efe:192.168.1.78%12(Preferred)
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.1.78
59.144.127.17
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel
adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
I suppose here that this is a DC/DNS server. I see that 59.144.127.17 is
configured as a DNS server. If 59.144.127.17 is
a public DNS server then please add it as a forwarder.
Once done, run ipconfig /registerdns and restart netlogon service on the DC.
Windows
IP Configuration
Host Name . . . . . . . . . . . . : MYLYC
Primary Dns Suffix . . . . . . . : ow.pearl
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ow.pearl
Ethernet
adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT De
Physical Address. . . . . . . . . : 08-00-27-43-C7-47
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::781f:3c7d:edc:684
IPv4 Address. . . . . . . . . . . : 192.168.1.105(Preferred
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 235405351
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-7A-16-5B
DNS Servers . . . . . . . . . . . : 192.168.1.78
59.144.127.17
NetBIOS over Tcpip. . . . . . . . : Enabled
Please delete the second DNS server.
Also, disable all security softwares and try again.
Are you able to ping the DC? If not, that may be a problem with your routes.
Also, use nslookup to check that all is okay with DNS records.
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft Certified
Professional
Microsoft Certified
Systems Administrator: Security
Microsoft Certified
Systems Engineer: Security
Microsoft Certified
Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows 7, Configuring
Microsoft Certified
IT Professional: Enterprise Administrator

Computer Authentication /host/machine name using EAP on AP Problem

Hi All,
I have a wireless access point model 1242 with ACS server. Acs server is intigrated with windows domain. The user authentication is working ok but i would like to have a computer authentication setup. I am using PEAP with MS chapv2 on client machine and on access point using open authentication with EAP. ACS has its on certificate and client has the root certificate. I can see the acs server pulls the /host/machine name from AD but i am getting (EAP-TLS or PEAP authentication failed during SSL handshake) message on ACS server for computer authentication. What could be the problem? user authentication is working OK....
Does computer authentication require the EAP-TLS? I don't have client certificate in my setup.
I would be gratefull for any suggestion / help.

You did not mention whether your clients are running Windows or Mac OS (or some mixture of OS's)? If you are running in a pure Windows environment, it is very easy to enable PEAP machine authentication. It sounds like you have properly enabled machine authentication on the client side (since you are seeing host/machine auth attempts in the ACS log), but have you enabled machine authentication on the ACS server?
Which version of ACS are you running (hopefully 4.2).
Read up on this:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/UsrDb.html#wp354014
ACS supports EAP-TLS, PEAP (EAP-MS-CHAPv2), and PEAP (EAP-TLS) for machine authentication. You can enable each separately on the Windows User Database Configuration page, which allows a mix of computers that authenticate with EAP-TLS or PEAP (EAP-MS-CHAPv2). Microsoft operating systems that perform machine authentication might limit the user authentication protocol to the same protocol that is used for machine authentication. For more information about Microsoft operating systems and machine authentication, see Microsoft Windows and Machine Authentication.
Windows User Database Support
ACS supports the use of Windows external user databases for:
•User Authentication—For information about the types of authentication that ACS supports with Windows Security Accounts Manager (SAM) database or a Windows Active Directory database, see Authentication Protocol-Database Compatibility, page 1-8.
•Machine Authentication—ACS supports machine authentication with EAP-TLS and PEAP (EAP-MS-CHAPv2). For more information, see EAP and Windows Authentication.
•Group Mapping for Unknown Users— ACS supports group mapping for unknown users by requesting group membership information from Windows user databases. For more information about group mapping for users authenticated with a Windows user database, see Group Mapping by Group Set Membership, page 16-3.
•Password-Aging— ACS supports password aging for users who are authenticated by a Windows user database. For more information, see User-Changeable Passwords with Windows User Databases.
•Dial-in Permissions—ACS supports use of dial-in permissions from Windows user databases. For more information, see Preparing Users for Authenticating with Windows.
•Callback Settings—ACS supports use of callback settings from Windows user databases. For information about configuring ACS to use Windows callback settings, see Setting the User Callback Option, page 6-6.

Can 1 instance of Windows 8.1 ENTERPRISE host multiple Remote Desktop connections?

I am shopping for the components for building a machine with fair, high-performance hardware. I have Windows 8.1 Professional. I wanted to know if either Windows 8.1 Professional or Windows 8.1 Enterprise can support multiple remote connections
from users outside the local network. For example, my brother is based in San Diego, CA and has an underpowered laptop. Is there any way to make a remote connection over that much distance, from San Diego to Northern Virginia, from a RDP client running Windows
8.1 Professional to a RDP "server" Windows 8.1 Professional/Enterprise machine, and run a modern, single- or multiplayer- game over smoothly that connection? At the very least, is it possible to run common
apps (e.g. Microsoft Office 2013 IE 11, Adobe Acrobat XI) smoothly on a Windows 8.1 Pro RDP client connected to a Windows 8.1 RDP "server" located 2250+ miles away?
Would upgrading my installation from Professional to Enterprise improve the responsiveness and display quality for my remote users?
I know Windows Server R2 2012 has features specific for handling remote connections, but I am trying to keep a Windows 8.1 user experience. Still, if anyone can show some evidence that Windows Server 2012 R2 Remote Desktop Services (RDS) improves display
and responsiveness over long-distances for remote (RDS) connections, then I will shop for Windows Server 2012 R2 Standard instead. The huge drawback of Windows Server 2012 R2 Standard CALs is the enormous cost to enable 3-5
remote connections for family, non-commercial use.
Has anyone attempted to host long-distance remote access, non-commercially, for 3-5 connections? Has it worked well? What, in general, is required?
T. Webster

Hi,
It depends on the quality of the network connection to run the software smoothly throuth RDP. And I don't think the quality would be better if you upgrade to Windows 8.1 Enterprise.
Windows 8.1 allow only one session of RDP, the Remote Desktop Server in Windows other than the Windows Server edition has a limitation to allow only one concurrent user per session by default, i.e. if someone remotely connects to the computer over RDP then
whoever was logged in at that moment will be automatically logged off, even if that user is physically present at the computer. This is by design.
Regarding more information about RDP, please take a look at the following articles:
Remote Desktop app help
Remote Desktop Connection: frequently asked questions
Best regards
Michael Shao
TechNet Community Support

Invoke windows sound recorder in host machine by flex application

Similar Messages

Maybe you are looking for