Invoking a page url from page1 in book1 to page2 in book2
Hi,
My need is to invoke a portal page url form a portal page. This works fine when
the first page and the second one are part of the same book.
But when the first page is in a first book and the second one in another book,
the portal framework is enable to retrieve the second page.
It seems that in that case, the framework is looking for the second page in the
first book. Therefore it does not find it and load the default page for the current
book.
The problem may be that page labels can be identical while they are not in sames
books and then the framework need an active book as context path ?
Is it possible to programmatically change the active book?
For our project we developed a tree component that enabled expanding a node without
http call. That tree is involved in the portal app navigation and invokes pages
url. It works fine while pages navigations are in the current book.
We did not find any solution,
Finally We decided to enable our tree menu to expand a folder only if it's part
of the active book.
Perhaps you could solve your problem with the setActive() method of the
com.bea.netuix.servlets.controls.page.PageBackingContext class ?
JP <[email protected]> wrote:
>
Olivier,
we also hit this problem. It looks like a limitation of the product.
I tried several things. For example, using a backing file on the page
to
'bring to the front' all the parent of the page I want to activate.
But so far nothing worked.
I would be very interested if you find a solution.
JP
Subbu Allamaraju wrote:
Olivier,
The page change mechanism in the framework expects that the page labels
are unique in the portal tree. So, for page change to work correctly,
please make sure that you've no duplicates.
Subbu
Olivier wrote:
Hi,
My need is to invoke a portal page url form a portal page. This works
fine when
the first page and the second one are part of the same book.
But when the first page is in a first book and the second one in
another book,
the portal framework is enable to retrieve the second page. It seems
that in that case, the framework is looking for the second page inthe
first book. Therefore it does not find it and load the default page
for the current
book.
The problem may be that page labels can be identical while they are
not in sames
books and then the framework need an active book as context path ?
Is it possible to programmatically change the active book?
For our project we developed a tree component that enabled expandinga
node without
http call. That tree is involved in the portal app navigation and
invokes pages
url. It works fine while pages navigations are in the current book.
Similar Messages
-
How to invoke ADF application URL from OAF?
Hi guru's,
We have a developed a custom ADF application using Fusion Middleware 11g.
We would like to integrate this ADF with existing EBS/OAF application.
We were able to invoke ADF URL from EBS responsibility with a special function type "ADFx" in R12.1.3.
Now we need to pass context/profile level parameters from EBS to external ADF application. Like logged in userId/RespId etc...
We are running ADF application also in same EBS DB and hence want to use same fnd_user/Resp concept in ADF.
Can anyone help me on how to pass these parameters like userId/RespId from EBS to ADF while invoking ADF application URL?
If we can append the values to ADF URL, we would be bale to parse them in ADF context. But, i am stuck at passing parameters from EBS.
How Can we invoke ADF URL from OAF page? is there any specific function available or is it just URL invoke?
Also, in OAF the logged in user session information is maintained in cookies(if i am correct), is there any way that we can pass the session level values from OAF to ADF?
Any help in this regard would be a great help!!!
ThanksMay be the following link will help you ->
http://www.oracle-latest-technology.com/2010/12/how-to-dynamically-open-external-url.html -
Problem opening live web page (url) from within keynote
hi.
i encountered this problem during a recent presentation. i have a standard two-monitor set-up, on my laptop viewing notes etc and presenting on the attached monitor. the transitions between my slides are all set onClick.
so, when i encounter a hyperlink in my presentation (of the web page type), when i click on it, i am not taken to the web page, but rather to the next slide.
how do i avoid this? how do i make keynote follow the hyperlink -- i.e. open the webpage during the presentation?
many thanks in advance for your tips.use '_blank' as parameter, not '_self'.
Guy Dallaire (guest) wrote:
: Hi,
: We would like to open a Web Page from a forms running in
: client/server as well as from a form runningover the web.
: Over the web, we plan to use SHOW_DOWUMENT (Even tough it
seems
: broken, on forms 6.0, the only way we have got it working was
by
: using the parameter that overwrites the current page (the
form),
: we cannot have it open an URL in another window)
: In C/S mode, the SHOW DOCUMENT does not work. What is the
proper
: way to lauch an URL in a browser in C/S mode ?
: Is there a way to determine if we're running in CS mode or Web
: Mode ? We would like to use the same code both on the web and
in
: C/S
: Example pseudo code:
: if (Running in CS Mode) then
: open the URL using C/S method
: else
: open the URL with show dowument
: fi
: Thanks
null -
This problem only started recently.
Opening another web page (URL) from my homepage always opens in the same tab and the "go back one page" button is gray and does not work. If I open a series of web pages in the same tab the green "back" button is green. Clicking on the "recent pages" down arrow will allow me to go back, but only to the page after the home page.
In other words, after browsing, I can get back to the opening page (my home page) only by clicking on the house icon but not by using the "recent pages" function.
Is there an option that changed after the last update?Do you see any tab history if you right click the Back or Forward button?
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
Invoke protected url from code
We are trying to invoke the protected url to the pdf stored on the webserver from the J2EE application code. We are passing the ObSSOCookie as a querystring parameter while invoking the pdf url from the code. But it gives the following error:
PDF header signature not found
If we try to invoke the non-protected url to the pdf, the code is able to fetch the corresponding file. The issue is with fetching the protected pdf.
Appreciate any assistance / pointers to resolve this.You can make a URLConnection to that other site.
http://java.sun.com/j2se/1.5.0/docs/api/java/net/HttpURLConnection.html
http://www.javaworld.com/javaworld/jw-03-2001/jw-0323-traps.html -
How to call a URL from forms ?
Dear All,
I would like to invoke / call a URL from forms. I know we can make a call Using Web.show_document. But this will execute in a browser.
What i need to do is, i have to send a request to by calling an URL, that should not visible to any body.
This is my requirement, please help if you know.
Thanks
Balajihi,
here is a quick example : (data from url returns as a clob. you need to write it at db. and call from forms.)
FUNCTION Get_DataFromUrl(pUrl IN VARCHAR2,pProxy IN VARCHAR2,pData IN OUT CLOB) RETURN NUMBER IS
vRcv UTL_HTTP.HTML_PIECES;
vData CLOB;
eNoDataReceived EXCEPTION;
BEGIN
UTL_HTTP.SET_DETAILED_EXCP_SUPPORT(TRUE);
-- Get data pieces from Url
vRcv := UTL_HTTP.REQUEST_PIECES(pUrl,Proxy => pProxy);
IF vRcv.COUNT < 1 THEN
RAISE eNoDataReceived;
ELSE
-- Append varchar2 table data into clob variable
DBMS_LOB.CreateTemporary(vData,FALSE,DBMS_LOB.CALL);
FOR i IN 1..vRcv.COUNT LOOP
DBMS_LOB.WriteAppend(vData,LENGTH(vRcv(i)),vRcv(i));
END LOOP;
-- Copy local data into return variable
DBMS_LOB.Copy(pData,vData,DBMS_LOB.GetLength(vData));
DBMS_LOB.FreeTemporary(vData);
END IF;
RETURN SUCCESS;
EXCEPTION
WHEN eNoDataReceived THEN
RETURN FAILURE;
WHEN UTL_HTTP.INIT_FAILED THEN
RETURN FAILURE;
WHEN UTL_HTTP.Request_Failed THEN
RETURN FAILURE;
WHEN OTHERS THEN
RETURN FAILURE;
END Get_DataFromUrl;
hope this helps.
Engin. -
Hello.
I have: a link, a report, a form
When I set the link on a column on the report, it calls the form. (I also have edited the link so that the primary key columns are passed as parameters to the form to provide UPDATE/DELETE.)
What I want to do is: Once the user submits the form, the form should redirect to the page where the report was displayed, and pass the parameters that were on that previous page. (basically, go back to where the user came from--exact url, which shows the update on the report) Does anyone know how to do this?
The best solution would be for the form to open on the same page, then the form automatically refreshes the same url. Any ideas?
(I have been looking at it too long, need fresh eyes/thoughts.!)
Thanks!
Robin
Message was edited by:
robin.millerTake a look at this thread, I think it'll help you.
How to get page url from a Dynamic Page? -
Hi,
I need to invoke a URL from a bpel process.
what is the best way to do that?
i would like to send the URL as is and not build it in the process
thanks
amityou can use our http binding/ shown in 702.BIndings/http tutorial ..
does this fit your needs. clemens -
Hi I'm trying to display a menu from a table, and then I want to mark the current page in that menu by reading the url of the current page.
This is what i've got so far:
DECLARE
loc Varchar2(40);
BEGIN
loc := htp.script('document.url');
htp.print('<table border=1>');
for rec in (select id, name, parent_id, url from fgj_menu where parent_id=0) loop
HTP.print ('<tr>');
HTP.print ('<td><a href="' || rec.url || '">' || rec.name || '</a></td></tr>');
for rec2 in (select id, name, parent_id, url from fgj_menu where parent_id = rec.id) loop
if rec2.url = loc then
HTP.print ('<tr>');
HTP.print ('<td> >> <a href="' || rec2.url || '">' || rec2.name || '</a></td></tr>');
else
HTP.print ('<tr>');
HTP.print ('<td> <a href="' || rec2.url || '">' || rec2.name || '</a></td></tr>');
end if;
end loop;
END LOOP;
htp.print('</table>');
END;fails on 4th line :
loc := htp.script('document.url');Any suggestions?
Message was edited (format edits) by:
BotzyHi Botzy
You can put your javascript code in an HTML portlet, but I prefer to put a page under htdocs, it's much easier to develop, and then use an url item that displays the url directly in the page.
About the code :
var xhr_object = null;
if(window.XMLHttpRequest) // Firefox
xhr_object = new XMLHttpRequest();
else if(window.ActiveXObject) // IE
xhr_object = new ActiveXObject("Microsoft.XMLHTTP");
xhr_object.open("POST", "/portal/pls/portal/my_schema.my_proc", true);
xhr_object.onreadystatechange = function()
if(xhr_object.readyState == 4) alert(xhr_object.responseText);
xhr_object.setRequestHeader("Content-type", "application/x-www-form-urlencoded");
xhr_object.send('p_param1=value1&p_param2=value2');
That's really simple to use, you just have to change the name of your proc and its parameters, and you'll get what it "htp.prints". Be sure to grant exec to public on you proc.
By the way, I've just imagined an even more simple solution :
- do not pass any param to your procedure. Let it just write always the same code whatever the page it is on
- identify each entry of your menu with a javascript id, for instance
<table>
<tr><td id="url1">page 1</td></tr>
<tr><td id="url2">page 2</td></tr>
etc...
Then use a small javascript code at the end of your page with something lie this :
document.getElementById(document.location.href).style = a different color
or
document.getElementById(document.location.href).innerHTML = something different
or whatever you want. -
Question about "Get Web Drawing URL and Page Name From" for Visio Web Access
I am trying to get both the web drawing URL and the page name from a list through Share Point Designer 2013, but it doesn´t work.
It looks fine when a do the web part connection wizard. I select from which columns to get the URL and the page name. But on the final web part page nothing happens. It just shows the URL that is selected in the Visio Web Access Web part. I had hoped that
that value should be overrided by the SPD-settings.
I have googled for hours..Hello,
I have now saved the Visio-file in .vdw-format, but it says Visio 2010 Web Drawing (*.vdw). Is there a .vdw-format for 2013? Isn´t that the .vsdx-format?
Still doesn´t work with the .vdw-format, but maybe I am doing something wrong.
Any ideas? -
Code to call another Page Flow URL from one page flow URL
Can anyone send me the code to call another pageflow url from one page flow URL.
thanks...
In my appication there is no Form page. Only based on Canvas in that ,
i implemented Text box, Text Field And Drop down list etc..by own coding without using any abstract methods.
I did every thing with in single Midlet file.While developng goes on i got the problem ,
Like "your application exceeds the memorylimit you cant
use more than 32Kb of byte code in Canvas"...
So the application is not opened.
I tried to call the next file in same package to proceed, i got it. codition goes to next file, but its not return back to the Main(MIDlet) file, throws the excepton as "Security exception".
How to solve this problem,is any other way? please... -
How do I remove a url from "Always view this page in IE"
How do I remove a URL from "Always view this page in IE"?
After the new server is added to the cluster and the AG, remove the old one by first
ALTER AVAILABILITY GROUP [YourAG]
REMOVE REPLICA ON N'OldServer';
Remove a Secondary Replica from an Availability Group
Then evict the old server from the cluster with the cluster administrator or
Remove-ClusterNode OldServer
Remember to verify the quorum configuration after adding the new server and removing the old server.
David
David http://blogs.msdn.com/b/dbrowne/ -
When I open some pages, another web site opens. I want to block that site and its URL from opening.
BlockSite extension.
https://addons.mozilla.org/firefox/3145/ -
Pass the product ID through the URL from the checkout page to the "receipt - buy" landing page. is it possible?
You can just the module_shoppingcartsummary module and with liquid you can render the items in the cart out.
Developer reference -
How to get requested (target) URL from login page jsp.
Hi,
How can I get requested (target) URL from within login jsp page where unauthenticated user was redirected.
IN other words I need to get target URL that user requested before he was redirected to login page.
In Weblogic there is "j_target_url" session attribute for this purpose.
Does NetWeaver have analogue?
Thanks in advance.hi Alex,
NWDS provides Authentication through Pre defined properties,
We can trap unauthorised user.
To know more about this,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4ecd6eb1-0301-0010-61bd-a3d6bee102c0
thank you
Maybe you are looking for
-
Questions on ATP Check, RLT & Planning
Hi, I have a couple of issues regarding ATP checks and Planning, and I was wondering if anyone could help. 1. We have a setup right now where we are using standard SAP availability check with Replenishment Lead time. In the Purchasing, we might have
-
Hi there, I'm just got an assignment that need to set up a Java Server. I don't know how to start? May anyone help me?
-
Oracle Database Express Edition 2 Day Plus Java Developer Guide??
I posted in the JDeveloper forum, as well as sending email via your feedback link found on the tutorial but I am a little disappointed by this: The Oracle® Database Express Edition 2 Day Plus Java Developer Guide has some errors in it. in Windows, I
-
HT1212 My iPhone is disable but I've used the correct password ?
I had the iOS 7 and when I updated my phone to the iOS 7.0.4 It then asked me to set up a passcode so I did when I tried to unlocked my phone it didn't let me no it's disabled for too many attempts AND I KNOW IM USING THE RIGHT PASSCODE help please I
-
Cisco Prime - Custom Inventory Change Report?
Hi, Cisco Prime has this report: Reports > Inventory > 24-hour Inventory Change The problem is that the Report reports things that I don't want to track, like changes in "NVRAM Used", Interface Speed, etc... Is it possible to configure Inventory Cha