IOS 8.2 And bluetooth keyboard troubles.

After the upgrade to iOS 8.2 my iPad air2 and iPhone 6 do not recognize the apple bluetooth keyboard anymore. Restart does not work. and when I try to connect a notification is made that the connection cannot be made.
Does anyone now how to fix this?

Hello JHvL,
As I understand it your iPhone isn't able to connect to your bluetooth Apple keyboard after updating to iOS 8.2 even after a restart. I would use the troubleshooting in the following article to help you resolve that issue, named:
iOS: Troubleshooting Bluetooth connections
Thank you for using Apple Support Communities.
All the best,
Sterling

Similar Messages

  • HT204387 which profile allows communication between iOS 4/later and Bluetooth Health Monitor(such as Fetal Heart Rate/Motion/respiration etc. )

    which profile allows communication between iOS 4/later and Bluetooth Health Monitor(such as Fetal Heart Rate/Motion/respiration etc. )

    Thank you!
    We are developing a monitor with Bluetooth 4.0 moudle, also programing an iOS App for this wireless monitor. We want to transfer the monitor data to iphone/ipad(which installed the App) through bluetooth.
    As you know, many bluetooth device are not allowed to connect to iphone/ipad through bluetooth. So I'd like to know that which of the iOS supported bluetooth profies should I use when programing, to ensure the monitor can connect to the Apple device and upload data. Of course, if they can connect successfully, both of the monitor and Apple device would be acknowledged "connected".

  • Mac Mini and Bluetooth Keyboard and Mouse

    I have a Mac Mini as a server. I've decided to do a clean install of Mountain Lion and Mountain Lion Server. I don't have any wired keyboard or mouse and am having trouble getting the Mac Mini to see the keyboard and mouse. I can buy cheap wired ones but I'd like to use my bluetooth ones if at all possible. Can anyone offer some tips for doing this successfully? I need a method that assumes I have a Mac Mini with a clean, formated disk and a bootable flash drive with the latest copy of Mac OS X Mountain Lion.

    I did unpair the mouse. The keyboard has only ever beenpaired with the Mac Mini. Today I was finally able to get both devices talking with the Mac Mini, but I really don't know how I did this. I just played with turning them on and off. If the Mac Mini has been newly formatted (as I finally managed to you), is the pairing information retained?
    I'm thinking there is more to this issue than just bluetooth pairing.
    Thanks for your quick reply. (I'm still redownloading Mountain Lion from the Apple store and making a new bootable flash drive as the one I had won't let me install. Not sure why.)
    (If the issue is just one of pairing it would appear I don't need a wired mouse and keyboard.)

  • Mac Mini first boot and bluetooth keyboard not recognised

    Hi Apple Support Community-
    I have just purchased a brand new Mac Mini and App Wireless Keyboard.  Unfortunately upon first boot, the Mac Mini is requesting I connect my bluetooth keyboard by switching it on, however even though the green light flashes, after the 5 second startup acknowledgement, there is no response from the Mac Mini.
    To confirm the keyboard is working, I have successfully paired it with my MacBook.  I do not have a USB Keyboard or Mouse and without purchasing additional hardware, do you have any suggestions to work around this problem?
    Thanks, Julian

    Hi Julian,
    Sometime a Mac can't pickup the connection of a bluetooth keyboard or mouse is normal. Whatever your Mac is brand new or not.
    I will do the following if the brand new Mac can't pickup the bluetooth connection, but make sure the bluetooth keyboard and mouse is not yet paired with other computer, that means you have to un-pair the keyboard and mouse from your MacBook before you perform the follow step:
    - Switch off the Mac
    - Switch off the Keyboard and Mouse which not yet paired with other computer, remove its battery, and re-install the battery after 10 seconds
    - Switch on the Keyboard and Mouse first, make sure both devices have a green light flashes (the light flashed at intervals, like a pulse **...**...sorry my poor English), that means the devices is discoverable.
    - Switch on the Mac asap if all the bluetooth keyboard and mouse is ready, and let the Mac pair both device (according the screen instruction)
    If the method still doesn't work, the worst case is: i'm afraid you have to connect wired keyboard and mouse to finish the Setup Assistant, and pair both bluetooth devices by Bluetooth Preferences. Once both bluetooth devices connected, disconnect wired keyboard and mouse.

  • Messages and bluetooth keyboard send button?

    Is there any solution out there to be able to hit the send button on an iPad with the wireless bluetooth keyboard?

    I just came up with a solution to this problem that is cheap, and in my case free. I went to the office supply cabinet and fished out the big kind of clip. (http://www.officedepot.com/a/products/963439/OIC-Large-Binder-Clips-2-Wide/?cm_c at=2000000351) The black kind with the wings/handles that flip down. Turned the keyboard off first, since the clip will depress two keys, and clipped the clip around the round part of the keyboard affording a little over hang so nothing can easily depress the power button.

  • Migration Assistant, Target Disk Mode and Bluetooth Keyboards

    Wanted to migrate my iMac setup to a new MBP last night. Kept trying to start up my iMac in target disk mode and it would only boot normally not in TD. Finally realized that my bluetooth keyboard was the culprit in that it wasn't connected once the iMac shut off for the restart. Thankfully I had a wired keyboard; plugged it in and migration went as advertised. Nowhere (that I could find) in the Migration Asst. prompts does it mention anything about needing a wired keyboard to restart as a TD. Did I miss something basic? If not, shouldn't Apple make mention of this to avoid confusion and frustration?
    BTW, the new MBP rocks!

    Yes, that tidbit of info is buried in a support article, as is some other Migration Assistant documentation. But it would be far better if the app had its own comprehensive, searchable Help built into it, just like most other apps from Apple. Note that when you launch Migration Assistant, there isn't even a Help menu, nor are there any question mark in purple circle icons in its windows to offer context sensitive help.
    Basically, that's what I requested in my feedback to Apple.

  • IPad and Bluetooth Keyboard

    My iPad no longer responds generally to the Apple Bluetooth Keyboard. I have changed the batteries, disconnected and reconnected via Bluetooth, restarted the iPad, and even tested the Keyboard on the MacBook Pro, with which it works fine. However, on the iPad I am only able to type the connection code for Bluetooth, and use the 'Brightness' and Volume buttons. Nothing else works. I cannot type after it has been connected. Any suggestions?

    Dadof2Girls wrote:
    1. Does anyone know if the keyboard dock comes apart so that you can use the dock stand alone?
    It doesn't look like it in the pictures.
    2. If the answer to question #1 is NO, does anyone know if you can use the non-keyboard dock without it being hooked to AC power?
    You should be able to but we'll know for sure in March. You could also just buy a case that doubles as a stand.

  • 10.6.7 upgrade and bluetooth keyboard/Magic trackpad

    Since doing the upgrade to 10.6.7 i have issues with bluetooth keyboards/trackpads not being seen by the Mac Mini i own. I must fiddle around with the mouse and keyboard and EVENTUALLY it will be seen. This happens on boot every time. Once it is discovered, all works fine until the next boot.
    I have deleted and added the devices to the bluetooth configuration, reset the sram, cleaned permissions, etc. Nothing has helped.
    Any pointers to resolving this issue once and for all would be appreciated.
    thanks

    I have the same problem with bluetooth now after upgrading to 10.6.7. The bluetooth hardware is no longer recognized at all. Nothing works to get it back so far. I tried PRAM resets and SMC resets several reboots with nothing working.... I took the computer MacBookPro just purchased a few days ago.... into the Apple store and they are ordering new bluetooth hardware because even their test program does not see the Bluetooth hardware any more. But I do not think the hardware is bad because it was working just fine until I updated the system software. I think Apple has a major software bug going on in this update based upon the number of users with the same problem as me. The bluetooth hardware may need to be removed and reinstalled. I have not tried that yet. Please advise if a fix is found...For now using USB keyboard and mouse as bluetooth is no longer recognized at all.
    [email protected]

  • After installing Mavericks, I have intermittent problems working with Wacom Intuos 4 and bluetooth keyboard.

    I use Photoshop extensively with a Wacom Intuos 4 and Apple bluetooth keyboard, and have had no problems (as below) before.
    Each time I use the tablet, the keyboard gets intermittently unresponsive, and it will only respond again after I tap the tablet pen on the tablet. And sometimes after repeatedly tapping the pen on the tablet.
    It gets so frustrating as I use the keyboard to change Photogshop tools etc, and everytime it doesn't response I have to do the tapping again.
    Appreciate some sharing of solutions, if any.
    Thank you.

    I'm having the same issue and its very frustrating.
    I use Photoshop and Flash heavily at work, but can't use my wacom at all anymore because:
    its seems Shift gets stuck and everything becomes highlighted
    shortcut keys won't work
    when I drag out rectangle shapes the corners automatically become curved and eventually my rectangle becomes a circle
    I will click on a keyframe and the actions panel will automatically pop up
    when I try to move objects they duplicate.
    More things happen but those are the ones I can think of off the top of my head. When I switch to a regular usb mouse the issues don't occur. I've tried uninstalling the driver and reinstalling and the issues still occur. Its completely slowed down my productivity and is starting to hurt my wrist now :\
    Nice to know that someone else has a similar problem at least. Hopefully apple or wacom will come out with a fix soon.

  • Question regarding Windows 7 w/iMac and bluetooth keyboard + mouse

    I installed Windows 7 Home Premium, thru Boot Camp 3.0. My iMac 10.6.8 restarts w/a black screen. After reading the previous posts, I guess this is b/c I am using a bluetooth keyboard/mouse. Will any corded keyboard/mouse work or does it have to be an apple product? I am hours away from the Apple store, and in a very remote area. I could try to find someone with a PC corded keyboard/mouse if it would work.

    Helps to have wired kb/mouse until BT and drivers installed.
    Even a tech article here http://www.apple.com/support/bootcamp
    Any will do. I use a lot of 3rd party kb and always use MS optical mice. Apple puts their own firmware in some keyboards which I don't understand and can cause problems of their own.
    It isn't what OS you run as much as what model year the iMac.

  • TS1559 iOS: Wi-Fi and Bluetooth settings grayed out or dim

    I have done everything from "Reset Network Settings" to "Erase All Content and Settings" and finally restoring the iOS Software (7.0.6), but the Wi-Fi settings are still grayed out. Bluetooth is also not getting enabled. Can anyone suggest what can be done?

    Powell360 wrote:
    This has happened to me very recently too. Is it a know hardware issue or do we need an update?
    Follow this article: iOS: Wi-Fi settings grayed out or dim
    If that fails to resolve the issue, follow this article: iOS: How to back up your data and set up your device as a new device
    If that fails, the device has a hardware fault.

  • Obvious problem with ios 8.02 and Bluetooth

    So....just like every one else out there my and my wife's new iphone 6 with IOS 8.02 will not connect properly to either of our cars - Chevy volt and Mini Countryman. Yes I deleted phone, reset, re-paired and reset the phones numerous times. This is unsafe and unacceptable. Apple needs to fix this problem. In California it is illegal to talk on the phone without hands free Bluetooth. I find it unbelievable that they did not find this out and fix this prior to the release of the software update. Please update to fix so everyone can once again use their cars Bluetooth safely or do we now have to buy apple cars to make it work?

    Um....iOS 8.1 came out Monday and it specifically says the update addresses issues with Bluetooth connectivity.  And lot's of people have already reported their Bluetooth headaches went away with iOS 8.1.  Have you updated to 8.1?

  • Ipad2 and bluetooth keyboard wrong characters typed

    After the pairing and testing, when I typeded some stuff, but it is not the right keystrokes, EX: shift + 8 should be "*" but shift + 8 is "(".  So some of the shift with a keystroke is changed now and dont know how to change it back.

    I thought I was tripping but was definitely sure. If I did Shift + = you should get a '+' but nope it was nothing.
    As for the keyboard (http://store.apple.com/us/product/MC184).  Also my setting is all correct for the USA standard qwerty setup.

  • I just updated to the new IOS 7.1, and my keyboard is frozen. I can't type anything and it does come up, but ten minutes later. i tried resetting my settings, but that didn't work either. Help??? i can't do anything on my phone that includes typing

    This has been going on for a while. Its annoying, does anyone know how to solve this? Do i have to go to the genius bar?

    have you restarted the iPhone? if not, press and hold both the sleep and home button until screen goes black and apple logo come up, then release them. Let me know if that helped.

  • N8 & BlueNext Mini Bluetooth Keyboard

    I have a BlueNext BN1000 Mini keyboard which I have paired with my N8 but some of the keys are not being recognised by the phone: eg: Shift key won't work if you want to type a capital letter followed by a lowercase one & ome other key functions requiring the Shift key are not working. I have keyboard set to UK but have also tried US-English. The keyboard came with various Symbian S60 drivers but the N8 either said it had them or that they were not compatible when I tried to download them.  I would like to have the keyboard fully functional if possible as I can type much better with it than the rather cramped onscreen option.  Is there anything more I can do?
    Thanks.
    Solved!
    Go to Solution.

    @tjdo
    Unfortunately there seem to be quirks with whatever Bluetooth keyboard is used apart from Apple Bluetooth keyboard where UK keyboard can be chosen from selection available. Even Nokia's SU-8W is not immune to such issues as can't type "y" as keep getting "z" instead as referrred to in my post here:/t5/Nseries-and-Symbian-Smartphones/N8-and-bluetooth-keyboard-mouse/m-p/972815/highlight/true#M26055...
    Happy to have helped forum with a Support Ratio = 42.5

Maybe you are looking for

  • BOE XI 3.1 + SAP Integration Kit on AIX 5.3 with WebSphere 6.1 (SOLVED)

    Hi everybody! On a recent installation I encountered a problem with SAP Integration Kit using BW Query with prompts; I want to share with you what I did to solve this problem: First of all, the environment: IBM Server with AIX 5.3 BO Repository on DB

  • Why does itunes 10.5 keep opening and how can I stop this annoying behavior?

    Has anyone else had this problem and do you know of a solution?

  • URGENT: REGARDING SALES ORDER REPORT

    HI, I making a report on sales order in which i have to display the      sales order no,date,customer no,date,material issued to customer,date of issue,invoice no,date,quantity,amount of invoice. can anbody tell what are the tables used for making di

  • New bug in the latest update 12.2

    Hi, the latest after effects doesnt save audio output settings. It always revert back to 8.000 khz for sound quality Is this something others are experiencing as well ?

  • Rsync in PKGBUILD sources

    I am trying to write a PKGBUILD for which the sources are not available as a single tarball/zip/etc., but can be downloaded (e.g.) using rsync -avz.  While an URI of rsync:// in the sources array is understood, it does not trigger archive (-a) mode,